| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This removes the use of adc_chip.h where adc.h is also used. In this
case, adc_chip.h is redundant.
BRANCH=none
BUG=b:181271666
TEST=buildall passes
Change-Id: Id7baf9aef949447a4d47934242f9bae97c971262
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3120317
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add keyboard_factory_scan_pins and keyboard_factory_scan_pins_used to
keyboard_scan header so they do not need to be declared as extern by
individual boards. These constants need to be defined if
CONFIG_KEYBOARD_FACTORY_TEST is enabled.
BUG=None
TEST=Build
BRANCH=None
Change-Id: I1a100f626b3cea251ca72703d17b2d27db0f8f28
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3053101
Commit-Queue: Diana Z <dzigterman@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The naming string should be DYNAPACK.
BUG=none
BRANCH=none
TEST=make buildall
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Change-Id: I32f2498d4e51a83bd323d313a862622b6e69967d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3038017
Reviewed-by: Tommy Chung <tommy.chung@quanta.corp-partner.google.com>
Reviewed-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the "thermistor.h" header to the include/driver/temp_sensor
directory. It is used by the Zephyr shim, so the change is useful to
include the header.
BUG=b:180403276
BRANCH=none
TEST=make buildall
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Change-Id: I0e83df97e50a3b324440b65ddb900ddf135f2439
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2843323
Reviewed-by: Keith Short <keithshort@chromium.org>
Commit-Queue: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use board-specific override files when generating VIFs for boards.
BUG=b:172276715
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: I197365018ceb8197c22d631cebf4cbce1c0119f7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2785506
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch switches implementation of input voltage reduction to generic
one. It removes reduce_input_voltage_when_full() function from board
code and defines CONFIG_BATT_FULL_CHIPSET_OFF_INPUT_LIMIT_MV
with appropriate voltage.
Affected boards:
- Ampton
- Asurada
- Cherry
- Dratini
- Jinlon
- Liara
- Nocturne
BUG=b:182546058
BRANCH=none
TEST=Compile firmware for affected boards.
TEST=Flash EC ToT on one of affected boards. Charge battery to full.
Shutdown board and check if voltage is reduced. Power on board,
check if previous voltage is restored.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Change-Id: I8f285e75c11f84f4711d5e6a4008174b6fb639cf
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2773219
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is an option in the task_set_event function which force
the calling task to wait for an event. However, the option is never
used thus remove it.
This also will help in the Zephyr migration process.
BUG=b:172360521
BRANCH=none
TEST=make buildall
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Change-Id: Ic152fd3d6862d487bcc0024c48d136556c0b81bc
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2521599
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To save more battery life for S0ix, this patch re-scale power led pulsing
cycle with 1.6s off, 0.4s on.
BUG=b:161569874
BRANCH=firmware-hatch-12672.B
TEST=Make sure power LED pulsing cycle is 1.6s off, 0.4s on.
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Change-Id: Ia791d0a85a51bfe02071d6537b8ded408367c4e9
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2319488
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Google is working to change its source code to use more inclusive
language. To that end, replace the terms "sane", "sanity check", and
similar with inclusive/non-stigmatizing alternatives.
BUG=b:161832469
BRANCH=None
TEST=`make buildall -j` succeeds. `grep -Eir "sane|sanity" .` shows
results only in third-party code or documentation.
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: I29e78ab27f84f17b1ded75cfa10868fa4e5ae88c
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2311169
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:154564062
BRANCH=firmware-hatch-12672.B
TEST=Thermal team verified thermal policy is expected.
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Change-Id: I6d79f2492de087af4f3576dd8faf1079100f3d12
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2241071
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The PDCMD task is only pulling interrupts from the TCPCs on most boards,
which is unnecessary since the PD_INT tasks handle this job now.
Remove it from any boards using the PD_INT command which are not using
the older CONFIG_HOSTCMD_PD functionality (ex. samus, oak).
Located boards using:
find -name "ec.tasklist" | xargs grep -l PD_INT | xargs grep PDCMD
BRANCH=None
BUG=b:154959596
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I29be8ab1d7a2616603fb55236aed4329ed8654f5
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2208221
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The keyscan_config is the same as the default. Don't define the board
custom keyscan_config.
For the board.h, most of them have duplicated definitions from the
baseboard.h. Remove them by the script:
$ grep -rl 'BASEBOARD:=hatch' * | cut -f1 -d/ | xargs -IX sed -i \
'/#define CONFIG_KEYBOARD_BOARD_CONFIG/d' X/board.h
BRANCH=hatch
BUG=b:156007029
TEST=Build all the hatches boards, no error.
Change-Id: Ib02550708d533ced77f5fad05b074291b66dd4fc
Signed-off-by: Wai-Hong Tam <waihong@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2194160
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If SKU ID is not programmed, lets still choose a default keyboard layout
so that most of the keys continue to work.
BUG=b:146501925
TEST=Build
BRANCH=firmware-hatch-12672.B
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I1164699f5ef11700130a8f05255030f8417ab718
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2182037
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Apply CL:2138734 to jinlon.
Currently few systems can't power on, because pp2500_dram_u doesn't assert.
To prevent potential risk, this patch trigger re-power on again.
BUG=b:152456965
BRANCH=firmware-hatch-12672.B
TEST=Verified with defect system and make sure boot up normally.
Change-Id: Ic328884cd3cebe42002735b041aa49eb29e60278
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2152036
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Apply CL:2104813 for Jinlon.
To reduce power consumption, reduce USB-C PD input voltage to 5V
when the battery is full and the system is off (S5/G3).
BUG=b:149890873
BRANCH=firmware-hatch-12672.B
TEST=battery 90%: chgsup shows 15V or 20V,
when battery full: chgsup shows 5V,
power on AP: chgsup shows 15V or 20V
Change-Id: Ia17bdcfc1da6e6909f5da7cdedfa37008440f1d2
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2152035
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Select this config since refresh key is on Row 3 on Jinlon.
BUG=b:146501925
TEST=Build & test Esc+refresh+power on Jinlon
BRANCH=firmware-hatch-12672.B
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: Ifaaefad04780049e7c6cc445682d6ea7949deb81
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2168434
Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change enables multi profile DPTF for jinlon by selecting
CONFIG_DPTF_MULTI_PROFILE and setting appropriate profile numbers
based on tablet/clamshell mode
BUG=b:154290855
BRANCH=firmware-hatch-12672.B
TEST=make BOARD=jinlon
Change-Id: I0e21b2172901bb8792a9bbde0d2a0d5fdf9caf7e
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2152034
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently rpm deviaction is 7%, it is too large to cause fan rpm between
actual and target is not accurately. This patch set lower rpm deviation
to 1%.
BUG=b:154564062
BRANCH=firmware-hatch-12672.B
TEST=run ectool pwmsetfanrpm 4000 to 4500 rpm.
make sure fan actual rpm is accurately
2020-03-09 11:09:29 Fan 0 Actual: 4012 rpm
2020-03-09 11:09:29 Fan 0 Target: 4000 rpm
2020-03-09 11:10:08 Fan 0 Actual: 4130 rpm
2020-03-09 11:10:08 Fan 0 Target: 4100 rpm
2020-03-09 11:10:33 Fan 0 Actual: 4219 rpm
2020-03-09 11:10:33 Fan 0 Target: 4200 rpm
2020-03-09 11:11:08 Fan 0 Actual: 4292 rpm
2020-03-09 11:11:08 Fan 0 Target: 4300 rpm
2020-03-09 11:11:30 Fan 0 Actual: 4408 rpm
2020-03-09 11:11:30 Fan 0 Target: 4400 rpm
2020-03-09 11:11:52 Fan 0 Actual: 4488 rpm
2020-03-09 11:11:52 Fan 0 Target: 4500 rpm
Change-Id: I992ab7bc4e60ee522466ad32936a82ffd5101361
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2094558
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:154564062
BRANCH=firmware-hatch-12672.B
TEST=thermal team verified thermal policy is expected.
Change-Id: I8455facfe534208ac41bd4a25f803c83e40dad8e
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2157343
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace some macro of BMI160 to BMI version for common function of
BMI series.
Make board config include the accelgyro_bmi_common.h instead of
accel_gyro_bmi160.h.
BRANCH=None
BUG=b:146144827
TEST=make buildall -j
Change-Id: I043ff8a92f15295ead3fa5c1e292319e2b4fa21a
Signed-off-by: Ching-Kang Yen <chingkang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2156525
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Initialize the Jinlon keyboard configuration.
BUG=b:146501925
TEST=TEst the top row on Jinlon
BRANCH=firmware-hatch-12672.B
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: Ib8ffdbd783126aa097c097dfc968c9d226ac042b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2135567
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CL:2031650 increased stack used by tcpci_tcpm_init(), which caused
stack overflow on boards using the ANX7447.
BUG=b:149708491, b:150339191
BRANCH=none
TEST=fixes EC stack overflow crash on boot, AP boots ok
Change-Id: I29c4e2ccce1f3ac1ee125563e4367c4e7d8ea21e
Signed-off-by: Edward Hill <ecgh@chromium.org>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2068800
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Shelley Chen <shchen@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes retimers appear as generic muxes. By allowing a
chain of muxes they can be stacked up to the new configurations
that zork requires and will continue to work as they did before
on configurations that only have a single mux.
The code used to have two different arrays, 1) muxes and 2)
retimers. On one of the zork configurations the processor
MUX stopped being the primary mux and the retimer took its
place. In a different configuration of that same platform
it left the primary and secondary alone but the mux_set
FLIP operation had to be ignored. Since the same
interfaces needed to be available for both it stopped making
sense to have two different structures and two different
methods of handling them. This consolodates the two into
one.
The platforms that do not have retimers, this change will
not make any difference. For platforms like zork, it will
remove the retimers and make them chained muxes. So
testing on trembyle makes sense to verify,
BUG=b:147593660
BRANCH=none
TEST=verify USB still works on trembyle
Change-Id: I286cf1e302f9bd3dd7e81098ec08514a2a009fe3
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066794
Commit-Queue: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Apply CL:2065713 to jinlon.
BUG=b:148749659
BRANCH=firmware-hatch-12672.B
TEST=Enable EC flash protection & software sync.
Perform cutoff, wait 30s, insert AC and DUT will boot to OS.
Change-Id: I7b931328006d4f91173d4a2dec4f969d71161518
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066429
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Check for a convertible SKU before turning off the keyboard in the
switch to tablet mode. See go/hatch-skus for the list.
BUG=b:125936966
BRANCH=firmware-hatch-12672.B
TEST=On Kohaku, artificially force SKU to both convertible and
non-convertible SKUs, switch to tablet mode, and then check whether
Alt-Volup-R reboots the EC.
Change-Id: Id29644c4e050705203b860324f14b1b87bc4ccf4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2047630
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The action_delay_sec field hasn't actually been referenced by
any code since 2013. Removing the corresponding struct field.
BUG=None
BRANCH=None
TEST=builds
Change-Id: Ia7334c26b85d0161ff61bb51fbdda61bb921595a
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2054945
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch allows the ec to manage two fans. Currently common/thermal.c
cannot monitor more than 1 fan at the same time. This CL implements a
board-specific thermal policy with multiple fans.
BUG=b:141259174
BRANCH=hatch
TEST=thermal team verified thermal policy is expected.
Change-Id: I6ababcb0795408e8062b7605bc749e23b8bde45a
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1936077
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:141259174
BRANCH=hatch
TEST=ec console "temps" to check OTI502 IR temperature sensor can be read.
Change-Id: I03254e850809d6968b59ca9d0fbcc45443f097af
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1933789
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add Dynapack CosMX battery configuration.
BUG=b:146413878
BRANCH=hatch
TEST=make buildall -j
Change-Id: I8614ddc34b37b243386101cc8695a0b0a5b15056
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1971511
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Required by Android CDD - Section 7.3.1 - Paragraph C.1.4
Modified mechanically with:
for i in $(grep -lr "\.default_range" board); do
sed -i '/.default_range =/s#\(.*\.default_range = \).* /\
\* g.*#\14, /* g, to meet CDD 7.3.1/C-1-4 reqs */#' $i
done
Manually reworked to only change the accelerometer that matters to
android:
The lid accelerometer or the base accelerometer if the base also hosts
the gyroscope.
This is only for future EC, no need to land the change on branches:
mems_setup will take care to set accelerometer ranges at 4g on startup.
BUG=b:144004449
BRANCH=none
TEST=compile
Change-Id: If8c14b2e928c9c70c0ce51451adcfcd674a9e73b
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1957375
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Alexandru M Stan <amstan@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds power enable pin for FAN2 with porto2 board.
BUG=b:145163123
BRANCH=hatch
TEST=Use console "faninfo" to make sure FAN2 power on with S0.
Use console "faninfo" to make sure FAN2 power off on with S5.
Change-Id: Id7ed57b3b4c5fa2a93a6a5019f572edea3a2f0e0
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1966811
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Jinlon is all convertible SKUs and has kbbacklit. This patch
remove identifying SKUs for kbbacklit and convertible.
BUG=b:145688887
BRANCH=hatch
TEST=make buildall -j
Change-Id: I15a0ba9017a5a924c90625d85f9714afd03ab355
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1966816
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/"
This reverts commit 89197aceaf26ccf33b143c7a5e95eb07ba4c7464.
Reason for revert: It is not necessary to change the PD setting, so revert it.
Original change's description:
> hatch: refactor PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/
>
> 1) The four config is determined by board, move it into board.h.
> 2) Update the config variables above for stryke.
>
> BUG=b:145257655
> BRANCH=hatch
> TEST=make buildall
>
> Change-Id: I1dd6a4f2a78b5196006821bc5d2686f68206c2e1
> Signed-off-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1950270
> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Bug: b:145257655
Change-Id: Ib2cb2db51b15f0974d2b22ef8e0e3e6d4e6b60d6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1958299
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
Commit-Queue: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
Tested-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Clone from CL:1928422
BUG=none
BRANCH=hatch
TEST=make buildall
Change-Id: I488ecaa317b2164d693c9acea2ed010da2e26e2b
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1958386
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Clone from CL:1928421
BUG=none
BRANCH=hatch
TEST=make sure AP reset pass.
Change-Id: I98f8160c9d948a89e8f9a3fd0a3f85b6a7b95b82
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1958385
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently board_override_features_flags0/1 are enabled by
CONFIG_EC_FEATURE_BOARD_OVERRIDE.
This patch defines the callbacks as overridable. It will
allow us to remove CONFIG_EC_FEATURE_BOARD_OVERRIDE and
the redundancy it incurs.
Signed-off-by: dnojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: I0c2870b746879b272ada35b9615b611627a9f426
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1951810
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Auto-Submit: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
BRANCH=hatch
TEST=When device is laying on a table, lid angle at 180, both sensors
report gravity along Z axis:
localhost ~ # ectool motionsense
Motion sensing active
Sensor 0: -816 1904 16144
Sensor 1: 115 -136 16228
Sensor 2: 0 0 0
When on the base bottom edge, report gravity along Y axis:
localhost ~ # ectool motionsense
Motion sensing active
Sensor 0: -3344 16160 -1616
Sensor 1: 5 16381 1029
Sensor 2: 0 0 0
When on its left side, report gravity along X axis:
localhost ~ # ectool motionsense
Motion sensing active
Sensor 0: 16416 4272 -1280
Sensor 1: 16403 627 -1691
Sensor 2: 0 0 0
and check the screen rotation was normally.
Change-Id: Ie9afa76954c6fd4e5996809255df203688953440
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1955104
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1) The four config is determined by board, move it into board.h.
2) Update the config variables above for stryke.
BUG=b:145257655
BRANCH=hatch
TEST=make buildall
Change-Id: I1dd6a4f2a78b5196006821bc5d2686f68206c2e1
Signed-off-by: Josh Tsai <josh_tsai@compal.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1950270
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:141259174
BRANCH=hatch
TEST=faninfo can see the 2nd fan works with console.
2019-11-22 14:23:55 Fan 0 Actual: 3309 rpm
2019-11-22 14:23:55 Fan 0 Target: 3291 rpm
2019-11-22 14:23:55 Fan 0 Duty: 42%
2019-11-22 14:23:55 Fan 0 Status: 2 (locked)
2019-11-22 14:23:55 Fan 0 Mode: rpm
2019-11-22 14:23:55 Fan 0 Auto: yes
2019-11-22 14:23:55 Fan 0 Enable: yes
2019-11-22 14:23:55 Fan 0 Power: yes
2019-11-22 14:23:55
2019-11-22 14:23:55 Fan 1 Actual: 3101 rpm
2019-11-22 14:23:55 Fan 1 Target: 3291 rpm
2019-11-22 14:23:55 Fan 1 Duty: 37%
2019-11-22 14:23:55 Fan 1 Status: 2 (locked)
2019-11-22 14:23:55 Fan 1 Mode: rpm
2019-11-22 14:23:55 Fan 1 Auto: yes
2019-11-22 14:23:55 Fan 1 Enable: yes
Change-Id: I88aa8efcbb55d8a64ae51c68b5a142e5a4997f46
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1928542
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A new temperature sensor is added to Dratini/Jinlon boards, close to the
CPU. It is used to support the fan control.
BUG=none
BRANCH=hatch
TEST=temp command in EC console
Change-Id: Icd5974133da5e1aec81f2201f87e1b83b79c6169
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1925802
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch chagnes TCPC port 0 from ANX7447 to PS8751, It includes the gpio
name, function name and reset signal.
BUG=none
BRANCH=hatch
TEST=make sure tcpc port 0 is workable.
Change-Id: I698d70750727080f46cffdc136ffd8a54967ca89
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1918984
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Commit-Queue: Paul Fagerburg <pfagerburg@chromium.org>
|
|
The starting point for the jinlon EC image
(Auto-Generated by create_initial_ec_image.sh version 1.0.0).
BUG=b:144150654
BRANCH=none
TEST=make BOARD=jinlon
Change-Id: Ifb50f2f8ed16dc0f808bfb065a9ecae47c64956d
Signed-off-by: Devin Lu <devin.lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1907669
Tested-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Commit-Queue: Devin Lu <Devin.Lu@quantatw.com>
|