summaryrefslogtreecommitdiff
path: root/board/fizz
Commit message (Expand)AuthorAgeFilesLines
* Remove __7b, __8b and __7bfDenis Brockus2019-07-202-6/+6
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-192-6/+6
* cleanup: refactor CPRINTF("[%T ...]\n") to CPRINTSJack Rosenthal2019-07-171-1/+1
* intel_x86/power: Consolidate chipset specific power signals arrayVijay Hiremath2019-06-132-26/+0
* TCPC: Make tcpc_config handle other bus typesDaisuke Nojiri2019-06-101-2/+8
* tcpm: Refactor tcpc_config to include a flags fieldScott Collyer2019-04-171-2/+2
* ec.tasklist: Consolidate duplicate commentsDaisuke Nojiri2019-04-081-14/+1
* Fizz: Apply VR1 fix for all variantsDaisuke Nojiri2019-03-301-10/+8
* Fizz: Teemo PMIC TPS650830 VR1 setting for hang up issueSue Chen2019-03-301-0/+11
* common: bit change 1 << constants with BIT(constants)Gwendal Grignou2019-03-261-3/+3
* common: replace 1 << digits, with BIT(digits)Gwendal Grignou2019-03-261-1/+1
* Fizz: Set initial fan speed to 50%Daisuke Nojiri2018-11-191-0/+2
* Fizz: Add Jax supportDaisuke Nojiri2018-11-192-19/+26
* usb-c: use higher priority task for interruptsJett Rink2018-11-141-7/+1
* Fizz: Remove remote temp sensor 2Daisuke Nojiri2018-09-202-8/+6
* chgmgr: Allow charge_manager_update_charge to accept NULLDaisuke Nojiri2018-09-201-2/+1
* ss-mux: remove unused port_addr initializationv2.0.0Jett Rink2018-09-171-1/+0
* usb-c: add high priority tasks for interruptsJett Rink2018-09-171-0/+1
* ss-mux: update semantics for TCPC/MUX only used as MUXJett Rink2018-09-051-3/+2
* servo_v4: add per port dualrole settingNick Sanders2018-08-151-2/+2
* espi: Rename CONFIG_HOSTCMD_ESPI_VW_SIGNALS to CONFIG_HOSTCMD_ESPI_VW_SLP_SIG...Furquan Shaikh2018-07-273-5/+5
* Fizz: Add Wukong for BJ configurationDaisuke Nojiri2018-06-142-5/+9
* Fizz: Add Bleemo for BJ configurationDaisuke Nojiri2018-06-131-0/+1
* Fizz: Add fan table for BleemoDaisuke Nojiri2018-06-122-0/+2
* Fizz: Move BJ adapter spec table to ECDaisuke Nojiri2018-06-082-43/+96
* Fizz: Add fan for WukongRyan.Zhang2018-06-072-34/+82
* Fizz: add CONFIG_BOARD_HAS_RTC_RESETRyan Zhang2018-06-072-0/+9
* Fizz: Increase VR3 voltage to avoid boot failureDaisuke Nojiri2018-05-301-0/+9
* fizz: Enable optimized SHA256/RSA in RO onlyNicolas Boichat2018-05-291-0/+6
* espi: rename remaining eSPI optionsJett Rink2018-05-233-5/+8
* espi: convert all eSPI board to use CONFIG_HOSTCMD_ESPIJett Rink2018-05-221-2/+1
* npcx: CEC: Event-handling for incoming messagesStefan Adolfsson2018-05-111-1/+2
* npcx: CEC: Add stub implementation of CECStefan Adolfsson2018-05-111-0/+1
* Fizz: Add GPIOs used for CECStefan Adolfsson2018-05-102-0/+7
* fizz/nami: Use chipset_pre_init_callbackFurquan Shaikh2018-04-192-2/+2
* system: update board version to return an error if encounteredJett Rink2018-04-191-3/+1
* chgstv2: Check charger power in prevent_power_on.Aseda Aboagye2018-04-102-3/+3
* cleanup: CONFIG_USB_PD_CUSTOM_VDM is not usedDivya Sasidharan2018-04-091-1/+0
* Fizz: Log DP mode entry and exitDaisuke Nojiri2018-03-201-0/+4
* npcx: remove optional CONFIG_PECI since no one is using it with npcxJett Rink2018-03-071-1/+0
* fan: Allow board to configure fans at run timeDaisuke Nojiri2018-03-061-11/+16
* npcx: Conforming CONFIG_UART_HOST define to match intentionJett Rink2018-03-061-1/+0
* host_command: Count suppressed host commands individuallyDaisuke Nojiri2018-02-162-8/+2
* CBI: Make data offset and size variableDaisuke Nojiri2018-02-161-2/+2
* Fizz/CBI: Buid cbi-util as host-utilDaisuke Nojiri2018-02-161-27/+0
* Fizz: Update thermal table by projectRyan Zhang2018-02-081-14/+44
* Fizz: Monitor input current (version 2.0)Daisuke Nojiri2018-02-083-82/+100
* Fizz: Uprev board version to 2.2Daisuke Nojiri2018-02-081-1/+1
* Fizz/CBI: Create CBI blobsDaisuke Nojiri2018-02-061-0/+27
* Enable PD communication in RO for external displayDaisuke Nojiri2018-02-032-13/+15
View Lorry Controller Status