summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* cr50: Add console and TPM vendor commands to get/set board IDPhilip Chen2017-06-023-0/+301
* eve: Swap volume up and down GPIODuncan Laurie2017-06-021-2/+3
* coral: GPIO modifications for differences from ReefScott Collyer2017-06-021-14/+10
* cr50: change the power button handlingVincent Palatin2017-06-021-8/+18
* cr50: configure flash counterVincent Palatin2017-06-022-8/+15
* eve: default ALS config.Todd Broch2017-06-011-1/+1
* cr50: Have CCD_MODE_L respect "ccd keepalive".Aseda Aboagye2017-06-011-3/+4
* eve: Enable double tap gestureScott Collyer2017-06-012-5/+23
* eve: Enable gpio interrupt for bmi160 accelgyro sensorScott Collyer2017-06-011-0/+3
* sensor: Add board specific function for double tap eventScott Collyer2017-06-012-0/+10
* cr50: read fwmp and act on it when controlling console restrictionsVadim Bendebury2017-05-314-13/+104
* pd: ensure tighter timings for IRQ_HPD pulseKevin K Wong2017-05-295-69/+99
* hammer: Prefix configuration descriptor with RO/RW sectionstabilize-9592.15.BNicolas Boichat2017-05-251-1/+8
* hammer: Increase hook stack sizeNicolas Boichat2017-05-251-1/+1
* eve: Implement workaround for broken reset flagsDuncan Laurie2017-05-251-0/+12
* eve: Update actual_key_mask for new scancodesDuncan Laurie2017-05-251-1/+1
* hammer: Store secret in rollback blockNicolas Boichat2017-05-252-1/+2
* mn50: socket controlsNick Sanders2017-05-254-20/+141
* Fizz: Power on ethernet portDaisuke Nojiri2017-05-241-1/+1
* Fizz: Prevent active charge port from being resetDaisuke Nojiri2017-05-242-46/+52
* poppy: Fix tcpc power mode handling for ANXFurquan Shaikh2017-05-241-4/+11
* hammer: Better RO/RB/RW split: 44/4/80 kBNicolas Boichat2017-05-231-9/+9
* eve_fp: add more fingerprint host commandsVincent Palatin2017-05-231-33/+0
* hammer: Do not define CONFIG_ROLLBACK_UPDATE for RW sectionNicolas Boichat2017-05-231-0/+3
* common: sensors: add extra sensor attributesNick Vaccaro2017-05-1813-0/+88
* gru: disable CONFIG_CMD_ALS to reduce bin sizeNick Vaccaro2017-05-181-4/+0
* servo_v4: Added support for HW board ID and limit on VBUS voltageScott Collyer2017-05-182-0/+56
* power_button: Allow PB to be idle at power-onDaisuke Nojiri2017-05-181-0/+1
* it83xx: ec2i: move 'ec2i_setting' to header file of chipDino Li2017-05-182-88/+0
* eve: Shut down PMIC in hibernateDuncan Laurie2017-05-181-32/+16
* eve: Enable mutable scancode for EVT boardsDuncan Laurie2017-05-182-0/+11
* hammer: Make keyboard work at firmware screenNicolas Boichat2017-05-181-2/+3
* poppy/soraka: Basic LED supportNicolas Boichat2017-05-185-3/+161
* npcx7_evb: Add initial board driver of npcx7 ec evb.Mulin Chao2017-05-189-4/+368
* reef_it8320: initial reef_it8320 boardDino Li2017-05-188-904/+363
* poppy: ACCELGYRO3_INT_L is always on gpio 36Nicolas Boichat2017-05-181-5/+0
* usb_hid_touchpad: Add config options to set dimensionsNicolas Boichat2017-05-181-0/+16
* Fizz: Set up charge suppliers at bootDaisuke Nojiri2017-05-177-198/+91
* board: reef_it8320: copy board/reefDino Li2017-05-178-0/+2997
* cr50: remove code that was used to work around sys_rst issuesMary Ruthven2017-05-161-35/+1
* ec: add initial coral related filesYH Lin2017-05-168-0/+2989
* cr50: drop obsolete/addressed TODOsVadim Bendebury2017-05-163-20/+0
* hammer: Add staff boardNicolas Boichat2017-05-163-1/+14
* CR50: replace dcrypto_memset with always_memsetnagendra modadugu2017-05-153-16/+23
* hammer: Add pull-up on write protect pinNicolas Boichat2017-05-151-1/+1
* cr50: add LONG_LIFE bit to suppress RO uart.Marius Schilder2017-05-121-0/+6
* Fizz: Add LED controlDaisuke Nojiri2017-05-122-0/+112
* Fizz: Add recovery buttonDaisuke Nojiri2017-05-123-1/+23
* mn50: initial checkinNick Sanders2017-05-127-7/+730
* Fizz: Enable/disable USB Type-A portsDaisuke Nojiri2017-05-113-0/+18
View Lorry Controller Status