summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* grunt: Update battery infoEdward Hill2017-12-111-4/+4
* scarlet: Support different battery packs for different SKUsPhilip Chen2017-12-112-27/+71
* scarlet: Define battery profilePhilip Chen2017-12-112-3/+22
* scarlet: blink charging LED in debug modeMatthias Kaehlcke2017-12-111-0/+15
* ccd: restrict password setting to allowed statesVadim Bendebury2017-12-111-0/+6
* grunt: Add keyboard backlightBenjamin Gordon2017-12-113-0/+22
* nautilus: remove internal pull down on rev0 and rev1.Jongpil Jung2017-12-091-1/+1
* scarlet: Enable button commandPhilip Chen2017-12-091-0/+3
* cr50: do not cache FWMP contentsVadim Bendebury2017-12-081-26/+12
* cr50: increase console task stack sizeVadim Bendebury2017-12-081-1/+1
* grunt: Remove I2C pull upsEdward Hill2017-12-081-5/+5
* Fizz: Set PD operating power to 50WDaisuke Nojiri2017-12-082-6/+7
* zoombini: Remove EN_PP3300_TRACKPAD from Zoombini.Rachel Nancollas2017-12-082-13/+5
* nautilus : change sensor i2c levelYB.Ha2017-12-082-3/+11
* servo_micro: default to UART3 enabledNick Sanders2017-12-072-6/+23
* i2c: support large reading in i2c_xfer()Chun-Ta Lin2017-12-071-0/+2
* meowth: zoombini: Add display backlight control.Aseda Aboagye2017-12-063-0/+18
* meowth: zoombini: Add volume buttons.Aseda Aboagye2017-12-063-0/+6
* Fizz: Set PD max power to 100WDaisuke Nojiri2017-12-061-3/+2
* eve_fp: update fingerprint architectureVincent Palatin2017-12-062-3/+7
* ppc: Create generic PPC driver framework.Aseda Aboagye2017-12-062-23/+24
* meowth: zoombini: Use PPC calls instead of GPIOs.Aseda Aboagye2017-12-064-83/+40
* chell: Disable CONFIG_CMD_I2C_XFER to free up flash spaceJenny TC2017-12-061-0/+1
* wheatly: Disable console commands to free up flash spaceJenny TC2017-12-061-0/+2
* cr50: mark ccdstate console command safeMary Ruthven2017-12-051-3/+3
* Fizz: Remove AMON_BMONDaisuke Nojiri2017-12-042-7/+0
* cleanup: Remove honeybuns boardShawn Nematbakhsh2017-12-0410-1159/+0
* servo_micro: default to uart enabled.Nick Sanders2017-12-012-6/+6
* board: Set BM160 Accel and Gyro to identical matrix.Gwendal Grignou2017-12-014-4/+4
* scarlet: Add support for CONFIG_EMULATED_SYSRQstabilize-10176.65.Bstabilize-10176.58.Bstabilize-10176.54.Bstabilize-10176.47.Bstabilize-10176.13.Brelease-R64-10176.BBrian Norris2017-11-301-0/+1
* grunt: Add charger and SOC thermal sensorsJustin TerAvest2017-11-302-0/+62
* nautilus/poppy/soraka: Add support for dumping PMIC fault registersFurquan Shaikh2017-11-304-0/+106
* grunt: Initial USB PD board code.Edward Hill2017-11-305-45/+338
* nds32: enable GCC LTODino Li2017-11-301-8/+1
* coral: disable tablet mode interrupt for clamshell models.Harry Pan2017-11-301-0/+7
* coral: never enter tablet mode for clamshell SKUs.Harry Pan2017-11-301-1/+6
* nami: initial setup for ecYH Lin2017-11-298-0/+1738
* nautilus: enable gyro and accelerometer.Jongpil Jung2017-11-292-130/+153
* coffeecake: Change host high pullup from Rp1500 to Rp3000Rong Chang2017-11-291-1/+1
* grunt: Enable CONFIG_BRINGUP.Justin TerAvest2017-11-291-0/+2
* coffeecake: Workaround P0 EN_USB_PD leakageRong Chang2017-11-293-17/+39
* coffeecake: Set PID to assigned one for Coffee CakeBenson Leung2017-11-291-1/+1
* coffeecake: Set to 22.5W maximum output via Type-C (2.5A @ 9V)Benson Leung2017-11-292-4/+4
* coffeecake: Set usb output voltage back to 5V on a power supply resetBenson Leung2017-11-291-0/+1
* coffeecake: Set Unconstrained Power (aka Ext) bit on 5V PDOBenson Leung2017-11-291-1/+4
* coffeecake: enable dual roleRong Chang2017-11-296-38/+182
* coffeecake: initial commitRong Chang2017-11-298-0/+873
* nautilus: correct board id.Jongpil Jung2017-11-281-2/+2
* Coral: add Bruce features.Ryan Zhang2017-11-282-2/+3
* chipset: Introduce CHIPSET_STATE_ANY_SUSPENDFurquan Shaikh2017-11-287-13/+8
View Lorry Controller Status