| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable CONFIG_ASSERT_CCD_MODE_ON_DTS_CONNECT on all dedede boards. This
will assert GPIO_CCD_MODE_ODL when a debug device is connected to a CCD
port. GPIO_CCD_MODE_ODL must be configured as an open drain so EC and
Cr50 don't drive fight.
BUG=b:190189242
TEST=Build dedede
BRANCH=None
Change-Id: I2d71312967f2d4a693ac9753279f49478e8c092c
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2976759
Reviewed-by: Diana Z <dzigterman@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch removes the TCPC dump console command to create ROM space.
BUG=None
BRANCH=None
TEST=make BOARD=waddledoo
Change-Id: I85d3c652b8ffb2fe15cd4d9e12bcb38f030caae5
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2986847
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the previous change to disable the ASGATE from the charger side,
this actually ended up breaking sourcing VBUS.
This commit enables the ASGATE when we are attempting to source VBUS.
BUG=b:183220414
BRANCH=dedede
TEST=Build and flash madoo, plug in a Type-C sink, verify that VBUS is
sourced.
TEST=Verify that DUT can PR_Swap with peripheral.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I1938f2b827e57a04ef72e2ad35ad6ff29ce18712
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2795073
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a reland of f7fbc629f0655229cc7ffdadfb18c9e13118e3d2
Original change's description:
> dedede/raa489000: Disable ASGATE from READY state
>
> On the boards which use the RAA489000, we keep the ADC enabled while
> giving VBUS control to the charger side. This can cause a situation
> where VBUS is not quite zero volts when a charger is removed. This
> commit uses the charger side registers to control the ASGATE when
> selecting our active charge port. This is done in addition to the
> existing implementation which uses the TCPCI registers to control
> ASGATE. When we place the parts into low power mode, we move the VBUS
> control from the TCPC side of the IC to the charger side. It should
> be safe to issue both commands as if the TCPC side has control, the IC
> ignores the setting from the charger side registers.
>
> BUG=b:183220414
> BRANCH=dedede
> TEST=Build and flash madoo, plug in charger to port, unplug, verify
> that VBUS falls to < 200mV and decays from there.
>
> Signed-off-by: Aseda Aboagye <aaboagye@google.com>
> Change-Id: I8e8c8cc32575d18c9d3d1210ed3c5cf69ad5ca4b
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2793058
> Tested-by: Aseda Aboagye <aaboagye@chromium.org>
> Reviewed-by: Diana Z <dzigterman@chromium.org>
> Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Bug: b:183220414
Change-Id: I36db53f3e13ba848308cd7e0c94a1b5a3551c600
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2797549
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This function prototype is defined in lots of files, none of which is
visible to Zephyr.
Add a prototype in one place and remove the others.
BUG=b:183296099
BRANCH=none
TEST=make buildall
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ia324327a69b117483ab9ee5c85eba93c0fb5ad9c
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2789799
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit f7fbc629f0655229cc7ffdadfb18c9e13118e3d2.
Reason for revert: Breaks sourcing of VBUS.
Original change's description:
> dedede/raa489000: Disable ASGATE from READY state
>
> On the boards which use the RAA489000, we keep the ADC enabled while
> giving VBUS control to the charger side. This can cause a situation
> where VBUS is not quite zero volts when a charger is removed. This
> commit uses the charger side registers to control the ASGATE when
> selecting our active charge port. This is done in addition to the
> existing implementation which uses the TCPCI registers to control
> ASGATE. When we place the parts into low power mode, we move the VBUS
> control from the TCPC side of the IC to the charger side. It should
> be safe to issue both commands as if the TCPC side has control, the IC
> ignores the setting from the charger side registers.
>
> BUG=b:183220414
> BRANCH=dedede
> TEST=Build and flash madoo, plug in charger to port, unplug, verify
> that VBUS falls to < 200mV and decays from there.
>
> Signed-off-by: Aseda Aboagye <aaboagye@google.com>
> Change-Id: I8e8c8cc32575d18c9d3d1210ed3c5cf69ad5ca4b
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2793058
> Tested-by: Aseda Aboagye <aaboagye@chromium.org>
> Reviewed-by: Diana Z <dzigterman@chromium.org>
> Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Bug: b:183220414
Change-Id: Ibf6c161adca9981a065e969b6c3b73dd408ef1ba
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2796411
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On the boards which use the RAA489000, we keep the ADC enabled while
giving VBUS control to the charger side. This can cause a situation
where VBUS is not quite zero volts when a charger is removed. This
commit uses the charger side registers to control the ASGATE when
selecting our active charge port. This is done in addition to the
existing implementation which uses the TCPCI registers to control
ASGATE. When we place the parts into low power mode, we move the VBUS
control from the TCPC side of the IC to the charger side. It should
be safe to issue both commands as if the TCPC side has control, the IC
ignores the setting from the charger side registers.
BUG=b:183220414
BRANCH=dedede
TEST=Build and flash madoo, plug in charger to port, unplug, verify
that VBUS falls to < 200mV and decays from there.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I8e8c8cc32575d18c9d3d1210ed3c5cf69ad5ca4b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2793058
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use board-specific override files when generating VIFs for boards.
BUG=b:172276715
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: I197365018ceb8197c22d631cebf4cbce1c0119f7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2785506
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For some reason, when the RAA489000 TCPC exits low power mode, CC
status doesn't appear changed when using a servo v4. This causes us
to think no connection is present and immediately but the IC back into
low power mode. If we wait 100ms before querying the CC status reg,
it seems that then the right values are reported.
This commit adds a workaround by setting the LPM exit debounce time to
100ms.
BUG=b:182429150,b:181308089
BRANCH=dedede
TEST=Build and flash a board, verify that servo v4 with an external
charger is detected.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: Ic0c2406fa20d0dad82adee865cd87c46d7126b9f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2752250
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Thus far, it seems that boards that use the same OCPC PID constants
behave similarly. Therefore, this commit updates the constants that
were most recently used on madoo to the other OCPC boards that use the
same charger IC such that the behaviour meets the criteria at
go/ocpc-testing.
- Converges around the target current.
- Average steady state error is less than 4% of target.
- Current is reduced to target level in less than 5s when load is
suddenly released.
BUG=None
BRANCH=dedede
TEST=Build and flash magolor. Verify that battery can charge to 100%.
Verify that it meets or exceeds the constraints above.
TEST=Verify that DUT can come out of battery cutoff from sub board.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I206854c097c307b941a64547f9b74c8259a7d499
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2691585
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Boards using the RAA489000 TCPC should set output current on their ports
through the TCPC driver. This commit adds a board function to do this
for every dedede board currently using the RAA489000.
BRANCH=None
BUG=b:178064507
TEST=on madoo, verify OCP occurs if more than 1.5A is drawn on a non-PD
port, verify register is set to allow 3.0A for port partners requesting
that current in their sink capabilities
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ieb7df916c122d5de1adaa7371a58ad5cf2954ee4
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2658377
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CtsSensorTestCases is failing on Drawcia because it requests 100
events from accelerometer and gyroscope but gets zero. We can
read sensor events just fine, but they never seem to push to the
kernel. Add CONFIG_MKBP_EVENT into the baseboard, and then clean up
all the one-off variants that have added this themselves. Also, add
some accel commands specific to drawcia for easier debugging.
BUG=b:171939568
BRANCH=none
TEST=Use amstan's script, which amounts to cat /dev/iio:deviceN
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: Ia796ec2f9a08d3628dcabb4b5fca425693af4099
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2638636
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Almost every relevant board copy-pastes 5000 us. Make that the default
and get rid of the redundant definitions. This is the approximate result
of this command:
find . -type f -name *.h | xargs sed -i -E \
'/#define CONFIG_USBC_VCONN_SWAP_DELAY_US[[:space:]]+5000[[:space:]]/d'
BUG=b:144165680
TEST=make buildall
BRANCH=none
Change-Id: Ife86f9752971abcd7ab5ad5a5e607eb2ccbde2ba
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2628132
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace PD_VCONN_SWAP_DELAY with CONFIG_USBC_VCONN_SWAP_DELAY_US. This
is the approximate result of the following command, run from
platform/ec:
find . -type f -\( -name '*.c' -o -name '*.h' -\) | \
xargs sed -iE 's/PD_VCONN_SWAP_DELAY/CONFIG_USBC_VCONN_SWAP_DELAY/g'
Fix some latent formatting errors in usb_pd_protocol.c, because they
were preventing pre-upload hooks from passing.
BUG=b:144165680
TEST=make buildall
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: Icaf3b309c08fdcd162e960cf5dc88185016b5d2d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2628131
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In madoo's design, there is a protection IC between USB
connector and TCPC. When EC is hibernate, the CC lines will
be disconnected, which cause the result that TCPC can't
detect AC power and Chromebook won't wake the system.
Enalbing ADC for all modes by setting 0x4C bit 0 to 1 (to be
more precise is that we don't clear bit 0 during hibernation)
can prevent issue mention above.
BUG=b:174971576
BRANCH=dedede
TEST=flash code and make sure ac in can wake system from hibernation
Signed-off-by: Ko_Ko <Ko_Ko@compal.corp-partner.google.com>
Change-Id: I2a83c69e34cbc4bfdff90d760f32817a7924dc26
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2626803
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Reviewed-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
Tested-by: Ko Ko <ko_ko@compal.corp-partner.google.com>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Early versions of waddledoo had to have their 5V GPIO remapped between
versions. As variants of waddledoo are created, they end up copying
the same code which is not applicable to their board.
This commit restricts the remap to the waddledoo board only.
BUG=None
BRANCH=dedede
TEST=Copy code to a waddledoo variant, verify that board builds and 5V
still works.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I6de5ffc9bf7eb5d35f5778cc2c798519af3b18c9
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2625794
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After a sysjump, it could be possible that the Type-C interrupt lines
are asserted. This commit simply has the EC check the interrupt lines
after init and handle them if necessary.
BUG=b:143166332
BRANCH=dedede
TEST=`make -j BOARD=waddledoo`
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I16eef9827ca37cec4b04442a50352795b9652592
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2601777
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that the DPM will be handling source-out decisions for TCPMv2,
remove references to its old configuration options from TCPMv2 boards in
order to avoid any confusion as to what code is running now. Also
remove the charge manager notifications of sink attach/detach since the
policy is being centralized into the DPM.
Note that the previous configuration options only ever allocated one 3.0
A port, and so the default number of 3.0 A ports has been set to 1.
BRANCH=None
BUG=b:168862110,b:141690755
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ie452e3da32b04226503539daa67b6b9f4a58aa58
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2597431
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is an option in the task_set_event function which force
the calling task to wait for an event. However, the option is never
used thus remove it.
This also will help in the Zephyr migration process.
BUG=b:172360521
BRANCH=none
TEST=make buildall
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Change-Id: Ic152fd3d6862d487bcc0024c48d136556c0b81bc
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2521599
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Commit-Queue: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Set up checking for interrupt line wedging, which may occur when
interrupts from the charger/TCPC occur with similar timing to the BC 1.2
interrupts.
BRANCH=dedede
BUG=b:143166332
TEST=on waddledoo, test multiple DUT-DUT connections and ensure neither
system wedges its interrupt line low
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Id36de654c6af5c22801e3dee9446e35bf32cf63e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2576452
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Define CONFIG_DEBUG_ASSERT_BRIEF for waddledoo to save flash space.
BRANCH=dedede
BUG=None
TEST=make -j buildall; observe waddledoo is back over 2k free flash
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I90223c6c46067aa23dd9722377cbaf3202a32e52
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2576451
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The RAA48900 charger IC seems to over draw its contract by roughly 4%.
This commit simply modifies our input current limit to account for
that.
BUG=b:147463641
BRANCH=dedede
TEST=Build and flash waddledoo, verify that input current limit is
reduced and is under the contract.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I70ab15ea24d789a7a1696217efae784f537ca014
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2548692
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
VBUS and VCONN transition times were measured therefore this commit is
simply updating these values.
BUG=b:147314141
BRANCH=dedede
TEST=Build and flash waddledoo, verify that PD peripherals still work
ok including power role swaps.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I86654981e0a44345c273efce3d50068d8419432b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2548690
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Waddledoo is almost out of space on ToT, so move the init data region to
free up some flash.
BRANCH=None
BUG=None
TEST=make -j buildall; see that we report 1.6k free flash space for Doo
now
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I9eb713777c9767475933a603dd57e88fa33ea46a
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2540388
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PP5000_U shouldn't be turned off until G3, so if a sysjump occurs during
S5 leave this rail on.
BRANCH=None
BUG=b:166787955,b:167996216
TEST=on drawcia, run full resets with a forced sysjump in S5 and ensure
that the DUT can get to S0 after the reset
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I00fb44903aa109bbc525fb512ab4035a94649c68
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2458841
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove VSYNC sensor, and related GPIOs and configs.
BRANCH=None
BUG=b:169056723
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ib37e648ea04b5da3ed9ce6a660fcd60f2bfe264a
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2424891
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Naming for the C1 interrupt line varies slightly between variants due to
schematic name differences, and version or functional differences. This
change ensures all boards have GPIO_USB_C1_INT_ODL defined for baseboard
code to reference.
BRANCH=None
BUG=b:153684907
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I9303be2f9f142eed249da4f2f5e660985ceb7fdd
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2391213
Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit e834efc7488bc98211084f54fad9da9b584daec1.
Reason for revert: DUT fails to enter G3 state on shutdown
BUG=b:164202851, b:163486924
BRANCH=None
TEST=Verify DUT entering into G3 after shutdown.
Change-Id: I67876ec7ed22526770ac38e261b5b1903bcb6476
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2397934
Tested-by: Sooraj Govindan <sooraj.govindan@intel.corp-partner.google.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use common battery fuel gauge code
BRANCH=none
BUG=b:152067066
TEST=make -j buildall
Signed-off-by: Sam Hurst <shurst@google.com>
Change-Id: I25a97614e6ba5dc601812f59739bd9cb7ce572e3
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2283852
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that the SM5803 has support for discharge on AC, move this
configuration into the baseboard.
BRANCH=None
BUG=b:164256610
TEST=on drawlat with a charger in C0, ensure "ectool chargecontrol
discharge" shows battery discharging and "ectool chargecontrol normal"
shows battery charging again. Repeat on C1
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ib058095330481fc4aa2f1016ccec6c77b047d8f5
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2376467
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds the function to check whether the charge FET (CFET)
is disabled or not for waddledoo and magolor.
BUG=b:160918663
BRANCH=None
TEST=`make -j buildall`
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I843d3a2d25c42d861ac86964a3e0ec8d557d97f6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2370043
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the PWM related defines and arrays into the board level, to allow
customization of what PWM channels boards use (if they choose to use the
PWM at all).
BRANCH=None
BUG=None
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Id417a7be079511c17de9f2e5d03c729467435804
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2358899
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Configure unused GPIOs as inputs to save power in deep sleep states.
BUG=b:162318932
BRANCH=none
TEST=make buildall
TEST=flash waddledoo
put device into S0iX or other low power state
measure system and EC power consumption
Signed-off-by: Brian Nemec <bnemec@chromium.org>
Change-Id: Ie29c15d1c4947fe3d6665c66df476ac6b9ed943d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2358903
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change adds temperature sensors for waddledoo.
BUG=b:163486924
BRANCH=None
TEST=Verify console "temps" can read temperature.
Check ectool tempsinfo all and ectool temps all.
Signed-off-by: Sooraj Govindan <sooraj.govindan@intel.com>
Change-Id: Icce66d8b57af7932a9737d8d74a2d2139ba82371
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2348744
Tested-by: Sooraj Govindan <sooraj.govindan@intel.corp-partner.google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Commit-Queue: Justin TerAvest <teravest@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 27ee378bb78a299a0983379be83eb6d55860b4ae.
Reason for revert: b/162508724
A wake-up source from hibernation needs to be determined only by RO. Reverting back to the original implementation: CL:2236589.
Original change's description:
> power: Clear AP_IDLE when waking up by PB or LID
>
> Currently, AP_IDLE is cleared when EC wakes up by the power button or
> the lid open.
>
> This patch extends the logic from CONFIG_EXTPOWER_GPIO to
> CONFIG_EXTPOWER so that the bug (chromium:1073960) can be also fixed
> on the boards using non-GPIO method for extpower_is_present.
>
> Tested as follows on Trembyle:
> 1. Put DUT in hibernation.
> 2. Wake up DUT and observe:
> a. When waking up by power button, AP is turned on.
> b. When waking up by lid open, AP is turned on.
> c. When waking up by AC, AP is left idle.
>
> BUG=b:157077589, chromium:1073960, b:159350276
> BRANCH=none
> TEST=See above.
>
> Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
> Change-Id: I944aaac036ce58659e81b7021e52a3291f31e951
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2283946
> Reviewed-by: Jett Rink <jettrink@chromium.org>
Bug: b:157077589
Bug: chromium:1073960
Bug: b:159350276
Bug: b:162508724
Change-Id: Iaf9d0af2ca8c48bbf2529c4ba05493837dd76287
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2333106
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Auto-Submit: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This consolidates dedede boards to use a baseboard extpower_is_present()
and also adds the condition to verify that the port is sinking, instead
of providing Vbus. It also converts the RAA489000 boards to use the
cached Vbus presence in pd_snk_is_vbus_provided().
BRANCH=None
BUG=None
TEST=on waddledoo and waddledee, verify "AC on" prints when a charger or
charge-through servo v4 is plugged in, verify no "AC on" prints when a
dongle is plugged in
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I5941da789a4e810f6d8cc40cef4d32a5a03c5662
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2317062
Tested-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When HDMI DB isn't present, the HDMI enable line is the SCL line for DB
i2c and shouldn't be changed.
BRANCH=None
BUG=None
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I0146d31c6a1ae0bacd7475fb923f52ad4ac0764f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2300685
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It will be happy to define LED behavior in boards.
BUG=b:160664441
BRANCH=none
TEST=make buildall -j4
Signed-off-by: xiong.huang <xiong.huang@bitland.corp-partner.google.com>
Change-Id: Ib81fe8d20fa3ab74064958fba3576a1618635e52
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2296544
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Dedede family may have different temp sensors for other ADCs channel.
This patch moves adc channel to board variant.
BUG=none
BRANCH=none
TEST=make buildall -j
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Change-Id: Id34a924fc9431a553a1467068c6ccee6111102bc
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2289478
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sub-board GPIOs are connected to different signals when the HDMI
daughterboard is attached. This change uses the CBI FW_CONFIG field to
determine if the HDMI DB should be present, and re-configures the GPIO
modules and flags accordingly.
This change also switches waddledoo to use the run-time determination
for maximum type-c ports.
BRANCH=None
BUG=b:155963446
TEST=on waddledoo with type-c DB, C1 still works
on waddledoo with HDMI DB and FW_CONFIG set to 0x0003 HDMI plug-ins
are detected and the USB-A port functions
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ie093706e3bf515efa53223aec761714062f2f427
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2274993
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Different DB options may cause different numbers of charger chips to be
present on the system. Remove constant count for charger chips, and
instead always call into the overridable function to query the count.
BRANCH=None
BUG=b:155963446
TEST=make -j buildall
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I0e65b8af351ecabe6f7b823e0e56f1932cc280a6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2277833
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Increase dedede board PD stack sizes to prevent overflow.
BRANCH=none
BUG=b:155813111
TEST=make -j buildall
Signed-off-by: Sam Hurst <shurst@google.com>
Change-Id: I061bf8e53c0f2dfe8ca5617f562bd99ed510d467
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2283693
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use charger/TCPC RAA48900 instead of TCPC IT8320 + charger SM5803
combination at MB side.
BUG=b:157626290, b:158023819
BRANCH=none
TEST=make buildall -j
Signed-off-by: xiong.huang <xiong.huang@bitland.corp-partner.google.com>
Change-Id: Ibb97a41e1d280da7c92cf2c00202b5eb205f99b3
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2239599
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove chips:
Charge chip - SM5803
TCPC and USB mux chip - ANX7447
USB retimer chip - TUSB544
BC1.2 chip - PI3USB9201
BUG=b:157626290, b:158023819
BRANCH=none
TEST=make buildall -j
Signed-off-by: xiong.huang <xiong.huang@bitland.corp-partner.google.com>
Change-Id: Iac30f683774368b2b5706c5f804caf549a54139a
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2235238
Reviewed-by: Diana Z <dzigterman@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit changes the mechanism in which waddledoo checks VBUS
presence. Instead of going out to talk to each TCPC, now waddledoo
will simply use the cached VBUS presence within the TCPCI driver.
This was causing a deadlock leading to watchdog resets when TCPC low
power mode was enabled.
BUG=b:158218613
BRANCH=None
TEST=Enable TCPC low power mode, build and flash waddledoo, verify
that the DUT does not watchdog reset.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: Ifee42979246bb378e9af226123164b10b2df146e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2239483
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit enables OCPC for waddledoo.
BUG=b:148980016
BRANCH=None
TEST=Build and flash on waddledoo, verify that I can charge the
battery from the sub-board at desired current in G3. Additionally,
verify that adapter is nearly maxed out when system is running in S0
and battery is charging heavily.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I5c0732b21760980cc3bb3f4c6006fd57e48cfc21
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2135965
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit enables the PI3USB9201_ALWAYS_POWERED flag for the
PI3USB9201 BC1.2 chip. In these designs, these parts are always
powered so there's no need to explicitly enable a 5V rail. This was
causing Type-A ports to turn on whenever a charger was plugged in.
BUG=b:151688130, b:150814620
BRANCH=None
TEST=Build and flash waddledoo, verify that Type-A ports are not
powered when a charger is plugged in in S5/G3.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: Ic478c59e96854633a34f510e9494b908ab01ed7c
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2219271
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Extend the tcpci register dump command to allow chip specific
register dumps to be displayed.
BUG=b:157206143
TEST=Display ANX3447 registers on Puff.
BRANCH=none
Change-Id: Ib2bf1adcbe3bce75ff54c36c4306b17356eae96f
Signed-off-by: Andrew McRae <amcrae@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2208344
Tested-by: Andrew McRae <amcrae@chromium.org>
Auto-Submit: Andrew McRae <amcrae@chromium.org>
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Andrew McRae <amcrae@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds the needed rotation matrices for the sensors to place
the measurements into the standard reference frame.
BUG=b:155253629
BRANCH=None
TEST=Build and flash waddledoo. Compare accel readings against
released chromebooks and verify that they match in orientation and
sign.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I6d1cb3ed674d71b083eef5e44e972794108701a1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2210826
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Diana Z <dzigterman@chromium.org>
Commit-Queue: Diana Z <dzigterman@chromium.org>
Auto-Submit: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This GPIO will be used to communicate with the cr50 when we
enable EFS2.
BRANCH=None
BUG=b:156785199
TEST=make -j buildall, boots on waddledoo
Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: Ia960e1ad6ddd83338570cae133697ed5d4f61597
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2210864
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|