summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* nct38xx: hard disable sinking when cc is set to open/openDenis Brockus2020-08-041-1/+33
* driver/bc12: mt6360: Add ldo regulator controls.Pi-Hsun Shih2020-08-042-0/+260
* driver: bma253: use rotation matrix to handle offsetsJian-Jia Su2020-08-041-2/+11
* SM5803: Disable Ibus PROCHOT comparator in initDiana Z2020-08-011-4/+8
* sm5803: Add charger_dump console commandAseda Aboagye2020-07-311-0/+34
* sm5803: Update driver with latest initsAseda Aboagye2020-07-311-4/+10
* Reland "TCPCI: Check for failed i2c write before using alert register"Diana Z2020-07-311-1/+4
* BB retimer: Set USB3 speed only when USB mode is enabledAyushee2020-07-311-8/+9
* chip/it83xx, it8xxx2: implement detect cc disconnection interrupt for SRC roleRuibin Chang2020-07-313-16/+157
* anx7447: Add mux registers to register dumpAndrew McRae2020-07-281-0/+15
* AOZ1380: initialize srcing/snking flags to reflect hardwareDenis Brockus2020-07-285-0/+64
* driver/tcpm/ps8xxx: Consistent DCI disable methodDevin Lu2020-07-281-46/+19
* usb_mux: Retain mux's power state on readAyushee2020-07-241-3/+14
* ps8743: use register control HPDZick Wei2020-07-242-2/+5
* Revert "TCPCI: Check for failed i2c write before using alert register"Wu-Cheng Li2020-07-241-4/+1
* TCPCI: Check for failed i2c write before using alert registerDiana Z2020-07-241-1/+4
* zork: Restore AP mux setting after rebootEdward Hill2020-07-242-0/+52
* SM5803: Enable Vbus monitor when sourcingDiana Z2020-07-232-1/+23
* driver/tcpm: add support for PS8755Devin Lu2020-07-233-8/+19
* chip/it8320, it81202: Implement fast role swap functionRuibin Chang2020-07-233-0/+110
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
* ps8805: Follow the sequence to enable the DCI register accessWai-Hong Tam2020-07-211-4/+23
* sm5803: Set precharge termination thresholdAseda Aboagye2020-07-212-0/+28
* sm5803: Use VBUS ADCs for VBUS presenceAseda Aboagye2020-07-211-5/+6
* sm5803: Update charge procedure for new SiAseda Aboagye2020-07-212-4/+51
* OCPC: Calculate system & battery resistanceAseda Aboagye2020-07-211-9/+10
* battery: Expose battery_manufacture_date() as APIWai-Hong Tam2020-07-214-0/+20
* retimer/tusb544: set the HPD pin for DP/Dock modeDivagar Mohandass2020-07-181-3/+7
* battery: Fix obtaining battery manufacture dateWai-Hong Tam2020-07-171-5/+5
* zork: Use CBI only and remove retimer probe codeDenis Brockus2020-07-174-35/+0
* SM5803: Update initsDiana Z2020-07-171-0/+9
* syv682X: Add support for FRSEric Herrmann2020-07-171-9/+105
* USB PD: Move board FRS configuration out of TCPCIEric Herrmann2020-07-171-6/+1
* driver/tcpm: set PD_EVENT_RX_HARD_RESET event when receive hard resetRuibin Chang2020-07-144-10/+7
* raa489000: Add instantaneous curr/volt readingsAseda Aboagye2020-07-142-1/+25
* raa489000: Reset BFET to normal during initAseda Aboagye2020-07-141-0/+12
* TCPCI: Update alert mask to allow FRS alertsEric Herrmann2020-07-141-0/+3
* OCPC: Use enum chg_id valuesDiana Z2020-07-111-10/+10
* Charger: Add dynamic charger chip countDiana Z2020-07-111-1/+1
* SM5803: Only enable auto charge when battery is connectedDiana Z2020-07-101-1/+1
* SM5803: Add 2S battery initsDiana Z2020-07-101-0/+34
* SM5803: Update 3S initsDiana Z2020-07-101-1/+2
* bmi260: Add support for using compressed configKeith Short2020-07-101-11/+190
* TCPM driver: Add prototype for tcpm frs enableEric Herrmann2020-07-091-16/+18
* Revert "TCPMv2: make sure Vbus is not sourced in AttachWait.SRC"Denis Brockus2020-07-081-10/+0
* TCPMv2: manual control to DBG_ACC in TCPCDenis Brockus2020-07-084-0/+18
* tcpci: Set TCPC_REG_TCPC_CTRL_DEBUG_ACC_CONTROLEdward Hill2020-07-082-6/+14
* TUSB422: Add support for FRSEric Herrmann2020-07-073-5/+62
* SYV682X: Add 100ms source current limit deglitchEric Herrmann2020-07-071-61/+84
* usbc: only try to use ppc_set_frs_enable if it existsPeter Marheine2020-07-061-0/+2
View Lorry Controller Status