summaryrefslogtreecommitdiff
path: root/board/careena/gpio.inc
Commit message (Collapse)AuthorAgeFilesLines
* careena/barla: enable 2nd TCPC source PS8755 for port 1Devin Lu2020-09-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch adds one more TCPC PS8755 in the port 1. These two are all supported by ps8xxx.c and the board function board_get_ps8xxx_product_id is implemented to judge the source by checking TCPC ID pin. BUG=b:157298401, b:158983814 BRANCH=firmware-grunt-11031.B TEST=Verify DUT with PS8755 or PS8751 in the sub-board can work correctly in sink and source roles. Verify USBC charger is able to charging. Change-Id: I867e925ee5bb54597ba09539743a0048c220e298 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2393407 Reviewed-by: Edward Hill <ecgh@chromium.org> Commit-Queue: Edward Hill <ecgh@chromium.org> (cherry picked from commit 09fd4554bfbc055f67a7a51a4858b27f6bebc878) Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2404907
* Grunt: Add GPIO_LOCKED to EC_RST_ODL PSL inputEdward Hill2019-10-221-1/+1
| | | | | | | | | | | BRANCH=grunt BUG=b:143095616 TEST=GPIO is locked as input Change-Id: I36b123ed068db268d1cd02e990dd720663eaae57 Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1873008 Reviewed-by: Keith Short <keithshort@chromium.org>
* grunt: Wake from hibernate on EC resetEdward Hill2019-06-141-2/+7
| | | | | | | | | | | | | | | Add GPIO_EC_RST_ODL to hibernate_wake_pins[] for Aleena + Careena + Liara since the HW supports this as a PSL wake input. BUG=b:122833270 BRANCH=grunt TEST='dut-control cold_reset:on cold_reset:off' with ServoV2 Change-Id: I24a878be5e2c822b052a7d65b1964dcb6ed2ce94 Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1658524 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Diana Z <dzigterman@chromium.org>
* careena, liara, aleena: Remove motion sensing supportJonathan Brandmeyer2018-10-041-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | These members of the grunt family do not include any motion sensors. Remove them entirely, both to save space and to disable some factory tests. build/aleena/RW/space_free_flash grew by 12716 bytes: (62400 to 75116) build/aleena/RW/space_free_ram grew by 9888 bytes: (30272 to 40160) build/careena/RW/space_free_flash grew by 12864 bytes: (61664 to 74528) build/careena/RW/space_free_ram grew by 9856 bytes: (30304 to 40160) build/liara/RW/space_free_flash grew by 12724 bytes: (61364 to 74088) build/liara/RW/space_free_ram grew by 9856 bytes: (30272 to 40128) BRANCH=grunt BUG=b:115649135 TEST=boot Careena. Observe that `ectool motionsense` returns an INVALID COMMAND error, and that the EC console shows no attempt is made to communicate with the sensors. Change-Id: I322978fc80e36b999e77f9e3d54b175c6814fdcf Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1262099 Reviewed-by: Edward Hill <ecgh@chromium.org>
* grunt: Remove no longer needed GPIO_EN_PP5000Edward Hill2018-10-021-3/+0
| | | | | | | | | | | | | | | The BQ24392 driver was renamed to MAX14637 (CL:1250031) and no longer requires GPIO_EN_PP5000 to be defined (CL:1250032), so this can be removed from grunt-family gpio.inc. BUG=none BRANCH=grunt TEST=make -j buildall Change-Id: I186ece073e544760d487489f874659226c820bd8 Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1257644 Reviewed-by: Scott Collyer <scollyer@chromium.org>
* grunt family: Provide pu/pd for port 1 BC1.2Jonathan Brandmeyer2018-07-311-2/+2
| | | | | | | | | | | | | | | | | | | Port 1 is provided by a daughterboard. In the event that the daughterboard is disconnected, these pins are floating. Pull them in the appropriate direction for their logic when the board is disconnected. BUG=b:111942717 BRANCH=none TEST=make -j buildall; Test startup on Careena hardware both with and without port 1 connected to the mainboard. Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Change-Id: Ica06ea16c2c76c624c542ba9b803197a4fd852bd Reviewed-on: https://chromium-review.googlesource.com/1155713 Commit-Ready: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Tested-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
* careena: Correct GPIO_SYS_RESET_L pin definition.Jonathan Brandmeyer2018-07-191-2/+1
| | | | | | | | | | | | | | | | | | Caveat: Careena early generation hardware was reworked to a state which does not map SYS_RESET_L to any pin on the EC. This change updates the config to the next hardware gen. TEST=make -j buildall, schematic review BRANCH=none BUG=b:111593365, b:109874594 Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Change-Id: Icb1ca7ccbacd98f960e4f44041281d1b2ca94e6e Reviewed-on: https://chromium-review.googlesource.com/1142236 Commit-Ready: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Tested-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* grunt, careena: Clean up GPIO alternate functions.Jonathan Brandmeyer2018-07-131-13/+13
| | | | | | | | | | | | | | | | The NPCX only supports two modes per pin: Peripheral function or GPIO. The chip and its driver do not support alternate peripheral functions. TEST=buildall -j BRANCH=none BUG=b:79686781 Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Change-Id: Ib5d7ba81b5224ed9c121887d664dac659962b2c2 Reviewed-on: https://chromium-review.googlesource.com/1136942 Commit-Ready: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Tested-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* careena, grunt: Enable pullup for the lid switch.Jonathan Brandmeyer2018-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | In the case that the lid switch becomes loose/disconnected, default to the 'lid open' state by pulling up the GPIO. Grunt is not affected, but we want to demonstrate best practices for the grunt family with its configuration. BUG=b:110836185 BRANCH=none TEST=disconnected lid switch on careena and observed lid state remained open and stable. Reconnected lid switch and observed lid state followed physical lid position. Change-Id: I951594ed7f6d98cf1b5258a894d0b95b6ca98ecc Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1115859 Commit-Ready: Martin Roth <martinroth@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* stoney: Rename GPIO_PCH_RCIN_L to GPIO_SYS_RESET_LJonathan Brandmeyer2018-06-051-1/+1
| | | | | | | | | | | | | | Pin rename only; no functional changes. See also b/72426192 for earlier functional changes. BUG=b:77301519 TEST=make -j buildall BRANCH=none Change-Id: I18e71118e584a5b36ba001bac24951929d2c93ff Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1087207 Reviewed-by: Edward Hill <ecgh@chromium.org>
* grunt: Board specific battery infoEdward Hill2018-06-011-1/+1
| | | | | | | | | | | | | | | | | | | Split battery info between baseboard and board, following the Octopus example. This will allow Grunt and Careena to define their own lists of supported battery types. This also adds CONFIG_BATTERY_REVIVE_DISCONNECT support, and checks the charge/discharge FET status. BUG=b:79704826,b:74018100 BRANCH=none TEST=Grunt still boots ok. Change-Id: I6e82ac5e48f9aabf59b63add253108513f0a6b60 Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1072039 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Jett Rink <jettrink@chromium.org>
* careena: Change LED colorsEdward Hill2018-05-251-1/+3
| | | | | | | | | | | | | Careena has non-PWM White/Orange LEDs. BUG=b:79704826,b:79894166 BRANCH=none TEST=make -j buildall Change-Id: Ie85de84fbd6e4ac4c6139d8407a7a25b5f6d5e7e Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1072898 Reviewed-by: Jett Rink <jettrink@chromium.org>
* careena: Make GPIOs match hardwareEdward Hill2018-05-251-14/+6
| | | | | | | | | | | | | Update GPIO definitions for Careena to match hardware. BUG=b:79704826 BRANCH=none TEST=make BOARD=careena Change-Id: I755e5fd8123eefdfa8d30ca2314435c28340e488 Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1070989 Reviewed-by: Jett Rink <jettrink@chromium.org>
* grunt: Move common code to baseboardEdward Hill2018-05-251-0/+121
Move code that will be common to Grunt and Careena to baseboard to avoid duplication when creating the Careena board. Add Careena board files. These are currently just a copy of Grunt and will be modified for Careena next. BUG=b:79704826 BRANCH=none TEST=Grunt still boots ok. Change-Id: I6dd0035bdd62e92a7f3664120fc6ac3f23a0af4d Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1070988
View Lorry Controller Status