| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since the drivers are now taking a mux_state_t set of flags to update,
go ahead and unify the usb_mux API this way as well. It makes the
parameters more apparent than the 1/0 inputs, and aligns the stack to
use the same parameters.
BRANCH=None
BUG=b:172222942
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ie943dbdf03818d8497c0e328adf2b9794585d96e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3095438
Commit-Queue: Abe Levkoy <alevkoy@chromium.org>
Reviewed-by: Abe Levkoy <alevkoy@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since we have definitions for HPD IRQ and level in the mux flags, extend
this to the HPD update function in the usb_mux structure as well.
BRANCH=None
BUG=b:172222942
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I19c3a65fc821a341338d73fabd7876339b37fe7d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3095437
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This removes the use of adc_chip.h where adc.h is also used. In this
case, adc_chip.h is redundant.
BRANCH=none
BUG=b:181271666
TEST=buildall passes
Change-Id: Id7baf9aef949447a4d47934242f9bae97c971262
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3120317
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are 2 tablet mode triggers:
* Lid: when the lid angle close to 360 degree, either detected by
a GMR sensor or by the angle computed by 2 motion sensors.
* Base: when the detachable base is detached.
These 2 triggers set the tablet mode status, which as a boolean,
resulting a race condition.
This CL fixes the race condition. Each trigger updates its own bit. The
final tablet mode status is the OR of all bits.
BRANCH=Trogdor
BUG=b:193873098
TEST=Attached the base, checked tablet_mode enabled;
detached the base, checked tablet_mode disabled;
flip base to 360 degree, checked tablet_mode disabled;
move the base out of the lid, checked tablet_mode disabled.
Change-Id: Ia9d9d2d66c194796c1039cc8b746c8d1f28a4496
Signed-off-by: Wai-Hong Tam <waihong@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3044414
Reviewed-by: Ting Shen <phoenixshen@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently keyboard_scan_config is defined by each board using
CONFIG_KEYBOARD_BOARD_CONFIG. This patch makes it defined as
__override hence removes CONFIG_KEYBOARD_BOARD_CONFIG.
BUG=None
BRANCH=None
TEST=buildall
Change-Id: I53a356741ba4d00e829ca59b74ee6dc704188728
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3044403
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Commit-Queue: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the "thermistor.h" header to the include/driver/temp_sensor
directory. It is used by the Zephyr shim, so the change is useful to
include the header.
BUG=b:180403276
BRANCH=none
TEST=make buildall
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Change-Id: I0e83df97e50a3b324440b65ddb900ddf135f2439
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2843323
Reviewed-by: Keith Short <keithshort@chromium.org>
Commit-Queue: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Different DB options may cause different numbers of charger chips to be
present on the system. Remove constant count for charger chips, and
instead always call into the overridable function to query the count.
BRANCH=None
BUG=b:155963446
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I0e65b8af351ecabe6f7b823e0e56f1932cc280a6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2277833
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This command is unrelated to the PDCMD task and can be safely pulled
into the common PD host command code. After this commit, most boards
using the PD_INT tasks may safely remove the PDCMD task from their
boards.
BRANCH=None
BUG=b:154959596
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I2915acd5398a5dc7da2e6daff1e213fc8dfbadc8
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2208220
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split ps874x.[ch] into ps8740.[ch] and ps8743.[ch]
since we need to support both at runtime for Dalboz.
I left PS8742 in ps8740.[ch] since it is not very different.
BUG=b:153454399
BRANCH=none
TEST=make -j buildall
Signed-off-by: Edward Hill <ecgh@chromium.org>
Change-Id: I92b02e08f377d1781c130a0bbe1482a936ad7a4d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2151647
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes retimers appear as generic muxes. By allowing a
chain of muxes they can be stacked up to the new configurations
that zork requires and will continue to work as they did before
on configurations that only have a single mux.
The code used to have two different arrays, 1) muxes and 2)
retimers. On one of the zork configurations the processor
MUX stopped being the primary mux and the retimer took its
place. In a different configuration of that same platform
it left the primary and secondary alone but the mux_set
FLIP operation had to be ignored. Since the same
interfaces needed to be available for both it stopped making
sense to have two different structures and two different
methods of handling them. This consolodates the two into
one.
The platforms that do not have retimers, this change will
not make any difference. For platforms like zork, it will
remove the retimers and make them chained muxes. So
testing on trembyle makes sense to verify,
BUG=b:147593660
BRANCH=none
TEST=verify USB still works on trembyle
Change-Id: I286cf1e302f9bd3dd7e81098ec08514a2a009fe3
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2066794
Commit-Queue: Jett Rink <jettrink@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The action_delay_sec field hasn't actually been referenced by
any code since 2013. Removing the corresponding struct field.
BUG=None
BRANCH=None
TEST=builds
Change-Id: Ia7334c26b85d0161ff61bb51fbdda61bb921595a
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2054945
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit removes the temporary common charger chip configuration and
instead puts the configuration in each board.
BRANCH=none
BUG=b:147672225
TEST=builds, runs on waddledoo and octopus
Change-Id: If81aef31e48c65999a87e202494f286716114bbb
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2031855
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The other driver structure members return an ec_error_list value and
fill in parameters to return data. This commit changes the
get_vbus_voltage call to follow that model.
BRANCH=None
BUG=b:147672225
TEST=builds
Change-Id: I7308502a9734274dd308b830762493c4d70d147a
Signed-off-by: Diana Z <dzigterman@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2015340
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The PI3USB3X532 driver in the EC assumes that all superspeed muxes are
on the same i2c bus, I2C_PORT_USB_MUX. However, that may not be true
for some boards. This commit utilizes the MUX_PORT(...) macro to
determine the i2c port to use from the usb_mux table. The boards that
use this driver have been updated to pack the i2c port in the port_addr
member. There should be no functional changes to those boards.
BUG=b:147689445
BRANCH=None
TEST=`make -j buildall`
Change-Id: If6460b84a5e39610d658f06a42ca1db0bd4da048
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2013658
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Pericom PI3USB30532 usb mux driver will actually also work for the
PI3USB31532. This commit renames the driver to reflect this while also
adding the PI3USB31532 to the list of supported USB muxes.
BUG=b:146654043
BRANCH=None
TEST=`make -j buildall`
Change-Id: Ic8e2852a3e038b05eb18d1d9db210b7fdce957d7
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1990362
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Certain SKUs of certain boards have lesser number of USB PD ports than
defined by CONFIG_USB_PD_PORT_COUNT. Hence rename
CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNT.
BUG=b:140816510, b:143196487
BRANCH=octopus
TEST=make -j buildall; Boot to ChromeOS
Change-Id: I7c33b27150730a1a3b5813b7b4a72fd24ab73c6a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1879337
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the host command handler callback function returns an int, it's easy
to accidentally mix up the enum ec_error_list and enum ec_status types.
The host commands always expect an enum ec_status type, so we change the
return value to be of that explicit type. Compilation will then fail if
you accidentally try to return an enum ec_error_list value.
Ran the following commands and then manually fixed up a few remaining
instances that were not caught:
git grep --name-only 'static int .*(struct host_cmd_handler_args \*args)' |\
xargs sed -i 's#static int \(.*\)(struct host_cmd_handler_args \*args)#\
static enum ec_status \1(struct host_cmd_handler_args \*args)##'
git grep --name-only 'int .*(struct host_cmd_handler_args \*args)' |\
xargs sed -i 's#int \(.*\)(struct host_cmd_handler_args \*args)#\
enum ec_status \1(struct host_cmd_handler_args \*args)##'
BRANCH=none
BUG=chromium:1004831
TEST=make buildall -j
Cq-Depend: chrome-internal:1872675
Change-Id: Id93df9387ac53d016a1594dba86c6642babbfd1e
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1816865
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added GPIOs pin config to support VCONN on tglrvp. Also added
power switch function to enable/disable VCONN according to the
cc lines.
BRANCH=None
BUG=b:139763031
TEST=Able to get characteristics of an E-marked cable
Change-Id: Ib09307aafe68ea955f256d3f35670579072c3040
Signed-off-by: Ayushee <ayushee.shah@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1762591
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Opt for 7bit slave addresses in EC code. If 8bit is
expected by a driver, make it local and show this in
the naming.
Use __7b, __7bf and __8b as name extensions for i2c/spi
addresses used in the EC codebase. __7b indicates a
7bit address by itself. __7bf indicates a 7bit address
with optional flags attached. __8b indicates a 8bit
address by itself.
Allow space for 10bit addresses, even though this is
not currently being used by any of our attached
devices.
These extensions are for verification purposes only and
will be removed in the last pass of this ticket. I want
to make sure the variable names reflect the type to help
eliminate future 7/8/7-flags confusion.
BUG=chromium:971296
BRANCH=none
TEST=make buildall -j
Change-Id: I2fc3d1b52ce76184492b2aaff3060f486ca45f45
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1699893
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently chipset specific power signals are defined at board/baseboard
level. These power signals are moved to chipset specific file to minimize
the redundant power signals array defined for each board/baseboard.
BUG=b:134079574
BRANCH=none
TEST=make buildall -j
Change-Id: I351904f7cd2e0f27844c0711beb118d390219581
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1636837
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, tcpc_config assumes TCPCs are on I2C bus. ITE's EC has an
embedded TCPC.
This patch adds bus_type field to struct tcpc_config_t so that a TCPC
location on other type of bus can be specified.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Ieac733011700b351e6323f46070dcf46d9e1154b
Reviewed-on: https://chromium-review.googlesource.com/1640305
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The exact same 2 lookup tables are in multiple board files. We seem to
reuse the 2 thermistor circuit enough that we should single source them
in a common location.
BRANCH=none
BUG=none
TEST=yorp sensors still function properly
Change-Id: Ic393c609c78c8a51c55a67b639c1fb9e6c387d8a
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1100943
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In rare cases, it is useful to be able to build tests for all boards:
buildall only builds the main image, but -paladin builders also builds
test cases for each board.
Also remove/fix tests for boards that currently fail.
BRANCH=none
BUG=b:35647963
TEST=make buildalltests -j, wait a long time, tests pass.
Change-Id: Id6d978705a40a2045731cb08ad2ca5d62cc12ebb
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1072218
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change updates all APL/GLK boards to use
chipset_pre_init_callback instead of hook.
BUG=b:78259506
BRANCH=None
TEST=Verified that yorp still boots.
Change-Id: I71ab0f1111e89a254db83fc58abfdfe8eacd3575
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1018734
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With this change, we don't need to declare pnpcfg_settings[]
for each it83xx based board.
BUG=b:76022972
BRANCH=none
TEST=make buildall -j, boot to kernel on reef_it8320.
Change-Id: I39eb465ba7d6191dce4ab1a39787a2c925ec3b91
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/1009544
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
IT8320 can support extra four ADC channels (ADC13-16).
BRANCH=none
BUG=none
TEST=Run console command 'adc' and check the results.
Change-Id: Ia9a259f54fa28d43dc0050c6e20885c0b3914f9c
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/808125
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Nearly every board had a buttons array defined in which its contents had
the standard volume buttons. This commit creates a single common
buttons array that can contain the standard volume buttons and recovery
buttons. If a board has volume up and down buttons, they can simply
define CONFIG_VOLUME_BUTTONS and it will populate the buttons array with
the standard definition. The buttons are active low and have a 30 ms
debounce period. Similiarly, if a board has a dedicated recovery
button, defining CONFIG_DEDICATED_RECOVERY_BUTTON will also populate the
buttons array with a recovery button.
BUG=chromium:783371
BRANCH=None
TEST=make -j buildall.
TEST=Flash a device with CONFIG_VOLUME_BUTTONS, verify pressing volume
buttons still work.
Change-Id: Ie5d63670ca4c6b146ec8ffb64d40ea9ce437b913
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/773794
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The bd9995x driver was written to allow any PD port # to be VBUS or VCC,
but the mapping is broken in a few places. Since all boards use VBUS =
port 0, remove the conversion entirely.
BUG=chromium:781849
BRANCH=kevin
TEST=Verify PD and BC1.2 charging still works on kevin.
Change-Id: I3687866835d1684342d9f746d91b3a6079ab5cc4
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/755000
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Charge port / current selection often needs to be significantly altered
when a battery cannot provide sufficient charge, so have charge_manager
initially enter safe mode. After a battery with sufficient capacity has
been identified, charge manager will leave safe mode, and port / current
selection will return to standard rules.
BUG=chromium:777596
BRANCH=None
TEST=Pass charge_manager unit tests. On kevin, remove battery, attach
Apple PD charger, verify safe mode is not exited and device does not
brown out. Hot-plug battery and verify safe mode is exited. Next,
remove battery, attach to Samus, verify safe mode is not exited and
device doesn't brown out. Hot-plug battery, verify that safe mode is
exited and no active charge port, due to dual-role exclusion.
Change-Id: I7784865750087a037aad8dbbac058b22c77ba6d4
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/733954
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most boards had an identical implementation for this function,
previously known as board_is_consuming_full_charge(). To reduce copy
paste, let's just move it to common code. Boards that charge ramp
without a battery will have to define their own implementation, but
there probably won't be any boards like that in the near future.
BUG=None
BRANCH=None
TEST=make -j buildall
Change-Id: Ic99a378ac26dfd35d7d718bf9376eacfa8609166
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/748919
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The decision on whether to ramp (and how high) depends on the quirks of
charger identification, so move the decision out of board, into the
drivers that implement usb_charger.
Also, rename CONFIG_CHARGE_RAMP to CONFIG_CHARGE_RAMP_SW, to better
contrast with the existing CONFIG_CHARGE_RAMP_HW.
BUG=None
TEST=Manual on kevin, verify ramp occurs when port plugged into Z840
workstation.
BRANCH=None
Change-Id: I5b395274133837a18a4f4ac34b59b623287be175
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/702681
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Runtime S0ix results in SLP_S0 signal being toggled continuously
resulting in an interrupt storm on the EC. In order to avoid this,
enable SLP_S0 power signal only when host indicates intent to enter
S0ix and disable when host exits from S0ix.
BUG=b:65421825
BRANCH=None
TEST=Verified that runtime S0ix no longer results in interrupt storm
on EC. Normal S0ix works fine on soraka. Verified state of SLP_S0
using powerindebug.
Change-Id: I9ca62b8122afd8acedc2c353106407fdcc284925
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/679982
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace structure member "level" in power_signal_info with "flags".
"level" has been used on all boards to indicate active-high or
active-low levels. Addition of "flags" allows easy extension of
power_signal_info structure to define various flags that might be
applicable to power signals (e.g. "level"). Going forward, additional
flag will be added in follow-up CLs.
Also, provide a helper function power_signal_is_asserted that checks
the actual level of a signal and compares it to the flags level to
identify if a power signal is asserted.
BUG=b:65421825
BRANCH=None
TEST=make -j buildall
Change-Id: Iacaabd1185b347c17b5159f05520731505b824b8
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/679979
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We need to response EC ACPI device orientation command or
keyboard/trackpad didn't work on OS image version R58 and
after.
BRANCH=none
BUG=none
TEST=keyboard and trackpad work on R58 and after.
Change-Id: I49f9c90e73a5e529eb228169e4148f4dcd4a45e6
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/689715
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SYSTEM_IMAGE_RW_B hasn't been globally treated as a RW copy.
This change makes EC treat it also as a RW copy.
BUG=none
BRANCH=none
TEST=make buildall
Change-Id: Iae5a9090cdf30f980014daca44cdf8f2a65ea1f2
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/656337
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Merge PS8743 & PS8740 as PS874X as both the drivers are almost same.
BUG=b:64598680
BRANCH=glkrvp
TEST=make buildall -j
On GLKRVP, verify mux setting is correct with
Apple dongle (VGA + USB) and Pluggable adapter.
Change-Id: Ic6d31979936ee213b07c4c71859809102ee91452
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/612209
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
EC currently uses a host command from kernel to enter s0ix.
This patch waits for the SLP_S0 interrupt to come after receiving
the host command before entering S0ix.
On the exit path, the SLP_S0 interrupt directly triggers the
exit rather than waiting for the host command.
BRANCH=none
BUG=b:37443151
TEST=check in EC logs for SLP_S0 entry and powerindebug output,
check suspend_stress_test on reef and soraka works fine,
make -j8 buildall runs fine
Change-Id: Ie5507b7a1e723532f07bc0671c2abd364f6224a2
Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/513705
Commit-Ready: Jenny Tc <jenny.tc@intel.com>
Tested-by: Jenny Tc <jenny.tc@intel.com>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change is based on reef's board code and modified for it8320.
BUG=none
BRANCH=none
TEST=Run the entire faft_ec suite and passed.
Change-Id: I8977d7431eb0a97ceb4ee1dfd11a2c4433687db0
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/487792
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
copy board/reef and modified for 'pre-upload.py'.
BRANCH=none
BUG=none
TEST=build all.
Change-Id: I76618610f443c7d4bb1b7b507c71f3d74d639667
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/501607
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|