summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* PS874x: Split PS8740 and PS8743Edward Hill2020-04-167-272/+424
* nct38xx: handle TCPCI faultsDenis Brockus2020-04-162-24/+63
* ps8743: fix ps874_read/write for board accessDavid Huang2020-04-152-4/+6
* raa489000: Fix get_input_current()Aseda Aboagye2020-04-152-2/+15
* charger: Add chgnum arg to charger_get_input_currentAseda Aboagye2020-04-151-1/+1
* TCPC: On CC Alerts, only send CC Events after reading cc statusSam Hurst2020-04-121-2/+20
* SM5803: Add open drain parameter to GPIO setupDiana Z2020-04-102-2/+7
* ps8742: Add support of PS8742 Type-C SS/DP demuxWai-Hong Tam2020-04-102-2/+19
* syv682x: Create interrupt handlerEric Herrmann2020-04-082-1/+153
* config: Rename CONFIG_I2C_PASSTHROUGH to CONFIG_SB_PASSTHROUGHEdward Hill2020-04-081-1/+1
* it83xx/gpio: disable unused cc port moduleRuibin Chang2020-04-071-0/+4
* tcpm/anx7447.c: use chip internal timer to generate HPD IRQstabilize-sylas-13019.B-masterXin Ji2020-04-022-10/+31
* tcpm/it83xx_pd: cc1 and cc2 resistance setting separateRuibin Chang2020-03-301-0/+4
* tcpmv2: reduce zork specific auto discharge disconnect codeDenis Brockus2020-03-284-131/+0
* driver: lis2ds12: Add driver supportMario Tesi2020-03-273-0/+550
* SM5803: Clear Vbus source bits when setting charge modeDiana Z2020-03-261-10/+6
* zork: undo revert for zork on AutoDischargeDisconnectDenis Brockus2020-03-264-8/+202
* Revert "tcpmv2: cleanup auto discharge disconnect"Aseda Aboagye2020-03-264-169/+105
* SM5803: Configure lower TINT thresholdDiana Z2020-03-262-10/+30
* SM5803: OTG, charger detect, and interrupt functionalityDiana Z2020-03-232-6/+178
* Charger: Add driver function for sourcing OTGDiana Z2020-03-212-7/+2
* nct38xx: Remove ioexpander_nct38xx.hEdward Hill2020-03-204-35/+19
* max14637: Modify driver to have chip_enable active by defaultScott Collyer2020-03-201-21/+48
* tcpci: remove cached pullDenis Brockus2020-03-205-42/+1
* tcpmv2: cleanup auto discharge disconnectDenis Brockus2020-03-204-105/+169
* driver: fix ina219 shunt voltage calculationVirendra Kakade2020-03-201-2/+2
* USB-C: Determine port partner's data role based on PD's data roleVijay Hiremath2020-03-191-3/+4
* driver/tcpm/it83xx: set cc polarity correctlyRuibin Chang2020-03-181-1/+5
* anx7447.c: anx7447/anx3447 has an additional condition(0xAA:bit6) for Look4co...Xin Ji2020-03-162-2/+41
* ISL923x: Accept charger chip for prochot functionsDiana Z2020-03-162-6/+7
* TUSB544: Add driver structure declarationDiana Z2020-03-162-20/+22
* SM5803: Initial driverDiana Z2020-03-163-0/+625
* PS8751: Disallow running with PD 3.0Diana Z2020-03-141-0/+9
* tusb422: Fix DRP auto toggleKeith Short2020-03-131-2/+21
* Mushu : Add GPU temperature sensor driverloganliao2020-03-133-0/+97
* raa489000: Choose charge port if VBUS present @ initAseda Aboagye2020-03-121-0/+16
* variant trembyle: use fw_config for mux initializationDenis Brockus2020-03-124-0/+5
* driver: bma2x2: Fix frequency precision errorGwendal Grignou2020-03-101-8/+10
* driver: l3gd20h: Fix maximal ODRGwendal Grignou2020-03-101-1/+2
* driver: lis2dw12: Fix maximal ODRGwendal Grignou2020-03-101-1/+3
* driver: bmi160: Fix ODR to REG when rate is less than 100Hz properlyGwendal Grignou2020-03-091-1/+1
* driver/fingerprint: Clarify FPC 1145 hardware IDTom Hughes2020-03-091-1/+7
* bq25710: Do not soft reset when running out of RW imageScott Collyer2020-03-091-14/+19
* Revert "Ampton: Set the PS8751 to source mode before enter low power mode"Matthew Blecker2020-03-074-34/+1
* driver/tcpm: fix incorrect pd message enum namesTing Shen2020-03-062-4/+4
* nb7v904m: Fix bug with CHIP_EN polarityAseda Aboagye2020-03-061-2/+2
* driver/tcpm/it8xxx2: fix incorrect function prototypeTing Shen2020-03-051-2/+6
* pcal6408: add ioexpander driverPaul Ma2020-03-053-0/+397
* bb_retimer: Set Data_Connection_Present bit in Safe modeVijay Hiremath2020-03-051-0/+1
* kodama: rewrite charger CHG_CTRL1 registerxiong.huang2020-03-021-0/+2
View Lorry Controller Status