| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CL:2031650 increased stack used by tcpci_tcpm_init(), which caused
stack overflow on boards using the ANX7447.
BUG=b:149708491, b:150339191
BRANCH=none
TEST=fixes EC stack overflow crash on boot, AP boots ok
Change-Id: I29c4e2ccce1f3ac1ee125563e4367c4e7d8ea21e
Signed-off-by: Edward Hill <ecgh@chromium.org>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2068800
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Shelley Chen <shchen@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes retimers appear as generic muxes. By allowing a
chain of muxes they can be stacked up to the new configurations
that zork requires and will continue to work as they did before
on configurations that only have a single mux.
The code used to have two different arrays, 1) muxes and 2)
retimers. On one of the zork configurations the processor
MUX stopped being the primary mux and the retimer took its
place. In a different configuration of that same platform
it left the primary and secondary alone but the mux_set
FLIP operation had to be ignored. Since the same
interfaces needed to be available for both it stopped making
sense to have two different structures and two different
methods of handling them. This consolodates the two into
one.
The platforms that do not have retimers, this change will
not make any difference. For platforms like zork, it will
remove the retimers and make them chained muxes. So
testing on trembyle makes sense to verify,
BUG=b:147593660
BRANCH=none
TEST=verify USB still works on trembyle
Change-Id: I286cf1e302f9bd3dd7e81098ec08514a2a009fe3
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066794
Commit-Queue: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the CONFIG_SYSTEM_UNLOCKED option configurations and
enable CONFIG_USB_PD_COMM_LOCKED as the device is going to ship.
BRANCH=hatch
BUG=b:149708496
TEST=flash on akemi and PD communication did not negotiate (when
WP was asserted)in RO but did RW.
Change-Id: I17db430c5599a5f51168f946c2e264e5b88e0795
Signed-off-by: xiaoqiang.zhu <xiaoqiang.zhu@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2062108
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit-Queue: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The TI fuel gauge firmware has an issue where it will enter sleep mode when
the following occur:
1) no SMBUS communication,
2) current load less than
10mA for more than 20 seconds. This is the same technique that Octopus
used to workaround the issue.
BUG=b:148822924
BRANCH=firmware-hatch-12672.B
TEST=ODM verified this keeps the fuel gauge from sleeping
Change-Id: I00c3aa089b04fce39ebdcaaf6a94c5416f9bc24e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2062177
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Morgen Zhu <xiaoqiang.zhu@bitland.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Check for a convertible SKU before turning off the keyboard in the
switch to tablet mode. See go/hatch-skus for the list.
BUG=b:125936966
BRANCH=firmware-hatch-12672.B
TEST=On Kohaku, artificially force SKU to both convertible and
non-convertible SKUs, switch to tablet mode, and then check whether
Alt-Volup-R reboots the EC.
Change-Id: Id29644c4e050705203b860324f14b1b87bc4ccf4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2047630
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The action_delay_sec field hasn't actually been referenced by
any code since 2013. Removing the corresponding struct field.
BUG=None
BRANCH=None
TEST=builds
Change-Id: Ia7334c26b85d0161ff61bb51fbdda61bb921595a
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2054945
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In order to meet the time requirements of charging
when power off. Need enable battery fast charging when
power off, and disable fast charging when power on.
BUG=b:146540037
BRANCH=master
TEST=Check the charging current of the three batteries,
the maximum charging current is about 3325mA in S0 state and
in power off states is about 6650mA.
Change-Id: Ia3e2988c9b4ec83f7410746bb6a81e307025f0c6
Signed-off-by: xiaoqiang.zhu <xiaoqiang.zhu@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1982939
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Required by Android CDD - Section 7.3.1 - Paragraph C.1.4
Modified mechanically with:
for i in $(grep -lr "\.default_range" board); do
sed -i '/.default_range =/s#\(.*\.default_range = \).* /\
\* g.*#\14, /* g, to meet CDD 7.3.1/C-1-4 reqs */#' $i
done
Manually reworked to only change the accelerometer that matters to
android:
The lid accelerometer or the base accelerometer if the base also hosts
the gyroscope.
This is only for future EC, no need to land the change on branches:
mems_setup will take care to set accelerometer ranges at 4g on startup.
BUG=b:144004449
BRANCH=none
TEST=compile
Change-Id: If8c14b2e928c9c70c0ce51451adcfcd674a9e73b
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1957375
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Alexandru M Stan <amstan@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/"
This reverts commit 89197aceaf26ccf33b143c7a5e95eb07ba4c7464.
Reason for revert: It is not necessary to change the PD setting, so revert it.
Original change's description:
> hatch: refactor PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/
>
> 1) The four config is determined by board, move it into board.h.
> 2) Update the config variables above for stryke.
>
> BUG=b:145257655
> BRANCH=hatch
> TEST=make buildall
>
> Change-Id: I1dd6a4f2a78b5196006821bc5d2686f68206c2e1
> Signed-off-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1950270
> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Bug: b:145257655
Change-Id: Ib2cb2db51b15f0974d2b22ef8e0e3e6d4e6b60d6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1958299
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
Commit-Queue: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
Tested-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_EC_FEATURE_BOARD_OVERRIDE is deprecated by CL:1951810.
Signed-off-by: dnojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: I2e8a66b47bb5a29184dae0d7ba56381f5b1f59e4
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1960490
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Auto-Submit: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Akemi supports keyboard backlight by default, but the
new SKU does not support keyboard backlight.
We need to increase sku_id to distinguish whether
keyboard backlight is supported. So, enable ec feature
flag override to report keyboard backlight feature by sku_id.
BUG=b:144815890
BRANCH=master
TEST=Boot akemi boards, press Alt+Brightness-Up/Down to change
keyboard backlight, it has no function on sku_id=1/2, and it
works fine on sku_id=3/4.
Change-Id: I081256be210fd004332f01771ad05d2f06f9f131
Signed-off-by: xiaoqiang.zhu <xiaoqiang.zhu@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1950007
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: Cherish Wang <cherish.wang@bitland.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1) The four config is determined by board, move it into board.h.
2) Update the config variables above for stryke.
BUG=b:145257655
BRANCH=hatch
TEST=make buildall
Change-Id: I1dd6a4f2a78b5196006821bc5d2686f68206c2e1
Signed-off-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1950270
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:144886704
BRANCH=hatch
TEST=make buildall
Change-Id: I0d520a5c375a2b47c55a335da91f556ccfd59c29
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1928422
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is an error where SYS_RST_ODL is assigned to GPIO02 where it is
actually assigned to GPIOC5 in the schematics. This should cause AP
reset to fail from the ec console.
BUG=b:141476349
BRANCH=hatch
TEST=None (I don't have a hatch board to test this out on)
Change-Id: I855a65489ce974ee92be4bf51a83d5af40e4e2da
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1928421
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change refactors the lsm6dsm to allow building without the
use of the FIFO or sensor interrupts.
BUG=None
BRANCH=None
TEST=make buildall
Change-Id: I5b338d81061f25fd1c8209b4555f63ea4d8b2dbc
Signed-off-by: Yuval Peress <peress@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1916679
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Auto-Submit: Leifu Zhao <leifu.zhao@intel.corp-partner.google.com>
Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It was pointed out to me that the fans config list was non-const, but
there is only 2 boards that require non-const configuration, so
by default make it const, but allow an override.
BRANCH=none
BUG=None
TEST=EC compiles, make tests, buildall
Change-Id: I3ef8c72f6774e1a76584c47d89287f446199e0f2
Signed-off-by: Andrew McRae <amcrae@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1893025
Reviewed-by: Andrew McRae <amcrae@chromium.org>
Tested-by: Andrew McRae <amcrae@chromium.org>
Commit-Queue: Andrew McRae <amcrae@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Certain SKUs of certain boards have lesser number of USB PD ports than
defined by CONFIG_USB_PD_PORT_COUNT. Hence rename
CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNT.
BUG=b:140816510, b:143196487
BRANCH=octopus
TEST=make -j buildall; Boot to ChromeOS
Change-Id: I7c33b27150730a1a3b5813b7b4a72fd24ab73c6a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1879337
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split the configuration option CONFIG_HOSTCMD_ESPI_VW_SLP_SIGNALS into
separate options controlling SLP_S3 and SLP_S4. Allow volteer to
configure SLP_S3 as a GPIO and SLP_S4 as an eSPI virtual wire. Cause a
build error if virtual wires are configured, but eSPI is not.
BUG=b:139553375,b:143288478
TEST=make buildall
TEST=Build volteer with CONFIG_HOSTCMD_ESPI_VW_S4 defined but
CONFIG_HOSTCMD_ESPI undefined; observe build error
BRANCH=none
Change-Id: I8c6737e2ccb1a77a882e5fa65c6eddb342209b61
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1881758
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This CL enables the config option CONFIG_USB_PD_TCPM_ANX7447_AUX_PU_PD
for hatch variants that have the ANX7447 TCPC.
BUG=b:124410548
BRANCH=None
TEST=On hatch, connect external monitor,usb device or CCD cable to
type-c port0. Verifed each worked as expected.
Change-Id: I7cd6ce65dac42dffd41a0f75fc844b634d7d312f
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1788333
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Nitin Kolluru <nkolluru@google.com>
Commit-Queue: Scott Collyer <scollyer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Akemi board adds a g753 temp sensor on EC i2c port 4.
BUG=b:138426009, b:143046086
BRANCH=none
CQ-DEPEND=CL:1857978
TEST=use akemi board, add g753 as temp sensor, boot the board
and make sure temperature can be read from g753
Change-Id: I2ae663b19e92d2f4d702818ed28004aae98fa045
Signed-off-by: Lu Zhang <lu.zhang@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1857979
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Simplo updated L19M4PG2 battery specifications and its minimum
voltage and precharge current changed.
BUG=b:143162679
BRANCH=none
TEST=boot akemi board with Simplo battery, charging/discharging/
cutoff work as expected.
Change-Id: Iad3fbb2308d82a287eb6c1cc40a9786b148cb36f
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1875859
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The rotation matrix needs be filled out into standard reference frame.
BUG=b:143045241
BRANCH=none
TEST=Using ec console 'accelinfo on' verified lid angle now goes
from 0 to 360 and swtiches to tablet mode after crossing 180 threshold.
Change-Id: I615ac3c582f7deec681c638a79b59324c9b69584
Signed-off-by: Lu Zhang <lu.zhang@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1871276
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change GPIO_EC_PCH_SYS_PWROK to GPIO_PCH_SYS_PWROK on cometlake to
conform with naming convention used on other Intel processors.
Leave gpio.inc files unchanged and add a mapping from
GPIO_EC_PCH_SYS_PWROK to GPIO_PCH_SYS_PWROK in the board files.
BUG=none
BRANCH=none
TEST=make buildall -j
TEST=boot kohaku
Change-Id: I722cb06dd90ee5d7e426664508f54a5cbe19de4a
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1848251
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Akemi support three batteries:
- LGC: L18L4PE0
- SUNWODA: L19D4PG2
- SMP: L19M4PG2
This CL add the support of them.
BUG=b:141621369, b:141660298
BRANCH=none
TEST=boot akemi board with battery, charging/discharging/cutoff
work as expected.
Change-Id: I8735f6a0bcd90abc4923d98b2d337ca41b9f12c7
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1831717
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The run-time selection for en_pp5000_a is only needed for Hatch rev0.
Akemi doesn't need it.
BUG=b:141399038
BRANCH=none
TEST=boot akemi
Change-Id: Ibd26b85b69cbcd4e7c9c6b39fa453399246fcefc
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1817024
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit-Queue: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This CL changes the interrupt handler for EC_RSMRST_L gpio to use
intel_x86_rsmrst_signal_interrupt. This interrupt handler reduces the
propagation delay for high->low signal transitions.
BUG=b:132421681
BRANCH=None
TEST=make buildall
Change-Id: I00420347fad84b876688e8d8a7ede9093e11ccaf
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1772482
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Scott Collyer <scollyer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Akemi uses standalone power led and battery led behavior need
be changed to agree with project led behavior definition.
BUG=b:139839740
BRANCH=none
TEST=flash ec to akemi board, observe led behavior to make
sure it agrees with spec definition.
Change-Id: Idc667f6edc7e3e04f3c852444e78cd71d38e66c7
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1765109
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is useful when debugging PROCHOT# related issues.
BUG=b:139034279
BRANCH=None
TEST=Verified that gpioget shows the state of PROCHOT# on helios.
Change-Id: I771743b181620189263246daa424b2bdf76b59b6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1768925
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Akemi do not support ALS sensor and MST, this patch will remove
what we do not need.
BUG=b:139839740
BRANCH=none
TEST=flash ec code to akemi board, the board boot successfully.
Change-Id: I2811c26d5ecfcddc6cf906e445dd3c11069c93bc
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1763898
Reviewed-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Akemi use lis2dwl as lid sensor and lsm6ds3tr-c as base sensor.
This patch enable both of them. lis2dwl works in forced mode.
BUG=b:138978278
BRANCH=none
TEST=boot Akemi board, use command 'accelinfo on' to see sensor
output, make sure the data are correct.
Cq-Depend: chromium:1741598
Change-Id: I6ff19e388c74d95b8287b9899a81d2a3f866939e
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1741106
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update board files for akemi, flapjack, hatch, kohaku,
and kukui to use new field names in als_calibration_t and
als_channel_scale_t.
BUG=b:124512628
BRANCH=master
TEST='make buildall' of the EC, verified builds succeed.
Cq-Depend: chromium:1633269
Change-Id: I7ee324ce3de3377cd1538b631f4ec6294d2e9078
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1711958
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All the hatch platforms had a typo with the config option guarding the
configuration of the SLP_S3_L and SLP_S4_L signals. Changed
CONFIG_HOSTCMD_ESPI_VW_SIGNALS to CONFIG_HOSTCMD_ESPI_VW_SLP_SIGNALS.
BUG=b:139198212
BRANCH=none
TEST=make buildall -j
Change-Id: I96c01fb8e1903585f3bc19a30b2f9c0596e9edad
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1745655
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This initial content of akemi is taken after hatch. It will need to
be revised later.
BUG=b:138879565
BRANCH=none
TEST=make -j BOARD=akemi
Change-Id: Iae84e5b908e678165311147356f65f61270bfda9
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1679849
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Tested-by: Paul Ma <magf@bitland.corp-partner.google.com>
Tested-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
|