summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* krane: Use the PWM mode to adjust brightness as lowestLeo Zhou2019-11-221-4/+22
* it83xx/spi_master: correct the module IDtim2019-11-221-4/+4
* all hatch variants: Make sure EC_RST_ODL is GPIO_LOCKEDShelley Chen2019-11-225-0/+55
* all hatch variants: Assign SYS_RST_ODL to GPIOC5Shelley Chen2019-11-225-4/+5
* Dratini/Jinlon: Add support for TEMP_SENSOR3Devin Lu2019-11-226-10/+28
* jinlon: change TCPC port 0 from ANX7447 to PS8751Devin Lu2019-11-223-9/+8
* Trogdor: Initial board commitWai-Hong Tam2019-11-228-0/+1648
* cleanup: Segregate ioexpander related drivers in ioexpander folderVijay Hiremath2019-11-226-6/+6
* volteer: disable CONFIG_BRINGUPKeith Short2019-11-211-6/+0
* cr50: update ownersVadim Sukhomlinov2019-11-211-0/+1
* ish: Use lsm6dsm polling mode on tgl rvp platformLeifu Zhao2019-11-211-16/+0
* driver: lsm6dsm: Allow building without CONFIG_ACCEL_FIFOYuval Peress2019-11-2111-11/+11
* cr50: drop unused definition of CONFIG_FLASH_READOUT_PROTECTIONVadim Bendebury2019-11-211-1/+0
* cr50: remove flash nonvolatile counter spaceVadim Bendebury2019-11-211-9/+3
* kappa: fix charge/discharge control setting orderDevin Lu2019-11-211-3/+3
* volteer: enable EC controlled fanKeith Short2019-11-211-0/+2
* volteer: Add USB-C policyVijay Hiremath2019-11-212-0/+12
* Drallion: Fix Upside/down orientation when portrait modeantony_wang2019-11-201-1/+1
* cr50: Add support for testing SHA-384, SHA-512 with CRYPTO_TEST=1Vadim Sukhomlinov2019-11-191-3/+10
* servo_micro: shutdown HW module at sysjumpJett Rink2019-11-192-2/+28
* jacuzzi: Add keyboard functionalityAlexandru M Stan2019-11-194-1/+30
* puff: use cometlake-discrete power driverPeter Marheine2019-11-182-18/+15
* kohaku : change battery discharging max temperatureYongBeum.Ha2019-11-181-1/+1
* Add OWNERS for Cr50 specific directoriesVadim Bendebury2019-11-161-0/+8
* kohaku: enable CONFIG_BATTERY_CHECK_CHARGE_TEMP_LIMITSPaul Fagerburg2019-11-151-0/+1
* kukui,kodama,jacuzzi: fix charge/discharge control setting orderYilun Lin2019-11-153-12/+18
* volteer: enable eDP backlightKeith Short2019-11-151-0/+7
* puff: Add config for power sensors.Andrew McRae2019-11-142-0/+10
* Endeavour: update GPIO and port maps, remove PDJeff Chase2019-11-136-572/+38
* kohaku: add meaningful names to temp sensorsPaul Fagerburg2019-11-131-4/+4
* kohaku: fix indentsPaul Fagerburg2019-11-131-7/+7
* retimer: usbc retimer name cleanupDenis Brockus2019-11-131-1/+1
* kappa: remove symbolic link from jaccuziDevin Lu2019-11-137-1/+644
* Clean up double tap related definitionHeng-Ruey Hsu2019-11-133-3/+4
* puff: Add USB A4 overcurrent GPIOAndrew McRae2019-11-131-0/+1
* damu: add initial content for the buildPaul Ma2019-11-126-0/+644
* kappa: initial setupPaul Ma2019-11-121-0/+1
* jinlon: Initial EC imageDevin Lu2019-11-127-0/+1116
* volteer: add BC1.2 for USBC port 0Keith Short2019-11-121-0/+1
* Volteer: configure USBC port 0Keith Short2019-11-123-1/+15
* atlas: Always advertise DFP_D connectedCaveh Jalali2019-11-121-1/+5
* endeavour: initial build from kalista/karmastabilize-12669.BJeff Chase2019-11-128-0/+1512
* helios: Fix battery discharge FET access config settingScott Collyer2019-11-111-6/+6
* baseboard/kukui: fix pogo extpower statusYilun Lin2019-11-111-1/+8
* power/mt8183: Need 1s pwrbtn press to exit off stateYilun Lin2019-11-112-0/+2
* Enable double tap host detection in kukuiHeng-Ruey Hsu2019-11-112-1/+27
* puff: Update gpio list with unused pins.Andrew McRae2019-11-101-7/+35
* volteer: add charger supportKeith Short2019-11-101-0/+1
* volteer: add initial battery supportKeith Short2019-11-094-0/+77
* board/garg: Configure the number of USB PD portsKarthikeyan Ramasubramanian2019-11-091-0/+8
View Lorry Controller Status