summaryrefslogtreecommitdiff
path: root/driver/charger
Commit message (Expand)AuthorAgeFilesLines
...
* raa489000: Disable BFET in hibernateAseda Aboagye2020-06-131-7/+5
* charger/isl9238c: enable slew rate controlTing Shen2020-06-102-30/+50
* ISL9241: Fix slew rate controlEric Herrmann2020-06-052-0/+13
* raa489000: Add support for DVCAseda Aboagye2020-06-042-0/+135
* bc12: create bc12 driver structureTing Shen2020-05-293-11/+60
* SM5803: Update initsDiana Z2020-05-291-12/+12
* SM5803: Enable trickle chargingDiana Z2020-05-152-51/+61
* SM5803: Add cached vbus presenceDiana Z2020-05-142-0/+14
* SM5803: Use integer math for VbusDiana Z2020-05-141-1/+1
* SM5803: Correct Vbus threshold registersDiana Z2020-05-141-2/+2
* SM5803: Enable interrupts after setting thresholdsDiana Z2020-05-101-4/+6
* rt946x: remove usb_charger_set_switches from board.hTing Shen2020-05-071-0/+4
* SM5803: Update charger initsDiana Z2020-05-051-3/+3
* raa489000: Keep BFET & LDO on for primary chargerAseda Aboagye2020-05-051-8/+21
* OCPC: Add concept of active charger ICAseda Aboagye2020-05-011-1/+6
* bc12: Limit max current to 1.5AAseda Aboagye2020-04-302-16/+16
* SM5803: Only enable auto charging when battery is presentDiana Z2020-04-301-3/+6
* raa489000: Bit 7 of control3 is to enable autonomous chargingMarco Chen2020-04-291-1/+6
* SM5803: Share setting of FLOW_REG1 between tasks betterDiana Z2020-04-281-9/+20
* sm5803: Fix interrupt enable bugAseda Aboagye2020-04-281-1/+1
* Raa489000: fix VBUS voltage registerKo_Ko2020-04-271-1/+1
* sm5803: Add trigger for board_vbus_present_changeAseda Aboagye2020-04-251-3/+7
* raa489000: Add hibernate functionAseda Aboagye2020-04-212-0/+102
* SM5803: Add new init parametersDiana Z2020-04-212-2/+82
* raa489000: Fix get_input_current()Aseda Aboagye2020-04-152-2/+15
* charger: Add chgnum arg to charger_get_input_currentAseda Aboagye2020-04-151-1/+1
* SM5803: Add open drain parameter to GPIO setupDiana Z2020-04-102-2/+7
* SM5803: Clear Vbus source bits when setting charge modeDiana Z2020-03-261-10/+6
* SM5803: Configure lower TINT thresholdDiana Z2020-03-262-10/+30
* SM5803: OTG, charger detect, and interrupt functionalityDiana Z2020-03-232-6/+178
* Charger: Add driver function for sourcing OTGDiana Z2020-03-212-7/+2
* ISL923x: Accept charger chip for prochot functionsDiana Z2020-03-162-6/+7
* SM5803: Initial driverDiana Z2020-03-162-0/+624
* bq25710: Do not soft reset when running out of RW imageScott Collyer2020-03-091-14/+19
* kodama: rewrite charger CHG_CTRL1 registerxiong.huang2020-03-021-0/+2
* isl923x: Add isl923x_set_comparator_inversion()Aseda Aboagye2020-02-252-0/+34
* Kodama: delay to enable charger EOC and TE functionxiong.huang2020-02-141-0/+7
* Charger: change get_vbus_voltage to return EC errorDiana Z2020-01-285-19/+30
* Charger: Remove unused charger driversDiana Z2020-01-2814-2249/+0
* Charger: Create charger driver structureDiana Z2020-01-2814-773/+1093
* rt946x: lock ADC before cut-off.Allen Chiang2020-01-202-4/+41
* charger: Add support for RAA489000Aseda Aboagye2020-01-182-75/+163
* bq25710: Check battery disconnect state prior to enabling ICO modeScott Collyer2020-01-181-2/+4
* bq25710: Ensure low power mode is disabled when reading reg 0x3EScott Collyer2020-01-141-2/+17
* rt946x: reduce DB and BL driving capacityAllen Chiang2020-01-142-0/+57
* rt946x: polish charger log formatEric Yilun Lin2019-12-241-5/+6
* charger/rt946x: support AC state detectionEric Yilun Lin2019-12-201-0/+21
* rt946x: add missing new line in console logTing Shen2019-12-181-1/+1
* rt946x: reduce log infoEric Yilun Lin2019-12-181-46/+18
* charger/rt946x: expose rt946x_get_adcYilun Lin2019-12-172-10/+19
View Lorry Controller Status