summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* wand: Enable CONFIG_CHARGE_RAMP_HWNicolas Boichat2018-01-141-0/+2
* grunt: Fix ENABLE_BACKLIGHT to be active lowEdward Hill2018-01-143-1/+29
* grunt: Enable BMI160 gyro interruptsEdward Hill2018-01-142-1/+8
* grunt: Add CONFIG_VBOOT_HASHEdward Hill2018-01-141-7/+4
* rainier: final fix for accel orientation.Ege Mihmanli2018-01-121-2/+2
* meowth: zoombini: Check for battery disconnect.Aseda Aboagye2018-01-122-0/+46
* grunt: Add I2C support for the BMI160Simon Glass2018-01-121-0/+2
* grunt: Enable the CPU temperature sensorSimon Glass2018-01-122-0/+6
* grunt: rename volume GPIOsEdward Hill2018-01-122-4/+2
* meowth_fp: enable the hostcmd interfaceVincent Palatin2018-01-124-2/+6
* Nami: Update WiFi pin defineElmo_Lan2018-01-111-1/+1
* board: rainier: fix accel orientationEge Mihmanli2018-01-111-2/+2
* grunt: Lowering I2C bus speed to 400kHz for TCPC chipsJett Rink2018-01-111-2/+2
* nautilus: bug fix in sensor index.Jongpil Jung2018-01-102-123/+123
* cr50: Don't touch EC reset for USB-EC SPI bridge.Aseda Aboagye2018-01-101-7/+18
* nautilus: Implement workaround for broken reset flagsFurquan Shaikh2018-01-101-0/+12
* cr50: enable deep sleep on BobMary Ruthven2018-01-101-2/+1
* cr50: configure sys_rst_l as wake on high before deep sleepMary Ruthven2018-01-101-21/+13
* lux: Add lux boardNicolas Boichat2018-01-107-9/+85
* driver/charger/isl923x: Make sure CONFIG_CHARGER_NARROW_VDC is setNicolas Boichat2018-01-109-9/+0
* charger/isl923x: Implement charger_get_system_power from PSYSNicolas Boichat2018-01-108-8/+5
* nautilus: update sensor rotation matrix.Jongpil Jung2018-01-101-6/+6
* EFS: Add EFS_VERIFY host commandDaisuke Nojiri2018-01-091-1/+1
* Fizz: override DP EQ setting for Deterministic JitterDevin Lu2018-01-091-0/+9
* grunt: Add accel, gyro, and motion_sense task.Justin TerAvest2018-01-083-0/+178
* stm32: add meowth_fp boardVincent Palatin2018-01-085-0/+158
* cr50: fix annoying LD warningsVadim Bendebury2018-01-051-1/+1
* poppy: Move base detection logic to separate fileNicolas Boichat2018-01-054-202/+223
* soraka: Replace individual files symlinks by directory symlinksNicolas Boichat2018-01-059-8/+1
* poppy/soraka: Remove charger profile override functionsNicolas Boichat2018-01-052-43/+0
* chell: Enable CONFIG_LTONicolas Boichat2018-01-041-0/+1
* charge_state_v2: Add charge_set_output_current_limit functionNicolas Boichat2018-01-042-0/+2
* wand: Make sure battery is cut-off when criticalNicolas Boichat2018-01-041-0/+1
* meowth: zoombini: Add support for OPT3001.Aseda Aboagye2018-01-043-0/+69
* poppy: Disable PULL_UP on BOARD_VERSION4Nicolas Boichat2018-01-031-1/+1
* kahlee: Switch thermal I2C over to 1.8VAlec Thilenius2018-01-031-2/+2
* wand: Increase PWM frequency to 50kHzNicolas Boichat2018-01-021-1/+1
* Nami: Update board directoryDaisuke Nojiri2018-01-026-473/+449
* scarlet: Implement custom charging profilePhilip Chen2017-12-281-20/+113
* glkrvp: Enable discharge on AC configDivya Sasidharan2017-12-281-0/+1
* glkrvp: Fix hibernate <sec> to allow wakeup from hibernationDivya Sasidharan2017-12-281-6/+0
* Nami: Derive board files from NautilusDaisuke Nojiri2017-12-278-818/+1056
* eve_fp: enable %li printf formatVincent Palatin2017-12-251-0/+1
* nautilus/poppy: Drop comment about thermistorNicolas Boichat2017-12-242-2/+0
* fizz/nami: Drop CONFIG_THERMISTOR_NCP15WBNicolas Boichat2017-12-212-4/+0
* ec_ec_comm_slave: Define extpower_is_presentNicolas Boichat2017-12-211-8/+0
* poppy: Do not print base detection value if base stays connectedNicolas Boichat2017-12-211-2/+10
* scarlet: Set the maximal source current as 1.5APhilip Chen2017-12-202-10/+0
* cleanup: Remove Nefario boardPhilip Chen2017-12-208-1629/+0
* meowth: zoombini: Add support for battery cutoff.Aseda Aboagye2017-12-202-0/+20
View Lorry Controller Status