summaryrefslogtreecommitdiff
path: root/board/ampton
Commit message (Expand)AuthorAgeFilesLines
* ampton: increase tasks stackDino Li2020-08-201-3/+3
* PD: Remove unnecessary PDCMD taskDiana Z2020-05-201-1/+0
* ampton: change sku id 3,4 for g-sensor BMA253 in the lidJames_Chao2020-04-303-12/+43
* driver: Replace BMI160 to BMI in board configChing-Kang Yen2020-04-231-6/+6
* Revert "Ampton: Set the PS8751 to source mode before enter low power mode"Matthew Blecker2020-03-071-2/+2
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-282-9/+13
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-6/+3
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-2/+2
* board: Set min/max frequency attributesGwendal Grignou2019-12-091-0/+2
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-012-2/+2
* tablet_mode: Renaming for GMR sensorPhilip Chen2019-09-192-2/+2
* Remove __7b, __8b and __7bfDenis Brockus2019-07-201-5/+5
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-191-5/+5
* cleanup: Segregate USB MUX related drivers in usb_mux folderVijay Hiremath2019-07-171-1/+1
* ampton: tune the dp mux to improve external monitor compatibilityJames_Chao2019-05-071-0/+16
* common: led_onoff_states: move forward baseboard led_state to common codeDevin Lu2019-04-201-1/+1
* ec.tasklist: Consolidate duplicate commentsDaisuke Nojiri2019-04-081-14/+1
* common: bit change 1 << constants with BIT(constants)Gwendal Grignou2019-03-261-1/+1
* motion: Define macros for custom eventsGwendal Grignou2019-03-201-2/+4
* Ampton: Correct HPD GPIOsDiana Z2019-03-011-2/+2
* ampton: cleanup: Put all sensor defines togetherGwendal Grignou2019-02-281-9/+9
* Ampton: tune the gyro axis and directionJames_Chao2019-02-271-1/+7
* Ampton: correct thermistor reading functionDiana Z2019-02-132-8/+2
* Ampton: Set the PS8751 to source mode before enter low power modeJames_Chao2019-01-251-2/+2
* Ampton: tune motion sensorsJames_Chao2019-01-231-1/+7
* Ampton: add battery configuration for C424James_Chao2019-01-182-0/+28
* apel: lower input voltage to 5V when battery fullJett Rink2019-01-171-1/+27
* USB PD: PPC: Add overcurrent handling.Aseda Aboagye2019-01-171-1/+1
* octopus: convert boards to use hardware intJett Rink2019-01-102-3/+1
* octopus: reduce all octopus sensor fifo sizesJett Rink2019-01-051-6/+0
* Ampton: Remove CONFIG_SYSTEM_UNLOCKEDDiana Z2019-01-051-3/+0
* Ampton: modify the led behavior when battery errorJames_Chao2018-12-181-2/+2
* Ampton: Implement the functions about ar cameraJames_Chao2018-12-053-4/+32
* gpio: Add configuration for EC_PCH_RTCRST GPIO in octopus boardsKarthikeyan Ramasubramanian2018-12-051-1/+1
* Ampton: change the port0 mux to PS8751James_Chao2018-12-032-1/+39
* tablet_mode: Introduce hall sensor specific handlingFurquan Shaikh2018-11-292-2/+2
* Ampton: Modify LED behavior to follow CoralJames_Chao2018-11-221-9/+9
* Ampton: Correct accel sensor base reference dependent on sensor locationJames_Chao2018-11-211-8/+6
* Ampton: enable the interrupt for GPIO_BASE_SIXAXIS_INT_LJames_Chao2018-11-192-1/+7
* Ampton: add sku id for convertible skuJames_Chao2018-11-151-2/+3
* SN5S330: treat interrupts as level-sensitiveDiana Z2018-11-131-0/+8
* Apel: add battery configurationJames_Chao2018-11-072-0/+28
* Ampton: add initial motion sensor codeDiana Z2018-10-313-3/+183
* Ampton: add battery configurationJames_Chao2018-10-232-3/+29
* Ampton: implement the LED function to follow BipJames_Chao2018-10-193-1/+78
* Ampton: config the charger ic VARIANT_OCTOPUS_CHARGER_ISL9238James_Chao2018-10-111-1/+1
* Ampton: confirm thermistor partsDiana Z2018-10-081-1/+0
* bc12: rename bq24392 driver to max14637Scott Collyer2018-10-021-1/+0
* Ampton: create initial EC imageDiana Z2018-09-146-0/+417