summaryrefslogtreecommitdiff
path: root/board/jinlon
Commit message (Collapse)AuthorAgeFilesLines
* adc: Remove adc_chip.h where adc.h is usedCaveh Jalali2021-08-271-1/+0
| | | | | | | | | | | | | | This removes the use of adc_chip.h where adc.h is also used. In this case, adc_chip.h is redundant. BRANCH=none BUG=b:181271666 TEST=buildall passes Change-Id: Id7baf9aef949447a4d47934242f9bae97c971262 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3120317 Reviewed-by: Keith Short <keithshort@chromium.org>
* keyboard_scan: Add consts needed for factory test to headerRob Barnes2021-07-281-5/+0
| | | | | | | | | | | | | | | | | Add keyboard_factory_scan_pins and keyboard_factory_scan_pins_used to keyboard_scan header so they do not need to be declared as extern by individual boards. These constants need to be defined if CONFIG_KEYBOARD_FACTORY_TEST is enabled. BUG=None TEST=Build BRANCH=None Change-Id: I1a100f626b3cea251ca72703d17b2d27db0f8f28 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3053101 Commit-Queue: Diana Z <dzigterman@chromium.org> Reviewed-by: Diana Z <dzigterman@chromium.org>
* cleanup: Fix Dynapack stringDevin Lu2021-07-212-3/+3
| | | | | | | | | | | | | | | The naming string should be DYNAPACK. BUG=none BRANCH=none TEST=make buildall Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Change-Id: I32f2498d4e51a83bd323d313a862622b6e69967d Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3038017 Reviewed-by: Tommy Chung <tommy.chung@quanta.corp-partner.google.com> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* thermisor: move header to include dirDawid Niedzwiecki2021-04-221-1/+1
| | | | | | | | | | | | | | | | Move the "thermistor.h" header to the include/driver/temp_sensor directory. It is used by the Zephyr shim, so the change is useful to include the header. BUG=b:180403276 BRANCH=none TEST=make buildall Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com> Change-Id: I0e83df97e50a3b324440b65ddb900ddf135f2439 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2843323 Reviewed-by: Keith Short <keithshort@chromium.org> Commit-Queue: Keith Short <keithshort@chromium.org>
* genvif: Use VIF overrides by defaultAbe Levkoy2021-03-301-0/+3
| | | | | | | | | | | | | | Use board-specific override files when generating VIFs for boards. BUG=b:172276715 TEST=make buildall BRANCH=none Signed-off-by: Abe Levkoy <alevkoy@chromium.org> Change-Id: I197365018ceb8197c22d631cebf4cbce1c0119f7 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2785506 Reviewed-by: Denis Brockus <dbrockus@chromium.org> Commit-Queue: Denis Brockus <dbrockus@chromium.org>
* Use generic voltage reduce function instead of provided by boardPatryk Duda2021-03-292-24/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch switches implementation of input voltage reduction to generic one. It removes reduce_input_voltage_when_full() function from board code and defines CONFIG_BATT_FULL_CHIPSET_OFF_INPUT_LIMIT_MV with appropriate voltage. Affected boards: - Ampton - Asurada - Cherry - Dratini - Jinlon - Liara - Nocturne BUG=b:182546058 BRANCH=none TEST=Compile firmware for affected boards. TEST=Flash EC ToT on one of affected boards. Charge battery to full. Shutdown board and check if voltage is reduced. Power on board, check if previous voltage is restored. Signed-off-by: Patryk Duda <pdk@semihalf.com> Change-Id: I8f285e75c11f84f4711d5e6a4008174b6fb639cf Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2773219 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* task_set_event: remove the wait argumentDawid Niedzwiecki2020-12-141-2/+2
| | | | | | | | | | | | | | | | | | | | There is an option in the task_set_event function which force the calling task to wait for an event. However, the option is never used thus remove it. This also will help in the Zephyr migration process. BUG=b:172360521 BRANCH=none TEST=make buildall Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com> Change-Id: Ic152fd3d6862d487bcc0024c48d136556c0b81bc Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2521599 Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Tom Hughes <tomhughes@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
* Jinlon: Re-scale power LED pulsing duty cycleDevin Lu2020-07-281-2/+3
| | | | | | | | | | | | | | To save more battery life for S0ix, this patch re-scale power led pulsing cycle with 1.6s off, 0.4s on. BUG=b:161569874 BRANCH=firmware-hatch-12672.B TEST=Make sure power LED pulsing cycle is 1.6s off, 0.4s on. Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Change-Id: Ia791d0a85a51bfe02071d6537b8ded408367c4e9 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2319488 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
| | | | | | | | | | | | | | | | Google is working to change its source code to use more inclusive language. To that end, replace the terms "sane", "sanity check", and similar with inclusive/non-stigmatizing alternatives. BUG=b:161832469 BRANCH=None TEST=`make buildall -j` succeeds. `grep -Eir "sane|sanity" .` shows results only in third-party code or documentation. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I29e78ab27f84f17b1ded75cfa10868fa4e5ae88c Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2311169 Reviewed-by: Jett Rink <jettrink@chromium.org>
* jinlon: Update fan tableDevin Lu2020-06-121-2/+2
| | | | | | | | | | | BUG=b:154564062 BRANCH=firmware-hatch-12672.B TEST=Thermal team verified thermal policy is expected. Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Change-Id: I6d79f2492de087af4f3576dd8faf1079100f3d12 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2241071 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* PD: Remove unnecessary PDCMD taskDiana Z2020-05-201-1/+0
| | | | | | | | | | | | | | | | | | | The PDCMD task is only pulling interrupts from the TCPCs on most boards, which is unnecessary since the PD_INT tasks handle this job now. Remove it from any boards using the PD_INT command which are not using the older CONFIG_HOSTCMD_PD functionality (ex. samus, oak). Located boards using: find -name "ec.tasklist" | xargs grep -l PD_INT | xargs grep PDCMD BRANCH=None BUG=b:154959596 TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: I29be8ab1d7a2616603fb55236aed4329ed8654f5 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2208221 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* hatch: Remove the board keyscan_config definition and use the defaultWai-Hong Tam2020-05-111-1/+0
| | | | | | | | | | | | | | | | | | | The keyscan_config is the same as the default. Don't define the board custom keyscan_config. For the board.h, most of them have duplicated definitions from the baseboard.h. Remove them by the script: $ grep -rl 'BASEBOARD:=hatch' * | cut -f1 -d/ | xargs -IX sed -i \ '/#define CONFIG_KEYBOARD_BOARD_CONFIG/d' X/board.h BRANCH=hatch BUG=b:156007029 TEST=Build all the hatches boards, no error. Change-Id: Ib02550708d533ced77f5fad05b074291b66dd4fc Signed-off-by: Wai-Hong Tam <waihong@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2194160 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* Jinlon: Choose a keyboard layout even for bad SKU IDRajat Jain2020-05-061-2/+3
| | | | | | | | | | | | | | | If SKU ID is not programmed, lets still choose a default keyboard layout so that most of the keys continue to work. BUG=b:146501925 TEST=Build BRANCH=firmware-hatch-12672.B Signed-off-by: Rajat Jain <rajatja@google.com> Change-Id: I1164699f5ef11700130a8f05255030f8417ab718 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2182037 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* HACK: jinlon: Prevent system can't power onDevin Lu2020-04-301-0/+22
| | | | | | | | | | | | | | | | Apply CL:2138734 to jinlon. Currently few systems can't power on, because pp2500_dram_u doesn't assert. To prevent potential risk, this patch trigger re-power on again. BUG=b:152456965 BRANCH=firmware-hatch-12672.B TEST=Verified with defect system and make sure boot up normally. Change-Id: Ic328884cd3cebe42002735b041aa49eb29e60278 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2152036 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* jinlon: Reduce input voltage to 5V when battery fullDevin Lu2020-04-301-1/+28
| | | | | | | | | | | | | | | | | | Apply CL:2104813 for Jinlon. To reduce power consumption, reduce USB-C PD input voltage to 5V when the battery is full and the system is off (S5/G3). BUG=b:149890873 BRANCH=firmware-hatch-12672.B TEST=battery 90%: chgsup shows 15V or 20V, when battery full: chgsup shows 5V, power on AP: chgsup shows 15V or 20V Change-Id: Ia17bdcfc1da6e6909f5da7cdedfa37008440f1d2 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2152035 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* Jinlon: Select CONFIG_KEYBOARD_REFRESH_ROW3Rajat Jain2020-04-301-0/+1
| | | | | | | | | | | | | | | Select this config since refresh key is on Row 3 on Jinlon. BUG=b:146501925 TEST=Build & test Esc+refresh+power on Jinlon BRANCH=firmware-hatch-12672.B Signed-off-by: Rajat Jain <rajatja@google.com> Change-Id: Ifaaefad04780049e7c6cc445682d6ea7949deb81 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2168434 Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* jinlon: Enable multi-profile DPTFDevin Lu2020-04-251-0/+1
| | | | | | | | | | | | | | | This change enables multi profile DPTF for jinlon by selecting CONFIG_DPTF_MULTI_PROFILE and setting appropriate profile numbers based on tablet/clamshell mode BUG=b:154290855 BRANCH=firmware-hatch-12672.B TEST=make BOARD=jinlon Change-Id: I0e21b2172901bb8792a9bbde0d2a0d5fdf9caf7e Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2152034 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* jinlon: set rpm deviation to 1%Devin Lu2020-04-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently rpm deviaction is 7%, it is too large to cause fan rpm between actual and target is not accurately. This patch set lower rpm deviation to 1%. BUG=b:154564062 BRANCH=firmware-hatch-12672.B TEST=run ectool pwmsetfanrpm 4000 to 4500 rpm. make sure fan actual rpm is accurately 2020-03-09 11:09:29 Fan 0 Actual: 4012 rpm 2020-03-09 11:09:29 Fan 0 Target: 4000 rpm 2020-03-09 11:10:08 Fan 0 Actual: 4130 rpm 2020-03-09 11:10:08 Fan 0 Target: 4100 rpm 2020-03-09 11:10:33 Fan 0 Actual: 4219 rpm 2020-03-09 11:10:33 Fan 0 Target: 4200 rpm 2020-03-09 11:11:08 Fan 0 Actual: 4292 rpm 2020-03-09 11:11:08 Fan 0 Target: 4300 rpm 2020-03-09 11:11:30 Fan 0 Actual: 4408 rpm 2020-03-09 11:11:30 Fan 0 Target: 4400 rpm 2020-03-09 11:11:52 Fan 0 Actual: 4488 rpm 2020-03-09 11:11:52 Fan 0 Target: 4500 rpm Change-Id: I992ab7bc4e60ee522466ad32936a82ffd5101361 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2094558 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* jinlon: update thermal table for board version 3Devin Lu2020-04-242-48/+46
| | | | | | | | | | | BUG=b:154564062 BRANCH=firmware-hatch-12672.B TEST=thermal team verified thermal policy is expected. Change-Id: I8455facfe534208ac41bd4a25f803c83e40dad8e Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2157343 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* driver: Replace BMI160 to BMI in board configChing-Kang Yen2020-04-231-6/+6
| | | | | | | | | | | | | | | | | Replace some macro of BMI160 to BMI version for common function of BMI series. Make board config include the accelgyro_bmi_common.h instead of accel_gyro_bmi160.h. BRANCH=None BUG=b:146144827 TEST=make buildall -j Change-Id: I043ff8a92f15295ead3fa5c1e292319e2b4fa21a Signed-off-by: Ching-Kang Yen <chingkang@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2156525 Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
* Jinlon: Initialize keyboardRajat Jain2020-04-231-0/+61
| | | | | | | | | | | | | Initialize the Jinlon keyboard configuration. BUG=b:146501925 TEST=TEst the top row on Jinlon BRANCH=firmware-hatch-12672.B Signed-off-by: Rajat Jain <rajatja@google.com> Change-Id: Ib8ffdbd783126aa097c097dfc968c9d226ac042b Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2135567 Reviewed-by: Jett Rink <jettrink@chromium.org>
* hatch boards: Increase PD tasks stack sizeEdward Hill2020-03-041-2/+2
| | | | | | | | | | | | | | | | CL:2031650 increased stack used by tcpci_tcpm_init(), which caused stack overflow on boards using the ANX7447. BUG=b:149708491, b:150339191 BRANCH=none TEST=fixes EC stack overflow crash on boot, AP boots ok Change-Id: I29c4e2ccce1f3ac1ee125563e4367c4e7d8ea21e Signed-off-by: Edward Hill <ecgh@chromium.org> Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2068800 Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Shelley Chen <shchen@chromium.org>
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes retimers appear as generic muxes. By allowing a chain of muxes they can be stacked up to the new configurations that zork requires and will continue to work as they did before on configurations that only have a single mux. The code used to have two different arrays, 1) muxes and 2) retimers. On one of the zork configurations the processor MUX stopped being the primary mux and the retimer took its place. In a different configuration of that same platform it left the primary and secondary alone but the mux_set FLIP operation had to be ignored. Since the same interfaces needed to be available for both it stopped making sense to have two different structures and two different methods of handling them. This consolodates the two into one. The platforms that do not have retimers, this change will not make any difference. For platforms like zork, it will remove the retimers and make them chained muxes. So testing on trembyle makes sense to verify, BUG=b:147593660 BRANCH=none TEST=verify USB still works on trembyle Change-Id: I286cf1e302f9bd3dd7e81098ec08514a2a009fe3 Signed-off-by: Denis Brockus <dbrockus@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066794 Commit-Queue: Jett Rink <jettrink@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* jinlon: Increase CONFIG_POWER_BUTTON_INIT_TIMEOUTDevin Lu2020-02-211-0/+7
| | | | | | | | | | | | | | | | Apply CL:2065713 to jinlon. BUG=b:148749659 BRANCH=firmware-hatch-12672.B TEST=Enable EC flash protection & software sync. Perform cutoff, wait 30s, insert AC and DUT will boot to OS. Change-Id: I7b931328006d4f91173d4a2dec4f969d71161518 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066429 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
* hatch: Add check for convertible SKUs in lid_angle_peripheral_enableTim Wawrzynczak2020-02-181-0/+8
| | | | | | | | | | | | | | | | Check for a convertible SKU before turning off the keyboard in the switch to tablet mode. See go/hatch-skus for the list. BUG=b:125936966 BRANCH=firmware-hatch-12672.B TEST=On Kohaku, artificially force SKU to both convertible and non-convertible SKUs, switch to tablet mode, and then check whether Alt-Volup-R reboots the EC. Change-Id: Id29644c4e050705203b860324f14b1b87bc4ccf4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2047630 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-8/+4
| | | | | | | | | | | | | | The action_delay_sec field hasn't actually been referenced by any code since 2013. Removing the corresponding struct field. BUG=None BRANCH=None TEST=builds Change-Id: Ia7334c26b85d0161ff61bb51fbdda61bb921595a Signed-off-by: Diana Z <dzigterman@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2054945 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* jinlon: add dual fan control by ecDevin Lu2020-01-313-1/+223
| | | | | | | | | | | | | | | | This patch allows the ec to manage two fans. Currently common/thermal.c cannot monitor more than 1 fan at the same time. This CL implements a board-specific thermal policy with multiple fans. BUG=b:141259174 BRANCH=hatch TEST=thermal team verified thermal policy is expected. Change-Id: I6ababcb0795408e8062b7605bc749e23b8bde45a Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1936077 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* jinlon: enable OTI502 IR temperature sensorDevin Lu2020-01-223-0/+11
| | | | | | | | | | | BUG=b:141259174 BRANCH=hatch TEST=ec console "temps" to check OTI502 IR temperature sensor can be read. Change-Id: I03254e850809d6968b59ca9d0fbcc45443f097af Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1933789 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* jinlon: add battery configurationDevin Lu2019-12-182-39/+9
| | | | | | | | | | | | | Add Dynapack CosMX battery configuration. BUG=b:146413878 BRANCH=hatch TEST=make buildall -j Change-Id: I8614ddc34b37b243386101cc8695a0b0a5b15056 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1971511 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Required by Android CDD - Section 7.3.1 - Paragraph C.1.4 Modified mechanically with: for i in $(grep -lr "\.default_range" board); do sed -i '/.default_range =/s#\(.*\.default_range = \).* /\ \* g.*#\14, /* g, to meet CDD 7.3.1/C-1-4 reqs */#' $i done Manually reworked to only change the accelerometer that matters to android: The lid accelerometer or the base accelerometer if the base also hosts the gyroscope. This is only for future EC, no need to land the change on branches: mems_setup will take care to set accelerometer ranges at 4g on startup. BUG=b:144004449 BRANCH=none TEST=compile Change-Id: If8c14b2e928c9c70c0ce51451adcfcd674a9e73b Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1957375 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Alexandru M Stan <amstan@chromium.org>
* jinlon: assign power enable pin for FAN2 with proto2Devin Lu2019-12-162-1/+2
| | | | | | | | | | | | | | This patch adds power enable pin for FAN2 with porto2 board. BUG=b:145163123 BRANCH=hatch TEST=Use console "faninfo" to make sure FAN2 power on with S0. Use console "faninfo" to make sure FAN2 power off on with S5. Change-Id: Id7ed57b3b4c5fa2a93a6a5019f572edea3a2f0e0 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1966811 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* jinlon: remove identifying SKUs for kbbacklit and convertible.Devin Lu2019-12-162-47/+3
| | | | | | | | | | | | | | Jinlon is all convertible SKUs and has kbbacklit. This patch remove identifying SKUs for kbbacklit and convertible. BUG=b:145688887 BRANCH=hatch TEST=make buildall -j Change-Id: I15a0ba9017a5a924c90625d85f9714afd03ab355 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1966816 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* Revert "hatch: refactor ↵Josh Tsai2019-12-131-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/" This reverts commit 89197aceaf26ccf33b143c7a5e95eb07ba4c7464. Reason for revert: It is not necessary to change the PD setting, so revert it. Original change's description: > hatch: refactor PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/ > > 1) The four config is determined by board, move it into board.h. > 2) Update the config variables above for stryke. > > BUG=b:145257655 > BRANCH=hatch > TEST=make buildall > > Change-Id: I1dd6a4f2a78b5196006821bc5d2686f68206c2e1 > Signed-off-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com> > Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1950270 > Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Bug: b:145257655 Change-Id: Ib2cb2db51b15f0974d2b22ef8e0e3e6d4e6b60d6 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1958299 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com> Commit-Queue: Josh Tsai <josh_tsai@compal.corp-partner.google.com> Tested-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
* jinlon: Make sure EC_RST_ODL is GPIO_LOCKEDDevin Lu2019-12-111-0/+11
| | | | | | | | | | | | | | Clone from CL:1928422 BUG=none BRANCH=hatch TEST=make buildall Change-Id: I488ecaa317b2164d693c9acea2ed010da2e26e2b Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1958386 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* jinlon: Assign SYS_RST_ODL to GPIOC5Devin Lu2019-12-111-1/+1
| | | | | | | | | | | | | Clone from CL:1928421 BUG=none BRANCH=hatch TEST=make sure AP reset pass. Change-Id: I98f8160c9d948a89e8f9a3fd0a3f85b6a7b95b82 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1958385 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* Define board_override_features_flags APIs as overridablednojiri2019-12-102-7/+1
| | | | | | | | | | | | | | | | | | | | | | Currently board_override_features_flags0/1 are enabled by CONFIG_EC_FEATURE_BOARD_OVERRIDE. This patch defines the callbacks as overridable. It will allow us to remove CONFIG_EC_FEATURE_BOARD_OVERRIDE and the redundancy it incurs. Signed-off-by: dnojiri <dnojiri@chromium.org> BUG=none BRANCH=none TEST=buildall Change-Id: I0c2870b746879b272ada35b9615b611627a9f426 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1951810 Reviewed-by: Jett Rink <jettrink@chromium.org> Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Auto-Submit: Daisuke Nojiri <dnojiri@chromium.org>
* jinlon: correct accel orientationDevin Lu2019-12-091-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BUG=none BRANCH=hatch TEST=When device is laying on a table, lid angle at 180, both sensors report gravity along Z axis: localhost ~ # ectool motionsense Motion sensing active Sensor 0: -816 1904 16144 Sensor 1: 115 -136 16228 Sensor 2: 0 0 0 When on the base bottom edge, report gravity along Y axis: localhost ~ # ectool motionsense Motion sensing active Sensor 0: -3344 16160 -1616 Sensor 1: 5 16381 1029 Sensor 2: 0 0 0 When on its left side, report gravity along X axis: localhost ~ # ectool motionsense Motion sensing active Sensor 0: 16416 4272 -1280 Sensor 1: 16403 627 -1691 Sensor 2: 0 0 0 and check the screen rotation was normally. Change-Id: Ie9afa76954c6fd4e5996809255df203688953440 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1955104 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* hatch: refactor PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/Josh Tsai2019-12-061-0/+6
| | | | | | | | | | | | | | 1) The four config is determined by board, move it into board.h. 2) Update the config variables above for stryke. BUG=b:145257655 BRANCH=hatch TEST=make buildall Change-Id: I1dd6a4f2a78b5196006821bc5d2686f68206c2e1 Signed-off-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1950270 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* jinlon: add FAN2 supportDevin Lu2019-11-243-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | BUG=b:141259174 BRANCH=hatch TEST=faninfo can see the 2nd fan works with console. 2019-11-22 14:23:55 Fan 0 Actual: 3309 rpm 2019-11-22 14:23:55 Fan 0 Target: 3291 rpm 2019-11-22 14:23:55 Fan 0 Duty: 42% 2019-11-22 14:23:55 Fan 0 Status: 2 (locked) 2019-11-22 14:23:55 Fan 0 Mode: rpm 2019-11-22 14:23:55 Fan 0 Auto: yes 2019-11-22 14:23:55 Fan 0 Enable: yes 2019-11-22 14:23:55 Fan 0 Power: yes 2019-11-22 14:23:55 2019-11-22 14:23:55 Fan 1 Actual: 3101 rpm 2019-11-22 14:23:55 Fan 1 Target: 3291 rpm 2019-11-22 14:23:55 Fan 1 Duty: 37% 2019-11-22 14:23:55 Fan 1 Status: 2 (locked) 2019-11-22 14:23:55 Fan 1 Mode: rpm 2019-11-22 14:23:55 Fan 1 Auto: yes 2019-11-22 14:23:55 Fan 1 Enable: yes Change-Id: I88aa8efcbb55d8a64ae51c68b5a142e5a4997f46 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1928542 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
* Dratini/Jinlon: Add support for TEMP_SENSOR3Devin Lu2019-11-223-5/+14
| | | | | | | | | | | | | | A new temperature sensor is added to Dratini/Jinlon boards, close to the CPU. It is used to support the fan control. BUG=none BRANCH=hatch TEST=temp command in EC console Change-Id: Icd5974133da5e1aec81f2201f87e1b83b79c6169 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1925802 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* jinlon: change TCPC port 0 from ANX7447 to PS8751Devin Lu2019-11-223-9/+8
| | | | | | | | | | | | | | | | | This patch chagnes TCPC port 0 from ANX7447 to PS8751, It includes the gpio name, function name and reset signal. BUG=none BRANCH=hatch TEST=make sure tcpc port 0 is workable. Change-Id: I698d70750727080f46cffdc136ffd8a54967ca89 Signed-off-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1918984 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Scott Collyer <scollyer@chromium.org> Commit-Queue: Paul Fagerburg <pfagerburg@chromium.org>
* jinlon: Initial EC imageDevin Lu2019-11-127-0/+1116
The starting point for the jinlon EC image (Auto-Generated by create_initial_ec_image.sh version 1.0.0). BUG=b:144150654 BRANCH=none TEST=make BOARD=jinlon Change-Id: Ifb50f2f8ed16dc0f808bfb065a9ecae47c64956d Signed-off-by: Devin Lu <devin.lu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1907669 Tested-by: Devin Lu <Devin.Lu@quantatw.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Commit-Queue: Devin Lu <Devin.Lu@quantatw.com>
View Lorry Controller Status