| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Different DB options may cause different numbers of charger chips to be
present on the system. Remove constant count for charger chips, and
instead always call into the overridable function to query the count.
BRANCH=None
BUG=b:155963446
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I0e65b8af351ecabe6f7b823e0e56f1932cc280a6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2277833
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
EFS2 boards need to call system_jumped_late in HOOK_INIT to avoid
running init code twice per boot.
system_jumped_to_this_image and system_jumped_late are functionally
equivalent for non EFS2 boards.
This patch will prevent system_jumped_to_this_image from being used
for EFS2 boards when code is copied from a past project.
BUG=chromium:1072743
BRANCH=none
TEST=buildall
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I73fb5cedc5325d1c80825f9346954013046ee1df
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2267685
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To support linking multiple bc12 drivers into ec binary, we have to
remove the common symbols in drivers.
This CL creates a bc12_drv structure to hold the original driver-specific
usb_charger_* functions, and implements common usb_charger_* functions
which whill dispatch the function call based on the information in
bc12_drv table.
Also add a CONFIG_BC12_SINGLE_DRIVER and enabled by default for
backward compatibility. If CONFIG_BC12_SINGLE_DRIVER is defined,
a default bc12_drv array with proper size and content will be created
for the board.
BUG=b:155611686
TEST=1) make buildall.
2) verify single driver mode on krane (rt946x) and juniper
(pi3usb9201).
3) verify multiple driver works on asurada, see CL:2189624 for
example usage.
4) verify single driver multi chip on blooglet.
BRANCH=none
Signed-off-by: Ting Shen <phoenixshen@google.com>
Change-Id: I8a96eda47c94aeb6cc150b498cfa1a6eefcc4a5b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2187080
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Ting Shen <phoenixshen@chromium.org>
Tested-by: Ting Shen <phoenixshen@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split ps874x.[ch] into ps8740.[ch] and ps8743.[ch]
since we need to support both at runtime for Dalboz.
I left PS8742 in ps8740.[ch] since it is not very different.
BUG=b:153454399
BRANCH=none
TEST=make -j buildall
Signed-off-by: Edward Hill <ecgh@chromium.org>
Change-Id: I92b02e08f377d1781c130a0bbe1482a936ad7a4d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2151647
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes retimers appear as generic muxes. By allowing a
chain of muxes they can be stacked up to the new configurations
that zork requires and will continue to work as they did before
on configurations that only have a single mux.
The code used to have two different arrays, 1) muxes and 2)
retimers. On one of the zork configurations the processor
MUX stopped being the primary mux and the retimer took its
place. In a different configuration of that same platform
it left the primary and secondary alone but the mux_set
FLIP operation had to be ignored. Since the same
interfaces needed to be available for both it stopped making
sense to have two different structures and two different
methods of handling them. This consolodates the two into
one.
The platforms that do not have retimers, this change will
not make any difference. For platforms like zork, it will
remove the retimers and make them chained muxes. So
testing on trembyle makes sense to verify,
BUG=b:147593660
BRANCH=none
TEST=verify USB still works on trembyle
Change-Id: I286cf1e302f9bd3dd7e81098ec08514a2a009fe3
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066794
Commit-Queue: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current use of the PD Config Flags are a bit confusing and
has been changed to the following:
The CONFIG_USB_POWER_DELIVERY flag is used to enable and disable
the TCPMv1 and TCPMv2 stacks. And when CONFIG_USB_POWER_DELIVERY
is enabled, one of the following must be enabled:
CONFIG_USB_PD_TCPMV1 - legacy power delivery state machine
CONFIG_USB_PD_TCPMV2 - current power delivery state machine
BUG=b:149993808
BRANCH=none
TEST=make -j buildall
Change-Id: Ie3f8615a75b15b4f1c703f57f3db9e152a471238
Signed-off-by: Sam Hurst <shurst@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2068519
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit removes the temporary common charger chip configuration and
instead puts the configuration in each board.
BRANCH=none
BUG=b:147672225
TEST=builds, runs on waddledoo and octopus
Change-Id: If81aef31e48c65999a87e202494f286716114bbb
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2031855
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the second half of b/147290482
Cleaning up to use pd_data_role instead of int
BUG=b:147314832
BRANCH=none
TEST=make buildall -j
Change-Id: I2445b06f5f5469fb1f3a968034a83e3ee792e7c7
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1991845
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a board specific usb_pd_policy.c file that contains a lot of
code for handling DisplayPort Alternate mode, Google Firmware Update
Alternate mode, as well as some PD policy functions such as deciding to
Accept or Reject a data role swap or a power role swap. Several boards
simply copy/paste this code from project to project as a lot of this
functionality is not actually board specific.
This commit tries to refactor this by pulling the functions that are not
mainly board specific into common code. The functions are made
overridable such that boards that truly do require a different
implementation may do so.
Additionally, this consolidation changes the policy behaviour for some
boards, but they should be for the better. Some examples include that
data swaps are always allowed if we are a UFP (no system image
requirement), power swaps are allowed to become a sink if we are no
longer dual role (e.g. - in suspend), and DisplayPort Alternate Mode is
not entered if the AP is off.
In order to facilitate this refactor, a couple CONFIG_* options were
introduced:
- CONFIG_USB_PD_DP_HPD_GPIO
/* HPD is sent to the GPU from the EC via a GPIO */
- CONFIG_USB_PD_CUSTOM_VDO
/*
* Define this if a board needs custom SNK and/or SRC PDOs.
*
* The default SRC PDO is a fixed 5V/1.5A with PDO_FIXED_FLAGS indicating
* Dual-Role power, USB Communication Capable, and Dual-Role data.
*
* The default SNK PDOs are:
* - Fixed 5V/500mA with the same PDO_FIXED_FLAGS
* - Variable (non-battery) min 4.75V, max PD_MAX_VOLTAGE_MV,
* operational current PD_MAX_CURRENT_MA,
* - Battery min 4.75V, max PD_MAX_VOLTAGE_MV, operational power
* PD_OPERATING_POWER_MW
*/
BUG=chromium:1021724,b:141458448
BRANCH=<as many as we can that are still supported>
TEST=`make -j buildall`
TEST=Flash a kohaku, verify that DP Alt Mode still works with a variety
of DP peripherals
TEST=Repeat above with a nocturne
TEST=Repeat above with an atlas
Change-Id: I18fd7e22dc77fe1dc6c21c38cd7f1bc53cae86cb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1949052
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
BRANCH=none
TEST=make buildall -j
Change-Id: I7fe9ab23254dbd8515936d10ad6782305e76236c
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1925173
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Certain SKUs of certain boards have lesser number of USB PD ports than
defined by CONFIG_USB_PD_PORT_COUNT. Hence rename
CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNT.
BUG=b:140816510, b:143196487
BRANCH=octopus
TEST=make -j buildall; Boot to ChromeOS
Change-Id: I7c33b27150730a1a3b5813b7b4a72fd24ab73c6a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1879337
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For all boards that defined CONFIG_CHARGER, CONFIG_CHARGER_V2 is also
defined. Remove references to CONFIG_CHARGER_V2 from board header files.
Replace CONFIG_CHARGER_V2 in common C modules with CONFIG_CHARGER when
appropriate.
BUG=b:139699769
BRANCH=none
TEST=make buildall -j
Change-Id: I6b54baf4ad2406bbed629b6b272dad9ea6a81280
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1789420
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The extentions were added to make the compiler perform most
of the verification that the conversion was being done correctly
to remove 8bit addressing as the standard I2C/SPI address type.
Now that the compiler has verified the code, the extra
extentions are being removed
BUG=chromium:971296
BRANCH=none
TEST=make buildall -j
TEST=verify sensor functionality on arcada_ish
Change-Id: I36894f8bb9daefb5b31b5e91577708f6f9af2a4f
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1704792
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Opt for 7bit slave addresses in EC code. If 8bit is
expected by a driver, make it local and show this in
the naming.
Use __7b, __7bf and __8b as name extensions for i2c/spi
addresses used in the EC codebase. __7b indicates a
7bit address by itself. __7bf indicates a 7bit address
with optional flags attached. __8b indicates a 8bit
address by itself.
Allow space for 10bit addresses, even though this is
not currently being used by any of our attached
devices.
These extensions are for verification purposes only and
will be removed in the last pass of this ticket. I want
to make sure the variable names reflect the type to help
eliminate future 7/8/7-flags confusion.
BUG=chromium:971296
BRANCH=none
TEST=make buildall -j
Change-Id: I2fc3d1b52ce76184492b2aaff3060f486ca45f45
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1699893
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently chipset specific power signals are defined at board/baseboard
level. These power signals are moved to chipset specific file to minimize
the redundant power signals array defined for each board/baseboard.
BUG=b:134079574
BRANCH=none
TEST=make buildall -j
Change-Id: I351904f7cd2e0f27844c0711beb118d390219581
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1636837
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, tcpc_config assumes TCPCs are on I2C bus. ITE's EC has an
embedded TCPC.
This patch adds bus_type field to struct tcpc_config_t so that a TCPC
location on other type of bus can be specified.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Ieac733011700b351e6323f46070dcf46d9e1154b
Reviewed-on: https://chromium-review.googlesource.com/1640305
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
tcpc_config contained a field for both the alert polarity and open
drain/push pull configuration. There is also a possible difference in TCPC
reset polarity. Instead of adding yet another field to describe this
configuration, it would be better to convert alert polairty, open
drain and reset polarity into a single flags field.
This CL modifies the tcpc_config struct to use a single flags field
and adds defines for what existing flag options can be.
BUG=b:130194031
BRANCH=none
TEST=make -j buildall
Change-Id: Ifb7e7604edb7021fb2d36ee279049eb52fefc99e
Signed-off-by: Scott Collyer <scollyer@google.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1551581
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's simply a bad idea to describe a macro in multiple locations.
It'll make it hard to change. It'll be difficult to keep all
locations in sync.
This patch replaces the comment duplicated in all ec.tasklist with
a pointer to the CONFIG_TASK_LIST definition. The macro will be
described in a single place (just like all/most other macros).
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Id658b9d68e742e4334c692b804d9c98c8de21313
Reviewed-on: https://chromium-review.googlesource.com/1551579
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Requested for linux integration, use BIT instead of 1 <<
First step replace bit operation with operand containing only digits.
Fix an error in motion_lid try to set bit 31 of a signed integer.
BUG=None
BRANCH=None
TEST=compile
Change-Id: Ie843611f2f68e241f0f40d4067f7ade726951d29
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1518659
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, charge_manager_update_charge does not handle NULL pointer
for struct charge_port_info any differently. It's not sanity-checked
either (thus memory access violation can occur).
This patch will make charge_manager_update_charge accept NULL pointer
and set available current and voltage to zero.
This also helps callers' intentions be clear because callers can
explicitly specify NULL (instead of passing a pointer to chg = {0},
which is initialized somewhere else).
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: I518662ab6a3a07f93da5d34cf62a6f856884f67d
Reviewed-on: https://chromium-review.googlesource.com/1226125
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, available current is consistently set to zero when a supplier
is disconnected across BC 1.2 drivers, PD task, usb charger task but
voltage is set to zero only in some places.
This patch will set available voltage consistently to 0 on disconnected
ports.
This change should have no impact externally or internally because
currently ports are treated as a disconnected port as long as available
current is zero.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=chromium:841944
BRANCH=none
TEST=Verify ectool usbpdpower 1 return 'Port 1: Disconnected' and
'Port 1: SNK (not charging)' without and with a BJ adapter connected
respectively on Fizz.
Verify ectool usbpdpower prints 'Disconnected' and 'SNK Charger PD'
on Vayne without and with USB-C charger, respectively.
Verify ectool usbpdpower prints 'Disconnected' and 'SNK Charger Type-C'
on Vayne without and with a phone USB-C charger, respectively.
Change-Id: I9aca575a4a4240ec1f669c55437decaedf758a77
Reviewed-on: https://chromium-review.googlesource.com/1222092
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of tying together CONFIG_WP_ALWAYS and RDP protection,
separate the options.
BRANCH=nocturne
BUG=b:111330723
TEST=make buildall -j
Change-Id: I905b573a900ef4dd0431666c525c951582143e09
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1222093
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds support to configure dualrole setting
per port, so that servo v4 can adjust charge and
dut port separately.
servo will detect charge capability on CHG port
and choose source or sink as appropriate.
Fix null dereference bug in genvif duel to dynamic src_pdo.
"cc" command allows src, snk, srcdts, snkdts configurations.
BRANCH=None
BUG=b:72557427
TEST=charge through and also passive hub. Note Dru doesn't accept DTS hub.
TEST=make buildall -j
Change-Id: I19f1d1a5c37647fec72202191faa4821c06fb460
Signed-off-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1096654
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With this patch, we can use them in code.
BUG=none
BRANCH=none
TEST=make buildall -j
Change-Id: Id9646ef82f26bcb6bf55f2ce33a4647b5934c365
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/1116632
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With this patch, EC will reset peripheral, OOB message,
virtual wire, and flash access channels to default settings
while the eSPI_reset# pin is asserted.
BUG=b:80250980
BRANCH=none
TEST=ran console command `hibernate` or 'apshutdown' during system boot
to kernel and then wake system up by power button x 100.
Change-Id: Iceb7ddf1a045937c004f429fc46a7346578b0cce
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/1074672
Tested-by: Stephanie Payton <stephie0128@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Not all boards using ITE83XX use mouse LDN. This change adds a config
option to allow boards to explicity enable this device. Currently,
this device is enabled only for glkrvp_ite and it83xx_evb. It is
disabled for reef_ite and bip.
Change-Id: I7149fd0cb35cc9f49f2b7b80f6c2deefe2edda55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1070785
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Dino Li <dino.li@ite.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Convert all boards that use both CONFIG_ESPI and CONFIG_LPC to only use
the CONFIG_HOSTCMD_ESPI option.
BRANCH=none
BUG=chromium:818804
TEST=entire stack works with lpc and espi
Change-Id: Idd1519494a4f880b7b2018d059579d50c5461fcf
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1067499
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change updates all APL/GLK boards to use
chipset_pre_init_callback instead of hook.
BUG=b:78259506
BRANCH=None
TEST=Verified that yorp still boots.
Change-Id: I71ab0f1111e89a254db83fc58abfdfe8eacd3575
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1018734
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that board version can come from CBI, we can have a real error
reading it. We should pass that error to the console or to the
AP on the host command and let the AP firmware (or user) decided how to
handle that error case
Also update the CONFIG_BOARD_VERSION to be derived instead of needed
in most cases.
BRANCH=none
BUG=b:77972120
TEST=Error reported on EC console and AP console when CBI is
invalid on yorp
Change-Id: Ib8d80f610ea226265a61e68b61965150cdc9bb04
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1015776
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
Initial bring-up code for GLKRVP using ITE8320 MECC.
BUG=b:77798195
BRANCH=none
TEST=Able to boot to OS with host communication disabled
Coreboot image.
Change-Id: Iad0e22c9e7ef1c36889ef5e7f7e3f5a121f234e1
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/1003766
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|