summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* retimer: framework cleanup for chip specific control configDenis Brockus2020-01-164-16/+39
* ps8xxx: Add workaround for PS8751 FW ver 0x44.Tim Wawrzynczak2020-01-151-1/+32
* syv682x: fix status register readCaveh Jalali2020-01-141-1/+4
* bq25710: Ensure low power mode is disabled when reading reg 0x3EScott Collyer2020-01-141-2/+17
* Waddledoo: Add sensor supportDiana Z2020-01-141-0/+1
* rt946x: reduce DB and BL driving capacityAllen Chiang2020-01-142-0/+57
* ps8xxx: add support for the ps8815Caveh Jalali2020-01-143-7/+24
* ps8802: use hardware pin for IN_HPDDenis Brockus2020-01-141-2/+1
* RAA489000: Add TCPC driverDiana Z2020-01-113-0/+97
* anx7447: Fix CC and polarity settingsTim Wawrzynczak2020-01-101-3/+30
* TCPMv1: Correct the TBT3 Discovery and Entry FlowVijay Hiremath2020-01-101-3/+3
* USB_MUX: correct setting the retimer dataVijay Hiremath2020-01-091-90/+118
* pd: cleanup pd_get_roleDenis Brockus2020-01-091-1/+1
* aoz1380: ignore false positive over current/tempDenis Brockus2020-01-091-8/+49
* tcpci: nct38xx: make get cc standard under tcpciDenis Brockus2020-01-082-41/+48
* tcpci: Only drive one CC line when attachedDenis Brockus2020-01-089-180/+225
* driver/usb_mux: Make pi3usb30532 more genericAseda Aboagye2020-01-084-97/+102
* bloonchipper: Add transport and sensor detectionTom Hughes2020-01-081-0/+7
* driver: lsm6dsm: Implement temperature readingYuval Peress2020-01-032-0/+18
* driver: bmi160: Implement temperature readingYuval Peress2020-01-021-0/+6
* drivers/tcs3400: don't apply zero scale.Jongpil Jung2019-12-271-0/+4
* jacuzzi: enable ledTing Shen2019-12-272-1/+145
* retimer: Add PS8802 driverEdward Hill2019-12-263-0/+103
* driver/usb_mux: add ANX7440 USB Type-C mux driverDivagar Mohandass2019-12-243-0/+147
* rt946x: polish charger log formatEric Yilun Lin2019-12-241-5/+6
* kodama: overwrite bad battery params to known good valueTing Shen2019-12-231-0/+1
* retimer: Add PS8818 driverEdward Hill2019-12-203-0/+69
* charger/rt946x: support AC state detectionEric Yilun Lin2019-12-201-0/+21
* rt946x: add missing new line in console logTing Shen2019-12-181-1/+1
* rt946x: reduce log infoEric Yilun Lin2019-12-181-46/+18
* Burnside bridge retimer: Add Thunderbolt-compatible mode bitsAyushee2019-12-172-12/+88
* TCPMv1: Add support for Thunderbolt-compatible modeAyushee2019-12-172-3/+4
* charger/rt946x: expose rt946x_get_adcYilun Lin2019-12-172-10/+19
* ISL9241: Change register settings for OCPEric Herrmann2019-12-141-3/+1
* bma2x2: Add an assert that verifies the mutexKeith Short2019-12-131-0/+3
* drivers/tcs3400: don't add offset for LUXNick Vaccaro2019-12-121-2/+23
* drivers/tcs3400: add IR scaling factorNick Vaccaro2019-12-122-9/+15
* nct38xx: Set pull on both CC lines on disconnectEdward Hill2019-12-121-1/+30
* nct38xx: Add tcpci_nct38xx_select_rp_valueEdward Hill2019-12-121-1/+7
* tcpci: change connect to auto discharge disconnectDenis Brockus2019-12-125-33/+28
* usb_pd: Get current DP pin modeVijay Hiremath2019-12-111-1/+1
* pi3usb9201: use i2c field update common functionDenis Brockus2019-12-101-18/+4
* isl9241: use i2c update for read/modify/writeDenis Brockus2019-12-101-42/+25
* nct38xx: Use common tcpci set_polarityDenis Brockus2019-12-101-15/+1
* tcpci: tcpci_tcpm_set_polarity should not clobberDenis Brockus2019-12-101-2/+4
* nct38xx: change rmw operations to use i2c updateDenis Brockus2019-12-101-17/+14
* tcpci: add tcpc_update routines for read/mod/writeDenis Brockus2019-12-102-56/+69
* tcpci: add command to dump standard TCPCI registersKeith Short2019-12-091-0/+89
* fusb302: implement vbus measurement using tcpcTing Shen2019-12-092-0/+62
* charger/rt946x: fix updating CHARGE_SUPPLIER_NONEEric Yilun Lin2019-12-091-1/+2
View Lorry Controller Status