summaryrefslogtreecommitdiff
path: root/board/rammus
Commit message (Collapse)AuthorAgeFilesLines
* rammus: Disable HC debug by defaultGwendal Grignou2022-02-151-0/+8
| | | | | | | | | | | | | | | | Similar to commit 27e8d040b368 ("nocturne: Disable HC debug by default"). When sensors are in use, host queries EC often. BUG=b:205354460 TEST=compile. Apply change in rammus branch, check on DUT that host command messages are gone. BRANCH=rammus Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: Ia828428ab940a0c7faa627fa3655b4f7ce5cd9b8 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3456704 Reviewed-by: Ricardo Quesada <ricardoq@chromium.org>
* TCPM: Change the PS8xxx I2C flags name to match the driverSam Hurst2022-02-101-1/+1
| | | | | | | | | | | | | | | | Change the PS8xxx I2C flags name from PS8751_I2C_ADDR to PS8XXX_I2C_ADDR. BRANCH=main BUG=b:194432779 TEST=make -j buildall Signed-off-by: Sam Hurst <shurst@google.org> Change-Id: Ie8ac1c922c46bb425b7e7b1a39173872d48f6353 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3449669 Tested-by: Sam Hurst <shurst@google.com> Reviewed-by: Wai-Hong Tam <waihong@google.com> Commit-Queue: Sam Hurst <shurst@google.com>
* ec: Rename GMR_TABLET_MODE_GPIO_L to GPIO_TABLET_MODE_LAndrew McRae2022-01-201-1/+1
| | | | | | | | | | | | | | Normalise the name of the tablet mode detection GPIO so that everyboard does not need to redefine it. BUG=none TEST=zmake testall; make buildall BRANCH=none Signed-off-by: Andrew McRae <amcrae@google.com> Change-Id: Ifb458e755d1e00c0cff66a02c78dfccaba2d070c Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3397141 Reviewed-by: Denis Brockus <dbrockus@chromium.org>
* i2c: Use declared initializers for i2c_ports: boards m-zKeith Short2021-11-301-5/+35
| | | | | | | | | | | | | | Convert all instances of i2c_ports[] to use declared initializers. This allows the fields to be reordered without breaking code. BUG=none BRANCH=none TEST=compare_build.sh Signed-off-by: Keith Short <keithshort@chromium.org> Change-Id: Ib4ff8cfd7bd8090c45d8804f0bebcb2426f3cc7e Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3300662 Reviewed-by: Ting Shen <phoenixshen@chromium.org>
* config: rename CONFIG_HOSTCMD_ESPI to CONFIG_HOST_INTERFACE_ESPIKeith Short2021-11-191-1/+1
| | | | | | | | | | | | | | | Rename CONFIG_HOSTCMD_ESPI to CONFIG_HOST_INTERFACE_ESPI. This makes the host interface selection configs distinct from configs used to enable/disable specific host commands. BUG=b:195416058 BRANCH=main TEST=compare_build.sh Signed-off-by: Keith Short <keithshort@chromium.org> Change-Id: I7f52614ca9a0dd54cc7e96e51bba40453564198e Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3095842 Tested-by: Michał Barnaś <mb@semihalf.com>
* tree: Files should end with single newlineTom Hughes2021-10-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | One of the checks that runs as part of "repo upload" looks for a single newline at the end of each file. I'm getting warnings about this when I touch files that do not follow this, even though I didn't add the extra newlines. This commit fixes all files by running the following: for f in $(find . -name '*.[ch]'); do printf '%s\n' "$(cat ${f})" > ${f}; done BRANCH=none BUG=b:172020503 TEST=./util/compare_build.sh -b all -j 120 => MATCH Signed-off-by: Tom Hughes <tomhughes@chromium.org> Change-Id: Ia3ece5b64b549d21ca11708791368002bb6e9b0e Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3229797 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* board: Rename RSMRST_L_PGOOD as PG_EC_RSMRST_ODLfirmware-chameleon-14280.B-mainDivya Sasidharan2021-10-121-1/+1
| | | | | | | | | | | | | | | | | GPIO_RSMRST_L_PGOOD is also used as GPIO_PG_EC_RSMRST_ODL creating redundancy. Removing it will help need for redefinitions for zephyr. Remove reference to GPIO_RSMRST_L_PGOOD in zephyr BUG=b:200975143 BRANCH=main TEST=make buildall -j, boot up on brya Change-Id: Iff46595174c54db347b69cff3ad9e266ba9fd535 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3180808 Reviewed-by: Keith Short <keithshort@chromium.org> Commit-Queue: Keith Short <keithshort@chromium.org>
* board/rammus: Fix enum typeTom Hughes2021-10-081-1/+1
| | | | | | | | | | | | | | | | | | | | When building with clang, it warns: ard/rammus/led.c:160:23: error: implicit conversion from enumeration type 'enum ec_led_state' to different enumeration type 'enum led_charge_state' [-Werror,-Wenum-conversion] config_battery_led(LED_STATE_OFF); BRANCH=none BUG=b:172020503 TEST=make CC=arm-none-eabi-clang BOARD=rammus TEST=./util/compare_build.sh -b rammus => MATCH Signed-off-by: Tom Hughes <tomhughes@chromium.org> Change-Id: I68850029e872702dafed661b908bb8d5986a5daf Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3213107 Reviewed-by: Edward Hill <ecgh@chromium.org>
* rammus: gryo sensor add 2nd source ICM40608Michael5 Chen12021-09-285-2/+98
| | | | | | | | | | | | | | | | gryo sensor add 2nd source icm40608 BUG=b:192817920 BRANCH=rammus TEST=make BOARD=rammus Set CBI SSFC 0x10 and using command "watch ectool motionsense lid_angle" for icm-40608. Signed-off-by: Michael5 Chen1 <michael5_chen1@pegatron.corp-partner.google.com> Change-Id: If64ee373c0c63e074b11b8a37c9d67c70d409f40 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3180700 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Commit-Queue: Gwendal Grignou <gwendal@chromium.org>
* USB MUX: Update mux HPD update interface to use mux_state_tDiana Z2021-09-161-1/+2
| | | | | | | | | | | | | | | | | Since the drivers are now taking a mux_state_t set of flags to update, go ahead and unify the usb_mux API this way as well. It makes the parameters more apparent than the 1/0 inputs, and aligns the stack to use the same parameters. BRANCH=None BUG=b:172222942 TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: Ie943dbdf03818d8497c0e328adf2b9794585d96e Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3095438 Commit-Queue: Abe Levkoy <alevkoy@chromium.org> Reviewed-by: Abe Levkoy <alevkoy@chromium.org>
* rammus: Add accelerometer 2nd source KX022.Michael5 Chen12021-09-115-2/+116
| | | | | | | | | | | | | | | | Add accelerometer 2nd source KX022. BUG=b:197005105 BRANCH=rammus TEST=make BOARD=rammus Using command "watch ectool motionsense lid_angle". Signed-off-by: Michael5 Chen1 <michael5_chen1@pegatron.corp-partner.google.com> Change-Id: Iea7fee7766730a8c054217877abb76facb55976a Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3102685 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Commit-Queue: Zhuohao Lee <zhuohao@chromium.org>
* adc: Remove adc_chip.h where adc.h is usedCaveh Jalali2021-08-271-1/+0
| | | | | | | | | | | | | | This removes the use of adc_chip.h where adc.h is also used. In this case, adc_chip.h is redundant. BRANCH=none BUG=b:181271666 TEST=buildall passes Change-Id: Id7baf9aef949447a4d47934242f9bae97c971262 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3120317 Reviewed-by: Keith Short <keithshort@chromium.org>
* lid_angle: Create a common callback for lid angle changesWai-Hong Tam2021-08-051-3/+1
| | | | | | | | | | | | | | | | | | | | | | Each board defines its own callback lid_angle_peripheral_enable(). The implementation is very similar. Create a common implementation and reduce the duplicated code. This CL removes the board callbacks which are identifical to the common callback. If it is slightly different, keep it and add the __override tag. The check of TEST_BUILD is unnecessary as the board callback is not linked in the test build. BRANCH=None BUG=b:194922043 TEST=Build all the images. Change-Id: I73d381730f35b80eff69399cdfc5fb54f839aee0 Signed-off-by: Wai-Hong Tam <waihong@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3069175 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* chgstv2: Unify power-on and shutdown battery thresholdsDaisuke Nojiri2021-06-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, power-on battery SoC and shutdown battery SoC are independently configured by each board. This patch will unify the setting as follows: CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON = 2 (don't boot if soc < 2%) CONFIG_BATT_HOST_SHUTDOWN_PERCENTAGE = 2 (shutdown if soc <= 2%) BATTERY_LEVEL_SHUTDOWN = 3 (shutdown if soc < 3%) CONFIG_BATTERY_EXPORT_DISPLAY_SOC = Y (removed) CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON_WITH_AC = 1 This allows us to show the low battery alert whenever we can because EC doesn't inhibit power-on even if it knows the host would immediately shut down. With CONFIG_BATTERY_EXPORT_DISPLAY_SOC, boards will start using the CONFIG_BATT_HOST_SHUTDOWN_PERCENTAGE = 2% as the low battery threshold (and the SoC will be agreed between the EC and Powerd). Boards with CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON = 1 will keep the same threshold. This is for avoiding degrading the UX by increasing the power-on threshold (even though a question that 1% may not be enough for soft sync to finish consistently remains to be answered). Boards with CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON > 2 will have a lower threshold but we think 2% is enough to finish the software sync. A lower threshold also improves the UX by showing the low battery alert in the situation where otherwise the system would leave the user uninformed by not responding to a power button press. BUG=b:191837893 BRANCH=None TEST=buildall Change-Id: If6ff733bc181f929561a3fffb8a84e760668ce37 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2981468 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* config: Rename CONFIG_CROS_BOARD_INFOPhilip Chen2021-06-161-1/+1
| | | | | | | | | | | | | | | | | | Rename CONFIG_CROS_BOARD_INFO to CONFIG_CBI_EEPROM to make it clear that the information comes from on-board EEPROM. It sets up the groundwork for adding more options of CBI sources later. BRANCH=None BUG=b:186264627 TEST=make buildall -j Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I9a6feee0a8b35bbf29e445544243485507767ad8 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2945792 Reviewed-by: Philip Chen <philipchen@chromium.org> Commit-Queue: Philip Chen <philipchen@chromium.org> Tested-by: Philip Chen <philipchen@chromium.org>
* genvif: Use VIF overrides by defaultAbe Levkoy2021-03-301-0/+3
| | | | | | | | | | | | | | Use board-specific override files when generating VIFs for boards. BUG=b:172276715 TEST=make buildall BRANCH=none Signed-off-by: Abe Levkoy <alevkoy@chromium.org> Change-Id: I197365018ceb8197c22d631cebf4cbce1c0119f7 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2785506 Reviewed-by: Denis Brockus <dbrockus@chromium.org> Commit-Queue: Denis Brockus <dbrockus@chromium.org>
* config: Provide default VCONN Swap delayAbe Levkoy2021-01-221-1/+0
| | | | | | | | | | | | | | | | | Almost every relevant board copy-pastes 5000 us. Make that the default and get rid of the redundant definitions. This is the approximate result of this command: find . -type f -name *.h | xargs sed -i -E \ '/#define CONFIG_USBC_VCONN_SWAP_DELAY_US[[:space:]]+5000[[:space:]]/d' BUG=b:144165680 TEST=make buildall BRANCH=none Change-Id: Ife86f9752971abcd7ab5ad5a5e607eb2ccbde2ba Signed-off-by: Abe Levkoy <alevkoy@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2628132 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* config: Make VCONN Swap delay a documented optionAbe Levkoy2021-01-221-1/+1
| | | | | | | | | | | | | | | | | | | | | Replace PD_VCONN_SWAP_DELAY with CONFIG_USBC_VCONN_SWAP_DELAY_US. This is the approximate result of the following command, run from platform/ec: find . -type f -\( -name '*.c' -o -name '*.h' -\) | \ xargs sed -iE 's/PD_VCONN_SWAP_DELAY/CONFIG_USBC_VCONN_SWAP_DELAY/g' Fix some latent formatting errors in usb_pd_protocol.c, because they were preventing pre-upload hooks from passing. BUG=b:144165680 TEST=make buildall BRANCH=none Signed-off-by: Abe Levkoy <alevkoy@chromium.org> Change-Id: Icaf3b309c08fdcd162e960cf5dc88185016b5d2d Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2628131 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org> Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
* Refactor CONFIG_FLASH_SIZE to CONFIG_FLASH_SIZE_BYTESYuval Peress2021-01-151-1/+1
| | | | | | | | | | | | | | | | | | | | | In Zephyr CONFIG_FLASH_SIZE is a Kconfig value that is used throughout. The issue is that the units don't match. In Zephyr the value is in KiB instead of bytes. This refactor simply renames CONFIG_FLASH_SIZE in platform/ec to include the unit (via _BYTES). BRANCH=none BUG=b:174873770 TEST=make buildall be generated by the build instead of per board Signed-off-by: Yuval Peress <peress@chromium.org> Change-Id: I44bf3c7a20fcf62aaa9ae15715be78db4210f384 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2627638 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Hughes <tomhughes@chromium.org> Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
* task_set_event: remove the wait argumentDawid Niedzwiecki2020-12-141-2/+2
| | | | | | | | | | | | | | | | | | | | There is an option in the task_set_event function which force the calling task to wait for an event. However, the option is never used thus remove it. This also will help in the Zephyr migration process. BUG=b:172360521 BRANCH=none TEST=make buildall Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com> Change-Id: Ic152fd3d6862d487bcc0024c48d136556c0b81bc Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2521599 Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Tom Hughes <tomhughes@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
* COIL: Rename CONFIG_I2C_CONTROLLERDiana Z2020-11-051-1/+1
| | | | | | | | | | | | | Rename CONFIG_I2C_CONTROLLER and related comments. BRANCH=None BUG=None TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: Ied6a1829bf54a5c9a32e6772982a4b8aa31aaf23 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2518659 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* Charger: Add dynamic charger chip countDiana Z2020-07-111-2/+0
| | | | | | | | | | | | | | | | Different DB options may cause different numbers of charger chips to be present on the system. Remove constant count for charger chips, and instead always call into the overridable function to query the count. BRANCH=None BUG=b:155963446 TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: I0e65b8af351ecabe6f7b823e0e56f1932cc280a6 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2277833 Commit-Queue: Aseda Aboagye <aaboagye@chromium.org> Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* Swap system_jumped_to_this_image with system_jumped_latestabilize-quickfix-13310.91.B-masterstabilize-quickfix-13310.76.B-masterstabilize-quickfix-13310.73.B-masterstabilize-13310.99.B-masterstabilize-13310.94.B-masterstabilize-13310.83.B-masterstabilize-13310.74.B-masterstabilize-13310.72.B-masterrelease-R85-13310.B-masterDaisuke Nojiri2020-06-261-2/+2
| | | | | | | | | | | | | | | | | | | | EFS2 boards need to call system_jumped_late in HOOK_INIT to avoid running init code twice per boot. system_jumped_to_this_image and system_jumped_late are functionally equivalent for non EFS2 boards. This patch will prevent system_jumped_to_this_image from being used for EFS2 boards when code is copied from a past project. BUG=chromium:1072743 BRANCH=none TEST=buildall Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I73fb5cedc5325d1c80825f9346954013046ee1df Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2267685 Reviewed-by: Keith Short <keithshort@chromium.org>
* PD: Remove unnecessary PDCMD taskDiana Z2020-05-201-1/+0
| | | | | | | | | | | | | | | | | | | The PDCMD task is only pulling interrupts from the TCPCs on most boards, which is unnecessary since the PD_INT tasks handle this job now. Remove it from any boards using the PD_INT command which are not using the older CONFIG_HOSTCMD_PD functionality (ex. samus, oak). Located boards using: find -name "ec.tasklist" | xargs grep -l PD_INT | xargs grep PDCMD BRANCH=None BUG=b:154959596 TEST=make -j buildall Signed-off-by: Diana Z <dzigterman@chromium.org> Change-Id: I29be8ab1d7a2616603fb55236aed4329ed8654f5 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2208221 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* usb_pd: Rename CONFIG_CMD_PD_CONTROL to CONFIG_HOSTCMD_PD_CONTROLVijay Hiremath2020-05-151-1/+1
| | | | | | | | | | | | BUG=none BRANCH=none TEST=make buildall -j Change-Id: I33a63d6ac45bbd46da74db34a21d1bb130476362 Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2196946 Reviewed-by: Sooraj Govindan <sooraj.govindan@intel.corp-partner.google.com> Reviewed-by: Keith Short <keithshort@chromium.org>
* Various boards: Shrink UART Tx buffer to save spaceAbe Levkoy2020-05-011-1/+1
| | | | | | | | | | | | | | | | Future USB-PD discovery changes will need that space. In each case, reduce the size of the buffer by half (must be a power of 2). Note: This change is only to save shared memory space in the ToT build. It should not be picked onto release branches. BUG=b:152420269,b:152419795 TEST=make buildall BRANCH=none Change-Id: Ia26c1cdd7eb4068d410b81bb4a3335d2c9142049 Signed-off-by: Abe Levkoy <alevkoy@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2163795
* driver: Replace BMI160 to BMI in board configChing-Kang Yen2020-04-231-6/+6
| | | | | | | | | | | | | | | | | Replace some macro of BMI160 to BMI version for common function of BMI series. Make board config include the accelgyro_bmi_common.h instead of accel_gyro_bmi160.h. BRANCH=None BUG=b:146144827 TEST=make buildall -j Change-Id: I043ff8a92f15295ead3fa5c1e292319e2b4fa21a Signed-off-by: Ching-Kang Yen <chingkang@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2156525 Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
* common/keyboard_vivaldi: New keyboard framework for custom layoutRajat Jain2020-04-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vivaldi is a new keyboard that allows individual boards to have additional or different top row keys and/or to reorder those keys. The primary agenda of vivaldi is to allow customization of the top row keys. However, as a secondary objective, it also allows coreboot to send a keymap to the kernel, for only the keys that are actually present on the keyboard. As part of enabling vivaldi, another feature that get enabled is to start sending action codes instead of function codes for the top row of the keyboard. go/vivaldi-prd go/vivaldi-design go/vivaldi-fw-design With this patch, things remain unchanged for any boards that do not provide board_set_vivaldi_keybd_config(). For boards that do provide it: * EC begins to send action scancodes instead of function scancodes for the top row when top row keys are pressed. * EC responds to an EC command from the coreboot, that asks for the layout for the keyboard. Coreboot uses this to expose corresponding keycodes to the kernel. BUG=b:146501925 TEST=Check on Jinlon the (new) expected scancodes are output from EC. BRANCH=firmware-hatch-12672.B Signed-off-by: Rajat Jain <rajatja@google.com> Change-Id: I1f45ce6eee138a984f8d4caef1ec76c9538dd30b Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2135566
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-281-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes retimers appear as generic muxes. By allowing a chain of muxes they can be stacked up to the new configurations that zork requires and will continue to work as they did before on configurations that only have a single mux. The code used to have two different arrays, 1) muxes and 2) retimers. On one of the zork configurations the processor MUX stopped being the primary mux and the retimer took its place. In a different configuration of that same platform it left the primary and secondary alone but the mux_set FLIP operation had to be ignored. Since the same interfaces needed to be available for both it stopped making sense to have two different structures and two different methods of handling them. This consolodates the two into one. The platforms that do not have retimers, this change will not make any difference. For platforms like zork, it will remove the retimers and make them chained muxes. So testing on trembyle makes sense to verify, BUG=b:147593660 BRANCH=none TEST=verify USB still works on trembyle Change-Id: I286cf1e302f9bd3dd7e81098ec08514a2a009fe3 Signed-off-by: Denis Brockus <dbrockus@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066794 Commit-Queue: Jett Rink <jettrink@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* TCPMV1/2: Make the PD Config Flags more consistentSam Hurst2020-02-221-0/+1
| | | | | | | | | | | | | | | | | | | | The current use of the PD Config Flags are a bit confusing and has been changed to the following: The CONFIG_USB_POWER_DELIVERY flag is used to enable and disable the TCPMv1 and TCPMv2 stacks. And when CONFIG_USB_POWER_DELIVERY is enabled, one of the following must be enabled: CONFIG_USB_PD_TCPMV1 - legacy power delivery state machine CONFIG_USB_PD_TCPMV2 - current power delivery state machine BUG=b:149993808 BRANCH=none TEST=make -j buildall Change-Id: Ie3f8615a75b15b4f1c703f57f3db9e152a471238 Signed-off-by: Sam Hurst <shurst@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2068519 Reviewed-by: Diana Z <dzigterman@chromium.org>
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-5/+5
| | | | | | | | | | | | | | The action_delay_sec field hasn't actually been referenced by any code since 2013. Removing the corresponding struct field. BUG=None BRANCH=None TEST=builds Change-Id: Ia7334c26b85d0161ff61bb51fbdda61bb921595a Signed-off-by: Diana Z <dzigterman@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2054945 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* Charger: Convert boards to use new driver structureDiana Z2020-02-041-0/+12
| | | | | | | | | | | | | | | This commit removes the temporary common charger chip configuration and instead puts the configuration in each board. BRANCH=none BUG=b:147672225 TEST=builds, runs on waddledoo and octopus Change-Id: If81aef31e48c65999a87e202494f286716114bbb Signed-off-by: Diana Z <dzigterman@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2031855 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* pd: cleanup pd_get_data_roleDenis Brockus2020-01-091-1/+2
| | | | | | | | | | | | | | | This is the second half of b/147290482 Cleaning up to use pd_data_role instead of int BUG=b:147314832 BRANCH=none TEST=make buildall -j Change-Id: I2445b06f5f5469fb1f3a968034a83e3ee792e7c7 Signed-off-by: Denis Brockus <dbrockus@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1991845 Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Required by Android CDD - Section 7.3.1 - Paragraph C.1.4 Modified mechanically with: for i in $(grep -lr "\.default_range" board); do sed -i '/.default_range =/s#\(.*\.default_range = \).* /\ \* g.*#\14, /* g, to meet CDD 7.3.1/C-1-4 reqs */#' $i done Manually reworked to only change the accelerometer that matters to android: The lid accelerometer or the base accelerometer if the base also hosts the gyroscope. This is only for future EC, no need to land the change on branches: mems_setup will take care to set accelerometer ranges at 4g on startup. BUG=b:144004449 BRANCH=none TEST=compile Change-Id: If8c14b2e928c9c70c0ce51451adcfcd674a9e73b Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1957375 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Alexandru M Stan <amstan@chromium.org>
* usb_pd_policy: Make a lot of objects commonAseda Aboagye2019-12-101-309/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a board specific usb_pd_policy.c file that contains a lot of code for handling DisplayPort Alternate mode, Google Firmware Update Alternate mode, as well as some PD policy functions such as deciding to Accept or Reject a data role swap or a power role swap. Several boards simply copy/paste this code from project to project as a lot of this functionality is not actually board specific. This commit tries to refactor this by pulling the functions that are not mainly board specific into common code. The functions are made overridable such that boards that truly do require a different implementation may do so. Additionally, this consolidation changes the policy behaviour for some boards, but they should be for the better. Some examples include that data swaps are always allowed if we are a UFP (no system image requirement), power swaps are allowed to become a sink if we are no longer dual role (e.g. - in suspend), and DisplayPort Alternate Mode is not entered if the AP is off. In order to facilitate this refactor, a couple CONFIG_* options were introduced: - CONFIG_USB_PD_DP_HPD_GPIO /* HPD is sent to the GPU from the EC via a GPIO */ - CONFIG_USB_PD_CUSTOM_VDO /* * Define this if a board needs custom SNK and/or SRC PDOs. * * The default SRC PDO is a fixed 5V/1.5A with PDO_FIXED_FLAGS indicating * Dual-Role power, USB Communication Capable, and Dual-Role data. * * The default SNK PDOs are: * - Fixed 5V/500mA with the same PDO_FIXED_FLAGS * - Variable (non-battery) min 4.75V, max PD_MAX_VOLTAGE_MV, * operational current PD_MAX_CURRENT_MA, * - Battery min 4.75V, max PD_MAX_VOLTAGE_MV, operational power * PD_OPERATING_POWER_MW */ BUG=chromium:1021724,b:141458448 BRANCH=<as many as we can that are still supported> TEST=`make -j buildall` TEST=Flash a kohaku, verify that DP Alt Mode still works with a variety of DP peripherals TEST=Repeat above with a nocturne TEST=Repeat above with an atlas Change-Id: I18fd7e22dc77fe1dc6c21c38cd7f1bc53cae86cb Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1949052 Tested-by: Aseda Aboagye <aaboagye@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Diana Z <dzigterman@chromium.org> Reviewed-by: Denis Brockus <dbrockus@chromium.org> Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-013-9/+10
| | | | | | | | | | | | | | | | | Certain SKUs of certain boards have lesser number of USB PD ports than defined by CONFIG_USB_PD_PORT_COUNT. Hence rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNT. BUG=b:140816510, b:143196487 BRANCH=octopus TEST=make -j buildall; Boot to ChromeOS Change-Id: I7c33b27150730a1a3b5813b7b4a72fd24ab73c6a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1879337 Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Commit-Queue: Jett Rink <jettrink@chromium.org>
* usb_pd: use enum tcpc_rp_value instead of intCaveh Jalali2019-10-311-1/+1
| | | | | | | | | | | | | | | this changes the declaration and definitions of typec_set_source_current_limit() to take an enum tcpc_rp_value instead of int. BRANCH=none BUG=none TEST=buildall passes Change-Id: If633641a581eeb6085b94bc727e23fb57f7cd435 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1889117 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* eSPI: Configure SLP_S3, SLP_S4 separatelyAbe Levkoy2019-10-301-1/+2
| | | | | | | | | | | | | | | | | | Split the configuration option CONFIG_HOSTCMD_ESPI_VW_SLP_SIGNALS into separate options controlling SLP_S3 and SLP_S4. Allow volteer to configure SLP_S3 as a GPIO and SLP_S4 as an eSPI virtual wire. Cause a build error if virtual wires are configured, but eSPI is not. BUG=b:139553375,b:143288478 TEST=make buildall TEST=Build volteer with CONFIG_HOSTCMD_ESPI_VW_S4 defined but CONFIG_HOSTCMD_ESPI undefined; observe build error BRANCH=none Change-Id: I8c6737e2ccb1a77a882e5fa65c6eddb342209b61 Signed-off-by: Abe Levkoy <alevkoy@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1881758 Reviewed-by: Keith Short <keithshort@chromium.org>
* tablet_mode: Renaming for GMR sensorPhilip Chen2019-09-192-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GMR sensors can be used to (1) detect clamshell/tablet mode (2) detect lid open/closed But hall sensors can only do (2). Therefore the naming related to "hall sensor" for tablet mode application is incorrect. This patch performs the following renaming to better reflect the reality: config: CONFIG_HALL_SENSOR -> CONFIG_GMR_TABLET_MODE CONFIG_HALL_SENSOR_CUSTOM -> CONFIG_GMR_TABLET_MODE_CUSTOM CONFIG_DPTF_MOTION_LID_NO_HALL_SENSOR -> CONFIG_DPTF_MOTION_LID_NO_GMR_SENSOR GPIO: HALL_SENSOR_GPIO_L -> GMR_TABLET_MODE_GPIO_L functions: hall_sensor_disable() -> gmr_tablet_switch_disable() hall_sensor_isr() -> gmr_tablet_switch_isr() hall_sensor_int() -> gmr_tablet_switch_init() variable: hall_sensor_at_360 -> gmr_sensor_at_360 BUG=b:139378190 BRANCH=none TEST=make buildall Change-Id: I28393d056ddd128d8ffafc16a1f9fefee5455ccc Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1757275 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aseda Aboagye <aaboagye@chromium.org> Commit-Queue: Philip Chen <philipchen@chromium.org> Tested-by: Philip Chen <philipchen@chromium.org>
* config: Merge CONFIG_CHARGER_V2 into CONFIG_CHARGERKeith Short2019-09-181-1/+0
| | | | | | | | | | | | | | | | For all boards that defined CONFIG_CHARGER, CONFIG_CHARGER_V2 is also defined. Remove references to CONFIG_CHARGER_V2 from board header files. Replace CONFIG_CHARGER_V2 in common C modules with CONFIG_CHARGER when appropriate. BUG=b:139699769 BRANCH=none TEST=make buildall -j Change-Id: I6b54baf4ad2406bbed629b6b272dad9ea6a81280 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1789420 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* config: Refactor CONFIG_ACCEL_FIFO to enable use of IS_ENABLEDYuval Peress2019-09-031-3/+4
| | | | | | | | | | | | | | | This change allows us to use the IS_ENABLED condition to replace the various ifdef guards around the CONFIG_ACCEL_FIFO BUG=b:137758297,chromium:981990 BRANCH=None TEST=buildall and CTS tests on Arcada Change-Id: I65d36bac19855e51c830a33e6f3812575e8d15d9 Signed-off-by: Yuval Peress <peress@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1704164 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
* power: Replace weak attr with __overridableYilun Lin2019-08-221-1/+2
| | | | | | | | | | | | | | | | | This CL annotates __overridable to the following functions: board_system_is_idle power_chipset_handle_host_sleep_event power_board_handle_host_sleep_event TEST=make buildall BUG=none BRANCH=none Change-Id: I0168b69c49fab5672238711d4f3a6a5517cdd8b3 Signed-off-by: Yilun Lin <yllin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1761759 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* Remove __7b, __8b and __7bfDenis Brockus2019-07-202-25/+25
| | | | | | | | | | | | | | | | | | | The extentions were added to make the compiler perform most of the verification that the conversion was being done correctly to remove 8bit addressing as the standard I2C/SPI address type. Now that the compiler has verified the code, the extra extentions are being removed BUG=chromium:971296 BRANCH=none TEST=make buildall -j TEST=verify sensor functionality on arcada_ish Change-Id: I36894f8bb9daefb5b31b5e91577708f6f9af2a4f Signed-off-by: Denis Brockus <dbrockus@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1704792 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-192-25/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Opt for 7bit slave addresses in EC code. If 8bit is expected by a driver, make it local and show this in the naming. Use __7b, __7bf and __8b as name extensions for i2c/spi addresses used in the EC codebase. __7b indicates a 7bit address by itself. __7bf indicates a 7bit address with optional flags attached. __8b indicates a 8bit address by itself. Allow space for 10bit addresses, even though this is not currently being used by any of our attached devices. These extensions are for verification purposes only and will be removed in the last pass of this ticket. I want to make sure the variable names reflect the type to help eliminate future 7/8/7-flags confusion. BUG=chromium:971296 BRANCH=none TEST=make buildall -j Change-Id: I2fc3d1b52ce76184492b2aaff3060f486ca45f45 Signed-off-by: Denis Brockus <dbrockus@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1699893 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
* intel_x86/power: Consolidate chipset specific power signals arrayVijay Hiremath2019-06-132-27/+0
| | | | | | | | | | | | | | | Currently chipset specific power signals are defined at board/baseboard level. These power signals are moved to chipset specific file to minimize the redundant power signals array defined for each board/baseboard. BUG=b:134079574 BRANCH=none TEST=make buildall -j Change-Id: I351904f7cd2e0f27844c0711beb118d390219581 Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1636837 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* TCPC: Make tcpc_config handle other bus typesDaisuke Nojiri2019-06-101-9/+11
| | | | | | | | | | | | | | | | | | | | | Currently, tcpc_config assumes TCPCs are on I2C bus. ITE's EC has an embedded TCPC. This patch adds bus_type field to struct tcpc_config_t so that a TCPC location on other type of bus can be specified. Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> BUG=none BRANCH=none TEST=buildall Change-Id: Ieac733011700b351e6323f46070dcf46d9e1154b Reviewed-on: https://chromium-review.googlesource.com/1640305 Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
* common: motion_sense: Require CONFIG_MOTION_SENSOR_MAX_COUNTYuval Peress2019-06-051-0/+1
| | | | | | | | | | | | | | | This changes requires all boards to define the maximum number of sensors they support. This will allow us to later create static arrays with the appropriate length. BUG=chromium:966506 BRANCH=None TEST=make buildall Change-Id: I5a2fa8f0fdcaef69065dfd4c2bfea4e3f371e986 Signed-off-by: Yuval Peress <peress@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1637414 Reviewed-by: Jett Rink <jettrink@chromium.org>
* rammus: turn USB type-A charging mode on by CONFIG of default mode not CDP.Marco Chen2019-05-231-1/+1
| | | | | | | | | | | | | | | | | | In usb_port_power_smart.c, we restore charging mode to CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE instead of USB_CHARGE_MODE_CDP directly. The benefit is that when we change the default mode, we don't need to amend usb_port_power_smart.c. This should be applied to this board.c as well. BUG=b:130767435 BRANCH=rammus TEST=`make BOARD=rammus -j4` Change-Id: I0aef5bf3856eca82cb210c2a48ba31065e58e710 Signed-off-by: Marco Chen <marcochen@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1621450 Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
* tcpm: Refactor tcpc_config to include a flags fieldScott Collyer2019-04-171-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | tcpc_config contained a field for both the alert polarity and open drain/push pull configuration. There is also a possible difference in TCPC reset polarity. Instead of adding yet another field to describe this configuration, it would be better to convert alert polairty, open drain and reset polarity into a single flags field. This CL modifies the tcpc_config struct to use a single flags field and adds defines for what existing flag options can be. BUG=b:130194031 BRANCH=none TEST=make -j buildall Change-Id: Ifb7e7604edb7021fb2d36ee279049eb52fefc99e Signed-off-by: Scott Collyer <scollyer@google.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://chromium-review.googlesource.com/1551581 Commit-Ready: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
* ec.tasklist: Consolidate duplicate commentsDaisuke Nojiri2019-04-081-14/+1
| | | | | | | | | | | | | | | | | | | | | | | It's simply a bad idea to describe a macro in multiple locations. It'll make it hard to change. It'll be difficult to keep all locations in sync. This patch replaces the comment duplicated in all ec.tasklist with a pointer to the CONFIG_TASK_LIST definition. The macro will be described in a single place (just like all/most other macros). Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> BUG=none BRANCH=none TEST=buildall Change-Id: Id658b9d68e742e4334c692b804d9c98c8de21313 Reviewed-on: https://chromium-review.googlesource.com/1551579 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org>
View Lorry Controller Status