summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* jacuzzi: bringup ecTing Shen2019-07-316-0/+513
* baseboard/kukui: support battery/charger variantsTing Shen2019-07-311-6/+8
* Trembyle: Add USB-C sink BC12 driverDenis Brockus2019-07-302-22/+4
* pi3usb9201: Fix typo in structure name.Keith Short2019-07-303-3/+3
* kukui: add baseboard/kukuiTing Shen2019-07-308-1394/+38
* casta & bluebird : make charge state to ST_DISCHARGEYongBeum Ha2019-07-301-1/+2
* Helios:Modify Power LED behavior under suspendBarney_Liao2019-07-301-3/+4
* Trembyle: Initial GPIO and CONFIG_* definitionsEdward Hill2019-07-295-375/+169
* dorp: enable ec_feature kbbacklit by SKUIDDevin Lu2019-07-292-0/+22
* dorp: add support keyboard backlightDevin Lu2019-07-292-3/+4
* treeya: Add new grunt-family board.Chris Wang2019-07-258-0/+707
* Kindred: update Led behaviorben.chen2@quanta.corp-partner.google.com2019-07-242-14/+15
* cr50: add closed loop reset print statementsMary Ruthven2019-07-241-0/+2
* garg: add simplo BYD 916Q2294H batteryDevin Lu2019-07-242-4/+34
* board: Add bloonchipper and dartmonkey boardsTom Hughes2019-07-242-0/+2
* isl923x: Check max current in isl923x_set_ac_prochotDaisuke Nojiri2019-07-241-5/+1
* util: Unify separate flash_fp_mcu scripts into single common oneTom Hughes2019-07-233-96/+0
* hatch_fp: Add RDP (read protection) support to STM32F4Tom Hughes2019-07-241-1/+1
* krane: Fix g-sensor reference point for all revisionsTing Shen2019-07-231-23/+6
* krane: limit backlight current for all revisions.Ting Shen2019-07-231-8/+10
* servo_v4: Support changing CC polarityWai-Hong Tam2019-07-222-37/+68
* servo_v4: Support command to limit the max_voltageWai-Hong Tam2019-07-221-3/+25
* Remove __7b, __8b and __7bfDenis Brockus2019-07-2082-505/+507
* servo_v4: Support sink roles with PD comm enabledWai-Hong Tam2019-07-202-2/+25
* servo_v4: Support dual-role portWai-Hong Tam2019-07-202-79/+135
* servo_v4: Minor update the PD policy and commentsWai-Hong Tam2019-07-201-9/+17
* servo_v4: Remove unnecessary init for GPIO MODULE_USB_PDWai-Hong Tam2019-07-202-7/+7
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-1984-542/+583
* servo_v4: Fake CC2 voltage when servo v4 as snkWai-Hong Tam2019-07-191-7/+26
* nocturne: Don't enter DP Alt Mode when AP is off.Aseda Aboagye2019-07-181-0/+15
* nocturne: Only source 5V when chipset is on.Aseda Aboagye2019-07-181-0/+4
* Helios:Initial Type-C Controller PS8751 settingBarney_Liao2019-07-181-0/+7
* chip/host: Add spi+trng support, and add gpio funcCraig Hesling2019-07-181-0/+9
* nocturne: Don't wake on any MKBP in suspend.Aseda Aboagye2019-07-171-1/+2
* Basic implentation of the Maxim Integrated MAX32660 within the EC OSJerry Bradshaw2019-07-175-0/+110
* cr50: provide separate environment variable to enable crypto testsVadim Bendebury2019-07-171-1/+6
* cleanup: refactor CPRINTF("[%T ...]\n") to CPRINTSJack Rosenthal2019-07-171-1/+1
* Helios:Modify lid and base rotation matrixBarney_Liao2019-07-171-9/+4
* cleanup: Segregate USB MUX related drivers in usb_mux folderVijay Hiremath2019-07-172-2/+2
* kohaku: Support SDI battery packPhilip Chen2019-07-172-1/+30
* fluffy: Initial board commit.Aseda Aboagye2019-07-175-0/+565
* kohaku: Always return BP_YES for battery presence for board id 1Furquan Shaikh2019-07-161-0/+15
* Bobba: Add new LGC batteryben.chen2@quanta.corp-partner.google.com2019-07-122-0/+30
* arcada: lower i2c bus speed to 400kHzJett Rink2019-07-091-1/+1
* kukui: code cleanupTing Shen2019-07-093-39/+4
* kohaku: coordinate a rotation matrix for accel sensorstabilize-12331.BInno.Park2019-07-091-3/+3
* kukui: add chargen to the set of CLI commandsVadim Bendebury2019-07-041-0/+1
* kindred: Add new batteryben.chen2@quanta.corp-partner.google.com2019-07-032-35/+36
* krane: remove als mutexTing Shen2019-07-031-2/+0
* hatch_fp: enable fp_sensor taskTom Hughes2019-07-032-3/+2
View Lorry Controller Status