summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* meowth: zoombini: Removed 5V enable pins.Rachel Nancollas2017-11-171-3/+0
* buttons: Make buttons[] common.Aseda Aboagye2017-11-1737-199/+31
* gru: Make more code space by disabling configsFurquan Shaikh2017-11-171-0/+2
* meowth: Enable MKBP support for events.Aseda Aboagye2017-11-171-0/+7
* meowth: Add temp sensor ADC channels.Aseda Aboagye2017-11-173-5/+19
* servo_v4: disable USB3 interfaceNick Sanders2017-11-161-2/+5
* zoombini: meowth: Enable Vboot hash.Aseda Aboagye2017-11-161-0/+2
* meowth: Toggle PP1800_U on startup/shutdown.Aseda Aboagye2017-11-161-2/+6
* meowth: Add battery pack information.Aseda Aboagye2017-11-161-0/+27
* jerry: Use HOSTCMD_ALIGNED instead of GPIO_SHORTNAMESFurquan Shaikh2017-11-161-1/+1
* meowth: zoombini: Annotate ifdefs.Aseda Aboagye2017-11-165-27/+23
* kevin: Claim some more space by disabling some configsFurquan Shaikh2017-11-161-2/+3
* nautilus: Replace anx74xx with another ps8xxxPhilip Chen2017-11-154-78/+14
* Meowth: Added initial board file.Rachel Nancollas2017-11-156-12/+215
* poppy: Lower sensor max ODRGwendal Grignou2017-11-151-0/+2
* nautilus: Update battery profilePhilip Chen2017-11-151-10/+15
* samus: Change the way host_set_single_event is usedFurquan Shaikh2017-11-151-2/+5
* Revert "poppy/nautilus: Move pmic vr decay enable/disable to suspend/resume h...Furquan Shaikh2017-11-152-4/+16
* jerry: Enable CONFIG_COMMON_GPIO_SHORTNAMESFurquan Shaikh2017-11-151-0/+2
* it83xx: add espi moduleDino Li2017-11-142-0/+4
* grunt: Initial GPIO setup for gruntEdward Hill2017-11-145-958/+169
* scarlet: Remove barometer bmp280Philip Chen2017-11-143-46/+0
* cortex-m: mpu: Support unaligned regions and protect code RAMShawn Nematbakhsh2017-11-141-3/+3
* nautilus: Change USB_C{0,1}_PD_RST_L to be GPIO_ODR_HIGHFurquan Shaikh2017-11-141-2/+2
* poppy/soraka: Change USB_C1_PD_RST_L to be GPIO_ODR_HIGHFurquan Shaikh2017-11-141-1/+1
* zoombini: Set default input ILIM to 128 mA.Aseda Aboagye2017-11-141-1/+1
* Fizz: Switch power source to BJ at G3/S5Daisuke Nojiri2017-11-132-8/+33
* coral: Change GPIO_USB_C1_PD_RST_ODL to be ODR_HIGHScott Collyer2017-11-111-1/+1
* glkrvp: Allow system to boot using DC JackVijay Hiremath2017-11-104-19/+103
* poppy/soraka: set attenuation_factor of opt3001 to 1.Marco Chen2017-11-091-2/+6
* gru: Remove `flashinfo` command for RAM savingsShawn Nematbakhsh2017-11-091-0/+1
* it83xx: pwm: support PWM_CONFIG_DSLEEP config flagDino Li2017-11-092-0/+2
* cleanup: Remove llama boardShawn Nematbakhsh2017-11-097-499/+0
* board: Add support for whiskers boardNicolas Boichat2017-11-093-10/+50
* rainier: initial mainboardEge Mihmanli2017-11-096-0/+1196
* Coral: Fix LED name for factory control led by ectooldavid.huang2017-11-091-5/+5
* cleanup: Remove HOOK_INIT task synchronizationShawn Nematbakhsh2017-11-093-45/+0
* Fizz: Blink LED faster when requesting more powerDaisuke Nojiri2017-11-081-1/+1
* coral: Ensure battery report timer can be restartedScott Collyer2017-11-071-0/+9
* fizz: Enable charge_manager safe mode and never leave itShawn Nematbakhsh2017-11-072-1/+10
* Mark reset and panic functions as noreturnPatrick Georgi2017-11-071-0/+1
* bd9995x: Use fixed PD-port-to-VBUS/VCC mappingShawn Nematbakhsh2017-11-0712-80/+26
* Fizz: Modify thermal tableRyan Zhang2017-11-063-22/+89
* servo_v4: remove gpio endpoint.Nick Sanders2017-11-042-58/+4
* coral: Increase port80 buffer sizeScott Collyer2017-11-031-0/+4
* nautilus: Enable CONFIG_BATTERY_HW_PRESENT_CUSTOMFurquan Shaikh2017-11-031-0/+1
* poppy: Enable CONFIG_BATTERY_HW_PRESENT_CUSTOMFurquan Shaikh2017-11-031-0/+1
* coral: Remove LIMIT_POWER config optionsScott Collyer2017-11-031-2/+0
* nautilus: Support keyboard matrixPhilip Chen2017-11-034-35/+13
* charge_manager: Enter safe mode at bootShawn Nematbakhsh2017-11-0218-223/+5
View Lorry Controller Status