| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Define ppc_prints and ppc_err_prints (to do nothing) for test builds.
BUG=none
TEST=make tests BOARD=ampton
BRANCH=none
Signed-off-by: Abe Levkoy <alevkoy@chromium.org>
Change-Id: Ief446c4eb15def6b95173a846c634ceb5f40948f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2299417
Tested-by: Patryk Duda <pdk@semihalf.com>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The return values for ppc_is_sourcing_vbus(), ppc_is_port_latched_off(),
ppc_is_vbus_present() are boolean, so EC_ERROR_UNIMPLEMENTED and
EC_ERROR_INVAL cannot be returned.
BUG=none
BRANCH=none
TEST=none
Signed-off-by: Edward Hill <ecgh@chromium.org>
Change-Id: Ic56fd5ac75e5f0ad6e21c803feb929983f08aaf3
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2290664
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The driver function to set FRS enable only exists if
CONFIG_USB_PD_FRS_PPC is enabled, so we must also make its callers
conditional in the same way. For consistency, also revise the TCPC
FRS code paths to be conditional.
BUG=b:146393213
BRANCH=None
TEST=make buildall
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Change-Id: I3fb14c711dd2abdf6ef77d469b2103f37daac182
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2276125
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
De-duplicate strings in PPC drivers. Saves 312 bytes on Volteer.
Average flash increase of 211 bytes.
BUG=b:158572770
BRANCH=none
TEST=make buildall
Signed-off-by: Keith Short <keithshort@chromium.org>
Change-Id: I5ca5c935f974b04216ce4d90e6f6d6b9103e8b75
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2278586
Commit-Queue: Denis Brockus <dbrockus@chromium.org>
Reviewed-by: Denis Brockus <dbrockus@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some PPCs have integrated CC line detection to trigger FRS faster, but
this needs to be enabled from the USBC policy engine only after the sink
capabilities have been exchanged.
BUG=b:148144711
TEST=make buildall
BRANCH=none
Change-Id: Iaa64f64845c5ffdd32fa66a3eb6f6251abb7c157
Signed-off-by: Eric Herrmann <eherrmann@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2056493
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Certain SKUs of certain boards have lesser number of USB PD ports than
defined by CONFIG_USB_PD_PORT_COUNT. Hence rename
CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNT.
BUG=b:140816510, b:143196487
BRANCH=octopus
TEST=make -j buildall; Boot to ChromeOS
Change-Id: I7c33b27150730a1a3b5813b7b4a72fd24ab73c6a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1879337
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Allow limited PPC chips to default to EC_ERROR_UNIMPLEMENTED
for functions in the driver that are not needed.
BUG=b:138599218
BRANCH=none
TEST=make buildall -j
Change-Id: I5242ef285eb277c06d516ab09f7a74f76d7d34b2
Signed-off-by: Denis Brockus <dbrockus@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1829405
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Recent coverity scan indicated a potential illegal memory access in
ppc_enter_low_power_mode(). This patch fixes it.
BUG=none
BRANCH=none
TEST=Compiled
Change-Id: I0df1ca23340cd4466f8e71349b89ca1ab68aadbf
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1574099
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mechanical replacement of bit operation where operand is a constant.
More bit operation exist, but prone to errors.
Reveal a bug in npcx:
chip/npcx/system-npcx7.c:114:54: error: conversion from 'long unsigned int' to 'uint8_t' {aka 'volatile unsigned char'} changes value from '16777215' to '255' [-Werror=overflow]
BUG=None
BRANCH=None
TEST=None
Change-Id: I006614026143fa180702ac0d1cc2ceb1b3c6eeb0
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1518660
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The SN5S330 has FETs for the SBU lines which need to be controlled by
the TCPM. This commit adds a function to control the SBU FETs and
enables them when configuring the USB mux.
This commit also fixes a bug with the external VBUS current limit
setting by setting it appropriately to a min of ~3A.
BUG=b:114340064
BRANCH=firmware-nocturne-10984.B
TEST=Flash nocturne; plug in hoho; verify that external display is
shown. Bounce thru S5, verify that external display still works.
TEST=Repeat above with superspeed hub instead.
Change-Id: I931f7a47d4eb28e8d9e3cb188601ce0889a44f8d
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1244382
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1530125
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Type-C Power Path Controllers provide overcurrent protection. This
commit adds support into the USB PD task for overcurrent events while we
are in source role. The USB PD 3.0 spec recommends that ports issue a
hard reset when an overcurrent condition occurs on a port.
Additionally, we'll allow a source port to overcurrent 3 times before
latching off VBUS from the port entirely. The source path will be
re-enabled after ~1s after each overcurrent event.
BUG=b:69935262,b:114680657
BRANCH=None
TEST=Boot to ChromeOS in grabbiter. No overcurrent events reported when
the sink is drawing <= 3.20 A. Overcurrent events are reported when the
sink is drawing > 3.25 A. After 3 reports, the port is latched off and
power delivery is stopped. The port is re-enabled only after the sink is
disconnected. Also when the sink is drawing current at 3.24 A, there is
one report of overcurrent. The port gets disabled in response to that
event. But the port is re-enabled after 1 second since overcurrent event
is reported only once. After the port is re-enabled, the sink is able to
draw the set current. When the overcurrent event is reported, I can see in
the kernel logs that the overcurrent condition is detected by the kernel.
EC Logs:
[3391.984462 C1: PPC detected Vbus overcurrent!]
[3391.984953 C1: overcurrent!]
[3392.044935 C1: PPC detected Vbus overcurrent!]
[3392.045425 C1: overcurrent!]
[3392.061404 C1: PPC detected Vbus overcurrent!]
[3392.061894 C1: overcurrent!]
[3392.062142 C1: OC event limit reached! Source path disabled until
physical disconnect.]
[3392.077226 C1: PPC detected Vbus overcurrent!]
[3392.077532 C1: overcurrent!]
[3392.077891 C1: OC event limit reached! Source path disabled until
physical disconnect.]
[3392.092660 C1: PPC detected Vbus overcurrent!]
[3392.092966 C1: overcurrent!]
[3392.093213 C1: OC event limit reached! Source path disabled until
physical disconnect.]
Kernel Logs:
[ 3356.560456] usb usb2-port1: over-current condition
[ 3356.768434] usb usb2-port2: over-current condition
[ 3356.976446] usb usb2-port4: over-current condition
[ 3357.184441] usb usb2-port5: over-current condition
[ 3357.392445] usb usb2-port6: over-current condition
Change-Id: Ib070f261e98264cd88725ebce7d10e0798267e3b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/1286300
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Commit-Queue: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/807633
Commit-Ready: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a low power mode method for PPCs behind a new config.
Implement the low power method for SN5S330 based off of TI AE
recommendation.
BRANCH=none
BUG=b:111520593,b:111006203
TEST=CL stack produce lower power during bip hibernate
Change-Id: Icd22f88a8f65c2cd5ab1c95b0750b1eb61e91923
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1166183
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The NX20P3483 is a USB PD and Type C high voltage sink/source combo
switch. This CL adds support for this PPC variant. Unlike the TI
SN5S330, the NX20P3483 does not support VCONN and does not need to be
informed of CC polarity by the TCPM. To account for these differences,
2 new PPC config options are added and the driver for the TI SN5S330
was modified to include these new options.
The SNK/SRC switch mode for the NX20P3483 is controlled by 2 GPIO
signals which may be connected the EC or directly to the TCPC. To
handle both cases, the ppc_chips structure was modified with a flags,
snk_gpio, and src_gpio elements.
BUG=b:74206647
BRANCH=none
TEST=make -j buildall and verified there are no build errors.
Change-Id: Ic4415ab7571b80e7661ea673434eaf4cf1f1fd2d
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/966926
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:72292985
BRANCH=None
TEST=Flash meowth; Verify with twinkie that Vconn is provided for a sink
that requires it.
Change-Id: I8168d2e4c46e04810dcf5c2898b2c337424eefec
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/888224
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the sn5s330 PPC is being used to detect VBUS presence
(CONFIG_USB_PD_VBUS_DETECT_PPC), then enable interrupts and call
usb_charger_vbus_change when VBUS_GOOD changes.
BUG=b:72007153,b:72007492
BRANCH=none
TEST=Connect 3A and 1A USB-A chargers to each of Grunt's USB-C ports,
check that BC1.2 detection is working:
With 1A:
> chgsup
port=0/1, type=7, cur=500mA, vtg=5000mV, lsm=1
With 3A:
> chgsup
port=0/1, type=7, cur=2400mA, vtg=5000mV, lsm=1
TEST=Boot Grunt to OS, then connect USB2 mouse or USB3 flash drive to each
of Grunt's USB-C ports. Devices do not work due to b:71772180, but gpioget
shows EC is setting USB_C0/1_BC12_VBUS_ON_L correctly.
Change-Id: Iffc352105a321997adb364b9fbb8bafef248c224
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/887938
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Boards with a PPC will use the PPC to discharge the VBUS line instead
of the TCPC or GPIO discharge path.
BRANCH=none
BUG=b:72179253
TEST=Fall time after device removal on grunt within spec now
Change-Id: I822923a1cedb32a20efc3610cce4437ade3387f0
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/886563
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We don't want the PPC to connect the CC lines from the
TCPC to the USB connector until the TCPC resistors are
set in a valid state (SINK initially).
If we connect the CC lines (happens in the ppc_init) before
setting the resistor values, some TCPC will be toggling the
CC line between Rp/Rd since it doesn't detect a cable yet.
In the dead battery charging case, connecting the toggling
CC lines to the charger can rail the CC lines to 3.3 V signaling
to the charger to disconnect Vbus, thus browning out the board.
BRANCH=none
BUG=b:71865251
TEST=Grunt powers on via usbc p0 with and without USB hub.
Change-Id: I8e78aa2af42075398fab89a2dccef5e7df27b260
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/882305
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The PPC needs to update its Vbus source current limits whenever our
policy changes on the PD ports. This commit simply adds and API to do
so.
BUG=None
BRANCH=None
TEST=With some extra code to enable 3A out, flash zoombini; Plug in a PD
device to a port, verify that it gets 5V @ 3A. Plug in a second device,
verify that we re-send new source caps of 5V @ 1.5A.
TEST=Repeat above for meowth.
Change-Id: Ifa4bc8b7df87f7730f2bcded842906d43171394b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/818335
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The SN5S330 has support for detecting when Vbus is present on a port.
This commit simply adds an API to query the PPC.
BUG=None
BRANCH=None
TEST=`make -j buildall`.
TEST=Flash a board with the SN5S330, with some extra code, verify that
Vbus can be detected with this API.
Change-Id: I45bf7ff24bcdc447efe12932f51f8094108e29d5
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/791502
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
This commit introduces a driver framework for power path controllers.
It provides some common PPC APIs as well as allowing a board to use
multiple different PPCs drivers/parts. This should make it easier to
add PPC drivers in the future.
BUG=None
BRANCH=None
TEST=`make -j buildall`
TEST=Flash zoombini; verify PPC works as expected.
TEST=Flash meowth; verify PPC works as expected.
Change-Id: Icfb99f384610590b431456cfd28d4aff18442cb2
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/807630
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|