summaryrefslogtreecommitdiff
path: root/chip
Commit message (Expand)AuthorAgeFilesLines
* npcx: i2c: Don't do i2c_unwedge / reset on repeated start requeststabilize-8516.BMulin Chao2016-06-271-2/+5
* cr50: enable highsec jittery clockMary Ruthven2016-06-271-1/+1
* Cr50: Set the default idle action to SleepBill Richardson2016-06-251-5/+16
* g: write 0 to RBOX_WAKEUP_CLEAR to clear registersMary Ruthven2016-06-241-0/+1
* rk3399: kevin: Adding get_rtc_alarm functionality.Shelley Chen2016-06-211-2/+41
* npcx: vbnvcontext: Fix misaligned accessShawn Nematbakhsh2016-06-201-11/+18
* g: remove the fuse override in rboxMary Ruthven2016-06-162-15/+1
* CR50: refactor debug_printf() for use as a library functionnagendra modadugu2016-06-153-18/+29
* it83xx: Support different PLL frequencies setting (24/48/96 MHz)Dino Li2016-06-145-26/+156
* npcx: Fixed host access pending bit issue in INT11 ISR.Mulin Chao2016-06-141-10/+10
* CR50: add a simple ASN.1 parser & certificate verifierstabilize-8447.Bnagendra modadugu2016-06-124-2/+213
* CR50: add support for writing to info banknagendra modadugu2016-06-103-8/+76
* CR50: fix bug in rom_flash.c debug print messagenagendra modadugu2016-06-101-2/+3
* CR50: add support for hardware modexpnagendra modadugu2016-06-092-2/+20
* npcx: i2c: Return slave ACK status on zero-byte read / writeShawn Nematbakhsh2016-06-081-38/+52
* npcx: gpio: Don't increase priority of SHI_CS for non-SHI boardsShawn Nematbakhsh2016-06-081-0/+4
* g: Enable SOF calibration after first SOF tokenBill Richardson2016-06-082-8/+23
* g: implement EC/AP flash access via CCDMary Ruthven2016-06-033-0/+357
* stm32: i2c: Busy loop for a while waiting for interruptNicolas Boichat2016-06-021-5/+23
* CR50: port dcrypto/cr50 code to depend on third_party/cryptocnagendra modadugu2016-05-3113-2203/+208
* g: upgrade: wipe out NVRAM on upgradesVadim Bendebury2016-05-311-0/+4
* Cr50: Export the chip-specific SPI master functionsNadim Taha2016-05-311-0/+15
* Timer initialization & conversion bug fixesNadim Taha2016-05-281-16/+9
* cr50: disable UART peripheral when the device is powered off.Mary Ruthven2016-05-272-1/+20
* cr50: dont drive UART output if servo is connectedMary Ruthven2016-05-271-1/+6
* cr50: monitor the state of Servo, the EC, and APMary Ruthven2016-05-271-0/+3
* kevin: rk3399: ectool interface for EC RTC alarmShelley Chen2016-05-271-0/+11
* NvMem: Added NV Memory module to ec/common/Scott2016-05-261-1/+1
* servo_micro: add programmable serial numberNick Sanders2016-05-261-2/+110
* servo_v4: Fix ADC console commandNick Sanders2016-05-267-216/+0
* it83xx: fix wrong setting of 'IT83XX_ECPM_SCDCR3' registerDino Li2016-05-241-3/+0
* it83xx: Add GPIO group K and LDino Li2016-05-242-7/+25
* kevin: rk3399: enabling RTC wakeupShelley Chen2016-05-231-1/+14
* chip: it83xx: Optimize interrupt usage of LPC accessDino Li2016-05-182-12/+15
* npcx: Modify gpio's interrupt utilitiesMulin Chao2016-05-181-22/+14
* shorten long console command namesVadim Bendebury2016-05-181-1/+1
* npcx: i2c: Fix spurious NACK after i2cscanMulin Chao2016-05-171-4/+28
* it83xx: Complete EC interrupt liststabilize-8337.BDino Li2016-05-162-16/+67
* g: Add GR_KEYMGR_HKEY_FRR to registers.hBill Richardson2016-05-161-4/+4
* npcx: shi: Allow up to 10ms from CS assertion to first data byteShawn Nematbakhsh2016-05-121-1/+1
* npcx: Fixed bug that unexpected value of timer which source clock is 32KMulin Chao2016-05-113-5/+35
* mec1322: Don't try to inline pwm_get_keep_awake_mask()Stefan Reinauer2016-05-102-2/+2
* npcx: shi: Fixes for REBOOT_EC host command handlingShawn Nematbakhsh2016-05-101-11/+11
* kevin: Move RAM from data section to codeShawn Nematbakhsh2016-05-102-3/+3
* keyboard: it83xx: add COL02 inverted featureDino Li2016-05-061-0/+9
* npcx: shi: Improve reliability of SPI host command interfaceMulin Chao2016-05-062-126/+241
* npcx: spi: disable all port from board structWonjoon Lee2016-05-061-3/+5
* hooks: Add relative HOOK_INIT priority for peripheralsShawn Nematbakhsh2016-05-0511-11/+12
* Cr50: Enable the USB SOF clock auto-calibrationstabilize-8282.BBill Richardson2016-05-044-4/+167
* npcx: add device id for npcx586g/npcx576gKevin K Wong2016-05-041-0/+4
View Lorry Controller Status