summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* meowth: zoombini: Mask off 5V PGOOD and COMP_C.Aseda Aboagye2017-12-181-2/+11
* meowth: Fix PPC configs.Aseda Aboagye2017-12-181-8/+7
* meowth: Init LEDs off.Aseda Aboagye2017-12-181-8/+18
* ec: Re-configure GPIO02 to be INPUT | PULL_UP for power savingayowu2017-12-141-1/+1
* zoombini: Add support for P1 PPC (port 1 and 2)Rachel Nancollas2017-12-141-0/+12
* Fizz: Remove power control of V3P3_USBPDDaisuke Nojiri2017-12-142-10/+2
* scarlet: Enable DMA for UART_RXPhilip Chen2017-12-141-0/+1
* meowth: fixed EN_PP3300_WLAN and USB_PD_RST_L statesRachel Nancollas2017-12-141-2/+2
* nautilus: Limit input current to fraction of negotiated limitYB.Ha2017-12-131-0/+5
* zoombini: meowth: Enable 3A output.Aseda Aboagye2017-12-132-1/+21
* nautilus : update battery infoYB.Ha2017-12-131-5/+5
* meowth: zoombini: Reduce LED brightness.Aseda Aboagye2017-12-133-3/+41
* grunt: Use PPC for USB PDEdward Hill2017-12-134-118/+160
* power: cannonlake: Fix power state tracking.Aseda Aboagye2017-12-121-2/+2
* cr50: add board property deep sleep and detect ap flagsMary Ruthven2017-12-122-4/+15
* hammer: Detect backlight circuitryNicolas Boichat2017-12-122-3/+31
* it83xx: adc: add support ADC13-16Dino Li2017-12-123-5/+13
* meowth: zoombini: Remove slp signal pulldowns.Aseda Aboagye2017-12-121-8/+8
* meowth: zoombini: Add overcurrent notification.Aseda Aboagye2017-12-122-3/+108
* grunt: Update battery infoEdward Hill2017-12-111-4/+4
* scarlet: Support different battery packs for different SKUsPhilip Chen2017-12-112-27/+71
* scarlet: Define battery profilePhilip Chen2017-12-112-3/+22
* scarlet: blink charging LED in debug modeMatthias Kaehlcke2017-12-111-0/+15
* ccd: restrict password setting to allowed statesVadim Bendebury2017-12-111-0/+6
* grunt: Add keyboard backlightBenjamin Gordon2017-12-113-0/+22
* nautilus: remove internal pull down on rev0 and rev1.Jongpil Jung2017-12-091-1/+1
* scarlet: Enable button commandPhilip Chen2017-12-091-0/+3
* cr50: do not cache FWMP contentsVadim Bendebury2017-12-081-26/+12
* cr50: increase console task stack sizeVadim Bendebury2017-12-081-1/+1
* grunt: Remove I2C pull upsEdward Hill2017-12-081-5/+5
* Fizz: Set PD operating power to 50WDaisuke Nojiri2017-12-082-6/+7
* zoombini: Remove EN_PP3300_TRACKPAD from Zoombini.Rachel Nancollas2017-12-082-13/+5
* nautilus : change sensor i2c levelYB.Ha2017-12-082-3/+11
* servo_micro: default to UART3 enabledNick Sanders2017-12-072-6/+23
* i2c: support large reading in i2c_xfer()Chun-Ta Lin2017-12-071-0/+2
* meowth: zoombini: Add display backlight control.Aseda Aboagye2017-12-063-0/+18
* meowth: zoombini: Add volume buttons.Aseda Aboagye2017-12-063-0/+6
* Fizz: Set PD max power to 100WDaisuke Nojiri2017-12-061-3/+2
* eve_fp: update fingerprint architectureVincent Palatin2017-12-062-3/+7
* ppc: Create generic PPC driver framework.Aseda Aboagye2017-12-062-23/+24
* meowth: zoombini: Use PPC calls instead of GPIOs.Aseda Aboagye2017-12-064-83/+40
* chell: Disable CONFIG_CMD_I2C_XFER to free up flash spaceJenny TC2017-12-061-0/+1
* wheatly: Disable console commands to free up flash spaceJenny TC2017-12-061-0/+2
* cr50: mark ccdstate console command safeMary Ruthven2017-12-051-3/+3
* Fizz: Remove AMON_BMONDaisuke Nojiri2017-12-042-7/+0
* cleanup: Remove honeybuns boardShawn Nematbakhsh2017-12-0410-1159/+0
* servo_micro: default to uart enabled.Nick Sanders2017-12-012-6/+6
* board: Set BM160 Accel and Gyro to identical matrix.Gwendal Grignou2017-12-014-4/+4
* scarlet: Add support for CONFIG_EMULATED_SYSRQstabilize-10176.65.Bstabilize-10176.58.Bstabilize-10176.54.Bstabilize-10176.47.Bstabilize-10176.13.Brelease-R64-10176.BBrian Norris2017-11-301-0/+1
* grunt: Add charger and SOC thermal sensorsJustin TerAvest2017-11-302-0/+62
View Lorry Controller Status