summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* Syv682x: Set 5V source current limit base on the config definitionDavid Huang2020-06-151-1/+11
* tcpci: Add workaround for devices with broken vSafe0VKeith Short2020-06-131-5/+9
* raa489000: Disable BFET in hibernateAseda Aboagye2020-06-131-7/+5
* raa489000: Don't write to reserved registersAseda Aboagye2020-06-131-17/+27
* raa489000: Improve low power modeAseda Aboagye2020-06-131-1/+16
* ANX7447: Cleanup spurious register accessAndrew McRae2020-06-101-44/+0
* charger/isl9238c: enable slew rate controlTing Shen2020-06-103-30/+51
* tcpc: Call default TCPC register dumpKeith Short2020-06-061-0/+2
* usb_pd: TBT: Refactor limiting the cable speedAyushee2020-06-051-1/+1
* ISL9241: Fix slew rate controlEric Herrmann2020-06-052-0/+13
* driver: lis2ds: add a setting if interrupt active low or notInno.Park2020-06-041-3/+12
* raa489000: Add support for DVCAseda Aboagye2020-06-042-0/+135
* bc12/pi3usb9281: Fix max ilim for SDPAseda Aboagye2020-06-031-1/+1
* lisdw12: add missing header fileTing Shen2020-06-031-0/+1
* tcpci: use the correct register to configure extended alertsPeter Marheine2020-06-031-1/+1
* TCPCI: acknowledge extended alertsPeter Marheine2020-06-031-1/+6
* Zork: Switch PS8743 from IOEX_USB_C1_DATA_EN to I2CEdward Hill2020-06-031-1/+7
* BB retimer: Add 'vPro_Dock_Detect/DP_Overdrive' bitAyushee2020-06-032-0/+12
* tcpci: Added some common tcpci debug helpersDenis Brockus2020-06-021-6/+109
* ANX3447: Add some more registers to dumpAndrew McRae2020-05-302-0/+23
* BB retimer: Correct setting USB4 cable speedAyushee2020-05-292-33/+37
* pi3usb9201: Add always powered flagAseda Aboagye2020-05-292-6/+21
* bc12: create bc12 driver structureTing Shen2020-05-299-42/+129
* SM5803: Update initsDiana Z2020-05-291-12/+12
* tusb422: Enable ADD before setting CCAbe Levkoy2020-05-291-1/+43
* driver/temp_sensor: fix tmp432 compile issueZick Wei2020-05-281-0/+4
* TCPM: Increase queue size for PD messagesAndrew McRae2020-05-271-1/+2
* Extend the tcpci register dump.Andrew McRae2020-05-273-88/+166
* BB retimer: Set 'active/passive' bit for USB modeAyushee2020-05-271-3/+4
* BB retimer: For USB/DP/USB4, set 'Re-timer_Driver' bit based on SOP' VDO2Ayushee2020-05-271-4/+18
* BB retimer: Refactor TBT retimer bitsAyushee2020-05-271-53/+84
* Virtual Mux: Send host events regardless of cached virtual mux stateAyushee2020-05-271-4/+2
* tcpmv2: Change AutoDischargeDisconnect for PR SwapDenis Brockus2020-05-261-7/+11
* USB: Fix handling of CONFIG_COMMON_RUNTIMEJan Dabros2020-05-261-0/+5
* BB retimer: Refactor 'Active/Passive' bitAyushee2020-05-211-17/+37
* TCPMv2: Only include PD3.0 functionality when CONFIG_USB_PD_REV30Sam Hurst2020-05-211-2/+1
* BB retimer: Add 'USB3_Speed' bitAyushee2020-05-212-0/+9
* BB retimer: Add 'USB2_connection' bitVijay Hiremath2020-05-212-11/+48
* pi3hdx1204: Allow tuning to be adjusted.David Huang2020-05-212-5/+63
* tcpci: manual Safe0V when check_vbus_level only when neededDenis Brockus2020-05-201-16/+17
* tcpci: Fix corruption of cached VBUS state during cold bootKeith Short2020-05-201-56/+67
* Driver : Read GPU temperature in S0.loganliao2020-05-201-1/+7
* tcpc: Cleanup register dumpKeith Short2020-05-201-42/+149
* BB retimer: Update Bit 12Ayushee2020-05-192-9/+0
* tcpmv2: use tcpci safe0v alert for auto dischargeDenis Brockus2020-05-191-9/+38
* tcpc: AutoDischarge can be enabled on any connection wakeDenis Brockus2020-05-193-18/+9
* tcpci: cache rx_en on disables as well as enablesDenis Brockus2020-05-191-3/+5
* SM5803: Enable trickle chargingDiana Z2020-05-152-51/+61
* tcpc: Add framework for Safe0V VBus Level checkingDenis Brockus2020-05-155-13/+89
* tcpc: change name of get_vbus_level to check_vbus_levelDenis Brockus2020-05-1513-27/+30
View Lorry Controller Status