summaryrefslogtreecommitdiff
path: root/driver/retimer
Commit message (Expand)AuthorAgeFilesLines
* TUSB544: Set TUSB544 always to DP Alt mode sourceSue Chen2020-09-291-4/+2
* bb_retimer: Bypass safe mode configuration in retimermadhusudanarao amara2020-09-231-1/+15
* bb retimer: Use mutex to lock the access to shared NVMVijay Hiremath2020-08-252-12/+15
* pi3hdx1204: Print error if enable failsEdward Hill2020-08-221-3/+9
* Ezkinil: Fix HDMI retimer suspend / resumeEdward Hill2020-08-221-0/+3
* BB retimer: Remove FORCE_PWR GPIO from EC driverVijay Hiremath2020-08-192-6/+14
* BB retimer: Set USB3 speed only when USB mode is enabledAyushee2020-07-311-8/+9
* retimer/tusb544: set the HPD pin for DP/Dock modeDivagar Mohandass2020-07-181-3/+7
* zork: Use CBI only and remove retimer probe codeDenis Brockus2020-07-174-35/+0
* bb_retimer: add power up timingKeith Short2020-07-011-0/+14
* usb_pd: Remove pd_cable dependent Thunderbolt code from common codeAyushee2020-06-261-2/+3
* usb_pd: TBT: Refactor limiting the cable speedAyushee2020-06-051-1/+1
* BB retimer: Add 'vPro_Dock_Detect/DP_Overdrive' bitAyushee2020-06-032-0/+12
* BB retimer: Correct setting USB4 cable speedAyushee2020-05-292-33/+37
* BB retimer: Set 'active/passive' bit for USB modeAyushee2020-05-271-3/+4
* BB retimer: For USB/DP/USB4, set 'Re-timer_Driver' bit based on SOP' VDO2Ayushee2020-05-271-4/+18
* BB retimer: Refactor TBT retimer bitsAyushee2020-05-271-53/+84
* BB retimer: Refactor 'Active/Passive' bitAyushee2020-05-211-17/+37
* BB retimer: Add 'USB3_Speed' bitAyushee2020-05-212-0/+9
* BB retimer: Add 'USB2_connection' bitVijay Hiremath2020-05-212-11/+48
* pi3hdx1204: Allow tuning to be adjusted.David Huang2020-05-212-5/+63
* BB retimer: Update Bit 12Ayushee2020-05-192-9/+0
* pi3hdx1204: Add driver.Edward Hill2020-05-052-0/+45
* USB-C: Determine port partner's data role based on PD's data roleVijay Hiremath2020-03-191-3/+4
* TUSB544: Add driver structure declarationDiana Z2020-03-162-20/+22
* variant trembyle: use fw_config for mux initializationDenis Brockus2020-03-124-0/+5
* nb7v904m: Fix bug with CHIP_EN polarityAseda Aboagye2020-03-061-2/+2
* bb_retimer: Set Data_Connection_Present bit in Safe modeVijay Hiremath2020-03-051-0/+1
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-2810-195/+182
* volteer: Update USB C1 reset for next buildstabilize-volteer-12931.B-masterKeith Short2020-02-261-4/+9
* TUSB544: Add driverDiana Z2020-02-252-0/+142
* trembyle: adjust gain on USB-A ps8811 for gen2 speedsDenis Brockus2020-02-061-0/+50
* ps8818: debug cleanupDenis Brockus2020-02-062-56/+49
* ps8802: debug cleanup and make wake_up accessibleDenis Brockus2020-02-062-76/+104
* PS8818: use read/modify/write for regs with reserved bitsDenis Brockus2020-02-012-15/+36
* ps8802: fix redriver configurationDenis Brockus2020-01-312-23/+210
* ps8818: fix redriver configurationDenis Brockus2020-01-312-9/+94
* Burnside bridge retimer: Add USB4 mode bitsAyushee2020-01-312-22/+37
* ps8818: allow access to all of the register pagesDenis Brockus2020-01-302-12/+93
* TCPMv1: Cleanup sending TBT control flags to hostVijay Hiremath2020-01-291-11/+11
* driver/retimer: Add support for ON Semi NB7V904MAseda Aboagye2020-01-292-0/+184
* usb_mux: cleanup: Replace mux state enums with ec_command bit flagVijay Hiremath2020-01-283-18/+18
* zork: PS8802/PS8818 dynamic detection cleanupDenis Brockus2020-01-234-9/+105
* retimer: framework cleanup for chip specific control configDenis Brockus2020-01-164-16/+39
* ps8802: use hardware pin for IN_HPDDenis Brockus2020-01-141-2/+1
* TCPMv1: Correct the TBT3 Discovery and Entry FlowVijay Hiremath2020-01-101-3/+3
* retimer: Add PS8802 driverEdward Hill2019-12-262-0/+102
* retimer: Add PS8818 driverEdward Hill2019-12-202-0/+68
* Burnside bridge retimer: Add Thunderbolt-compatible mode bitsAyushee2019-12-172-12/+88
* usb_pd: Get current DP pin modeVijay Hiremath2019-12-111-1/+1
View Lorry Controller Status