summaryrefslogtreecommitdiff
path: root/board/mushu
Commit message (Collapse)AuthorAgeFilesLines
* adc: Remove adc_chip.h where adc.h is usedCaveh Jalali2021-08-271-1/+0
| | | | | | | | | | | | | | This removes the use of adc_chip.h where adc.h is also used. In this case, adc_chip.h is redundant. BRANCH=none BUG=b:181271666 TEST=buildall passes Change-Id: Id7baf9aef949447a4d47934242f9bae97c971262 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3120317 Reviewed-by: Keith Short <keithshort@chromium.org>
* Mushu: Free up flash spaceDiana Z2021-07-251-1/+4
| | | | | | | | | | | | | | Mushu is down to 700 bytes of free flash on ToT, so remove some commands in order to bring it up to almost 2k free. BRANCH=None BUG=None TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: I17c9863208a1b26568a07f772c9431f6eaf633ad Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3048516 Reviewed-by: Wai-Hong Tam <waihong@google.com>
* mushu: Remove PRL stringsWai-Hong Tam2021-07-231-0/+3
| | | | | | | | | | | | | | | Mushu is nearly out of flash on ToT, 40 bytes, so remove the PRL strings from the build. Set the default debug level to 2, so RX messages will show up in logs automatically if they are needed. BRANCH=None BUG=None TEST=Build on ToT, observe mushu has over ~700 bytes free flash. Change-Id: I79b428ea24c443f428d888f4ad890483e5a9f9fd Signed-off-by: Wai-Hong Tam <waihong@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3048524 Reviewed-by: Diana Z <dzigterman@chromium.org>
* DP Altmode DFP: Add `mfallow` commandudaykiran2021-07-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | The USB Type-C Altmode allows for protocols other than USB to be transferred over a USB connection. Chromebooks use this functionality to transfer DisplayPort on USB signals. This is achieved through USB-PD handshake through SVDMs to discover, configure, and to enter or exit Alt modes. When DisplayPort as an Alt Mode is enabled, allowable functionalities are: -- SS and high speed USB functionality and two-lane DP. -- HS USB functionality and 4-lane DP. Chromebooks honor Multifunction bit set in the DPStatus message sent by a dock. However, for development purposes we would like to have control to honor the MF bit or ignore it, there by achieving 2-lane DP vs 4-lane DP functionality. 4-lane DP functionality is required to test higher resolution monitors such as 4k60. BUG=b:181365633 BRANCH=none TEST=make BOARD, tested on G5 dock with kindred. Signed-off-by: udaykiran <udaykiran@google.com> Change-Id: Icc25f339a78d1423b094d2acf9d586721ec2df46 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2939383 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* LED On/Off: Make battery LED optionalDiana Z2021-04-221-4/+5
| | | | | | | | | | | | | | | Currently, all boards using the LED On/Off module have battery LEDs. However, if we'd like to expand support to Chromeboxes then the battery LED must become optional. BRANCH=None BUG=b:185508707 TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: Ieae098829ebe6c8b103f23d5abdbf70e7bcbdf2d Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2832692 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* thermisor: move header to include dirDawid Niedzwiecki2021-04-221-1/+1
| | | | | | | | | | | | | | | | Move the "thermistor.h" header to the include/driver/temp_sensor directory. It is used by the Zephyr shim, so the change is useful to include the header. BUG=b:180403276 BRANCH=none TEST=make buildall Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com> Change-Id: I0e83df97e50a3b324440b65ddb900ddf135f2439 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2843323 Reviewed-by: Keith Short <keithshort@chromium.org> Commit-Queue: Keith Short <keithshort@chromium.org>
* genvif: Use VIF overrides by defaultAbe Levkoy2021-03-301-0/+3
| | | | | | | | | | | | | | Use board-specific override files when generating VIFs for boards. BUG=b:172276715 TEST=make buildall BRANCH=none Signed-off-by: Abe Levkoy <alevkoy@chromium.org> Change-Id: I197365018ceb8197c22d631cebf4cbce1c0119f7 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2785506 Reviewed-by: Denis Brockus <dbrockus@chromium.org> Commit-Queue: Denis Brockus <dbrockus@chromium.org>
* board: Set Accelerometer range to 4gGwendal Grignou2021-02-131-1/+1
| | | | | | | | | | | | | | | | | For accelerometer presented to Android, set default range to 4g. Required by Android CDD - Section 7.3.1 - Paragraph C.1.4. mems_setup can correct it, but it is cleaner if the default setting is right. BUG=b:144004449 BRANCH=none TEST=compile Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: I781eafc003823e2595d46d7170f717aaee08dc6d Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2657956 Reviewed-by: Alexandru M Stan <amstan@chromium.org>
* TCPMv2: Update source-out configsDiana Z2020-12-241-0/+1
| | | | | | | | | | | | | | | | | | | | Now that the DPM will be handling source-out decisions for TCPMv2, remove references to its old configuration options from TCPMv2 boards in order to avoid any confusion as to what code is running now. Also remove the charge manager notifications of sink attach/detach since the policy is being centralized into the DPM. Note that the previous configuration options only ever allocated one 3.0 A port, and so the default number of 3.0 A ports has been set to 1. BRANCH=None BUG=b:168862110,b:141690755 TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: Ie452e3da32b04226503539daa67b6b9f4a58aa58 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2597431 Reviewed-by: Keith Short <keithshort@chromium.org>
* task_set_event: remove the wait argumentDawid Niedzwiecki2020-12-141-2/+2
| | | | | | | | | | | | | | | | | | | | There is an option in the task_set_event function which force the calling task to wait for an event. However, the option is never used thus remove it. This also will help in the Zephyr migration process. BUG=b:172360521 BRANCH=none TEST=make buildall Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com> Change-Id: Ic152fd3d6862d487bcc0024c48d136556c0b81bc Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2521599 Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Tom Hughes <tomhughes@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
| | | | | | | | | | | | | | | | Google is working to change its source code to use more inclusive language. To that end, replace the terms "sane", "sanity check", and similar with inclusive/non-stigmatizing alternatives. BUG=b:161832469 BRANCH=None TEST=`make buildall -j` succeeds. `grep -Eir "sane|sanity" .` shows results only in third-party code or documentation. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I29e78ab27f84f17b1ded75cfa10868fa4e5ae88c Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2311169 Reviewed-by: Jett Rink <jettrink@chromium.org>
* Swap system_jumped_to_this_image with system_jumped_latestabilize-quickfix-13310.91.B-masterstabilize-quickfix-13310.76.B-masterstabilize-quickfix-13310.73.B-masterstabilize-13310.99.B-masterstabilize-13310.94.B-masterstabilize-13310.83.B-masterstabilize-13310.74.B-masterstabilize-13310.72.B-masterrelease-R85-13310.B-masterDaisuke Nojiri2020-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | EFS2 boards need to call system_jumped_late in HOOK_INIT to avoid running init code twice per boot. system_jumped_to_this_image and system_jumped_late are functionally equivalent for non EFS2 boards. This patch will prevent system_jumped_to_this_image from being used for EFS2 boards when code is copied from a past project. BUG=chromium:1072743 BRANCH=none TEST=buildall Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I73fb5cedc5325d1c80825f9346954013046ee1df Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2267685 Reviewed-by: Keith Short <keithshort@chromium.org>
* mushu: Bring up F75303 temp sensorPuthikorn Voravootivat2020-06-162-14/+49
| | | | | | | | | | | | | | | | | | | | BRANCH=None BUG=b:158676970 TEST=Force fan off/run heavy workload Use temps command in ec console, see temp > temps CHARGER : 318 K = 45 C 64% 5V : 316 K = 43 C 61% GPU : 343 K = 70 C 100% F75303_Local : 331 K = 58 C F75303_GPU : 340 K = 67 C F75303_GPU_Power : 332 K = 59 C Change-Id: I0af47849cc606eb03eee652bb261fce11896e2ab Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2240512 Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Shelley Chen <shchen@chromium.org>
* TCPMv2: Only include PD3.0 functionality when CONFIG_USB_PD_REV30Sam Hurst2020-05-211-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The TCPMv2 stack defaults to PD2.0 functionality. Defining CONFIG_USB_PD_REV30 enables PD3.0 functionality. BUG=b:155879504 BRANCH=none TEST=make -j buildall Manual tests: passed FAFT_PD running on kohaku Before patch: *** 18624 bytes in flash and 29216 bytes in RAM on kohaku RO **** *** 18544 bytes in flash and 29216 bytes in RAM on kohaku RW **** After patch: *** 23320 bytes in flash and 30336 bytes in RAM on kohaku RO **** *** 23228 bytes in flash and 30336 bytes in RAM on kohaku RW **** Flash savings of 4696 bytest Ram savings of 1120 Signed-off-by: Sam Hurst <shurst@google.com> Change-Id: I082cf62617a91b487d2d3567afd5e340bd52258c Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2184547 Reviewed-by: Jett Rink <jettrink@chromium.org>
* Mushu : correct the GPU power leakage.loganliao2020-05-201-2/+0
| | | | | | | | | | | | | | | | | | | GPIO60 and GPIOC2 are reserved for GPU overheat function but not used currently. It causes the GPU leakage because these two pins keep high when AP off. GPIO60 and GPIOC2 config nothing at present before we know what to do. BUG=b:156962942 BRANCH=none TEST=HW measure no leakage when MUSHU Board AP off. Change-Id: If3d31c519d678b5dff321cfcdbd2a4a750836a35 Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2206519 Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Bob Moragues <moragues@chromium.org>
* Mushu : Hibernate fail correct.loganliao2020-05-201-3/+2
| | | | | | | | | | | | | | | | | The GPIO02 config the PSL_IN first, it cause hibernate fail. According to the Mushu circuit, It is unneeded to config PSL_IN on GPIO02. BUG=b:156986654 BRANCH=none TEST=console type hibernate and hibernate success after ap power off. Change-Id: If1d1b32f9104647174f2f56c5d3a56c7e43e2b78 Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2206943 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Bob Moragues <moragues@chromium.org>
* PD: Remove unnecessary PDCMD taskDiana Z2020-05-201-1/+0
| | | | | | | | | | | | | | | | | | | The PDCMD task is only pulling interrupts from the TCPCs on most boards, which is unnecessary since the PD_INT tasks handle this job now. Remove it from any boards using the PD_INT command which are not using the older CONFIG_HOSTCMD_PD functionality (ex. samus, oak). Located boards using: find -name "ec.tasklist" | xargs grep -l PD_INT | xargs grep PDCMD BRANCH=None BUG=b:154959596 TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: I29be8ab1d7a2616603fb55236aed4329ed8654f5 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2208221 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* Mushu : Fan1 rpm config.loganliao2020-05-181-5/+5
| | | | | | | | | | | | | | | | | | Follow the thermal team test, modify parameter that max/min Fan1 rpm and start/end temperature for Fan1. BUG=b:152011093 BRANCH=none TEST=make BOARD=mushu. Thermal team test result. Change-Id: If6f923fb35badbddf902ac32b41b6f25a1acda31 Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2203572 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Bob Moragues <moragues@chromium.org>
* hatch: Remove the board keyscan_config definition and use the defaultWai-Hong Tam2020-05-111-1/+0
| | | | | | | | | | | | | | | | | | | The keyscan_config is the same as the default. Don't define the board custom keyscan_config. For the board.h, most of them have duplicated definitions from the baseboard.h. Remove them by the script: $ grep -rl 'BASEBOARD:=hatch' * | cut -f1 -d/ | xargs -IX sed -i \ '/#define CONFIG_KEYBOARD_BOARD_CONFIG/d' X/board.h BRANCH=hatch BUG=b:156007029 TEST=Build all the hatches boards, no error. Change-Id: Ib02550708d533ced77f5fad05b074291b66dd4fc Signed-off-by: Wai-Hong Tam <waihong@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2194160 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* Mushu : correct battery parameter config.loganliao2020-05-082-20/+19
| | | | | | | | | | | | | | | | This patch modify the battery parameter to meet the battery function. BUG=b:154198760 BRANCH=none TEST=ship mode function works fine. Change-Id: Ibb4aa278c80e4bf61756f0af3cf1ca985d6dd88e Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2154312 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Bob Moragues <moragues@chromium.org>
* Mushu: Enable TCPMv2Shelley Chen2020-05-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Transitioning Mushu to TCPMv2. Mushu needs some features that are only going to be available on the new stack. We need to still use PD 2.0 because we have a parade TCPC however, which is not compatible with the PD 3.0 spec. BUG=b:155118660 BRANCH=None TEST=flash onto mushu board Plug in charger. See the following output, which verified that we are using the new stack: 2020-05-05 14:59:06 [269.461931 C1: Attached.SNK] 2020-05-05 14:59:06 [269.471130 C1: PE_SNK_Startup] 2020-05-05 14:59:06 [269.473331 VBUS p1 1] 2020-05-05 14:59:06 [269.474353 C1: PE_SNK_Discovery] 2020-05-05 14:59:06 [269.476796 New charge port: C1] 2020-05-05 14:59:06 [269.482324 C1: PE_SNK_Wait_for_Capabilities] 2020-05-05 14:59:06 bq25710: no battery, skip ICO enable 2020-05-05 14:59:06 [269.486195 CL: p1 s1 i3000 v5000] 2020-05-05 14:59:06 [269.556396 AC on] 2020-05-05 14:59:06 [269.577137 C1: PE_SNK_Evaluate_Capability] 2020-05-05 14:59:06 [269.577801 C1: PE_SNK_Select_Capability] 2020-05-05 14:59:06 C1 Req [4] 15000mV 3000mA Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I796c8de9a7f7f4d9f5c139fbe0fd09cd64f933dc Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2182043 Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Commit-Queue: Shelley Chen <shchen@chromium.org> Tested-by: Shelley Chen <shchen@chromium.org>
* driver: Replace BMI160 to BMI in board configChing-Kang Yen2020-04-231-6/+6
| | | | | | | | | | | | | | | | | Replace some macro of BMI160 to BMI version for common function of BMI series. Make board config include the accelgyro_bmi_common.h instead of accel_gyro_bmi160.h. BRANCH=None BUG=b:146144827 TEST=make buildall -j Change-Id: I043ff8a92f15295ead3fa5c1e292319e2b4fa21a Signed-off-by: Ching-Kang Yen <chingkang@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2156525 Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
* Mushu : Modify GPU fan rpm.loganliao2020-04-211-5/+5
| | | | | | | | | | | | | | | | The parameter of GPU fan follows the data that thermal team provide. BUG=none BRANCH=none TEST=make BOARD=mushu Change-Id: I4dd815344352113432a8cbd481c13771f4634a1e Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2156696 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Scott Collyer <scollyer@chromium.org> Commit-Queue: Logan Liao <logan_liao@compal.corp-partner.google.com> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com>
* Mushu : fan rpm_min change to const variable.loganliao2020-04-101-1/+2
| | | | | | | | | | | | | | | BUG=none BRANCH=none TEST=make BOARD=mushu Change-Id: Ic3bf1ecce3b779c93fd6731904706c0e464d76c1 Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2142837 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Commit-Queue: Logan Liao <logan_liao@compal.corp-partner.google.com> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com>
* Mushu : Base G-sensor configloganliao2020-03-271-2/+2
| | | | | | | | | | | | | | | | | | G-sensor config is refer to Hatch. However G-sensor location is different from Hatch. This patch correct the right value in Mushu. BUG=b:152583296 BRANCH=none TEST=test in the pre-build Mushu Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Change-Id: Ie36b004837aba9b5e3529ae383f8f3292887c3ee Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2124427 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bob Moragues <moragues@chromium.org> Commit-Queue: Bob Moragues <moragues@chromium.org> Tested-by: Bob Moragues <moragues@chromium.org>
* Mushu : add dual fan control by ECloganliao2020-03-233-1/+65
| | | | | | | | | | | | | | | | | | Currently cannot monitor more than one fan at the same time. This patch distinguish between temperature which read from GPU and read from Charger. Allow EC control two fans individually. BUG=b:148968367 BRANCH=none TEST=make BOARD=mushu Change-Id: I7841fb1cd9f214effa1372e24a9b943b4608a2bb Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2082305 Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Tested-by: Bob Moragues <moragues@chromium.org>
* Mushu : enable GPU temperature sensor driver in Mushuloganliao2020-03-133-8/+20
| | | | | | | | | | | | | | BUG=b:148968367 BRANCH=none TEST=make BOARD=mushu Change-Id: I20e1ebd8714e3d4b3b990d6e2a38f415afd8b5c5 Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2082303 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Commit-Queue: Logan Liao <logan_liao@compal.corp-partner.google.com> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com>
* Mushu : add I2C_PORT_GPU configloganliao2020-03-111-0/+3
| | | | | | | | | | | | | | | BUG=b:148968367 BRANCH=none TEST=make BOARD=mushu Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Change-Id: Ib07d46432cf06df6f8816528600650a06f71333d Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2094845 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Scott Collyer <scollyer@chromium.org> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Logan Liao <logan_liao@compal.corp-partner.google.com>
* Mushu : assign EN_PP5000_A_V0 to GPIO02loganliao2020-03-051-1/+1
| | | | | | | | | | | | | | | | | | EN_PP5000_A_V0 change to GPIO02 which is ground and meets the Mushu circuit . BUG=none BRANCH=none TEST=make BOARD=mushu Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Change-Id: Ie861a7ac1000ac2f09d41313a08c4158c943a897 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2072561 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Shelley Chen <shchen@chromium.org> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
* hatch boards: Increase PD tasks stack sizeEdward Hill2020-03-041-2/+2
| | | | | | | | | | | | | | | | CL:2031650 increased stack used by tcpci_tcpm_init(), which caused stack overflow on boards using the ANX7447. BUG=b:149708491, b:150339191 BRANCH=none TEST=fixes EC stack overflow crash on boot, AP boots ok Change-Id: I29c4e2ccce1f3ac1ee125563e4367c4e7d8ea21e Signed-off-by: Edward Hill <ecgh@chromium.org> Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2068800 Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Shelley Chen <shchen@chromium.org>
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes retimers appear as generic muxes. By allowing a chain of muxes they can be stacked up to the new configurations that zork requires and will continue to work as they did before on configurations that only have a single mux. The code used to have two different arrays, 1) muxes and 2) retimers. On one of the zork configurations the processor MUX stopped being the primary mux and the retimer took its place. In a different configuration of that same platform it left the primary and secondary alone but the mux_set FLIP operation had to be ignored. Since the same interfaces needed to be available for both it stopped making sense to have two different structures and two different methods of handling them. This consolodates the two into one. The platforms that do not have retimers, this change will not make any difference. For platforms like zork, it will remove the retimers and make them chained muxes. So testing on trembyle makes sense to verify, BUG=b:147593660 BRANCH=none TEST=verify USB still works on trembyle Change-Id: I286cf1e302f9bd3dd7e81098ec08514a2a009fe3 Signed-off-by: Denis Brockus <dbrockus@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066794 Commit-Queue: Jett Rink <jettrink@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* Mushu : PD_Max change to 20V/5Aloganliao2020-02-271-2/+6
| | | | | | | | | | | | | | | BUG=b:145841965 BRANCH=none TEST=make BOARD=mushu Change-Id: I7c48d8b57e45f0e1193f3757845d5877d86a0b4b Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2051798 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Scott Collyer <scollyer@chromium.org> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Logan Liao <logan_liao@compal.corp-partner.google.com>
* mushu: add FAN2 supportloganliao2020-02-193-2/+38
| | | | | | | | | | | | | | BRANCH=none BUG=b:148968367 TEST=make BOARD=mushu Change-Id: If367d96dfa992109097e3aa7e843861a6a287082 Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2040753 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Logan Liao <logan_liao@compal.corp-partner.google.com>
* hatch: Add check for convertible SKUs in lid_angle_peripheral_enableTim Wawrzynczak2020-02-181-0/+7
| | | | | | | | | | | | | | | | Check for a convertible SKU before turning off the keyboard in the switch to tablet mode. See go/hatch-skus for the list. BUG=b:125936966 BRANCH=firmware-hatch-12672.B TEST=On Kohaku, artificially force SKU to both convertible and non-convertible SKUs, switch to tablet mode, and then check whether Alt-Volup-R reboots the EC. Change-Id: Id29644c4e050705203b860324f14b1b87bc4ccf4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2047630 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* Mushu : Assign SYS_RESET_ODL to GPIOC5loganliao2020-02-151-2/+1
| | | | | | | | | | | | | | | | clone from CL:1928421, circuit is changed in Mushu. BUG=none BRANCH=none TEST=none(no Mushu BOARD) Change-Id: I3449fc4cedfb50e75aefbe7c9b64103c264be08e Signed-off-by: loganliao <Logan_Liao@compal.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2056584 Reviewed-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Tested-by: Logan Liao <logan_liao@compal.corp-partner.google.com> Commit-Queue: Logan Liao <logan_liao@compal.corp-partner.google.com>
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-4/+2
| | | | | | | | | | | | | | The action_delay_sec field hasn't actually been referenced by any code since 2013. Removing the corresponding struct field. BUG=None BRANCH=None TEST=builds Change-Id: Ia7334c26b85d0161ff61bb51fbdda61bb921595a Signed-off-by: Diana Z <dzigterman@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2054945 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* mushu: Create initial buildBob Moragues2019-12-217-0/+1026
Create initial overlays and build for mushu BUG=b:144857888 TEST=./build_packages --board mushu TEST=./build_image --board mushu --noenable_rootfs_verification test BRANCH=none Signed-off-by: Bob Moragues <moragues@chromium.org> Change-Id: I7ad99b12d3c05445c777f01577fa68c8ab1193db Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1931420 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
View Lorry Controller Status