summaryrefslogtreecommitdiff
path: root/board/fleex/board.h
Commit message (Collapse)AuthorAgeFilesLines
* syv682x: Fix name for option to disable CC passthroughKeith Short2021-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | Change the name to disable CC passthrough on the SVY682x PPC from CONFIG_SYV682X_NO_CC to CONFIG_USBC_PPC_SYV682X_NO_CC to match the naming convention of other PPC options. This also corrects a non-fatal error in the firmware-eq CQ about a new ad-hoc EC config option. BUG=b:193195946 BRANCH=none TEST=zmake testall TEST=make buildall Signed-off-by: Keith Short <keithshort@chromium.org> Change-Id: I66abcdddb7735f210fa25ed7c8b5760d8d626026 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3015866 Reviewed-by: Denis Brockus <dbrockus@chromium.org> Reviewed-by: Yuval Peress <peress@chromium.org> Commit-Queue: Yuval Peress <peress@chromium.org>
* Octopus: Re-enable VCONN sourcing from TCPCEric Herrmann2021-03-031-0/+2
| | | | | | | | | | | | | | | | | | | The SYV682 shouldn't have VCONN supplied to its host side CC pins, but on Octopus these pins aren't used and the TCPC must provide VCONN. Since this is a non-standard configuration, make an exception for these Octopus boards by defining a new SYV682 flag to indicate that it does not pass through CC. BUG=b:180973460 TEST=make buildall BRANCH=None Signed-off-by: Eric Herrmann <eherrmann@chromium.org> Change-Id: I043b6025abbeeaaf9e261d2721da3aed5483e177 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2721234 Reviewed-by: Keith Short <keithshort@chromium.org> Reviewed-by: Marco Chen <marcochen@chromium.org>
* Fleex: enable 2nd ppc source syv682xMatt_Wang2020-11-171-0/+5
| | | | | | | | | | | | | | | | | This patch adds 2nd ppc source syv682x base on GPIO97 status. BUG=b:160139798 BRANCH=octopus TEST=The GPIO97 high can switch PPC from NPX to syv682x code. Change-Id: If813ed6993338981417d7271bf0920f15bdb5e1a Signed-off-by: Matt_Wang <Matt_Wang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2291451 Reviewed-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Reviewed-by: Marco Chen <marcochen@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Tested-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Commit-Queue: Matt Wang <matt_wang@compal.corp-partner.google.com>
* Fleex: Implement new SMP-COS polymer battery parameterMatt_Wang2020-07-231-0/+1
| | | | | | | | | | | | | | | | | | | Fleex support SMP-COS3.63 polymer battery. This patch makes EC configure battery parameters differently based on manufacturer name. BUG=b:156798102 BRANCH=octopus TEST=Verify battery can charge/discharge and can do battery-cutoff via ectool "batterycutoff" and can wake up from battery-cutoff. Change-Id: I5f5b082342e5a834314af34480d726bae155ed27 Signed-off-by: Matt_Wang <Matt_Wang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2304231 Reviewed-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Reviewed-by: Marco Chen <marcochen@chromium.org> Tested-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Commit-Queue: Marco Chen <marcochen@chromium.org>
* fleex: Change adjust charge max sleep time to 10selthanhuang2019-10-161-0/+11
| | | | | | | | | | | | | | | Change CHARGE_MAX_SLEEP_USEC to 10 seconds. BUG=b:133375756 BRANCH=octopus TEST=Verify access battery once per 10 seconds by ec console. Change-Id: I273ec13381d131866c536b879f5a912a63a53ecb Signed-off-by: elthanhuang <elthan_huang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1852864 Reviewed-by: Jett Rink <jettrink@chromium.org> Commit-Queue: Jett Rink <jettrink@chromium.org> Tested-by: Jett Rink <jettrink@chromium.org>
* Fleex: Set minimum battery level for Try.SRC and resetsDiana Z2019-07-021-0/+10
| | | | | | | | | | | | | | | | | | | Some battery and fuel gague combinations for fleex are unable to withstand the loss of a charger's Vbus signal when they are reporting 1% charge. This change increases the Try.SRC battery required, and also prevents the PD state machine from starting reset timers until the battery is at 2%. BUG=b:128935567 BRANCH=octopus TEST=verified hard resets don't occur on grabbiter when system is locked and coming back from battery cutoff with low battery, verified soft followed by hard reset later occurs when battery passes config level Change-Id: Ia0eca111daaf6b63f71c397231de4cfa30e34b8c Signed-off-by: Diana Z <dzigterman@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1606742 Reviewed-by: Jett Rink <jettrink@chromium.org>
* common: led_onoff_states: move forward baseboard led_state to common codeDevin Lu2019-04-201-1/+1
| | | | | | | | | | | | | | | | | Now we have led_onoff_states instead of led_state of baseboard, to avoid duplicate file so move forward to common code. BUG=b:126460269 BRANCH=none TEST=make buildall -j, make sure led behavior on meep intended as well. Change-Id: I3adf20ebf2efd2f02b1ae101faf1c36f2f5ed454 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/1556869 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Marco Chen <marcochen@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Diana Z <dzigterman@chromium.org>
* common: bit change 1 << constants with BIT(constants)Gwendal Grignou2019-03-261-1/+1
| | | | | | | | | | | | | | | | | Mechanical replacement of bit operation where operand is a constant. More bit operation exist, but prone to errors. Reveal a bug in npcx: chip/npcx/system-npcx7.c:114:54: error: conversion from 'long unsigned int' to 'uint8_t' {aka 'volatile unsigned char'} changes value from '16777215' to '255' [-Werror=overflow] BUG=None BRANCH=None TEST=None Change-Id: I006614026143fa180702ac0d1cc2ceb1b3c6eeb0 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1518660 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* motion: Define macros for custom eventsGwendal Grignou2019-03-201-1/+2
| | | | | | | | | | | | | | Define macros to define custom events used by sensor interrupt handlers. Remove CONFIG_ for activity events. BUG=none BRANCH=none TEST=compile, sensors work on eve. Change-Id: I08ef6ed2a004466ebc5f7650d6952a150b9de713 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1272189 Reviewed-by: Jett Rink <jettrink@chromium.org>
* Fleex: Implement new polymer battery parametermatt_wang2019-02-281-0/+6
| | | | | | | | | | | | | | | | | | | | | Fleex support BYD/LGC/SIMPLO/SWD new polymer battery This patch makes EC configure battery parameters differently based on manufacturer name. BUG=b:122944526 BRANCH=octopus TEST=Verify BYD/LGC/SIMPLO/SWD polymer battery can charge/discharge and can do battery-cutoff via ectool "batterycutoff" and can wake up from drain battery/battery-cutoff Change-Id: Id5db1653cb4d2c36143b45abfa2472fe20c1edfb Signed-off-by: matt_wang <matt_wang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1490797 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Tested-by: Matt Wang <matt_wang@compal.corp-partner.google.com> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Matt Wang <matt_wang@compal.corp-partner.google.com> Reviewed-by: Jett Rink <jettrink@chromium.org>
* octopus: convert boards to use hardware intJett Rink2019-01-101-3/+0
| | | | | | | | | | | | | | | | | | Recent kernel changes expect the EC to use a dedicated interrupt pin from the EC to the AP to notify the AP of pending sensor data (instead of using an eSPI "interrupt"). The octopus boards have this hardware support, we just need to enable the EC use it. BRANCH=octopus BUG=b:122552125,b:120679547 TEST=perform sensor tests on various octopus boards Change-Id: I2bd3ffe14947d5f1ec71acbb53fcac962b007cf9 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1403103 Reviewed-by: Enrico Granata <egranata@chromium.org>
* octopus: reduce all octopus sensor fifo sizesJett Rink2019-01-051-6/+0
| | | | | | | | | | | | | | | | Too large of a FIFO causes jitter in the sensor timestamp which can cause issues during batch CTS tests. BRANCH=octopus BUG=b:120508077 TEST=everything builds. Test with smaller fifo were done on bobba. See CL:1387348 Change-Id: If67a46faa6e136006a20ac243b826b7ce06d9868 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1392425 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
* ocotpus: move VBUS_ADC config to baseJett Rink2018-11-191-6/+2
| | | | | | | | | | | | | | | | All boards but yorp have added the ADC hardware support back for VBUS ADC measurements. Move code to common baseboard BRANCH=none BUG=none TEST=ADC measurements still works on phaser and fleex Change-Id: I36a7ba92df21de4c1188613c6a12da83fdba6eb6 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1337456 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-by: Diana Z <dzigterman@chromium.org>
* octopus: remove CONFIG_SYSTEM_UNLOCKED optionJett Rink2018-10-041-3/+0
| | | | | | | | | | | | | | | | | | | | For all NPCX boards, remove the CONFIG_SYSTEM_UNLOCKED option. The main affect of this will be to prevent PD communication in RO. We are starting to get into factory test that want to verify this behavior. As a developer, one must remember to jump to RW before PD will negotiate. BRANCH=none BUG=b:117109816 TEST=flash on fleex and RO did not negotiate (when WP was asserted) but RW did. Change-Id: I2df575baad95a334a4a57a9f81600fc039157fd5 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1258568 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Scott Collyer <scollyer@chromium.org>
* Fleex:Add define OCTOPUS_BATT_FUEL_LOW_LEDmatt_wang2018-10-041-0/+1
| | | | | | | | | | | | | | | | | | Flash amber led when the battery critical low and discharge. BUG=b:109872754 BRANCH=none TEST=Verify on Fleex will flash amber led when the battery critical low and discharge. Change-Id: Ia883ca179e868ef825879c6abe3681f1f7471288 Signed-off-by: matt_wang <matt_wang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1247722 Commit-Ready: Raymond Chou <raymond_chou@compal.corp-partner.google.com> Tested-by: Matt Wang <matt_wang@compal.corp-partner.google.com> Reviewed-by: Raymond Chou <raymond_chou@compal.corp-partner.google.com> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Diana Z <dzigterman@chromium.org>
* octopus: enable PSL for all NPCX variantsJett Rink2018-09-171-3/+0
| | | | | | | | | | | | | | | | | All NPCX variants support PSL mode in hardware now; enable this at the baseboard level. This is adding support for Bobba; other boards are unaffected BRANCH=none BUG=b:115677776 TEST=bobba goes into PSL Change-Id: I38974371b101c42841e4f11ba72b466415c754d9 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1227050 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
* fleex: Enable PSLFurquan Shaikh2018-09-141-0/+3
| | | | | | | | | | | | | | | | | | This change enables PSL hibernate mode on fleex by: 1. Selecting CONFIG_HIBERNATE_PSL 2. Configure alternate mode on PSL pins 3. Configuring EC_RST_ODL for wake BUG=b:115660922 BRANCH=None TEST=make -j buildall Change-Id: Ic0e31f7fd1cc18061a819a61a5d5a8badcaed2ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://chromium-review.googlesource.com/1225351 Commit-Ready: Jett Rink <jettrink@chromium.org> Tested-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
* octopus: consolidate identical definesJett Rink2018-09-041-4/+0
| | | | | | | | | | | | | | All of the octopus board define the table mode option the same, so move them into baseboard. BRANCH=none BUG=none TEST=fleex still works Change-Id: Ibed874a609a2e5947d7aee39f915dc3046a0cc19 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1204700 Reviewed-by: Furquan Shaikh <furquan@chromium.org>
* Fleex: Enable dynamic motion sensor count andelthanhuang2018-08-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | change disable the keyboard for convertible Get the motion sensor count by SKU motion_sensor_count on clamshells is 0. motion_sensor_count on convertibles is 2. lid_angle_peripheral_enable() function disable the keyboard for convertible systems. BUG=b:112286331 BRANCH=none TEST=Manual change SKUID to 0x21 for convertible and verified the motion sensor count and that the motion senors were initialized in the EC console log. change SKUID to 0x01 for clamshell and the motion senors were not initialized in the EC console log. Change-Id: Ic9d6c910c9e56479414d30f1e2c53d73515842af Signed-off-by: elthanhuang <elthan_huang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1192903 Commit-Ready: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Tested-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Reviewed-by: Diana Z <dzigterman@chromium.org>
* Fleex: Enable adc vbus sensingelthanhuang2018-08-171-0/+6
| | | | | | | | | | | | | | | | | | Enable adc vbus sensing ADC CH9 read real USB_PD_PORT_ANX7447 input voltage ADC CH4 read real USB_PD_PORT_PS8751 input voltage BUG=b:112576391 BRANCH=none TEST=Excute "ectool usbpdpower" to check SNK Charger PD voltage. Change-Id: Ia7ef58905219e0392e4ca4fba4694c144741b0a8 Signed-off-by: elthanhuang <elthan_huang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1177528 Commit-Ready: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Tested-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Reviewed-by: Jett Rink <jettrink@chromium.org>
* Fleex: Change define motion_sensors of LID_ACCELelthanhuang2018-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | and initial x,y,z-axis direction of lid and base g-sensor Enable CONFIG_ACCEL_LIS2DE and motion_sensors struct of LID_ACCEL meet LIS2ED12 accelerometer. Modify standard reference frame to fit Fleex shell design. (base_standard_ref and lid_standard_ref) BUG=b:112399626 BRANCH=none TEST=Use "ectool motionsense" to check sensor0/1/2 value. Use "watch -n 1 ectool motionsense" to check x,y,z-axis. 1. When x-axis face up, get x value of sensor0 and sensor1 more than 10000 2. When y-axis face up, get y value of sensor0 and sensor1 more than 10000 3. When z-axis face up, get z value of sensor0 and sensor1 more than 10000 Change-Id: I1f4409ef634ed4849aad7017cad598588b0637d9 Signed-off-by: elthanhuang <elthan_huang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1169040 Commit-Ready: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Tested-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Reviewed-by: Diana Z <dzigterman@chromium.org>
* Fleex: implement LED behaviorDiana Z2018-08-021-0/+2
| | | | | | | | | | | | | | | This change adds the charger LED behavior for fleex. Since fleex isn't actually using a power LED, removed the GPIO referencing it. BRANCH=none BUG=b:109872754 TEST=ran through all charger and power states on the fleex to confirm correct LED behavior Change-Id: Ia0952587075026c6e2cbe20dcd7ccc6746442df1 Signed-off-by: Diana Z <dzigterman@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1159355 Reviewed-by: Jett Rink <jettrink@chromium.org>
* Fleex: Update battery parameterelthanhuang2018-07-301-0/+3
| | | | | | | | | | | | | | | | | This patch makes EC configure battery parameters differently based on manufacturer name BUG=b:111330630,b:110076440 BRANCH=none TEST=Verify BYD/LGC/Simplo battery can be found via EC console Change-Id: Ic963dd203d89371dd6915992157c51398cf700d6 Signed-off-by: elthanhuang <elthan_huang@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1148023 Commit-Ready: Jett Rink <jettrink@chromium.org> Tested-by: Elthan Huang <elthan_huang@compal.corp-partner.google.com> Reviewed-by: Raymond Chou <raymond_chou@compal.corp-partner.google.com> Reviewed-by: Jett Rink <jettrink@chromium.org>
* Fleex: Enable volume control functionRaymond Chou2018-07-241-0/+5
| | | | | | | | | | | | | | | | | Add define EC_VOLUP_BTN and EC_VOLDN_BTN in gpio.inc and enable CONFIG_VOLUME_BUTTONS function in board.h BUG=b:111670874 BRANCH=none TEST=Verify volume control bar can be pop up and down. Change-Id: I0ef527b0023238c080c130ad86f98b88b03cfec2 Signed-off-by: Raymond Chou <raymond_chou@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1145149 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org>
* fleex: add initial firmware imageJett Rink2018-06-151-0/+91
The is based off of current yorp (V1) on ToT without the LED implementation. BRANCH=none BUG=b:110085182 TEST=builds Change-Id: Ic95fdf19be60637cf9effa8b34cb4659ad45952a Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1098020 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
View Lorry Controller Status