summaryrefslogtreecommitdiff
path: root/driver/tcpm
Commit message (Expand)AuthorAgeFilesLines
* nct38xx: Set pull on both CC lines on disconnectEdward Hill2019-12-121-1/+30
* nct38xx: Add tcpci_nct38xx_select_rp_valueEdward Hill2019-12-121-1/+7
* tcpci: change connect to auto discharge disconnectDenis Brockus2019-12-125-33/+28
* nct38xx: Use common tcpci set_polarityDenis Brockus2019-12-101-15/+1
* tcpci: tcpci_tcpm_set_polarity should not clobberDenis Brockus2019-12-101-2/+4
* nct38xx: change rmw operations to use i2c updateDenis Brockus2019-12-101-17/+14
* tcpci: add tcpc_update routines for read/mod/writeDenis Brockus2019-12-102-56/+69
* tcpci: add command to dump standard TCPCI registersKeith Short2019-12-091-0/+89
* fusb302: implement vbus measurement using tcpcTing Shen2019-12-092-0/+62
* tcpci: POWER_CTRL auto discharge disconnect initDenis Brockus2019-12-053-50/+60
* tcpci: restructure fault fetch and clearingDenis Brockus2019-12-042-17/+41
* fusb302: fix lower power modeTing Shen2019-11-292-3/+66
* trembyle: tcpc fault needs to be clearedDenis Brockus2019-11-251-0/+22
* driver/it83xx: Don't set cc when set message header power roleRuibin Chang2019-11-181-1/+8
* Add a board specific helper to return USB PD port countKarthikeyan Ramasubramanian2019-11-092-3/+6
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-017-22/+22
* tcpci: fix tcpc_alert error messageCaveh Jalali2019-11-011-2/+2
* tcpm/fusb302: implement low power modeTing Shen2019-10-311-1/+10
* tcpci: remove extra write when sending HARD_RSTJett Rink2019-10-231-0/+10
* tcpci: protect against buffer overflowCaveh Jalali2019-10-111-6/+12
* trembyle: board specific fast switch enable/disableDenis Brockus2019-10-091-0/+2
* tcpc: driver changes for FRSDenis Brockus2019-10-073-22/+99
* pd: FRS enable/disable and interrupt handlingDenis Brockus2019-10-072-2/+20
* printf: Fix formatting errorsEvan Green2019-10-051-1/+2
* tcpci: add missing CPRINTS argumentCaveh Jalali2019-09-261-1/+1
* tcpc/mt6370: Change rp_def level and enable rx deadzone as sinkGene Chen2019-09-172-3/+47
* driver/tcpm/anx7447: bound port argumentPatrick Georgi2019-09-121-0/+4
* anx7447: Add proper mux setting for DP alt mode and DTS mode (CCD)Lee, Shawn C2019-09-122-2/+70
* Revert "it83xx/intc:message id of pd packet repeat"Yilun Lin2019-08-252-13/+0
* tglrvpu_ite: Adding VCONN supportAyushee2019-08-231-5/+0
* driver/tcpm/it83xx: Enable TCPC receive SOP'Ruibin Chang2019-08-211-18/+39
* driver: IO expander: nct38xx: add the interrupt supportCHLin2019-08-213-15/+64
* usb_pd: Adding USB-C cable detectionAyushee2019-08-163-3/+14
* ps8xxx: disable DCI modeCaveh Jalali2019-08-144-22/+110
* usb: convert cc1 from int to enumJett Rink2019-08-099-12/+26
* ps8xxx: stub out enter_low_power_modeCaveh Jalali2019-08-071-1/+7
* Trembyle: Fix USB-C TCPC driversDenis Brockus2019-08-021-0/+3
* driver: IO expander: nct38xx: add support for NCT38XX series chipsCHLin2019-07-241-0/+17
* driver/tcpm: block bad config combinations at compile timeTing Shen2019-07-243-0/+13
* Remove __7b, __8b and __7bfDenis Brockus2019-07-2014-94/+93
* drivers/tcpm/ps8xxx: Return hardcoded vendor and product idKarthikeyan Ramasubramanian2019-07-201-0/+5
* ec_commands: Rename 'renew' to 'live' in EC_CMD_USB_PD_CHIP_INFOKarthikeyan Ramasubramanian2019-07-206-13/+13
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-1914-96/+112
* anx7447: USB Mux is reset when TCPM is resetSam Hurst2019-06-131-8/+14
* TCPC: Make tcpc_config handle other bus typesDaisuke Nojiri2019-06-104-37/+37
* usbpd: Fix infinite init loopDaisuke Nojiri2019-06-071-5/+5
* driver/tcpm: Tidy tcpci_tcpm_transmitJacob Garber2019-05-281-10/+8
* USB-PD: Consolidate tcpc_config declarations in usb_pd_tcpm.hDaisuke Nojiri2019-05-211-5/+0
* tcpci/usb_pd_fuzz: Avoid using unitialized data in payloadNicolas Boichat2019-05-161-0/+2
* ampton: tune the dp mux to improve external monitor compatibilityJames_Chao2019-05-071-0/+1
View Lorry Controller Status