summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* Clear OWNERS for factory/firmware branchfactory-oak-8182.BBrian Norris2021-09-101-2/+0
* chip: it83xx: disable USB module's clock at defaultDino Li2016-04-111-17/+0
* chell / kunimitsu / lars: Enable CONFIG_USB_PD_COMM_LOCKEDShawn Nematbakhsh2016-04-113-0/+3
* pd: Add config to disable PD communication in locked ROShawn Nematbakhsh2016-04-114-21/+1
* oak: increase HOSTCMD task stack sizeYH Huang2016-04-111-1/+1
* cr50: forward console through USBMary Ruthven2016-04-071-3/+3
* cr50: enable AP and EC UART forwardingMary Ruthven2016-04-072-4/+11
* cr50: export AP and EC UART through USBMary Ruthven2016-04-072-2/+4
* cr50: add support for creating multiple serial endpointsMary Ruthven2016-04-072-1/+2
* chell: increase HOSTCMD task stack sizeVincent Palatin2016-04-061-1/+1
* Cr50: Specify pinmux wake sources in gpio.incBill Richardson2016-04-051-1/+1
* temp sensor: add support for G782Kevin K Wong2016-04-031-5/+5
* charge_manager: Report UNKNOWN USB charger for 2 seconds after changeShawn Nematbakhsh2016-04-039-9/+9
* samus_pd: Use less flash spaceShawn Nematbakhsh2016-04-033-2/+4
* ectool: Support keyboard factory scanningDevn Lu2016-04-012-0/+25
* sensor: update sensor driver to use I2C port from motion_sensor_tKevin K Wong2016-03-318-0/+23
* cr50: enable use of multiple UARTsMary Ruthven2016-03-311-0/+7
* kevin: Add battery and charger supportShawn Nematbakhsh2016-03-317-14/+168
* CR50: add NULL padding support for RSA encrypt/decryptnagendra modadugu2016-03-311-1/+3
* Cr50: Add stubs to support low-power idleBill Richardson2016-03-301-0/+2
* CR50: add support for RSA PKCS1-PSS paddingnagendra modadugu2016-03-301-3/+6
* cr50: update GPIOsMary Ruthven2016-03-291-8/+8
* kevin: Change battery i2c frequency to 100 KHzShawn Nematbakhsh2016-03-291-1/+1
* power: rk3399: Add power down sequencingShawn Nematbakhsh2016-03-291-1/+1
* Cr50: Remove CONFIG_HOSTCMD_SPS supportBill Richardson2016-03-241-2/+1
* oak: allow charging of dead battery requesting nilstabilize-8104.BYH Huang2016-03-231-0/+1
* it83xx: keyboard: remove "CONFIG_IT83XX_KEYBOARD_KSI_WUC_INT" and fix ISRDino Li2016-03-221-1/+0
* chip: it83xx: remove "CHIP_FAMILY_IT839X"Dino Li2016-03-221-2/+0
* GPIO: Rename and move board_set_gpio_hibernate_stateAnton Staaf2016-03-212-2/+2
* servo_micro: add initial servo_micro buildNick Sanders2016-03-166-0/+459
* oak: Clean up CONFIG_PMIC_FW_LONG_PRESS_TIMER related codesKoro Chen2016-03-161-1/+0
* oak: rev5: increase cycle time for LED in SUSPENDWei-Ning Huang2016-03-161-2/+9
* chell: Indicate when charging in suspendDuncan Laurie2016-03-151-2/+7
* kevin: Add rk3399 power sequencingShawn Nematbakhsh2016-03-144-3/+18
* Cr50: cleanup: put macro args inside parensBill Richardson2016-03-111-1/+1
* kunimitsu: remove CONFIG_POWER_SHUTDOWN_PAUSE_IN_S5Kevin K Wong2016-03-111-1/+0
* Kunimitsu/Lars: correct adc voltage readingKyoung Kim2016-03-112-2/+16
* kevin: Initial board commitShawn Nematbakhsh2016-03-107-0/+785
* Lars: Manually Revert "Lars: Add ALS support"Ryan Zhang2016-03-084-24/+5
* CR50: move platform independent stub calls back to third_partynagendra modadugu2016-03-081-22/+0
* npcx: Rename CONFIG_SHI to CONFIG_HOSTCMD_SPSShawn Nematbakhsh2016-03-081-1/+1
* lucid: fix adc vbus sensingMary Ruthven2016-03-081-2/+2
* CR50: set result size in _cpri__GenerateKeyEcc, _cpri__GetEphemeralEccnagendra modadugu2016-03-071-3/+11
* oak: Fix rev5 battery LEDKoro Chen2016-03-071-12/+17
* npcx: Add CHIP_VARIANT variant for different versions of npcx ec.Mulin Chao2016-03-053-3/+6
* npcx: Add 1.8V IO support for some GPIOs and I2C pins.Mulin Chao2016-03-052-2/+20
* oak: set up base accelerometer rotation matrixRicky Liang2016-03-041-1/+8
* oak: fix issues on building oak rev1-4 ECRong Chang2016-03-033-19/+22
* chell: Enable HW charge ramping for BC1.2 suppliersShawn Nematbakhsh2016-03-022-0/+35
* oak: enable lid angle updateRong Chang2016-03-022-0/+7
View Lorry Controller Status