summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* mec1322: hibernate: Don't reconfigure all GPIOsShawn Nematbakhsh2016-01-253-53/+21
* Move platform independent stub calls back tonagendra modadugu2016-01-251-7/+0
* Kunimitsu: Fix leak on pin for battery_present.Kyoung Kim2016-01-223-6/+32
* Kunimitsu: Set the power button debounce time to zero in PMICShaunak Saha2016-01-201-0/+10
* lucid: fix LED charge stateMary Ruthven2016-01-201-4/+8
* chell: Add board support for asserting RTCRSTDuncan Laurie2016-01-202-0/+12
* twinkie: fix USB interfaces count in the 'sink' imageVincent Palatin2016-01-191-1/+3
* Move platform independent stub calls back tonagendra modadugu2016-01-191-95/+0
* GPIO: Use gpio_set_flags instead of ..._by_maskAnton Staaf2016-01-192-4/+2
* chell: Invert board version GPIOsDuncan Laurie2016-01-161-2/+2
* glados / kunimitsu: led: battery LED blinking on low batteryli feng2016-01-152-4/+8
* nuc: Support hibernate_wake_pins on wheatley, npcx_evb and npcx_evb_arm.Mulin Chao2016-01-144-12/+35
* Kunimitsu: Increase 5V rail in PMICKyoung Kim2016-01-141-0/+10
* Skylake: prevent EC from continuing execution after turning 3.3V_DSW off.Kyoung Kim2016-01-135-0/+10
* Kunimitsu/Lars: for PMIC, check i2c response before further initializationKyoung Kim2016-01-132-6/+20
* Initial RSA implementation.stabilize-7821.Bnagendra modadugu2016-01-113-59/+425
* kunimitsu: increase stack size for PD_C0, PD_C1, and PD_CMDKevin K Wong2016-01-111-3/+3
* Lars: Update PMIC settingsRyan Zhang2016-01-111-0/+10
* wheatley: replace Makefile with real link file.Mulin Chao2016-01-081-0/+0
* oak: pd: move power change notification to function board_set_charge_limit.Ben Lok2016-01-082-5/+14
* pd: Add common EC_HOST_EVENT_PD_MCU implementationShawn Nematbakhsh2016-01-073-35/+7
* nuc: Support rpm mode for fan control.Mulin Chao2016-01-062-10/+10
* charger: Change unlocked battery level ignore conditionsShawn Nematbakhsh2016-01-061-1/+1
* Chell: modify led setting for OEM specBruce2016-01-051-8/+1
* wheatley: Add CONFIG_LTO definition to reduce FW size.stabilize-7797.BMulin Chao2015-12-301-0/+1
* kunimitsu: add debug assert flagKevin K Wong2015-12-301-1/+0
* chell / chell_pd: Use power-optimized GPIO defaultsShawn Nematbakhsh2015-12-242-14/+22
* lucid: add LED supportMary Ruthven2015-12-225-1/+207
* lucid: implement fast chargingMary Ruthven2015-12-222-0/+150
* lucid: remove some unnecessary features to save spaceAlec Berg2015-12-221-0/+2
* Move rand_bytes implementation from tpm2 to chip/g.nagendra modadugu2015-12-221-21/+4
* Lars: Update battery settingsRyan Zhang2015-12-181-9/+10
* Kunimitsu: enable power threshold checking in power upli feng2015-12-161-0/+2
* Lars: Update LED settingsRyan Zhang2015-12-161-8/+12
* Chell: modify led setting for led test command.Bruce2015-12-161-2/+2
* Lars: Add ALS console-commandRyan Zhang2015-12-161-0/+1
* it8380dev: Implement GPIO mode for KBS pins and fix gpio_set_level()Dino Li2015-12-142-0/+6
* stm32: Don't use HSI48 clock for chips which don't support itShawn Nematbakhsh2015-12-111-1/+1
* honeybuns: enable updates over USB-PDstabilize-smaug-7731.BVincent Palatin2015-12-112-0/+29
* cr50: add ability to include two identical RW sections in the EC imageVadim Bendebury2015-12-092-0/+2
* glados/chell: Do not pull-up RSMRST to PCH in hibernateDuncan Laurie2015-12-092-0/+4
* Lars: Add Keyboard COL2 InvertRyan Zhang2015-12-072-1/+3
* lars: Fix buildShawn Nematbakhsh2015-12-071-1/+1
* Lars: Add PWM keyboard backlight supportRyan Zhang2015-12-063-1/+19
* Lars: Remove second port of PD firmwareRyan Zhang2015-12-065-136/+19
* snoball: Enable PWMs for post-regulator voltage controlShawn Nematbakhsh2015-12-043-8/+32
* honeybuns: Allow 20v chargingScott2015-12-041-3/+1
* pwm: Add common initialization for PWM pinsShawn Nematbakhsh2015-12-0416-31/+32
* kunimitsu: modify charge LED gpio control to match FAB4 schematicli feng2015-12-032-4/+4
* cr50: add extension command for testing hash primitivesVadim Bendebury2015-12-031-0/+212
View Lorry Controller Status