summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* anx7447: Add mux registers to register dumpAndrew McRae2020-07-281-0/+15
* AOZ1380: initialize srcing/snking flags to reflect hardwareDenis Brockus2020-07-285-0/+64
* driver/tcpm/ps8xxx: Consistent DCI disable methodDevin Lu2020-07-281-46/+19
* usb_mux: Retain mux's power state on readAyushee2020-07-241-3/+14
* ps8743: use register control HPDZick Wei2020-07-242-2/+5
* Revert "TCPCI: Check for failed i2c write before using alert register"Wu-Cheng Li2020-07-241-4/+1
* TCPCI: Check for failed i2c write before using alert registerDiana Z2020-07-241-1/+4
* zork: Restore AP mux setting after rebootEdward Hill2020-07-242-0/+52
* SM5803: Enable Vbus monitor when sourcingDiana Z2020-07-232-1/+23
* driver/tcpm: add support for PS8755Devin Lu2020-07-233-8/+19
* chip/it8320, it81202: Implement fast role swap functionRuibin Chang2020-07-233-0/+110
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
* ps8805: Follow the sequence to enable the DCI register accessWai-Hong Tam2020-07-211-4/+23
* sm5803: Set precharge termination thresholdAseda Aboagye2020-07-212-0/+28
* sm5803: Use VBUS ADCs for VBUS presenceAseda Aboagye2020-07-211-5/+6
* sm5803: Update charge procedure for new SiAseda Aboagye2020-07-212-4/+51
* OCPC: Calculate system & battery resistanceAseda Aboagye2020-07-211-9/+10
* battery: Expose battery_manufacture_date() as APIWai-Hong Tam2020-07-214-0/+20
* retimer/tusb544: set the HPD pin for DP/Dock modeDivagar Mohandass2020-07-181-3/+7
* battery: Fix obtaining battery manufacture dateWai-Hong Tam2020-07-171-5/+5
* zork: Use CBI only and remove retimer probe codeDenis Brockus2020-07-174-35/+0
* SM5803: Update initsDiana Z2020-07-171-0/+9
* syv682X: Add support for FRSEric Herrmann2020-07-171-9/+105
* USB PD: Move board FRS configuration out of TCPCIEric Herrmann2020-07-171-6/+1
* driver/tcpm: set PD_EVENT_RX_HARD_RESET event when receive hard resetRuibin Chang2020-07-144-10/+7
* raa489000: Add instantaneous curr/volt readingsAseda Aboagye2020-07-142-1/+25
* raa489000: Reset BFET to normal during initAseda Aboagye2020-07-141-0/+12
* TCPCI: Update alert mask to allow FRS alertsEric Herrmann2020-07-141-0/+3
* OCPC: Use enum chg_id valuesDiana Z2020-07-111-10/+10
* Charger: Add dynamic charger chip countDiana Z2020-07-111-1/+1
* SM5803: Only enable auto charge when battery is connectedDiana Z2020-07-101-1/+1
* SM5803: Add 2S battery initsDiana Z2020-07-101-0/+34
* SM5803: Update 3S initsDiana Z2020-07-101-1/+2
* bmi260: Add support for using compressed configKeith Short2020-07-101-11/+190
* TCPM driver: Add prototype for tcpm frs enableEric Herrmann2020-07-091-16/+18
* Revert "TCPMv2: make sure Vbus is not sourced in AttachWait.SRC"Denis Brockus2020-07-081-10/+0
* TCPMv2: manual control to DBG_ACC in TCPCDenis Brockus2020-07-084-0/+18
* tcpci: Set TCPC_REG_TCPC_CTRL_DEBUG_ACC_CONTROLEdward Hill2020-07-082-6/+14
* TUSB422: Add support for FRSEric Herrmann2020-07-073-5/+62
* SYV682X: Add 100ms source current limit deglitchEric Herrmann2020-07-071-61/+84
* usbc: only try to use ppc_set_frs_enable if it existsPeter Marheine2020-07-061-0/+2
* mt6360: implement led driverTing Shen2020-07-022-0/+48
* ppc: string de-duplicationKeith Short2020-07-024-42/+41
* TCPMv2: make sure Vbus is not sourced in AttachWait.SRCDenis Brockus2020-07-011-0/+10
* bb_retimer: add power up timingKeith Short2020-07-012-3/+25
* tcpm: allow returning a status from set_frs_enablePeter Marheine2020-07-011-2/+5
* driver: bmi160: Increase the deadline for gyro calibrationInno.Park2020-06-301-3/+19
* driver/bc12: implement mt6360 driverTing Shen2020-06-293-0/+215
* ps8xxx: patch ps8815 A1 chip Device IDCaveh Jalali2020-06-292-3/+45
* ps8xxx: add helper function to access alternate I2C pagesCaveh Jalali2020-06-292-6/+6
View Lorry Controller Status