summaryrefslogtreecommitdiff
path: root/baseboard
Commit message (Expand)AuthorAgeFilesLines
* zork: Increase PD max power to 60WEdward Hill2020-02-121-1/+1
* zork: Disable Host command and Fan channelsRaul E Rangel2020-02-111-0/+2
* morphius: add PWM CH0 for LED controlZick Wei2020-02-112-36/+0
* trembyle: initialize PS8811 after AP rail is highDenis Brockus2020-02-112-3/+14
* Waddledee: Initial board fileDiana Z2020-02-113-1/+93
* volteer: enable minimum power requirementKeith Short2020-02-101-0/+9
* kukui: inform AP DP status by USB_MUX eventEric Yilun Lin2020-02-101-7/+17
* juniper: implement otg functionTing Shen2020-02-101-2/+10
* volteer: Increase I2C bus speeds for USB C0 and C1Keith Short2020-02-071-4/+2
* zork: remove hard off check for charger sensor tempDenis Brockus2020-02-071-12/+0
* hatch: Define CONFIG_MKBP_EVENT_WAKEUP_MASK as 0Tim Wawrzynczak2020-02-061-0/+4
* trembyle: adjust gain on USB-A ps8811 for gen2 speedsDenis Brockus2020-02-062-0/+27
* zork: wake up ps8802 before tuning gain adjustmentDenis Brockus2020-02-061-0/+5
* zork: adjust retimer gain adjustmentsDenis Brockus2020-02-061-75/+17
* dedede: Override power_signal_get_level()Aseda Aboagye2020-02-051-0/+17
* dedede: Change PP3300_A PGOOD update methodAseda Aboagye2020-02-053-2/+77
* Charger: Convert boards to use new driver structureDiana Z2020-02-047-0/+101
* volteer/intelrvp: Enable "pe" console commandVijay Hiremath2020-02-042-0/+2
* volteer: add USB3 daughterboard supportstabilize-12881.B-masterCaveh Jalali2020-02-042-6/+79
* honeybuns: Initial skeleton EC imageScott Collyer2020-02-043-0/+75
* PS8818: use read/modify/write for regs with reserved bitsDenis Brockus2020-02-011-40/+50
* ps8802: fix redriver configurationDenis Brockus2020-01-311-0/+59
* ps8818: fix redriver configurationDenis Brockus2020-01-311-0/+97
* waddledoo: Change PP1050_ST power goodAseda Aboagye2020-01-312-11/+3
* volteer: Enable USB4.0 modeVijay Hiremath2020-01-311-0/+3
* hatch: Use GPIO and host event when generating MKBP eventsTim Wawrzynczak2020-01-301-1/+1
* volteer: enable link time optimizationKeith Short2020-01-301-0/+1
* intelrvp: Enable PD 3.0 supportVijay Hiremath2020-01-301-0/+4
* volteer: enable PD 3.0 supportKeith Short2020-01-291-0/+6
* hatch: Add board specific override for board_get_pd_port_location()Tim Wawrzynczak2020-01-281-0/+13
* volteer: Enable low power modeKeith Short2020-01-281-0/+1
* usb_mux: cleanup: Replace mux state enums with ec_command bit flagVijay Hiremath2020-01-284-27/+30
* Volteer: move USB product ID to baseboardstabilize-12859.B-masterKeith Short2020-01-241-0/+7
* volteer: use CBI for board ID and DB configCaveh Jalali2020-01-242-0/+72
* zork: PS8802/PS8818 dynamic detection cleanupDenis Brockus2020-01-231-77/+120
* volteer: enable PD_CONTROLCaveh Jalali2020-01-231-0/+2
* jinlon: enable OTI502 IR temperature sensorDevin Lu2020-01-221-0/+3
* dedede: Add z-state supportAseda Aboagye2020-01-211-0/+9
* waddledoo: Add LED supportAseda Aboagye2020-01-212-0/+14
* waddledoo: Add keyboard supportAseda Aboagye2020-01-213-3/+37
* waddledoo: Add Type-C, PD, and charging supportAseda Aboagye2020-01-211-0/+69
* usbc: hpd_deadline cleanupDenis Brockus2020-01-163-25/+9
* retimer: framework cleanup for chip specific control configDenis Brockus2020-01-163-13/+40
* kukui: support DP UFP_U pin modeEric Yilun Lin2020-01-151-1/+2
* Waddledoo: Add sensor supportDiana Z2020-01-141-20/+21
* trembyle: enable audio codecTzung-Bi Shih2020-01-141-0/+5
* zork: fix mux hpd_update crashDenis Brockus2020-01-141-2/+6
* zork: don't double flip when using PS8802 retimerDenis Brockus2020-01-131-14/+72
* board: sensor: remove identity matricesGwendal Grignou2020-01-132-30/+6
* volteer: add keyboard backlight supportKeith Short2020-01-112-0/+13
View Lorry Controller Status