| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As a followup to CL:3104290, give the TCPCI TRANSMIT and
RX_BUF_FRAME_TYPE types more consistent names. Most of them can be used
for receiving, not just transmitting. Fix lint errors thus revealed.
BUG=b:155476419
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: I399ec479eacc18622fc4d3f55f8bdabf4560fcff
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3125995
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since we have definitions for HPD IRQ and level in the mux flags, extend
this to the HPD update function in the usb_mux structure as well.
BRANCH=None
BUG=b:172222942
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I19c3a65fc821a341338d73fabd7876339b37fe7d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3095437
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, only the virtual mux driver uses the mux ACK feature, but the
actual wait for the host command ACK is a part of the usb_mux general
code. Generalize this mux ACK wait so it's available if needed in the
future for more muxes.
Additionally, moving this wait out of the mux set will allow us to lock
the muxes intelligently between tasks, without keeping the muxes locked
during the inactive ACK wait.
BRANCH=None
BUG=b:172222942,b:186777984
TEST=tast typec.Mode*.manual on voxel
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I61a043425a482cc6f3170548c888d91ec20c2a82
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3078411
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use board-specific override files when generating VIFs for boards.
BUG=b:172276715
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: I197365018ceb8197c22d631cebf4cbce1c0119f7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2785506
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BRANCH=none
BUG=b:178648877
TEST=view in gitiles
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Change-Id: I0ac5581ba7bc512234d40dbf34222422afa9c725
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2650551
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Almost every relevant board copy-pastes 5000 us. Make that the default
and get rid of the redundant definitions. This is the approximate result
of this command:
find . -type f -name *.h | xargs sed -i -E \
'/#define CONFIG_USBC_VCONN_SWAP_DELAY_US[[:space:]]+5000[[:space:]]/d'
BUG=b:144165680
TEST=make buildall
BRANCH=none
Change-Id: Ife86f9752971abcd7ab5ad5a5e607eb2ccbde2ba
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2628132
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace PD_VCONN_SWAP_DELAY with CONFIG_USBC_VCONN_SWAP_DELAY_US. This
is the approximate result of the following command, run from
platform/ec:
find . -type f -\( -name '*.c' -o -name '*.h' -\) | \
xargs sed -iE 's/PD_VCONN_SWAP_DELAY/CONFIG_USBC_VCONN_SWAP_DELAY/g'
Fix some latent formatting errors in usb_pd_protocol.c, because they
were preventing pre-upload hooks from passing.
BUG=b:144165680
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: Icaf3b309c08fdcd162e960cf5dc88185016b5d2d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2628131
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This header cannot currently be accessed by Zephyr since it is in a
driver directory, not an include directory. This header has quite a
bit of public stuff in it, so it seems reasonable to consider
everything public.
Move the header file and update all users.
BUG=b:175434113
BRANCH=none
TEST=make buildall -j30
build volteer on zephyr
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ibba37f47a06783fafb5095f853f2a68d92b6df87
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2607745
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 7dec638eb577aaa3a00d0551d73c276b94ebacb2 introduced two polarity
modes POLARITY_CC1_DTS, POLARITY_CC2_DTS in enum tcpc_cc_polarity, but
in many places there was an assumption that value other than 0 means
that cable is inverted, the most notable example is usb_mux_set(). As a
result kernel sometimes was not reporting SuperSpeed depending on if
cable was inverted or not.
This patch adds mapping from polarity with DTS to polarity without DTS
where necessary.
BUG=b:162254118
BRANCH=none
TEST=Connect ServoV4 to eve and run servod. Make sure that USB-C muxer
is connects USB3.0 lines (servod should set it).
Flash EC ToT on eve. Boot ChromeOS and go to Developer Console.
Run 'dmesg -w', check if device (eg. ethernet adapter) is attached as
SuperSpeed device. Unplug cable, invert and plug again. Kernel
should report that device is attached as SuperSpeed.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Change-Id: I354ef7047240cc8b5db01936b3780fae7387edb5
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2555157
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rename CONFIG_I2C_CONTROLLER and related comments.
BRANCH=None
BUG=None
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ied6a1829bf54a5c9a32e6772982a4b8aa31aaf23
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2518659
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When chipset is transitioning to a new state or on sysjump, the EC
re-negotiates to enter an alternate mode on booting up.
This commit adds support for exiting Thunderbolt mode for SOP' and SOP''
for active cable on chipset transition and also moves all the alternate
mode exit rotines to their respective files.
It also delays deleting the SVID data until after the EXIT_MODE message
has ACKed and avoids pd_dfp_exit_mode() from changing the alternate
mode's internal states.
This commit also makes sure that the mux is set to safe state before
exiting the alternate mode and it is reconfigured according to the
port's current data role on receiving ACK/NAK from the cable/port
partner.
BUG=b:151169925, b:159717794
BRANCH=none
TEST=On reboot, able to exit and re-enter into DisplayPort mode,
Thunderbolt mode with passive cable and thunderbolt mode with
active cable.
Change-Id: If1e48e9f31cd678e23fe89bd3494551b5d1a78f1
Signed-off-by: Ayushee <ayushee.shah@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2415082
Reviewed-by: Abe Levkoy <alevkoy@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a transmit type parameter to functions involved in mode entry; also
add such a parameter to various functions calling those functions. For
DisplayPort-specific definitions or calls, specify SOP; we do not
currently support DisplayPort mode for cable plugs. For TCPMv1-specific
code, specify SOP. TCPMv1 generally assumes that the discovery/mode
structures are 1-dimensional, as they were previously, and changing that
is outside the scope of this CL.
BUG=b:155890173
TEST=Enter DP mode on Volteer with TCPMv2
TEST=Enter DP mode on Volteer with TCPMv1
TEST=Enter TBT mode on Volteer with TCPMV1
BRANCH=none
Change-Id: I8afc75b3f3be8939c4645058ac4a31f24c88fb9e
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2229279
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes retimers appear as generic muxes. By allowing a
chain of muxes they can be stacked up to the new configurations
that zork requires and will continue to work as they did before
on configurations that only have a single mux.
The code used to have two different arrays, 1) muxes and 2)
retimers. On one of the zork configurations the processor
MUX stopped being the primary mux and the retimer took its
place. In a different configuration of that same platform
it left the primary and secondary alone but the mux_set
FLIP operation had to be ignored. Since the same
interfaces needed to be available for both it stopped making
sense to have two different structures and two different
methods of handling them. This consolodates the two into
one.
The platforms that do not have retimers, this change will
not make any difference. For platforms like zork, it will
remove the retimers and make them chained muxes. So
testing on trembyle makes sense to verify,
BUG=b:147593660
BRANCH=none
TEST=verify USB still works on trembyle
Change-Id: I286cf1e302f9bd3dd7e81098ec08514a2a009fe3
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066794
Commit-Queue: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current use of the PD Config Flags are a bit confusing and
has been changed to the following:
The CONFIG_USB_POWER_DELIVERY flag is used to enable and disable
the TCPMv1 and TCPMv2 stacks. And when CONFIG_USB_POWER_DELIVERY
is enabled, one of the following must be enabled:
CONFIG_USB_PD_TCPMV1 - legacy power delivery state machine
CONFIG_USB_PD_TCPMV2 - current power delivery state machine
BUG=b:149993808
BRANCH=none
TEST=make -j buildall
Change-Id: Ie3f8615a75b15b4f1c703f57f3db9e152a471238
Signed-off-by: Sam Hurst <shurst@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2068519
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:145796172
BRANCH=none
TEST=make buildall -j
Change-Id: Ie4ffaf208745764262931501f0dff77b525a4e59
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2017569
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the second half of b/147290482
Cleaning up to use pd_data_role instead of int
BUG=b:147314832
BRANCH=none
TEST=make buildall -j
Change-Id: I2445b06f5f5469fb1f3a968034a83e3ee792e7c7
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1991845
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pd_get_role in the TCPMv1 stack meant pd_get_power_role.
pd_get_role in the TCPMv2 stack meant pd_get_data_role.
This CL will clean that up and make them the correct naming.
pd_get_power_role will also return an enum pd_power_role
type instead of an int.
BUG=b:147290482
BRANCH=none
TEST=make buildall -j
Change-Id: I73ee465401ccd050c2bd151f2fc043a59d95e079
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1991844
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a board specific usb_pd_policy.c file that contains a lot of
code for handling DisplayPort Alternate mode, Google Firmware Update
Alternate mode, as well as some PD policy functions such as deciding to
Accept or Reject a data role swap or a power role swap. Several boards
simply copy/paste this code from project to project as a lot of this
functionality is not actually board specific.
This commit tries to refactor this by pulling the functions that are not
mainly board specific into common code. The functions are made
overridable such that boards that truly do require a different
implementation may do so.
Additionally, this consolidation changes the policy behaviour for some
boards, but they should be for the better. Some examples include that
data swaps are always allowed if we are a UFP (no system image
requirement), power swaps are allowed to become a sink if we are no
longer dual role (e.g. - in suspend), and DisplayPort Alternate Mode is
not entered if the AP is off.
In order to facilitate this refactor, a couple CONFIG_* options were
introduced:
- CONFIG_USB_PD_DP_HPD_GPIO
/* HPD is sent to the GPU from the EC via a GPIO */
- CONFIG_USB_PD_CUSTOM_VDO
/*
* Define this if a board needs custom SNK and/or SRC PDOs.
*
* The default SRC PDO is a fixed 5V/1.5A with PDO_FIXED_FLAGS indicating
* Dual-Role power, USB Communication Capable, and Dual-Role data.
*
* The default SNK PDOs are:
* - Fixed 5V/500mA with the same PDO_FIXED_FLAGS
* - Variable (non-battery) min 4.75V, max PD_MAX_VOLTAGE_MV,
* operational current PD_MAX_CURRENT_MA,
* - Battery min 4.75V, max PD_MAX_VOLTAGE_MV, operational power
* PD_OPERATING_POWER_MW
*/
BUG=chromium:1021724,b:141458448
BRANCH=<as many as we can that are still supported>
TEST=`make -j buildall`
TEST=Flash a kohaku, verify that DP Alt Mode still works with a variety
of DP peripherals
TEST=Repeat above with a nocturne
TEST=Repeat above with an atlas
Change-Id: I18fd7e22dc77fe1dc6c21c38cd7f1bc53cae86cb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1949052
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Certain SKUs of certain boards have lesser number of USB PD ports than
defined by CONFIG_USB_PD_PORT_COUNT. Hence rename
CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNT.
BUG=b:140816510, b:143196487
BRANCH=octopus
TEST=make -j buildall; Boot to ChromeOS
Change-Id: I7c33b27150730a1a3b5813b7b4a72fd24ab73c6a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1879337
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The extentions were added to make the compiler perform most
of the verification that the conversion was being done correctly
to remove 8bit addressing as the standard I2C/SPI address type.
Now that the compiler has verified the code, the extra
extentions are being removed
BUG=chromium:971296
BRANCH=none
TEST=make buildall -j
TEST=verify sensor functionality on arcada_ish
Change-Id: I36894f8bb9daefb5b31b5e91577708f6f9af2a4f
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1704792
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Opt for 7bit slave addresses in EC code. If 8bit is
expected by a driver, make it local and show this in
the naming.
Use __7b, __7bf and __8b as name extensions for i2c/spi
addresses used in the EC codebase. __7b indicates a
7bit address by itself. __7bf indicates a 7bit address
with optional flags attached. __8b indicates a 8bit
address by itself.
Allow space for 10bit addresses, even though this is
not currently being used by any of our attached
devices.
These extensions are for verification purposes only and
will be removed in the last pass of this ticket. I want
to make sure the variable names reflect the type to help
eliminate future 7/8/7-flags confusion.
BUG=chromium:971296
BRANCH=none
TEST=make buildall -j
Change-Id: I2fc3d1b52ce76184492b2aaff3060f486ca45f45
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1699893
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CPRINTS already prints a new line, no need to add another one.
Spotted during boot on kukui, and then realized there are many
more instances:
""
[3.689239 Module 7 is not supported for clock disable
]
""
BRANCH=none
BUG=none
TEST=make buildall -j
TEST=`git grep CPRINTS | grep "\\\\n\""` shows nothing of
interest.
Change-Id: I4d2bbbc65a91fa56c6e6115aa5c353bfd2b384a1
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1660519
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ran the following command:
git grep -l 'Copyright (c)' | \
xargs sed -i 's/Copyright (c)/Copyright/g'
BRANCH=none
BUG=none
TEST=make buildall -j
Change-Id: I6cc4a0f7e8b30d5b5f97d53c031c299f3e164ca7
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1663262
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, tcpc_config assumes TCPCs are on I2C bus. ITE's EC has an
embedded TCPC.
This patch adds bus_type field to struct tcpc_config_t so that a TCPC
location on other type of bus can be specified.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Ieac733011700b351e6323f46070dcf46d9e1154b
Reviewed-on: https://chromium-review.googlesource.com/1640305
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's simply a bad idea to describe a macro in multiple locations.
It'll make it hard to change. It'll be difficult to keep all
locations in sync.
This patch replaces the comment duplicated in all ec.tasklist with
a pointer to the CONFIG_TASK_LIST definition. The macro will be
described in a single place (just like all/most other macros).
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Id658b9d68e742e4334c692b804d9c98c8de21313
Reviewed-on: https://chromium-review.googlesource.com/1551579
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We do not need to set the port_addr variable most places because the
SS-MUX is also the TCPC and the tcpc_config_t information is used
instead.
Remove unused variable setting to avoid confusion.
BRANCH=none
BUG=none
TEST=buildall. phaser USB-C communication (and muxs) still work which is
a nominal case for all of these changes.
Change-Id: I72ee5da251956eb133091974e8dce5ac7f8787c6
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1200064
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds support to configure dualrole setting
per port, so that servo v4 can adjust charge and
dut port separately.
servo will detect charge capability on CHG port
and choose source or sink as appropriate.
Fix null dereference bug in genvif duel to dynamic src_pdo.
"cc" command allows src, snk, srcdts, snkdts configurations.
BRANCH=None
BUG=b:72557427
TEST=charge through and also passive hub. Note Dru doesn't accept DTS hub.
TEST=make buildall -j
Change-Id: I19f1d1a5c37647fec72202191faa4821c06fb460
Signed-off-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1096654
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In rare cases, it is useful to be able to build tests for all boards:
buildall only builds the main image, but -paladin builders also builds
test cases for each board.
Also remove/fix tests for boards that currently fail.
BRANCH=none
BUG=b:35647963
TEST=make buildalltests -j, wait a long time, tests pass.
Change-Id: Id6d978705a40a2045731cb08ad2ca5d62cc12ebb
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1072218
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The pd_custom_vdm is called in common/usb_pd_protocol no
matter you have this defined or not. No where else I see
pd_vdm being used. So we should not have to deal with this
CONFIG_USB_PD_CUSTOM_VDM.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: I4e8b710240ee27b12625d797e7824f29044e6462
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/998520
Commit-Ready: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Tested-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Driver implements TCPC for ANX7447 chip. Enable Type C
port for USB and DP alt mode.
BUG=b:73793947
BRANCH=NONE
TEST=tested compiled binary for pdeval-stm32f072 board with this patch.
Power contract establishment, port role swap, DP alt mode works fine.
Change-Id: Ic11e499fc5fb4aba7732c75e4cb2fee54828c616
Reviewed-on: https://chromium-review.googlesource.com/956790
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Servo_v4 requires the ability to have a different default state per
port. In previous devices, the assumption was that each supported port
had the same default usb pd state and power role. This CL moves the
by the default power role which in turn is derived from
CONFIG_USB_PD_DUAL_ROLE. In addiiton to moving the location, it now
uses 'port' as argument so it can be port specific if required.
PD_DEFAULT_STATE was a board.h specific config, but in practice each
instance used to date was set to PD_STATE_SNK_DISCONNECTED if
CONFIG_USB_PD_DUAL_ROLE was defined and set to
PD_STATE_SRC_DISCONNECTED otherwise.
BUG=chrome-os-partner:61878
BRANCH=servo
TEST=Manual run 'make -j buildall' to verify that all instances of
PD_DEFAULT_STATE were removed.
Change-Id: Iaf40718668732f525485ed7942ee7fc246d3f75d
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431787
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This feature is inconsistent. Not all boards have such a symlink
(for a obvious reason).
This feature is fragile. It's most likely not tested and going to be
broken if not already. Developers won't like it if they have to test
two different ways to build boards before submitting patches.
This feature is not necessary. If you build EC in the standard way
(e.g. make BOARD=samus), these symlinks are not needed.
This feature is wasteful. Extra disk spaces are used and extra lines
are added to Makefile (increasing code complexity slightly).
BUG=chromium:626776
BRANCH=none
TEST=make buildall
Change-Id: Id5444284d773cb0e9225f39abd877441b8f61440
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359321
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium:593822
BRANCH=none
TEST=make buildall
Change-Id: Ic30c1b890da7639aa80a53040ecc5bebfb4be2e8
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/336030
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With commit e9883124ff16, a GPIO_INT macro was added. That change
also required that all instances of GPIO_INT in a board's
gpio.inc file come before any GPIO macros, or the interrupt
handler wouldn't work properly.
This CL just adds a warning comment about requirement to all
gpio.inc files.
BUG=chromium:471331
BRANCH=none
TEST=make buildall, test image on Cr50
This is a change to comments only. There is no new behavior to
verify, although I did run try out one new image just to be sure
nothing stupid happened.
Change-Id: I83f7819929a53bce3a8bae04d15b3ee3bda11738
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329334
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If multiple TCPCs are present on a system then we may have multiple
alert signals, each of which alerts us to the status of a different
TCPC. Make boards with external non cros-ec TCPCs define
tcpc_get_alert_status, which returns alert status based upon any alert
GPIOs present, and then service only ports which are alerting.
BUG=chromium:551683,chrome-os-partner:47851
TEST=Verify snoball PDCMD task sleeps appropriately when no devices are
inserted, and verify ports go to PD_DISCOVERY state when we attach
samus. Also verify that glados / glados_pd can still negotiate PD.
BRANCH=None
Change-Id: Iae6c4e1ef4d6685cb5bf7feef713505925a07c8c
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/313209
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new configuration struct tcpc_config_t that initially defines the
i2c host port and i2c slave address of all TCPCs present on the board.
This will allow us to create boards with multiple TCPCs on different i2c
ports, with arbitrary i2c slave addresses.
BUG=chromium:551078
TEST=Manual on glados. Verify PD communication / charging is still
functional on both PD ports.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I9b2bde85d7f1642e8727c052e064371be7967619
Reviewed-on: https://chromium-review.googlesource.com/311000
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rename usb.h to usb_descriptor.h to prevent conflict with a
commonly-used libusb header.
BUG=chromium:552006
BRANCH=None
TEST=`make buildall -j`
Change-Id: I6145ce120e1fda41bc5c4d4da0313272e76839c7
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/311429
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some chips previously defined CONFIG_I2C and others didn't. Standardize
the usage by removing CONFIG_I2C from all config_chip files and force it
to be defined at the board level. Also, make boards define
CONFIG_I2C_MASTER and/or CONFIG_I2C_SLAVE based on the I2C interfaces
they will use - this will assist with some later cleanup.
BUG=chromium:550206
TEST=`make buildall -j`
BRANCH=None
Change-Id: I2f0970e494ea49611abc315587c7c9aa0bc2d14a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/310070
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change battery and variable sink capabilities for all boards
to account for +/-5% voltage inaccuracy.
BUG=none
BRANCH=none
TEST=test glados with third party variable power supply and make
sure it see's our sink capabilities as 4.75V-21V.
Change-Id: I2481ccbe6c47bfed1a6b8b237329e70bd0f8e4ac
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/308237
Reviewed-by: Todd Broch <tbroch@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove duplicate code for checking request message, but keep
a board specific check of the request message for custom checks
needed on zinger and plankton.
BUG=chrome-os-partner:42490
BRANCH=none
TEST=make -j buildall. run on samus and connect a hoho, make
sure we successfully negotiate a contract.
Change-Id: I7398953a158d340e3e113f5a816b55445a857711
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/305374
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=None
TEST=None
BRANCH=None
Change-Id: I711c89d47e613c6a15531d3b751cb01f5acb4225
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/303935
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add more details about adding a new source file.
Add a reminder for pull-ups on the I2C bus.
Decode PD state machine.
Remove unused second I2C port configuration.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=none
Change-Id: If94a0f47921dac7d3fb9dc1e9879a7c69699d224
Reviewed-on: https://chromium-review.googlesource.com/287830
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refactor the tcpm/tcpc split such that the tcpm driver implements
the alert functionality since it may be unique for different tcpc
chips.
BUG=chrome-os-partner:41842
BRANCH=none
TEST=make -j buildall. run on samus and glados.
Change-Id: I23f2d7f8627d5337b8d001a09bf27622be24fe33
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/281631
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Create driver/tcpm/ folder to hold TCPM drivers. Currently the
two drivers are a stub driver which is used when TCPM and TCPC
are on the same MCU and can make direct calls between the two
and the TCPCI driver which implements the standard TCPCI protocol.
BUG=chrome-os-partner:41842
BRANCH=none
TEST=make -j buildall
Change-Id: Ie4d9b36eb33155254f8b87b83861f98a7a80693a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/281630
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
Base board configuration to evaluate USB PD interface chip by
connecting them a STM32F072 Discovery board.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:41497
TEST=Flash the STM32F072 discovery using the following command:
make flash BOARD=pdeval-stm32f072
then connect to the EC console through the USB port.
Change-Id: Ie3f5dcd04c077be49fbacc020f7af4f298039e8a
Reviewed-on: https://chromium-review.googlesource.com/277713
Tested-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
|