summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* osiris,volmar: disable TCPC VCONNBoris Mittelberg2023-02-222-4/+1
* dibbi: Update EN_PPVAR_BJ_ADP_OD and its uses.Sam McNally2023-02-212-3/+3
* dibbi: Change EC_RECOVERY_BTN_OD to active high.Sam McNally2023-02-212-2/+3
* dibbi: Keep barrel-jack presence interrupts enabled.Sam McNally2023-02-211-2/+0
* dibbi: Set maximum PD input to 20V, 3.25A, 65W.Sam McNally2023-02-211-1/+5
* chip/stm32: ADC fixesJes B. Klinke2023-02-212-8/+4
* aurash: update EC related functionScott Chao2023-02-2015-586/+522
* board/hyperdebug: Add DAC supportJes B. Klinke2023-02-162-11/+117
* Marasov: Disable TCPC VCONNMichael5 Chen12023-02-161-1/+0
* dibbi: Configure USB_C0_SBU_MUX_FAULT as input, without pull-down.Sam McNally2023-02-151-1/+1
* dibbi: Split I2C configuration from baseboard and add HDMI-related busesSam McNally2023-02-152-2/+49
* kuldax: Using fw_config return peripheral charger countben chen2023-02-153-2/+25
* brask,coachz,constitution,kuldax,redrix: add board_get_pchg_count()ben chen2023-02-155-5/+25
* dibbi: Update board_vbus_source_enabled() to use ppc_is_sourcing_vbus().Sam McNally2023-02-151-1/+1
* dibbi: Remove configuration for CC lines.Sam McNally2023-02-152-10/+5
* dibbi: Update USB-C i2c channel.Sam McNally2023-02-151-0/+2
* dibbi: Add USB-A port 3.Sam McNally2023-02-152-1/+2
* dibbi: Invert BJ_ADP_PRESENT_L.Sam McNally2023-02-152-8/+8
* board/hyperdebug: Atomic setting of gpio mode and levelJes B. Klinke2023-02-141-1/+63
* aurash: Initial EC imageZoey Wu2023-02-1415-0/+2081
* brask: move externs to header fileScott Chao2023-02-143-3/+3
* omnigul: Modify power parametersLogan_Liao2023-02-131-3/+3
* zephyr: move usbc interrupt handler to shimJason Yuan2023-02-091-2/+2
* jinlon: Adjust TEMP_SENSOR_4 thresholds to reduce fan speed in clamshellDevin Lu2023-02-091-14/+14
* Casta : Change charging voltage and currentYongBeum.Ha2023-02-081-1/+6
* Omnigul: implement keyboard matrixfelixtw_chang2023-02-085-2/+241
* Nautilus : Change charging voltage and currentYongBeum.Ha2023-02-081-0/+6
* test: Check TPM_SEED is reset after rebootFiras Sammoura2023-02-082-0/+2
* dibbi: Add PPC supportLiam Flaherty2023-02-074-20/+57
* board/hyperdebug: Correct TX/RX namingJes B. Klinke2023-02-061-2/+2
* board/hyperdebug: Increase clock speedJes B. Klinke2023-02-061-3/+15
* dibbi: Updating EC pinout based on latest schematicsAdam Mills2023-02-064-66/+81
* constitution: Initial EC imageDavid Wu2023-02-0315-0/+2123
* omnigul: Modify GPIO configLeila Lin2023-02-0311-554/+57
* board/hyperdebug: Add logic analyzer supportJes B. Klinke2023-02-023-87/+699
* Omnigul : Enable Battery parameter.Logan_Liao2023-01-312-27/+29
* Casta : Change Maximum Voltage of BatteryYongBeum.Ha2023-01-311-1/+1
* Nautilus : Change Maximum Voltage of BatteryYongBeum.Ha2023-01-311-1/+1
* Zephyr: Add configs for F75303matt_wang2023-01-302-0/+14
* board/hyperdebug: Split board.c into several filesJes B. Klinke2023-01-265-514/+537
* board/hyperdebug: Enable DFUJes B. Klinke2023-01-254-4/+44
* Omnigul : Change Charger from BQ25720 to ISL9241.Logan_Liao2023-01-162-9/+8
* Default charger current derating to 5%Peter Marheine2023-01-1261-0/+61
* vell: Lower priority to set board id 5 GPIOsDevin Lu2023-01-121-1/+1
* kuldax: Remove the bring-up featuresben chen2023-01-121-0/+3
* omnigul: Initial EC imagejamie_chen2023-01-1219-0/+2278
* board/hyperdebug: Enumerate and configure SPI ports via USBJes B. Klinke2023-01-112-2/+146
* board/hyperdebug: Add support for OCTOSPIJes B. Klinke2023-01-111-21/+308
* include/spi.h: Introduce CONFIG_SPI_MUTABLE_DEVICE_LISTJes B. Klinke2023-01-093-2/+3
* dratini: Set TCPC_AUX_SWITCH to 0xC on Port 0 on mux setBoris Mittelberg2023-01-092-0/+25
View Lorry Controller Status