summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* SM5803: Ignore low thershold interrupts when not throttledDiana Z2020-08-101-5/+16
* SM5803: Update initsDiana Z2020-08-101-5/+6
* SM5803: Expand charger dumpDiana Z2020-08-081-0/+11
* sm5803: Pet watchdog during charger_dumpAseda Aboagye2020-08-081-2/+7
* SM5803: Set up precharge currentDiana Z2020-08-072-0/+13
* driver/fingerprint: Add a common sensor maintenance functionTom Hughes2020-08-065-0/+64
* driver/fingerprint: Set dead pixels to unknown on init in BEPTom Hughes2020-08-061-0/+2
* driver/fingerprint: Add fp_sensor_maintenance functionTom Hughes2020-08-062-0/+61
* driver/fingerprint: Exclude header on emulator build, not test buildTom Hughes2020-08-061-1/+1
* tcpmc2: fix TD.PD.LL3.E2 Retransmission testJett Rink2020-08-066-18/+12
* isl9241: Set AC prochotEdward Hill2020-08-052-0/+21
* ec: change usage of dummySam Hurst2020-08-054-22/+22
* nct38xx: hard disable sinking when cc is set to open/openDenis Brockus2020-08-041-1/+33
* driver/bc12: mt6360: Add ldo regulator controls.Pi-Hsun Shih2020-08-042-0/+260
* driver: bma253: use rotation matrix to handle offsetsJian-Jia Su2020-08-041-2/+11
* SM5803: Disable Ibus PROCHOT comparator in initDiana Z2020-08-011-4/+8
* sm5803: Add charger_dump console commandAseda Aboagye2020-07-311-0/+34
* sm5803: Update driver with latest initsAseda Aboagye2020-07-311-4/+10
* Reland "TCPCI: Check for failed i2c write before using alert register"Diana Z2020-07-311-1/+4
* BB retimer: Set USB3 speed only when USB mode is enabledAyushee2020-07-311-8/+9
* chip/it83xx, it8xxx2: implement detect cc disconnection interrupt for SRC roleRuibin Chang2020-07-313-16/+157
* anx7447: Add mux registers to register dumpAndrew McRae2020-07-281-0/+15
* AOZ1380: initialize srcing/snking flags to reflect hardwareDenis Brockus2020-07-285-0/+64
* driver/tcpm/ps8xxx: Consistent DCI disable methodDevin Lu2020-07-281-46/+19
* usb_mux: Retain mux's power state on readAyushee2020-07-241-3/+14
* ps8743: use register control HPDZick Wei2020-07-242-2/+5
* Revert "TCPCI: Check for failed i2c write before using alert register"Wu-Cheng Li2020-07-241-4/+1
* TCPCI: Check for failed i2c write before using alert registerDiana Z2020-07-241-1/+4
* zork: Restore AP mux setting after rebootEdward Hill2020-07-242-0/+52
* SM5803: Enable Vbus monitor when sourcingDiana Z2020-07-232-1/+23
* driver/tcpm: add support for PS8755Devin Lu2020-07-233-8/+19
* chip/it8320, it81202: Implement fast role swap functionRuibin Chang2020-07-233-0/+110
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
* ps8805: Follow the sequence to enable the DCI register accessWai-Hong Tam2020-07-211-4/+23
* sm5803: Set precharge termination thresholdAseda Aboagye2020-07-212-0/+28
* sm5803: Use VBUS ADCs for VBUS presenceAseda Aboagye2020-07-211-5/+6
* sm5803: Update charge procedure for new SiAseda Aboagye2020-07-212-4/+51
* OCPC: Calculate system & battery resistanceAseda Aboagye2020-07-211-9/+10
* battery: Expose battery_manufacture_date() as APIWai-Hong Tam2020-07-214-0/+20
* retimer/tusb544: set the HPD pin for DP/Dock modeDivagar Mohandass2020-07-181-3/+7
* battery: Fix obtaining battery manufacture dateWai-Hong Tam2020-07-171-5/+5
* zork: Use CBI only and remove retimer probe codeDenis Brockus2020-07-174-35/+0
* SM5803: Update initsDiana Z2020-07-171-0/+9
* syv682X: Add support for FRSEric Herrmann2020-07-171-9/+105
* USB PD: Move board FRS configuration out of TCPCIEric Herrmann2020-07-171-6/+1
* driver/tcpm: set PD_EVENT_RX_HARD_RESET event when receive hard resetRuibin Chang2020-07-144-10/+7
* raa489000: Add instantaneous curr/volt readingsAseda Aboagye2020-07-142-1/+25
* raa489000: Reset BFET to normal during initAseda Aboagye2020-07-141-0/+12
* TCPCI: Update alert mask to allow FRS alertsEric Herrmann2020-07-141-0/+3
* OCPC: Use enum chg_id valuesDiana Z2020-07-111-10/+10
View Lorry Controller Status