summaryrefslogtreecommitdiff
path: root/board/nocturne
Commit message (Expand)AuthorAgeFilesLines
* genvif: Use VIF overrides by defaultAbe Levkoy2021-03-301-0/+3
* Use generic voltage reduce function instead of provided by boardPatryk Duda2021-03-292-26/+1
* config: Provide default VCONN Swap delayAbe Levkoy2021-01-221-1/+0
* config: Make VCONN Swap delay a documented optionAbe Levkoy2021-01-221-1/+1
* Refactor CONFIG_FLASH_SIZE to CONFIG_FLASH_SIZE_BYTESYuval Peress2021-01-151-1/+1
* Move tcpic.h header into include/driverSimon Glass2021-01-071-1/+1
* TCPMv2: Update source-out configsDiana Z2020-12-241-0/+1
* PD: Fix passing information about polarity when DTS is connectedPatryk Duda2020-11-231-1/+2
* COIL: Rename CONFIG_I2C_CONTROLLERDiana Z2020-11-051-1/+1
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
* Charger: Add dynamic charger chip countDiana Z2020-07-111-2/+0
* nocturne: enable CONFIG_CMD_CHARGENNamyoon Woo2020-06-101-0/+1
* TCPMv2: Only include PD3.0 functionality when CONFIG_USB_PD_REV30Sam Hurst2020-05-211-0/+1
* PD: Remove unnecessary PDCMD taskDiana Z2020-05-201-1/+0
* usb_pd: Rename CONFIG_CMD_PD_CONTROL to CONFIG_HOSTCMD_PD_CONTROLVijay Hiremath2020-05-151-1/+1
* Remove unused CONFIG macrosDaisuke Nojiri2020-05-081-1/+0
* nocturne: Enable TCPMv2Patryk Duda2020-05-051-2/+10
* nocturne: Set ps8xxx as TCPC driver instead of generic tcpciPatryk Duda2020-05-051-2/+2
* CHERRY-PICK: nocturne: MKBP_WAKE_MASK: Set switch event as wake mask.Ravi Chandra Sadineni2020-05-051-1/+1
* CHERRY-PICK: nocturne: Use avg pin value for disconnection.Aseda Aboagye2020-05-051-12/+78
* CHERRY-PICK: Nocturne: Remove VR decay for V1.00A power railRoy Mingi Park2020-05-051-18/+0
* CHERRY-PICK: nocturne: Add internal pull-ups to unused strap pinsDivya Sasidharan2020-05-051-0/+4
* CHERRY-PICK: nocturne : Add logging for base detect voltages.Aseda Aboagye2020-05-051-0/+4
* CHERRY-PICK: nocturne: Add internal pull-downs to unused NVME pinsRoy Mingi Park2020-05-052-11/+3
* CHERRY-PICK: nocturne: Set I2C5 to 1.8V if possible.Puthikorn Voravootivat2020-05-051-3/+3
* CHERRY-PICK: nocturne: Enable CONFIG_THROTTLE_APPuthikorn Voravootivat2020-05-052-0/+18
* CHERRY-PICK: nocturne: Enable CONFIG_CHARGER_PROFILE_OVERRIDE.Aseda Aboagye2020-05-052-0/+61
* CHERRY-PICK: nocturne: Update LED settings (again).Aseda Aboagye2020-05-052-7/+56
* CHERRY-PICK: nocturne: Set input voltage to 9V when batt full.Aseda Aboagye2020-05-051-0/+31
* CHERRY-PICK: nocturne: Enable active discharge on 1.8U and 1.2UAseda Aboagye2020-05-051-0/+3
* driver: Replace BMI160 to BMI in board configChing-Kang Yen2020-04-231-6/+6
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-281-1/+3
* TCPMV1/2: Make the PD Config Flags more consistentSam Hurst2020-02-221-0/+1
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-6/+6
* Charger: Convert boards to use new driver structureDiana Z2020-02-041-0/+11
* usb_mux: cleanup: Replace mux state enums with ec_command bit flagVijay Hiremath2020-01-281-1/+1
* PS8805: Add the delay between releasing reset and the first I2C readWai-Hong Tam2020-01-231-0/+1
* pd: cleanup pd_get_data_roleDenis Brockus2020-01-091-1/+2
* led_pwm: support different pwm modulesTing Shen2019-12-271-6/+10
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-1/+1
* usb_pd_policy: Make a lot of objects commonAseda Aboagye2019-12-102-385/+5
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-013-8/+8
* usb_pd: use enum tcpc_rp_value instead of intCaveh Jalali2019-10-311-1/+1
* printf: Fix formatting errorsEvan Green2019-10-051-1/+1
* volteer: Add RTC resetKeith Short2019-09-292-8/+1
* config: Merge CONFIG_CHARGER_V2 into CONFIG_CHARGERKeith Short2019-09-181-1/+0
* config: Refactor CONFIG_ACCEL_FIFO to enable use of IS_ENABLEDYuval Peress2019-09-031-2/+5
* power: Replace weak attr with __overridableYilun Lin2019-08-221-1/+2
* Remove __7b, __8b and __7bfDenis Brockus2019-07-202-29/+29
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-192-29/+31
View Lorry Controller Status