| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As a followup to CL:3104290, give the TCPCI TRANSMIT and
RX_BUF_FRAME_TYPE types more consistent names. Most of them can be used
for receiving, not just transmitting. Fix lint errors thus revealed.
BUG=b:155476419
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: I399ec479eacc18622fc4d3f55f8bdabf4560fcff
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3125995
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This removes the use of adc_chip.h where adc.h is also used. In this
case, adc_chip.h is redundant.
BRANCH=none
BUG=b:181271666
TEST=buildall passes
Change-Id: Id7baf9aef949447a4d47934242f9bae97c971262
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3120317
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rename tcpm_transmit_type to tcpm_sop_type to reflect that it can be
used for Rx as well. Describe it in comments. This prepares to
consolidate enum pd_msg_type into this enum.
BUG=b:155476419
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: Ife97d4ad51c48f2e832b94e007954919e236a309
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3104290
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This removes the CONFIG_SPI_MASTER_PORT config option as no code
actually uses it.
BRANCH=none
BUG=b:181607131
TEST=make buildall passes;
"compare_build.sh -b all" shows no difference
Change-Id: Iddcfa2b36e4100063bb6ad36941f09ac56b0be94
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2932468
Reviewed-by: Harry Cutts <hcutts@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use board-specific override files when generating VIFs for boards.
BUG=b:172276715
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: I197365018ceb8197c22d631cebf4cbce1c0119f7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2785506
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change simply moves the include/version.h file over to avoid
a naming collision with zephyr's version.h.
BRANCH=none
BUG=b:167392037
TEST=make buildall -j
Signed-off-by: Yuval Peress <peress@chromium.org>
Change-Id: Ib41b3c21817d5f81e713d3b550bc46a0d1c55cf8
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2612772
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update the Vendor Information File generator so that it complies
with Revision 1.40, Version 1.0 of the spec.
The VIF files are generated when the board is built.
So, make -j BOARD=<board> will create build/<board>/<board>_vif.txt
A VIF can be generated manually after the board is built with
build/<board>/util/genvif -b <board name> -o <out directory>
BUG=b:131087690
BRANCH=none
TEST=manual
Generate VIF for Atlas and checked fields.
Signed-off-by: Sam Hurst <shurst@chromium.org>
Change-Id: Iaa1eaf1f01f9d36ad3afd2818ebe81359b8531f6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1577739
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Sam Hurst <shurst@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a transmit type parameter to functions involved in mode entry; also
add such a parameter to various functions calling those functions. For
DisplayPort-specific definitions or calls, specify SOP; we do not
currently support DisplayPort mode for cable plugs. For TCPMv1-specific
code, specify SOP. TCPMv1 generally assumes that the discovery/mode
structures are 1-dimensional, as they were previously, and changing that
is outside the scope of this CL.
BUG=b:155890173
TEST=Enter DP mode on Volteer with TCPMv2
TEST=Enter DP mode on Volteer with TCPMv1
TEST=Enter TBT mode on Volteer with TCPMV1
BRANCH=none
Change-Id: I8afc75b3f3be8939c4645058ac4a31f24c88fb9e
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2229279
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current use of the PD Config Flags are a bit confusing and
has been changed to the following:
The CONFIG_USB_POWER_DELIVERY flag is used to enable and disable
the TCPMv1 and TCPMv2 stacks. And when CONFIG_USB_POWER_DELIVERY
is enabled, one of the following must be enabled:
CONFIG_USB_PD_TCPMV1 - legacy power delivery state machine
CONFIG_USB_PD_TCPMV2 - current power delivery state machine
BUG=b:149993808
BRANCH=none
TEST=make -j buildall
Change-Id: Ie3f8615a75b15b4f1c703f57f3db9e152a471238
Signed-off-by: Sam Hurst <shurst@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2068519
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the second half of b/147290482
Cleaning up to use pd_data_role instead of int
BUG=b:147314832
BRANCH=none
TEST=make buildall -j
Change-Id: I2445b06f5f5469fb1f3a968034a83e3ee792e7c7
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1991845
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pd_get_role in the TCPMv1 stack meant pd_get_power_role.
pd_get_role in the TCPMv2 stack meant pd_get_data_role.
This CL will clean that up and make them the correct naming.
pd_get_power_role will also return an enum pd_power_role
type instead of an int.
BUG=b:147290482
BRANCH=none
TEST=make buildall -j
Change-Id: I73ee465401ccd050c2bd151f2fc043a59d95e079
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1991844
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a board specific usb_pd_policy.c file that contains a lot of
code for handling DisplayPort Alternate mode, Google Firmware Update
Alternate mode, as well as some PD policy functions such as deciding to
Accept or Reject a data role swap or a power role swap. Several boards
simply copy/paste this code from project to project as a lot of this
functionality is not actually board specific.
This commit tries to refactor this by pulling the functions that are not
mainly board specific into common code. The functions are made
overridable such that boards that truly do require a different
implementation may do so.
Additionally, this consolidation changes the policy behaviour for some
boards, but they should be for the better. Some examples include that
data swaps are always allowed if we are a UFP (no system image
requirement), power swaps are allowed to become a sink if we are no
longer dual role (e.g. - in suspend), and DisplayPort Alternate Mode is
not entered if the AP is off.
In order to facilitate this refactor, a couple CONFIG_* options were
introduced:
- CONFIG_USB_PD_DP_HPD_GPIO
/* HPD is sent to the GPU from the EC via a GPIO */
- CONFIG_USB_PD_CUSTOM_VDO
/*
* Define this if a board needs custom SNK and/or SRC PDOs.
*
* The default SRC PDO is a fixed 5V/1.5A with PDO_FIXED_FLAGS indicating
* Dual-Role power, USB Communication Capable, and Dual-Role data.
*
* The default SNK PDOs are:
* - Fixed 5V/500mA with the same PDO_FIXED_FLAGS
* - Variable (non-battery) min 4.75V, max PD_MAX_VOLTAGE_MV,
* operational current PD_MAX_CURRENT_MA,
* - Battery min 4.75V, max PD_MAX_VOLTAGE_MV, operational power
* PD_OPERATING_POWER_MW
*/
BUG=chromium:1021724,b:141458448
BRANCH=<as many as we can that are still supported>
TEST=`make -j buildall`
TEST=Flash a kohaku, verify that DP Alt Mode still works with a variety
of DP peripherals
TEST=Repeat above with a nocturne
TEST=Repeat above with an atlas
Change-Id: I18fd7e22dc77fe1dc6c21c38cd7f1bc53cae86cb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1949052
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Certain SKUs of certain boards have lesser number of USB PD ports than
defined by CONFIG_USB_PD_PORT_COUNT. Hence rename
CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNT.
BUG=b:140816510, b:143196487
BRANCH=octopus
TEST=make -j buildall; Boot to ChromeOS
Change-Id: I7c33b27150730a1a3b5813b7b4a72fd24ab73c6a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1879337
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ran the following command:
git grep -l 'Copyright (c)' | \
xargs sed -i 's/Copyright (c)/Copyright/g'
BRANCH=none
BUG=none
TEST=make buildall -j
Change-Id: I6cc4a0f7e8b30d5b5f97d53c031c299f3e164ca7
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1663262
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's simply a bad idea to describe a macro in multiple locations.
It'll make it hard to change. It'll be difficult to keep all
locations in sync.
This patch replaces the comment duplicated in all ec.tasklist with
a pointer to the CONFIG_TASK_LIST definition. The macro will be
described in a single place (just like all/most other macros).
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Id658b9d68e742e4334c692b804d9c98c8de21313
Reviewed-on: https://chromium-review.googlesource.com/1551579
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Requested for linux integration, use BIT instead of 1 <<
First step replace bit operation with operand containing only digits.
Fix an error in motion_lid try to set bit 31 of a signed integer.
BUG=None
BRANCH=None
TEST=compile
Change-Id: Ie843611f2f68e241f0f40d4067f7ade726951d29
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1518659
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of tying together CONFIG_WP_ALWAYS and RDP protection,
separate the options.
BRANCH=nocturne
BUG=b:111330723
TEST=make buildall -j
Change-Id: I905b573a900ef4dd0431666c525c951582143e09
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1222093
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The pd_custom_vdm is called in common/usb_pd_protocol no
matter you have this defined or not. No where else I see
pd_vdm being used. So we should not have to deal with this
CONFIG_USB_PD_CUSTOM_VDM.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: I4e8b710240ee27b12625d797e7824f29044e6462
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/998520
Commit-Ready: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Tested-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We can re-use our pd_log FIFO for other purposes, such as TPM logging.
Carve out event_log, a generic logging module which pd_log is compatible
with.
BUG=b:63760920
TEST=On kevin, verify PD logging is still functional and entries are
seen in dmesg.
BRANCH=None
Change-Id: I8e6ad6f93e9eebc676aca64652c60f81da471a94
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/597314
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Let's split the usb headers in 3 different parts, instead of having
usb_descriptor.h pull in usb_hw.h and usb_api.h.
- usb_api.h: EC functions related to usb (e.g. connect/disconnect)
- usb_descriptor.h: common USB names and structures
- usb_hw.h: Functions required for interactive with EC's USB HW
BRANCH=none
BUG=b:35587171
TEST=make buildall -j
Change-Id: I37ead61e3be5e7ae464f1c9137cf02eaab0ff92e
Reviewed-on: https://chromium-review.googlesource.com/454861
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
usbpd1 futility image type is deprecated and should not be used for
new designs. This adds proper support for rwsig image type.
Key and signatures are added at linker stage step (futility cannot
directly create such signed images). Thanks to VB21 header, rwsig.c
can now tell how many bytes of the RW image need to be
cryptographically verified, and ensure that the rest is blank (0xff).
BRANCH=none
BUG=chromium:690773
TEST=make BOARD=hammer; flash, RW image is verified correctly.
TEST=make runtests -j
TEST=For the rest of the tests:
Change config option to CONFIG_RWSIG_TYPE_RWSIG
TEST=make BOARD=hammer; flash, hammer still verifies correctly.
TEST=cp build/hammer/ec.RW.bin build/hammer/ec.RW.bin.orig;
futility sign --type rwsig --prikey build/hammer/key.vbprik2 \
build/hammer/ec.RW.bin
diff build/hammer/ec.RW.bin build/hammer/ec.RW.bin.orig
=> Same file
TEST=Add CONFIG_CMD_FLASH, flashwrite 0x1e000, reboot, EC does
not verify anymore.
TEST=dump_fmap build/hammer/ec.bin shows KEY_RO and SIG_RW at
correct locations.
Change-Id: I50ec828284c2d1eca67fa8cbddaf6f3b06606c82
Reviewed-on: https://chromium-review.googlesource.com/441546
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Servo_v4 requires the ability to have a different default state per
port. In previous devices, the assumption was that each supported port
had the same default usb pd state and power role. This CL moves the
by the default power role which in turn is derived from
CONFIG_USB_PD_DUAL_ROLE. In addiiton to moving the location, it now
uses 'port' as argument so it can be port specific if required.
PD_DEFAULT_STATE was a board.h specific config, but in practice each
instance used to date was set to PD_STATE_SNK_DISCONNECTED if
CONFIG_USB_PD_DUAL_ROLE was defined and set to
PD_STATE_SRC_DISCONNECTED otherwise.
BUG=chrome-os-partner:61878
BRANCH=servo
TEST=Manual run 'make -j buildall' to verify that all instances of
PD_DEFAULT_STATE were removed.
Change-Id: Iaf40718668732f525485ed7942ee7fc246d3f75d
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431787
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This feature is inconsistent. Not all boards have such a symlink
(for a obvious reason).
This feature is fragile. It's most likely not tested and going to be
broken if not already. Developers won't like it if they have to test
two different ways to build boards before submitting patches.
This feature is not necessary. If you build EC in the standard way
(e.g. make BOARD=samus), these symlinks are not needed.
This feature is wasteful. Extra disk spaces are used and extra lines
are added to Makefile (increasing code complexity slightly).
BUG=chromium:626776
BRANCH=none
TEST=make buildall
Change-Id: Id5444284d773cb0e9225f39abd877441b8f61440
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359321
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously CONFIG_USB_PD_TCPM_VBUS had two uses which were independent:
- When operating as a TCPC, it indicated that the VBUS level should be
tracked (through GPIO inputs) and sent to the external TCPM when
appropriate.
- When operating as a TCPM, it indicated that the VBUS level should be
obtained by querying the TCPC.
These two independent uses have been split into
CONFIG_USB_PD_TCPC_TRACK_VBUS and CONFIG_USB_PD_VBUS_DETECT_TCPC, which
sould be more clear.
In addition, CONFIG_USB_PD_VBUS_DETECT_* CONFIGs have been added for
other means of VBUS detection.
BUG=chromium:616580
BRANCH=None
TEST=Verify kevin continues to boot + charge.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I936821481d6577e17e3e9c61ff97c037574d6923
Reviewed-on: https://chromium-review.googlesource.com/348950
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously calls to hook_call_deferred were passed the function to call,
which was then looked up in the .rodata.deferred section with a linear
search. This linear search can be replaced with a subtract by passing
the pointer to the deferred_data object created when DECLARE_DEFERRED
was invoked.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
CQ-DEPEND=CL:*255812
TEST=make buildall -j
Change-Id: I951dd1541302875b102dd086154cf05591694440
Reviewed-on: https://chromium-review.googlesource.com/334315
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With commit e9883124ff16, a GPIO_INT macro was added. That change
also required that all instances of GPIO_INT in a board's
gpio.inc file come before any GPIO macros, or the interrupt
handler wouldn't work properly.
This CL just adds a warning comment about requirement to all
gpio.inc files.
BUG=chromium:471331
BRANCH=none
TEST=make buildall, test image on Cr50
This is a change to comments only. There is no new behavior to
verify, although I did run try out one new image just to be sure
nothing stupid happened.
Change-Id: I83f7819929a53bce3a8bae04d15b3ee3bda11738
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329334
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Cleanup our port-to-task and task-to-port macros to allow cleanly adding
a third port.
BUG=chromium:554243
BRANCH=None
TEST=Manual on glados / glados_pd. Verify that both USB-C ports are
functional for charging.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ib833de0dfaa9490f4de8efb08d2cdddd86d57896
Reviewed-on: https://chromium-review.googlesource.com/311785
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rename usb.h to usb_descriptor.h to prevent conflict with a
commonly-used libusb header.
BUG=chromium:552006
BRANCH=None
TEST=`make buildall -j`
Change-Id: I6145ce120e1fda41bc5c4d4da0313272e76839c7
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/311429
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove duplicate code for checking request message, but keep
a board specific check of the request message for custom checks
needed on zinger and plankton.
BUG=chrome-os-partner:42490
BRANCH=none
TEST=make -j buildall. run on samus and connect a hoho, make
sure we successfully negotiate a contract.
Change-Id: I7398953a158d340e3e113f5a816b55445a857711
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/305374
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Set USB communications capable flag in source/sink
capabilities PDO on boards that support USB. This
signals to other side that we are capable of
communication over D+/D- or SS Tx/Rx.
BUG=chrome-os-partner:34982
BRANCH=samus,smaug
TEST=load on samus, use twinkie to sniff traffic,
verify that USB comms capable bit is set in source
cap packet
Change-Id: I0f49cf19eb141512298c3439a4708c53101d674f
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300637
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since there is no more concept of a flash region belonging only to the
EC, we only need one FLASH_SIZE config, which represents the actual
physical size of flash.
BRANCH=None
BUG=chrome-os-partner:23796
TEST=With entire patch series, on both Samus and Glados:
- Verify 'version' EC console command is correct
- Verify 'flashrom -p ec -r read.bin' reads back EC image
- Verify software sync correctly flashes both EC and PD RW images
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I18a34a943e02c8a029f330f213a8634a2ca418b6
Reviewed-on: https://chromium-review.googlesource.com/297824
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The in_stream and out_stream interfaces were a first attempt
at providing an abstraction for multiple stream like devices
(usart, USB, I2C/LPC host interfaces...). But, by baking
the queue into the device it proved to be hard to use and
required additional resources (task or deferred hook) to handle
passing data from one stream to another.
Since then the queue policy and producer/consumer interfaces
have replaced the stream interfaces. This CL removes the old
stream interfaces and updates the only users (deleting the
test echo code from the discovery-stm32f072 board and updating
the mcdp28x0 driver to use the queue interfaces).
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: Ic0d2abf81eafc4fb2e61172540151f2d0ba45caf
Reviewed-on: https://chromium-review.googlesource.com/276163
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Firmware's original get_info command always returns the same values
for family, chipid, irom & fw despite indeed having different
versions.
Currently its:
family:000e chipid:0001 irom:1.0.0 fw:0.0.0
As we have a new stepping of the chip ('BB') and a corresponding new
firmware (>=0.74) we need a mechanism to verify and log this change.
CL uses the newly hatched appstest command (0x12) message 0x28 to
surface information that properly reflects both hardware and firmware
running.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35939
TEST=manual,
For devices running 0.54 | 0.74 fw see gpio MCDP_READY asserted.
With CONFIG_CMD_MCDP in board/hoho/board.h see the following responses
when executing 'mcdp info'
Stepping | FW | Response
--------------------------------------------------------------------
'BA' 0.53 fails as expected
'BA' 0.54 family:0010 chipid:2850 irom:2.0.0 fw:0.54.0
'BB' 0.73 fails as expected
'BB' 0.74 family:0010 chipid:2850 irom:2.1.0 fw:0.74.0
Change-Id: I2c36393a298c617f903389dab24da631b60ec574
Reviewed-on: https://chromium-review.googlesource.com/274049
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change refines HPD debounce values into both upstream and downstream
values for packetizing across the type-C link.
For LVL, the upstream type-C device will packetize any HPD transition
>=2ms as either HIGH or LOW. On the downstream side the value is
driven immediately. Additional debouncing should be done by true
upstream device according to specification.
For IRQ, the upstream type-C device will packetize any HPD pulse
>250usec as an IRQ. On the downstream side it will be de-packetized
to create 750usec pulse.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:39717
TEST=samus|macbook(2015) + hoho|dingdong|apple HDMI type-C dongles
still drive screens successfully.
Change-Id: Ide58f3b2d675a82c12ca6afc2be53ca6e2561ace
Reviewed-on: https://chromium-review.googlesource.com/273867
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our existing GPIO macros use port# / gpio#, but the concept of different
GPIO ports does not exist on the mec1322. Therefore, add new GPIO macros
for chips which do not have distinct GPIO ports.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: Ibda97c6563ad447d16dab39ecadab43ccb25174b
Signed-off-by: Steven Jian <steven.jian@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/262841
Reviewed-by: Anton Staaf <robotboy@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move parts of usb_pd_config.h that are not part of the phy layer
out of usb_pd_config.h and into board.h. This cleans up the
division between the TCPC and TCPM as only the TCPC needs to
use usb_pd_config.h.
Also cleans up the use of the CC detection voltage thresholds
by creating standard macros to use based on Rp strength for the
board.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I946cceb38bea8233095b8a4b287102bb8a3a296d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270337
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add config options for various parts of USB PD stack:
CONFIG_USB_POWER_DELIVERY: The use of this option has changed
slightly. It now represents whether or not to include the USB
PD protocol and policy layers of the software stack.
CONFIG_USB_PD_TCPC: Compile in type-C port controller module
which performs the phy layer of the PD stack.
CONFIG_USB_PD_TCPM_STUB and CONFIG_USB_PD_TCPM_TCPCI: If
CONFIG_USB_POWER_DELIVERY is defined, then one TCPM needs to
be defined to declare which port management module to use
to drive the TCPC.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I41aa65a478e36925745cd37a6707f242c0dfbf91
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270171
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the gpio_info struct, we had a irq_handler pointer defined even
though a majority of the GPIOs did not have irq handlers associated. By
removing the irq_handler pointer out of the struct, we can save some
space with some targets saving more than others. (For example, ~260
bytes for samus_pd).
This change also brings about a new define:
GPIO_INT(name, port, pin, flags, signal)
And the existing GPIO macro has had the signal parameter removed since
they were just NULL.
GPIO(name, port, pin, flags)
In each of the gpio.inc files, all the GPIOs with irq handlers must be
defined at the top of the file. This is because their enum values from
gpio_signal are used as the index to the gpio_irq_handlers table.
BUG=chromium:471331
BRANCH=none
TEST=Flashed ec to samus and samus_pd, verified lightbar tap, lid, power
button, keyboard, charging, all still working.
TEST=Moved a GPIO_INT declaration after a GPIO declaration and watched the build
fail.
TEST=make -j BOARD=peppy tests
TEST=make -j BOARD=auron tests
TEST=make -j BOARD=link tests
Change-Id: Id6e261b0a3cd63223ca92f2e96a80c95e85cdefb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263973
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Treat externally powered dualrole devices as dedicated chargers.
This allows us to default to consuming power from externally powered
dualrole devices and cancels a charger override when one is attached.
BUG=chrome-os-partner:38785
BRANCH=samus
TEST=tested with third-party dualrole device that can be externally
powered.
also tested with another samus that was hard-coded with externally
powered bit set, and deleted it's policy for power swapping. when
this externally-powered samus is plugged into a samus running this CL,
we always charge from the externally-powered samus.
Change-Id: I850eba668e86d311d9353aa3881fc3a518409630
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/263331
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refactoring effort to unify the set of PD intialization tasks that
need to occur. Those areas include:
1. host mode as it relates to power & pull-ups/downs
2. PD tx init
3. PD mux settings
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:36481
TEST=manual,
1. compiles and functions on samus_pd
2. If sysjump w/ dongle connected than alternate mode re-entered
properly including muxing and HPD
Change-Id: I47f32acaeccbd7745e1e01a8b085b1804c4c5000
Reviewed-on: https://chromium-review.googlesource.com/249273
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35935
TEST=manual, see new events for dingdong & hoho. Note must be in GFU
mode to facilitate.
Change-Id: I1b79237512748796cf98765a553af8c9978cb594
Reviewed-on: https://chromium-review.googlesource.com/243374
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current simplified implementation allows single mode entry. Specification
allows multiple mode entry and its advantageous for things like flashing RW
while staying in DisplayPort mode on video dongles.
CL adds capability on DFP to track as many alternate modes as supported by the
DFP. Initial mode entered is still the default supported mode ( 1st entry, 1st
opos). Policy manager can then use host command, EC_CMD_USB_PD_SET_AMODE, to
enter additional supported modes.
On the UFP (hoho, dingdong) a small modification to track multiple svid mode
entries was made.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33946
TEST=manual, On hoho
1. Still successfully enter default mode DP
2. Using ectool's pdsetmode can successfully enter/exit multiple modes.
For example,
# port:1 svid:18d1 opos:1 cmd:1==enter
ectool --name cros_pd pdsetmode 1 0x18d1 1 1
Checking with pdgetmode shows both modes entered.
3. Works across hard & soft resets
4. Can flash via ectool --name cros_pd flashpd 4 <port> <RW image>
5. Still drives external display. With bootarg drm.debug=0x6 and following
command: 'tail -f /var/log/messages | grep "Received HPD" &'
I see HPD assert & deassert when switching between GFU and DP mode.
If both modes entered screen stays lit (after reboot) during write.
Change-Id: I7a21ebea377402eb1b0a0cf1d29df59694e301b1
Reviewed-on: https://chromium-review.googlesource.com/241790
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If UFP fails to enter mode after tAMETimeout, UFPs should advertise
there USB Billboard class. If at a later time, DFP does successfully
enter a mode the USB device should disconnect permanently.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33968
TEST=manual,
Change UFPs response to 'discover identity' to be busy until after
tAMETimeout and see hoho enumerate (18d1:5010). Then see it
disconnect after DisplayPort mode is entered.
Change-Id: I2d72ed968302fbf74e70f76891a758c47f3773b4
Reviewed-on: https://chromium-review.googlesource.com/242148
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Separate macros for defining delays to turn on and off VBUS on the
Raiden ports.
Tune the delays for Samus to provide extra headroom based off of
measured worst case times.
BUG=chrome-os-partner:34525
BRANCH=samus
TEST=load onto samus. connect two samus' and use twinkie to analyze
time between request and PS_RDY on connect and then on a power swap.
Change-Id: I65cec911e34c22a4aad136423362a3a65bc2ab2a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241761
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Do not request a voltage that is within the deadband where we
aren't sure if the boost or the boost bypass is on.
BUG=chrome-os-partner:34938
BRANCH=samus
TEST=test on samus with zinger. change the deadband to [10V, 20V]
and see that we only negotiate to 5V. change the deadband to
[13V, 20V] and see that we negotiate to 12V. change the deadband
to [10V, 13V] and see that we negotiate to 20V.
Change-Id: Id761aef35eeadfa2ab7d2ca31a48d4324625ab32
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241528
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a FIFO to log important events on the PD MCU and coming from the PD
accessories.
The retrieval of the accessories log from the accessories by the PD MCU
is not implemented yet.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:32785
TEST=execute "ectool --name=cros_pd pdlog"
before and after plugging Zinger charger.
Change-Id: If96d73e711ff6ad64cfb99bd3e4d2d8f2643f19a
Reviewed-on: https://chromium-review.googlesource.com/238854
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement the new type-C connect state machine which removes
lock and hold times and adds a debounce time to make sure
CC lines settle before going into the attached state.
This also adds detection of accessories, but doesn't do anything
when an accessory is detected.
BUG=chrome-os-partner:33680
BRANCH=samus
TEST=test samus connected zinger and samus connected to samus. make
sure that the connection is always formed. also tested with a third
party with old state machine implementation and formed a connection
every time.
Change-Id: I91a7a6031bc35082cc19d7697142e4aa92ef46f2
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238210
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These USB type-C accessories don't have a write-protect GPIO.
Add a configure flag (CONFIG_WP_ALWAYS) to force the flash
write-protection on the dongles.
Also set the read protection (by elevating RDP to level 1),
so trying to unprotect the flash will trigger a full erase.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35088
TEST=boot Hoho,
check the flash OBR and WRPR registers:
"rw 0x4002201c" / "rw 0x40022020"
and the option bytes write-protect bits: "rw 0x1FFFF808"
dump the logical state with "flashinfo" command.
> rw 0x4002201c
read 0x40022020 = 0xffff0002
> rw 0x40022020
read 0x40022020 = 0xffff0000
> rw 0x1FFFF808
read 0x1ffff808 = 0xff00ff00
> flashinfo
Physical: 128 KB
Usable: 128 KB
Write: 2 B (ideal 2 B)
Erase: 2048 B (to 1-bits)
Protect: 4096 B
Flags: wp_gpio_asserted ro_at_boot ro_now
Protected now:
YYYYYYYY YYYYYYYY ........ ........
Change-Id: I45bbc0bce40ecc174b6b8a1ebacf4f53d2fd372d
Reviewed-on: https://chromium-review.googlesource.com/238893
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
|