summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* reef: corrections to motion sensorsDavid Hendricks2016-06-132-39/+34
* CR50: add a simple ASN.1 parser & certificate verifierstabilize-8447.Bnagendra modadugu2016-06-121-2/+142
* amenia: reject charge port on init till battery is initializedVijay Hiremath2016-06-113-11/+42
* reef: Add internal pull-up on LID_OPEN gpioFurquan Shaikh2016-06-101-1/+2
* charge_manager: Allow rejected 'Dont charge' request on initShawn Nematbakhsh2016-06-101-0/+14
* CR50: add support for hardware modexpnagendra modadugu2016-06-091-0/+3
* reef: Minimum battery voltage settings in no battery conditionVijay Hiremath2016-06-082-1/+10
* reef: Enable BC1.2 supportVijay Hiremath2016-06-084-69/+17
* Driver: BD99955: Use Charger interrupt to detect VBUS activityVijay Hiremath2016-06-084-32/+5
* BD99955: Add support to detect non-BC1.2 compliant chargersVijay Hiremath2016-06-081-6/+7
* elm: Add support for pd_control commandstabilize-8429.BNicolas Boichat2016-06-071-0/+1
* reef: Initialize EC_PCH_PWROK lowDavid Hendricks2016-06-071-1/+1
* reef: Rename SMI/SCI GPIOs and enable CONFIG_SCI_GPIODavid Hendricks2016-06-062-2/+3
* reef: Don't set LPC pins in gpio.incDavid Hendricks2016-06-061-10/+12
* cr50: enable case closed debugMary Ruthven2016-06-033-47/+39
* g: implement EC/AP flash access via CCDMary Ruthven2016-06-034-4/+163
* reef: add trackpad power controlKevin K Wong2016-06-031-2/+7
* kevin: Add USB charger tasksShawn Nematbakhsh2016-06-035-41/+26
* reef: really disable USB-A in S3 -> S5David Hendricks2016-06-031-1/+1
* reef: Move PP3300 and PMIC enable to occur togetherDavid Hendricks2016-06-031-6/+6
* reef: sleep for 10ms when re-enabling USB_TCPC_PWRDavid Hendricks2016-06-031-2/+2
* reef: enable WiFi power control supportKevin K Wong2016-06-031-0/+3
* cleanup: pd: Define VBUS detection sourceShawn Nematbakhsh2016-06-0220-6/+20
* COMMON: move precharge time to config.hRyan Zhang2016-06-011-0/+2
* CR50: add tests for 1024-bit RSA.nagendra modadugu2016-06-011-7/+80
* CR50: port dcrypto/cr50 code to depend on third_party/cryptocnagendra modadugu2016-05-315-16/+23
* elm: get VBUS statue from GPIOYH Huang2016-05-313-2/+6
* nvmem: provide a function to wipe out nvmem contentsVadim Bendebury2016-05-312-6/+12
* servo_v4: add serial number and gpio commandsNick Sanders2016-05-311-0/+5
* kevin: Add bma255 sensor for lid accelometerWonjoon Lee2016-05-312-9/+55
* jerry: Free up flash spaceShawn Nematbakhsh2016-05-311-1/+3
* elm: set SPI2 interface to low in S5Koro Chen2016-05-301-18/+33
* reef: Initialize charge suppliers after change manager is initializedVijay Hiremath2016-05-281-11/+31
* BD99955: Get the VBUS provided status from individual portsVijay Hiremath2016-05-283-3/+23
* reef: Re-factor PP5000 and PP3300 enable/disableDavid Hendricks2016-05-271-41/+29
* apollolake: modify PMIC_EN and RSMRST_N handlingKevin K Wong2016-05-272-0/+17
* lucid: Add battery temp to temp_sensors listMary Ruthven2016-05-272-0/+23
* cr50: disable UART peripheral when the device is powered off.Mary Ruthven2016-05-271-1/+7
* cr50: dont drive UART output if servo is connectedMary Ruthven2016-05-274-60/+175
* cr50: monitor the state of Servo, the EC, and APMary Ruthven2016-05-274-7/+223
* Cr50: NvMem: Connected function stubs in /board/tpm2/NVMem.cScott2016-05-262-2/+62
* Cr50: Enabling NvMem in board.c and board.hScott2016-05-262-0/+48
* servo_micro: add programmable serial numberNick Sanders2016-05-262-3/+4
* amenia: update TCPC0 reset/power down assertion timeKevin K Wong2016-05-261-2/+2
* CR50: increment prime generation counternagendra modadugu2016-05-261-5/+15
* reef: Initialize VBUS + BC1.2 charge_manager suppliersShawn Nematbakhsh2016-05-241-0/+29
* elm: Add support for I2C tunnel protectionNicolas Boichat2016-05-242-1/+14
* reef: keep analogix pd chip in resetAaron Durbin2016-05-241-1/+1
* reef: change USB_C0_PD_INT voltage toleranceAaron Durbin2016-05-241-1/+1
* reef: don't reset analogix pd chip out of band of driverAaron Durbin2016-05-241-4/+3
View Lorry Controller Status