| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Each board defines its own callback lid_angle_peripheral_enable().
The implementation is very similar. Create a common implementation
and reduce the duplicated code.
This CL removes the board callbacks which are identifical to the
common callback. If it is slightly different, keep it and add
the __override tag.
The check of TEST_BUILD is unnecessary as the board callback is not
linked in the test build.
BRANCH=None
BUG=b:194922043
TEST=Build all the images.
Change-Id: I73d381730f35b80eff69399cdfc5fb54f839aee0
Signed-off-by: Wai-Hong Tam <waihong@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3069175
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a reland of f7fbc629f0655229cc7ffdadfb18c9e13118e3d2
Original change's description:
> dedede/raa489000: Disable ASGATE from READY state
>
> On the boards which use the RAA489000, we keep the ADC enabled while
> giving VBUS control to the charger side. This can cause a situation
> where VBUS is not quite zero volts when a charger is removed. This
> commit uses the charger side registers to control the ASGATE when
> selecting our active charge port. This is done in addition to the
> existing implementation which uses the TCPCI registers to control
> ASGATE. When we place the parts into low power mode, we move the VBUS
> control from the TCPC side of the IC to the charger side. It should
> be safe to issue both commands as if the TCPC side has control, the IC
> ignores the setting from the charger side registers.
>
> BUG=b:183220414
> BRANCH=dedede
> TEST=Build and flash madoo, plug in charger to port, unplug, verify
> that VBUS falls to < 200mV and decays from there.
>
> Signed-off-by: Aseda Aboagye <aaboagye@google.com>
> Change-Id: I8e8c8cc32575d18c9d3d1210ed3c5cf69ad5ca4b
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2793058
> Tested-by: Aseda Aboagye <aaboagye@chromium.org>
> Reviewed-by: Diana Z <dzigterman@chromium.org>
> Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Bug: b:183220414
Change-Id: I36db53f3e13ba848308cd7e0c94a1b5a3551c600
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2797549
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit f7fbc629f0655229cc7ffdadfb18c9e13118e3d2.
Reason for revert: Breaks sourcing of VBUS.
Original change's description:
> dedede/raa489000: Disable ASGATE from READY state
>
> On the boards which use the RAA489000, we keep the ADC enabled while
> giving VBUS control to the charger side. This can cause a situation
> where VBUS is not quite zero volts when a charger is removed. This
> commit uses the charger side registers to control the ASGATE when
> selecting our active charge port. This is done in addition to the
> existing implementation which uses the TCPCI registers to control
> ASGATE. When we place the parts into low power mode, we move the VBUS
> control from the TCPC side of the IC to the charger side. It should
> be safe to issue both commands as if the TCPC side has control, the IC
> ignores the setting from the charger side registers.
>
> BUG=b:183220414
> BRANCH=dedede
> TEST=Build and flash madoo, plug in charger to port, unplug, verify
> that VBUS falls to < 200mV and decays from there.
>
> Signed-off-by: Aseda Aboagye <aaboagye@google.com>
> Change-Id: I8e8c8cc32575d18c9d3d1210ed3c5cf69ad5ca4b
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2793058
> Tested-by: Aseda Aboagye <aaboagye@chromium.org>
> Reviewed-by: Diana Z <dzigterman@chromium.org>
> Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Bug: b:183220414
Change-Id: Ibf6c161adca9981a065e969b6c3b73dd408ef1ba
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2796411
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On the boards which use the RAA489000, we keep the ADC enabled while
giving VBUS control to the charger side. This can cause a situation
where VBUS is not quite zero volts when a charger is removed. This
commit uses the charger side registers to control the ASGATE when
selecting our active charge port. This is done in addition to the
existing implementation which uses the TCPCI registers to control
ASGATE. When we place the parts into low power mode, we move the VBUS
control from the TCPC side of the IC to the charger side. It should
be safe to issue both commands as if the TCPC side has control, the IC
ignores the setting from the charger side registers.
BUG=b:183220414
BRANCH=dedede
TEST=Build and flash madoo, plug in charger to port, unplug, verify
that VBUS falls to < 200mV and decays from there.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I8e8c8cc32575d18c9d3d1210ed3c5cf69ad5ca4b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2793058
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit updates the OCPC constants for madoo such that it meets
the criteria at go/ocpc-testing.
- Converges around the target current.
- Average steady state error is less than 4% of target.
- Current is reduced to target level in less than 5s when load is
suddenly released.
BUG=b:176197658
BRANCH=dedede
TEST=Build and flash madoo. Verify that battery can charge to 100%.
Verify that it meets or exceeds the constraints above.
TEST=Verify that DUT can come out of battery cutoff from sub board.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I257d144598c14414b3c760196af0095ba8a071c1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2686255
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Boards using the RAA489000 TCPC should set output current on their ports
through the TCPC driver. This commit adds a board function to do this
for every dedede board currently using the RAA489000.
BRANCH=None
BUG=b:178064507
TEST=on madoo, verify OCP occurs if more than 1.5A is drawn on a non-PD
port, verify register is set to allow 3.0A for port partners requesting
that current in their sink capabilities
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ieb7df916c122d5de1adaa7371a58ad5cf2954ee4
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2658377
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In madoo's design, there is a protection IC between USB
connector and TCPC. When EC is hibernate, the CC lines will
be disconnected, which cause the result that TCPC can't
detect AC power and Chromebook won't wake the system.
Enalbing ADC for all modes by setting 0x4C bit 0 to 1 (to be
more precise is that we don't clear bit 0 during hibernation)
can prevent issue mention above.
BUG=b:174971576
BRANCH=dedede
TEST=flash code and make sure ac in can wake system from hibernation
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: I2a83c69e34cbc4bfdff90d760f32817a7924dc26
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2626803
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Reviewed-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
Tested-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove reconfigure_5v_gpio in madoo to avoid unnecessary issue
BUG=None
BRANCH=dedede
TEST=flash on DVT and make sure DUT can be powered up
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: Ib53fcf6b262ccb79d9fa60645620ecea8b9a9cdf
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2620731
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Ko Ko <ko_ko@compal.corp-partner.google.com>
Tested-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is an option in the task_set_event function which force
the calling task to wait for an event. However, the option is never
used thus remove it.
This also will help in the Zephyr migration process.
BUG=b:172360521
BRANCH=none
TEST=make buildall
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Change-Id: Ic152fd3d6862d487bcc0024c48d136556c0b81bc
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2521599
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When interrupts are interleaved from the TCPC and charger, we can get
into a state where the interrupt line for the board ends up stuck low.
Improve on this situation by setting a deferred function to check on the
interrupt line after we get a signal in, and notify chips on that line
there may be more to process.
BRANCH=None
BUG=b:173345295
TEST=on madoo, plug in powered PD hub to C1, generating interrupts
from both the charger and TCPC and verify C1 interrupt line goes high
once connection is ready
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: I3d29df28f94cb6c352adf05b9204ab4ff52a9726
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2557758
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Ko Ko <ko_ko@compal.corp-partner.google.com>
Tested-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The RAA48900 charger IC seems to over draw its contract by roughly 4%.
This commit simply modifies our input current limit to account for
that.
BUG=b:147463641
BRANCH=dedede
TEST=Build and flash waddledoo, verify that input current limit is
reduced and is under the contract.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I70ab15ea24d789a7a1696217efae784f537ca014
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2548692
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PP5000_U shouldn't be turned off until G3, so if a sysjump occurs during
S5 leave this rail on.
BRANCH=None
BUG=b:166787955,b:167996216
TEST=on drawcia, run full resets with a forced sysjump in S5 and ensure
that the DUT can get to S0 after the reset
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I00fb44903aa109bbc525fb512ab4035a94649c68
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2458841
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change adds the temperature sensors for madoo, which are hooked
up to 2 of the ADCs.
BUG=b:169729477
BRANCH=None
TEST=build and test on madoo board. Can obtain value via ectool cmd.
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: Id57a669006db04f9a83ad3b6ebe65b2df7c80b11
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2437723
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Ko Ko <ko_ko@compal.corp-partner.google.com>
Tested-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Modify usb_mux structure, and set up by different board_id.
BUG=b:162802526
BRANCH=none
TEST=modify board_version
and unit can project to external monitor via main board type-c.
Signed-off-by: elmo_lan <elmo_lan@compal.corp-partner.google.com>
Change-Id: I13b3ef4d808edf4aa667d36053897dd1369daa81
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2431320
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds the needed rotation matrices for base sensor to place
the measurements into the standard reference frame.
BUG=b:167940144
BRANCH=none
TEST=Build and flash madoo. Compare accel readings against
released chromebooks and verify that they match in orientation and
sign.
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: Ieaee61a4e9e3c5c551b250045d30c6572bb18e65
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2419740
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
Commit-Queue: Ko Ko <ko_ko@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove VSYNC sensor, and related GPIOs and configs.
BRANCH=None
BUG=b:169056723
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ib37e648ea04b5da3ed9ce6a660fcd60f2bfe264a
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2424891
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch swaps the forwardslash-pipe key (scancode=0x56) with the
right control key (scancode=0xe014) if UK2 bit in fw_config is define.
BUG=b:162016093
BRANCH=none
TEST=make BOARD=madoo
Signed-off-by: Leo-Tsai <leocx_tsai@compal.corp-partner.google.com>
Change-Id: I07be81b3ac3cafab46ac07a67f018e87166e375a
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2315970
Reviewed-by: Elmo Lan <elmo_lan@compal.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds the needed rotation matrices for the sensors to place
the measurements into the standard reference frame.
BUG=b:167940144
BRANCH=none
TEST=Build and flash madoo. Compare accel readings against
released chromebooks and verify that they match in orientation and
sign.
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: I2579f3e1eeb301815e8759621dea228fa888b361
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2409719
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Ko Ko <ko_ko@compal.corp-partner.google.com>
Tested-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Madoo doesn't support HDMI sub-board. By removing it to prevent unwanted
outcome.
BRANCH=None
BUG=b:167168822
TEST=on function works on madoo proto build with type C sub board.
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: I8b3e95c520c71b0e0541d5786c296375e7556cb2
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2385022
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: Justin TerAvest <teravest@chromium.org>
Commit-Queue: Ko Ko <ko_ko@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On madoo, we have a LED indicator with following:
Power LED:
System S0: White.
System S0ix: Blinking white (1 sec on, 1 sec off)
System S5/G3: Off.
Battery LED:
DC mode:
System S0: off.
System S5/G3: Off.
System battery low: Blinking white (1 sec on, 1 sec off)
AC mode:
Charging: Amber.
Full charged: White.
only AC without battery: Blinking Amber (0.5 sec on, 0.5 sec off).
BUG=b:163935841
BRANCH=none
TEST=test on waddledoo reference board ,battery 、 Power LEDs are work.
Signed-off-by: Leo-Tsai <leocx_tsai@compal.corp-partner.google.com>
Change-Id: I633582dfbcf2a0050d3c30f9a70ff838f2cfcdc7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2352958
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the PWM related defines and arrays into the board level, to allow
customization of what PWM channels boards use (if they choose to use the
PWM at all).
BRANCH=None
BUG=None
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Id417a7be079511c17de9f2e5d03c729467435804
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2358899
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change Gyro & Accel Sensor from BMI160 to LSM6DSL.
BUG=b:163437341
BRANCH=none
TEST=none
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: I676878b8e11ef2c8ff8b502066f2c355d720f7b1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2348736
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Justin TerAvest <teravest@chromium.org>
Tested-by: Justin TerAvest <teravest@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add redriver to USB port0 which is in mainboard side.
BUG=b:162802526
BRANCH=none
TEST=none
Signed-off-by: elmo_lan <elmo_lan@compal.corp-partner.google.com>
Change-Id: I8d0c4f788d89b3649891745def1371dce40dcfd2
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2340731
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Commit-Queue: Justin TerAvest <teravest@chromium.org>
Tested-by: Justin TerAvest <teravest@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Project Madoo has CCSBU OVP hardware design.
Include GPIO and function into board layer.
BUG=b:162470629
BRANCH=none
TEST=none
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: I36469c8d5b6b6ff39ba230d98263c622e5861a57
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2328945
Reviewed-by: Diana Z <dzigterman@chromium.org>
Tested-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
Commit-Queue: Ko Ko <ko_ko@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This consolidates dedede boards to use a baseboard extpower_is_present()
and also adds the condition to verify that the port is sinking, instead
of providing Vbus. It also converts the RAA489000 boards to use the
cached Vbus presence in pd_snk_is_vbus_provided().
BRANCH=None
BUG=None
TEST=on waddledoo and waddledee, verify "AC on" prints when a charger or
charge-through servo v4 is plugged in, verify no "AC on" prints when a
dongle is plugged in
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I5941da789a4e810f6d8cc40cef4d32a5a03c5662
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2317062
Tested-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
Create the initial EC image for the madoo variant by copying the
waddledoo reference board EC files into a new directory named for
the variant.
(Auto-Generated by create_initial_ec_image.sh version 1.0.3).
BUG=None
BRANCH=none
TEST=make BOARD=madoo
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: If6bcd7af69f354973994e2e024c8c8b17d37433e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2301561
Reviewed-by: Diana Z <dzigterman@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Commit-Queue: Henry Sun <henrysun@google.com>
Tested-by: Henry Sun <henrysun@google.com>
|