summaryrefslogtreecommitdiff
path: root/board/servo_v4
Commit message (Expand)AuthorAgeFilesLines
* Revert "servo_v4: Enable VBUS voltage and current measurement"Wai-Hong Tam2019-06-012-6/+0
* servo_v4: Enable VBUS voltage and current measurementWai-Hong Tam2019-05-202-0/+6
* servo_v4: Disable syslock and flash commandsWai-Hong Tam2019-05-201-0/+2
* servo_v4: Disable unused features to reduce spaceWai-Hong Tam2019-05-201-0/+3
* servo_v4: fix in displaying CCD polarityNamyoon Woo2019-05-171-1/+1
* servo_v4: Remove console command history.Aseda Aboagye2019-05-171-0/+1
* servo_v4: disable PD entirely when in SNK.Nick Sanders2019-04-101-4/+9
* ec.tasklist: Consolidate duplicate commentsDaisuke Nojiri2019-04-081-11/+1
* servo_v4: detect SBU more reliablyNick Sanders2019-03-281-104/+93
* common: bit change 1 << constants with BIT(constants)Gwendal Grignou2019-03-261-2/+2
* common: replace 1 << digits, with BIT(digits)Gwendal Grignou2019-03-262-10/+10
* Revert "Servo v4: reduce RO flash size"Todd Broch2019-03-062-8/+2
* core/cortex-m*: always use coreboot-sdkPatrick Georgi2019-02-191-5/+0
* servo_v4: Remove console commands to save flash spaceDaisuke Nojiri2019-02-191-0/+4
* Servo v4: reduce RO flash sizeDiana Z2018-11-202-2/+8
* servo_v4: update board_select_rp_valueNick Sanders2018-09-271-2/+24
* servo_v4: clear bbram PD state on rebootNick Sanders2018-08-251-0/+6
* build.mk: specify corebook_sdk by CROSS_COMPILE_corebook_sdk_*Wei-Han Chen2018-08-221-1/+4
* Revert "**/build.mk: Set CROSS_COMPILE* to point to coreboot-sdk"Wei-Han Chen2018-08-171-0/+2
* servo_v4: add per port dualrole settingNick Sanders2018-08-152-62/+150
* **/build.mk: Set CROSS_COMPILE* to point to coreboot-sdkPatrick Georgi2018-08-151-2/+0
* servo_v4: use coreboot toolchainNick Sanders2018-06-051-0/+2
* test/build.mk: Allow boards to specify test listsNicolas Boichat2018-05-281-0/+3
* servo_v4: add more stack for PDNick Sanders2018-05-141-1/+1
* servo_v4: Remove `crash` command.Aseda Aboagye2018-04-251-0/+1
* system: update board version to return an error if encounteredJett Rink2018-04-191-2/+1
* servo_v4: extend pd task stackNick Sanders2018-04-021-1/+1
* usbc: add config support for multiple (and no) vbus adc channelsJett Rink2018-03-091-2/+2
* usb_i2c: Remove usb_i2c_board_enable/disableNicolas Boichat2017-11-201-2/+1
* servo_v4: disable USB3 interfaceNick Sanders2017-11-161-2/+5
* servo_v4: remove gpio endpoint.Nick Sanders2017-11-042-58/+4
* charge_manager: Enter safe mode at bootShawn Nematbakhsh2017-11-021-0/+1
* servo_v4: Fix buffer overflowShawn Nematbakhsh2017-11-021-7/+3
* servo_v4: fix board version GPIO accessNick Sanders2017-11-022-15/+26
* servo_v4: Advertise multiple >5V PDOs to DUTShawn Nematbakhsh2017-10-241-29/+47
* servo_v4: Add CHG / DUT port voltage synchronizationShawn Nematbakhsh2017-10-192-57/+112
* pd: Remove ACCESSORY statesShawn Nematbakhsh2017-10-193-5/+15
* pd: Add "freeze" dual-role policyShawn Nematbakhsh2017-10-191-0/+4
* servo_v4: Use charge_manager for input port / ILIM selectionShawn Nematbakhsh2017-10-192-43/+28
* chip/stm32/usart: Add flags to usart_configNicolas Boichat2017-10-181-0/+2
* servo_v4: add pd commandsNick Sanders2017-09-281-0/+1
* servo_v4: Add a CCD 'keepalive' console command.Aseda Aboagye2017-09-061-3/+73
* servo_v4: Tie data role preference to DTS mode settingScott Collyer2017-08-151-1/+2
* charge_manager: Consider port in source PDO.Aseda Aboagye2017-08-111-1/+1
* usb_i2c: Fail if board I2C bridge is disabledRandall Spangler2017-07-311-0/+1
* servo_v4: enable usb port by defaultNick Sanders2017-06-081-0/+12
* servo_v4: Added support for HW board ID and limit on VBUS voltageScott Collyer2017-05-182-0/+56
* common/update_fw: Remove board-specific rw_sectionsNicolas Boichat2017-04-151-20/+0
* servo_v4: Added dts_mode on/off control for DUT port connectionScott2017-04-073-70/+201
* servo_v4: Don't disable SBU mux when TypeC detach occursScott2017-04-041-12/+12
View Lorry Controller Status