summaryrefslogtreecommitdiff
path: root/board/nautilus
Commit message (Expand)AuthorAgeFilesLines
* common: bit change 1 << constants with BIT(constants)Gwendal Grignou2019-03-262-2/+2
* common: replace 1 << digits, with BIT(digits)Gwendal Grignou2019-03-261-2/+2
* motion: Define macros for custom eventsGwendal Grignou2019-03-201-1/+2
* nautilus,reef_mchp: Remove board_is_ramp_allowedDaisuke Nojiri2018-12-141-15/+0
* motion_lid: Use CONFIG_TABLET_MODEFurquan Shaikh2018-11-291-2/+0
* nautilus: Enable multi-profile DPTFFurquan Shaikh2018-11-151-0/+2
* dptf: Get rid of CONFIG_DPTF_DEVICE_ORIENTATIONFurquan Shaikh2018-10-301-1/+0
* ss-mux: remove unused port_addr initializationv2.0.0Jett Rink2018-09-171-2/+0
* type: Rename matrix_3x3_t to mat33_fp_tYilun Lin2018-09-131-2/+2
* nautilus: decrease UART bufferJett Rink2018-08-301-1/+1
* servo_v4: add per port dualrole settingNick Sanders2018-08-151-2/+2
* espi: Rename CONFIG_HOSTCMD_ESPI_VW_SIGNALS to CONFIG_HOSTCMD_ESPI_VW_SLP_SIG...Furquan Shaikh2018-07-273-3/+3
* nautilus: Remove the unused GPIO USB_POWERON_LPhilip Chen2018-07-172-6/+1
* espi: rename remaining eSPI optionsJett Rink2018-05-233-3/+3
* espi: convert all eSPI board to use CONFIG_HOSTCMD_ESPIJett Rink2018-05-221-2/+1
* nautilus: Move PMIC init to a deferred functionFurquan Shaikh2018-05-011-1/+4
* nautilus: Enable usb device modeFurquan Shaikh2018-05-011-1/+8
* system: update board version to return an error if encounteredJett Rink2018-04-191-2/+1
* nautilus: Shrink accelerometer FIFO to 512 entriesNicolas Boichat2018-04-101-1/+4
* cleanup: CONFIG_USB_PD_CUSTOM_VDM is not usedDivya Sasidharan2018-04-091-1/+0
* nautilus: Support tristate board id strapping pinPhilip Chen2018-04-092-0/+29
* nautilus: Lower VCCIO from 0.975V to 0.850VFurquan Shaikh2018-04-041-4/+4
* usbc: add default I2C addressesJett Rink2018-03-281-2/+12
* nautilus: enable accel force mode mask on nautilusJongpil Jung2018-03-261-0/+3
* Remove the unnecessary words of "Disable touchpad" in the commentsKaiyen Chang2018-03-261-1/+2
* Add config for boards that cannot distinguish reset typeDuncan Laurie2018-03-261-0/+1
* nautilus: Use I2C callbacks to ensure minimum bus free time for batteryFurquan Shaikh2018-03-212-0/+36
* nautilus: Increase task stack sizes, add stack analysis annotationsNicolas Boichat2018-03-192-14/+225
* nautilus : system enter hibernation on reliability testYB.Ha2018-03-191-1/+1
* driver: bma2x2: Add perform_calibGwendal Grignou2018-03-161-1/+1
* board: In motion sensor array, remove assignment to 0Gwendal Grignou2018-03-141-45/+0
* nautilus: Customize charging algorithmPhilip Chen2018-03-121-16/+63
* npcx: remove optional CONFIG_PECI since no one is using it with npcxJett Rink2018-03-071-1/+0
* npcx: Conforming CONFIG_UART_HOST define to match intentionJett Rink2018-03-061-1/+0
* nautilus: Disable sensor in S5Furquan Shaikh2018-02-232-4/+5
* nautilus : clean up gpiosYB.Ha2018-02-012-7/+4
* cleanup: Removing unnecessary CONFIG_USB_PD_DISCHARGE defineJett Rink2018-02-011-1/+0
* nautilus: Implement workaround for broken reset flags for rev3.Jongpil Jung2018-01-311-2/+2
* nautilus : fix white led shown issue on ec resetYB.Ha2018-01-301-3/+3
* nautilus : fix abnormal led operationYB.Ha2018-01-291-2/+5
* nautilus: Fix battery_check_disconnect()Philip Chen2018-01-251-17/+17
* nautilus: set default level for USB_POWERONJongpil Jung2018-01-232-5/+11
* nautilus: Remove WLAN_PE_RSTPhilip Chen2018-01-231-1/+0
* poppy/nautilus: Enable ACCELGYRO3_INT_L BMI160 interruptsNicolas Boichat2018-01-211-0/+3
* nautilus: support BC1.2 on USB Type-A portYB.Ha2018-01-153-2/+21
* nautilus: bug fix in sensor index.Jongpil Jung2018-01-102-123/+123
* nautilus: Implement workaround for broken reset flagsFurquan Shaikh2018-01-101-0/+12
* driver/charger/isl923x: Make sure CONFIG_CHARGER_NARROW_VDC is setNicolas Boichat2018-01-101-1/+0
* nautilus: update sensor rotation matrix.Jongpil Jung2018-01-101-6/+6
* nautilus/poppy: Drop comment about thermistorNicolas Boichat2017-12-241-1/+0
View Lorry Controller Status