summaryrefslogtreecommitdiff
path: root/driver/charger
Commit message (Expand)AuthorAgeFilesLines
* isl9241: Toggle learning mode when fully chargedDevin Lu2021-04-091-0/+25
* SM5803: Add interrupt processing function to headerDiana Z2021-04-061-0/+3
* bq25720: Add VSYS_TH2 tuning supportCaveh Jalali2021-04-062-0/+26
* bq25720: Add Vmin Active Protection registerCaveh Jalali2021-04-012-0/+6
* raa489000: Add raa489000_enable_asgate()Aseda Aboagye2021-03-302-0/+9
* bq25710: Update legacy system_is_in_rw checkCaveh Jalali2021-03-251-1/+1
* isl923x: change control1_mutex to use K_MUTEX_DEFINEJack Rosenthal2021-03-231-2/+1
* isl9241: change control1_mutex to use K_MUTEX_DEFINEJack Rosenthal2021-03-231-4/+1
* Create a public header for isl923xSimon Glass2021-03-232-41/+5
* isl9241: Add devicetree property for switching frequencyKeith Short2021-03-171-12/+4
* charger: Add new APIs for measured charge valuesAseda Aboagye2021-03-112-22/+77
* isl923x: Fix the calculation formula in raa489000_get_input_current()Raymond Chung2021-03-111-2/+3
* delbin: Setting charger switching frequency to 724kHz.Michael5 Chen12021-03-082-0/+34
* charger: Add support for the TI BQ25720Caveh Jalali2021-03-042-6/+34
* bq25710: Allow compilation with CHARGE_RAMP_SWCaveh Jalali2021-02-191-0/+2
* sasuke : change prochot debounce timeYongBeum.Ha2021-02-031-1/+6
* RAA489000 : Change Charge Voltage StepYongBeum.Ha2021-02-021-1/+1
* Madoo: Fix main board charger can't wake from hibernateKo_Ko2021-01-222-4/+6
* raa489000: Add support for linear chargeAseda Aboagye2021-01-141-0/+70
* SM5803: Only enable automatic fast charge with connected batteryDiana Z2021-01-131-1/+31
* volteer: Separate out some baseboard USB-C config codeSimon Glass2021-01-091-3/+0
* Create a public header for isl9241Simon Glass2021-01-071-26/+1
* tcpm: Move tcpm.h into an include directorySimon Glass2020-12-221-1/+1
* zephyr: Enable isl9241 for VolteerSimon Glass2020-12-171-1/+7
* sm5803a: Enable IBAT_CHG ADC for all chargersAseda Aboagye2020-12-151-12/+12
* sm5803: Add linear charge supportAseda Aboagye2020-12-101-1/+64
* sm5803: Add is_icl_reached methodAseda Aboagye2020-12-102-0/+20
* charger: replace charger_get_input_current usesEric Yilun Lin2020-12-088-31/+76
* charger: rename charger_set_input_currentEric Yilun Lin2020-12-089-56/+59
* sm5803: add parenthesis to the input of macrosEric Yilun Lin2020-12-041-4/+4
* eldrid: modify charger configurationTerry Chen2020-12-032-1/+53
* isl923x: make get_amon_bmon a functionEric Yilun Lin2020-12-031-43/+59
* raa489000: Adjust charger IC settings for rippleAseda Aboagye2020-11-232-0/+25
* isl9241: add missing newline to cprintf callsCaveh Jalali2020-11-181-2/+2
* SM5803: Add overcurrent reportingDiana Z2020-11-181-1/+30
* Casta : Support Multi-ChargerYongBeum.Ha2020-11-179-80/+94
* sm5803: Add hardware charging rampingDevin Lu2020-11-122-26/+69
* raa489000: Ignore BATGONE on aux chargersAseda Aboagye2020-11-112-0/+21
* isl923x: Disable PSYS monitor on suspendWai-Hong Tam2020-11-101-2/+2
* SM5803: Raise allowable charging failures per minuteDiana Z2020-11-051-1/+1
* sm5803: Use average registers for ADCAseda Aboagye2020-11-032-6/+10
* atomic: rename atomic_read_clear to atomic_clearDawid Niedzwiecki2020-11-021-1/+1
* SM5803: Only run inits once per EC bootDiana Z2020-10-281-0/+41
* tree: Use new atomic_* implementationDawid Niedzwiecki2020-10-271-2/+2
* SM5803: Disable ramps on current set in dischargeDiana Z2020-10-202-4/+18
* SM5803: Clear out bad state in OTG disableDiana Z2020-10-202-3/+25
* SM5803: Re-start charging on recoverable errorsDiana Z2020-10-142-2/+81
* BQ25710 : Change Voltage StepYongBeum.Ha2020-10-061-1/+1
* isl9241: set BC12 charge minimum voltageKeith Short2020-10-011-0/+3
* tree: rename atomic_* functions to deprecated_atomic_*Jack Rosenthal2020-09-291-2/+2
View Lorry Controller Status