| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Certain SKUs of certain boards have lesser number of USB PD ports than
defined by CONFIG_USB_PD_PORT_COUNT. Hence rename
CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNT.
BUG=b:140816510, b:143196487
BRANCH=octopus
TEST=make -j buildall; Boot to ChromeOS
Change-Id: I7c33b27150730a1a3b5813b7b4a72fd24ab73c6a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1879337
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this changes the declaration and definitions of
typec_set_source_current_limit() to take an enum tcpc_rp_value instead
of int.
BRANCH=none
BUG=none
TEST=buildall passes
Change-Id: If633641a581eeb6085b94bc727e23fb57f7cd435
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1889117
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For all boards that defined CONFIG_CHARGER, CONFIG_CHARGER_V2 is also
defined. Remove references to CONFIG_CHARGER_V2 from board header files.
Replace CONFIG_CHARGER_V2 in common C modules with CONFIG_CHARGER when
appropriate.
BUG=b:139699769
BRANCH=none
TEST=make buildall -j
Change-Id: I6b54baf4ad2406bbed629b6b272dad9ea6a81280
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1789420
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change allows us to use the IS_ENABLED condition to replace
the various ifdef guards around the CONFIG_ACCEL_FIFO
BUG=b:137758297,chromium:981990
BRANCH=None
TEST=buildall and CTS tests on Arcada
Change-Id: I65d36bac19855e51c830a33e6f3812575e8d15d9
Signed-off-by: Yuval Peress <peress@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1704164
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The extentions were added to make the compiler perform most
of the verification that the conversion was being done correctly
to remove 8bit addressing as the standard I2C/SPI address type.
Now that the compiler has verified the code, the extra
extentions are being removed
BUG=chromium:971296
BRANCH=none
TEST=make buildall -j
TEST=verify sensor functionality on arcada_ish
Change-Id: I36894f8bb9daefb5b31b5e91577708f6f9af2a4f
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1704792
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Opt for 7bit slave addresses in EC code. If 8bit is
expected by a driver, make it local and show this in
the naming.
Use __7b, __7bf and __8b as name extensions for i2c/spi
addresses used in the EC codebase. __7b indicates a
7bit address by itself. __7bf indicates a 7bit address
with optional flags attached. __8b indicates a 8bit
address by itself.
Allow space for 10bit addresses, even though this is
not currently being used by any of our attached
devices.
These extensions are for verification purposes only and
will be removed in the last pass of this ticket. I want
to make sure the variable names reflect the type to help
eliminate future 7/8/7-flags confusion.
BUG=chromium:971296
BRANCH=none
TEST=make buildall -j
Change-Id: I2fc3d1b52ce76184492b2aaff3060f486ca45f45
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1699893
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ran the following command:
git grep -l 'Copyright (c)' | \
xargs sed -i 's/Copyright (c)/Copyright/g'
BRANCH=none
BUG=none
TEST=make buildall -j
Change-Id: I6cc4a0f7e8b30d5b5f97d53c031c299f3e164ca7
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1663262
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently chipset specific power signals are defined at board/baseboard
level. These power signals are moved to chipset specific file to minimize
the redundant power signals array defined for each board/baseboard.
BUG=b:134079574
BRANCH=none
TEST=make buildall -j
Change-Id: I351904f7cd2e0f27844c0711beb118d390219581
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1636837
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, tcpc_config assumes TCPCs are on I2C bus. ITE's EC has an
embedded TCPC.
This patch adds bus_type field to struct tcpc_config_t so that a TCPC
location on other type of bus can be specified.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Ieac733011700b351e6323f46070dcf46d9e1154b
Reviewed-on: https://chromium-review.googlesource.com/1640305
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This changes requires all boards to define the maximum number
of sensors they support. This will allow us to later create
static arrays with the appropriate length.
BUG=chromium:966506
BRANCH=None
TEST=make buildall
Change-Id: I5a2fa8f0fdcaef69065dfd4c2bfea4e3f371e986
Signed-off-by: Yuval Peress <peress@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1637414
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
tcpc_config contained a field for both the alert polarity and open
drain/push pull configuration. There is also a possible difference in TCPC
reset polarity. Instead of adding yet another field to describe this
configuration, it would be better to convert alert polairty, open
drain and reset polarity into a single flags field.
This CL modifies the tcpc_config struct to use a single flags field
and adds defines for what existing flag options can be.
BUG=b:130194031
BRANCH=none
TEST=make -j buildall
Change-Id: Ifb7e7604edb7021fb2d36ee279049eb52fefc99e
Signed-off-by: Scott Collyer <scollyer@google.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1551581
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's simply a bad idea to describe a macro in multiple locations.
It'll make it hard to change. It'll be difficult to keep all
locations in sync.
This patch replaces the comment duplicated in all ec.tasklist with
a pointer to the CONFIG_TASK_LIST definition. The macro will be
described in a single place (just like all/most other macros).
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Id658b9d68e742e4334c692b804d9c98c8de21313
Reviewed-on: https://chromium-review.googlesource.com/1551579
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mechanical replacement of bit operation where operand is a constant.
More bit operation exist, but prone to errors.
Reveal a bug in npcx:
chip/npcx/system-npcx7.c:114:54: error: conversion from 'long unsigned int' to 'uint8_t' {aka 'volatile unsigned char'} changes value from '16777215' to '255' [-Werror=overflow]
BUG=None
BRANCH=None
TEST=None
Change-Id: I006614026143fa180702ac0d1cc2ceb1b3c6eeb0
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1518660
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Requested for linux integration, use BIT instead of 1 <<
First step replace bit operation with operand containing only digits.
Fix an error in motion_lid try to set bit 31 of a signed integer.
BUG=None
BRANCH=None
TEST=compile
Change-Id: Ie843611f2f68e241f0f40d4067f7ade726951d29
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1518659
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Define macros to define custom events used by sensor interrupt handlers.
Remove CONFIG_ for activity events.
BUG=none
BRANCH=none
TEST=compile, sensors work on eve.
Change-Id: I08ef6ed2a004466ebc5f7650d6952a150b9de713
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1272189
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add all possible supported or soon-to-be supported configuration of
magnetometer behind accelerometers.
Use a more generic variable to indicate the i2c address of the secondary
device.
BUG=b:110143516,b:115587004
BRANCH=none
TEST=compile
Change-Id: Ic00c413f2ec5fa0e6bf1c98861daa02f00769a65
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1361989
Commit-Ready: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Tested-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
board_is_ramp_allowed is replaced by chg_ramp_allowed and
no longer called.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=none
BRANCH=none
TEST=buildall
Change-Id: Iedf760567b4034ce7317a0d2479eb7ee937b4680
Reviewed-on: https://chromium-review.googlesource.com/1377342
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This should be the last step to make all boards on ToT follow
go/usb-pd-slow-response-time. Theses boards all have the higher priority
tasks, but they aren't being used since the tcpc interrupt wasn't
scheduling calls on it.
BRANCH=none
BUG=b:112088135
TEST=builds
Change-Id: I2c39e661e804f88edd5b34636b93e6e63a5af57f
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1283452
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_DPTF_DEVICE_ORIENTATION was added to indicate mode change to
the host to allow it to read the tablet mode flag from shared EC
memory and select the right DPTF table to load (if supported).
However, this config seems unnecessary because of the following
reasons:
1. Host sets SCI mask to indicate to the EC which events it wants to
process. Thus, even if the EC sets mode change flag, it will not be
notified to the host unless it supports mode change event.
2. Additionally, if host supports mode change event, but does not
support multiple DPTF tables, then EC ACPI code takes care of ensuring
that there is a thermal event handler present to reload tables.
3. CONFIG_DPTF_DEVICE_ORIENTATION was defined for almost all new x86
boards.
BUG=b:117844490
BRANCH=None
TEST=make -j buildall
Change-Id: Ic4097ae047e2d559673a321da4df86514f902993
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1292359
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We do not need to set the port_addr variable most places because the
SS-MUX is also the TCPC and the tcpc_config_t information is used
instead.
Remove unused variable setting to avoid confusion.
BRANCH=none
BUG=none
TEST=buildall. phaser USB-C communication (and muxs) still work which is
a nominal case for all of these changes.
Change-Id: I72ee5da251956eb133091974e8dce5ac7f8787c6
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1200064
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To all boards that have space, add the PD tasks that handle interrupts
in parallel. This is the last change for go/usb-pd-slow-response-time.
BRANCH=none
BUG=b:112088135
TEST=buildall. This works on grunt and octopus. This CL is more of a
clean up for ToT to ensure that newly copied boards use the correct
paradigm.
Below is the space taken up by this change:
build/atlas/RW/space_free_flash shrank by 212 bytes: (64796 to 64584)
build/atlas/RW/space_free_ram shrank by 1408 bytes: (33568 to 32160)
build/cheza/RW/space_free_flash shrank by 200 bytes: (205716 to 205516)
build/cheza/RW/space_free_ram shrank by 1408 bytes: (38208 to 36800)
build/coral/RW/space_free_flash shrank by 212 bytes: (87980 to 87768)
build/coral/RW/space_free_ram shrank by 1400 bytes: (2564 to 1164)
build/dragonegg/RW/space_free_flash shrank by 276 bytes: (142136 to 141860)
build/dragonegg/RW/space_free_ram shrank by 1640 bytes: (24704 to 23064)
build/elm/RW/space_free_flash shrank by 204 bytes: (24644 to 24440)
build/elm/RW/space_free_ram shrank by 528 bytes: (8972 to 8444)
build/eve/RW/space_free_flash shrank by 216 bytes: (83748 to 83532)
build/eve/RW/space_free_ram shrank by 1408 bytes: (1824 to 416)
build/fizz/RW/space_free_flash shrank by 184 bytes: (17576 to 17392)
build/fizz/RW/space_free_ram shrank by 736 bytes: (11648 to 10912)
build/glkrvp/RW/space_free_flash shrank by 248 bytes: (92432 to 92184)
build/glkrvp/RW/space_free_ram shrank by 1408 bytes: (45088 to 43680)
build/kukui/RW/space_free_flash shrank by 160 bytes: (32364 to 32204)
build/kukui/RW/space_free_ram shrank by 520 bytes: (11260 to 10740)
build/meowth/RW/space_free_flash shrank by 240 bytes: (72232 to 71992)
build/meowth/RW/space_free_ram shrank by 1408 bytes: (34496 to 33088)
build/nami/RW/space_free_flash shrank by 360 bytes: (82016 to 81656)
build/nami/RW/space_free_ram shrank by 1408 bytes: (2656 to 1248)
build/nocturne/RW/space_free_flash shrank by 216 bytes: (62756 to 62540)
build/nocturne/RW/space_free_ram shrank by 1408 bytes: (34368 to 32960)
build/rainier/RW/space_free_flash shrank by 180 bytes: (45468 to 45288)
build/rainier/RW/space_free_ram shrank by 528 bytes: (13516 to 12988)
build/rammus/RW/space_free_flash shrank by 200 bytes: (91284 to 91084)
build/rammus/RW/space_free_ram shrank by 1408 bytes: (1920 to 512)
build/reef_mchp/RW/space_free_flash shrank by 212 bytes: (51048 to 50836)
build/reef_mchp/RW/space_free_ram shrank by 2120 bytes: (27420 to 25300)
build/reef/RW/space_free_flash shrank by 224 bytes: (84564 to 84340)
build/reef/RW/space_free_ram shrank by 1408 bytes: (2208 to 800)
build/rowan/RW/space_free_flash shrank by 204 bytes: (29668 to 29464)
build/rowan/RW/space_free_ram shrank by 528 bytes: (9300 to 8772)
build/scarlet/RW/space_free_flash shrank by 156 bytes: (29464 to 29308)
build/scarlet/RW/space_free_ram shrank by 520 bytes: (11100 to 10580)
build/zoombini/RW/space_free_flash shrank by 276 bytes: (66816 to 66540)
build/zoombini/RW/space_free_ram shrank by 2112 bytes: (37376 to 35264)
Compared 208 of 208 files.
38 files changed.
Total size change: -27484 bytes.
Average size change: -723 bytes.
Change-Id: Ifbea67ee4d460fb197a1601d0951169f2f2b5b3b
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1220667
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Naming of many vector types and matrix types are not clear enough.
For example, we have:
vector_3_t, which is a vector of three int.
vec3_t, which is a vector of three float.
size4_t, which is a vector of four size_t.
mat33_t, which is a 3x3 matrix of float.
matrix_3x3_t, which is a 3x3 matrix of fixed point.
Besides, we have types like int8_t, uint16_t types.
To clearly distinguished types, the CL propose to,
For vector types, naming should be `$type + 'v' + $num + '_t'`:
vector_3_t becomes intv3_t
vec3_t becomes floatv3_t
vector 4 of uint16_t becomes uint16v4_t (which doesn't exist yet)
For matrix types, naming should be `mat$N$N_` + $type + '_t', where $N is the
matrix size:
matrix_3x3_t becomes mat33_fp_t # fp: fixed point
mat33_t becomes mat33_float_t
TEST=make buildall -j
BUG=b:114662791
Change-Id: I51d88d44252184e4b7b3564236833b0b892edc39
Signed-off-by: Yilun Lin <yllin@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1215449
Commit-Ready: Yilun Lin <yllin@chromium.org>
Tested-by: Yilun Lin <yllin@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This converts the compile time option of
CONFIG_USB_PD_TCPM_TCPCI_MUX_ONLY into a runtime option to better
support draggon egg designs and reduce CONFIG complexity in general.
Introduce new mux_read/write to read from tcpc_config_t or mux driver
depending on new flag setting.
Audited all mux drivers for any use of tcpc_read/write and updated to
mux_read/write.
BRANCH=none
BUG=b:110937880
TEST=On Bip with CL stack:
Verified by connecting DP monitor at boot;
Verified plug / unplug of DP cable works;
Change-Id: I968893b886ff0ccc4074beae5ec42973814ae77c
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1200062
Commit-Ready: Gaggery Tsai <gaggery.tsai@intel.corp-partner.google.com>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds support to configure dualrole setting
per port, so that servo v4 can adjust charge and
dut port separately.
servo will detect charge capability on CHG port
and choose source or sink as appropriate.
Fix null dereference bug in genvif duel to dynamic src_pdo.
"cc" command allows src, snk, srcdts, snkdts configurations.
BRANCH=None
BUG=b:72557427
TEST=charge through and also passive hub. Note Dru doesn't accept DTS hub.
TEST=make buildall -j
Change-Id: I19f1d1a5c37647fec72202191faa4821c06fb460
Signed-off-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1096654
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make it more generic, to support other magnetometer.
BUG=b:110143516
BRANCH=none
TEST=Compile
Change-Id: I94cbbe6daf598680a2decde12d703650dfb7c04c
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1101548
|
|
Create a new board reef_mchp based on production reef board
with original EC replaced with MEC1701 on interposer board.
BRANCH=none
BUG=none
TEST=Build and flash into board. Requires CoreBoot and
ChromiumOS rebuilt with cros_mec USE flag.
Change-Id: Ib93063586ca3b71f98d19c91d974138f880e5fd0
Signed-off-by: scott worley <scott.worley@microchip.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/1054729
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|