summaryrefslogtreecommitdiff
path: root/extra
Commit message (Collapse)AuthorAgeFilesLines
...
* cr50_rma_open: port to python 3Mary Ruthven2020-02-141-43/+50
| | | | | | | | | | | | BUG=b:149405690 BRANCH=none TEST=run with python3 Change-Id: I42bcccec83c7c582450c0b599f46b3fbf0ab3f80 Signed-off-by: Mary Ruthven <mruthven@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2052268 Reviewed-by: Mike Frysinger <vapier@chromium.org> Reviewed-by: Wai-Hong Tam <waihong@google.com>
* c2d2: initial c2d2 addJett Rink2020-01-302-1/+16
| | | | | | | | | | | | | | | | | C2D2 is a debug board bring that uses an 8-pin debug header that is pin compatible with the em100 flash emulator. BRANCH=none BUG=b:145314772 TEST=UART communication for EC and H1 TEST=UART flashing of EC TEST=SPI reading and writing TEST=Automatic Vref detection for UART upon connect and disconnect Change-Id: I023994ed78942f2307e4adb802b5cc96afdf7e24 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1991849 Reviewed-by: Diana Z <dzigterman@chromium.org>
* tigertool: fix regexNick Sanders2020-01-181-1/+1
| | | | | | | | | | | | | | Change $ to \s in regex. BUG=None (tigertail serserialno fail TEST=./tigertool.py --setserialno test BRANCH=none Change-Id: I006ff8e70b3d20be44590c2050f9e341f10a2d53 Signed-off-by: Nick Sanders <nsanders@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2008450 Reviewed-by: YH Lin <yueherngl@chromium.org> Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* i2c-pseudo: Fix data byte separator in multi-byte I2C_XFER_REPLY example.Matthew Blecker2020-01-111-1/+1
| | | | | | | | | | | | BRANCH=none BUG=none TEST=none Change-Id: Ibe34f5cb4e0dfe3a2aed70dec9de12d4b064ca89 Signed-off-by: Matthew Blecker <matthewb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1995607 Reviewed-by: Harry Cutts <hcutts@chromium.org> Commit-Queue: Harry Cutts <hcutts@chromium.org>
* i2c-pseudo: Fix second example I2C transaction in Documentation.txtMatthew Blecker2019-12-171-2/+2
| | | | | | | | | | | | BRANCH=none BUG=none TEST=none Change-Id: I3fcdfb065e5d2534e6ebcfb7cdd7d60401c8cce1 Signed-off-by: Matthew Blecker <matthewb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1968205 Reviewed-by: Harry Cutts <hcutts@chromium.org> Commit-Queue: Harry Cutts <hcutts@chromium.org>
* cr50_rma_open: only disable timestamps with servodMary Ruthven2019-12-101-2/+5
| | | | | | | | | | | | | | | | cr50_rma_open can be run without servod. dut-control cr50_uart_timestamp:off fails if the script isn't running through servod. This change moves disabling timestamps, so it's only done on servod. BUG=none BRANCH=none TEST=run with and withoout servod Change-Id: Icc80d021dd7cbad8ae3632625b32b30368e5a94c Signed-off-by: Mary Ruthven <mruthven@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1960919 Reviewed-by: Evan Green <evgreen@chromium.org>
* gsctool: add 'force_ro' optionVadim Bendebury2019-12-072-2/+12
| | | | | | | | | | | | | | | | | | | | | | By design gsctool does not update the inactive RO unless the running RO version is lower than the version in the Cr50 image being transferred. With transition to the new RO version, keys and rollback map state, there is a need to enforce that both ROs on the device are updated. This patch adds a command line option which allows to update the inactive RO to the contents of the Cr50 image. BRANCH=none BUG=b:136284186 TEST=running 'gsctool -q cr50.bin' updates the inactive RO section. Change-Id: I79c21fc2cd41c40070352d8fbce0b71dd3ae2b1f Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1949547 Reviewed-by: Namyoon Woo <namyoon@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org>
* cr50_rma_open: Disable UART timestampsEvan Green2019-12-071-1/+2
| | | | | | | | | | | | | | | | | The log timestamps are unexpected by the script, and cause issues. Send a dut-control command to disable UART timestamps. Also fix the regex in the board ID portion to accept a colon as well as a comma, whichever comes first. BUG=None TEST=Try cr50_rma_unlock.py BRANCH=None Change-Id: Ie9e54e65b86c52aef120fa3249453bfc090cf6f0 Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1921703 Reviewed-by: Mary Ruthven <mruthven@chromium.org>
* ec: remove entering_mode host commandJoel Kitching2019-12-061-1/+0
| | | | | | | | | | | | | | | | | After this host command is called, the value is stored in g_vboot_mode and never accessed again. BUG=b:124141368, chromium:1014379 TEST=make buildall -j BRANCH=none Change-Id: I7923658139d15394c1c3c07baca7168e34c111e9 Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1830239, chromium:1864533 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1865050 Tested-by: Joel Kitching <kitching@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Commit-Queue: Joel Kitching <kitching@chromium.org>
* gsctool: delay RO update for old cr50 imagesMary Ruthven2019-11-221-0/+35
| | | | | | | | | | | | | | | | If Cr50 is running older than 0.3.20, delay the RO update 1 minute after the RW update, so Cr50 doesn't reject the RO blocks because their offsets are less than the RW offsets. BUG=b:144873413 BRANCH=none TEST=update board running RO 0.0.10 RW 0.3.18 to the RO 0.0.11 RW 0.3.22 image. Change-Id: I0179cc235c692133b08cd3430d71069b2f94bf69 Signed-off-by: Mary Ruthven <mruthven@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1929481 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
* extra/touchpad_updater: Various fixups (cross-compile, new chip)Nicolas Boichat2019-11-152-12/+22
| | | | | | | | | | | | | | | | | | | | | | | | This fixes a few issues in touchpad_updater, that is used only for early bringup by Elan: - Fix Makefile to correctly cross-compile - Add support for 0x10 IC - Improve debugging - Remove manual fragmentation of USB bulk packets (this is not required and actually breaks large transactions) - Add timeout to libusb_bulk_transfer calls. BRANCH=kukui BUG=b:142333653 TEST=emerge-kukui -v ec-devutils && \ scp /build/kukui/usr/sbin/ec_touchpad_updater $IP:/usr/local/sbin Ping-pong between 2 images: ec_touchpad_updater -p 0x503c -f S8648A-15H0_FW01.bin ec_touchpad_updater -p 0x503c -f S8648A-15H0_FWB1.bin Change-Id: I78a8064002504ba4db15e202e516e7a2399bf648 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1906393 Reviewed-by: Eric Yilun Lin <yllin@chromium.org>
* board/hammer: Fix masterball touchpad settingsNicolas Boichat2019-10-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Fix the dimensions, and also the size, and make sure that updating the FW actually works (it seems like increasing the timeout to 2000ms is needed). BRANCH=kukui BUG=b:140596094 TEST=Flash masterball, no warning in console on start TEST= Host: make TOUCHPAD_FW=S8648A-15H0_FW01.bin BOARD=masterball -j USE=updater_utils emerge-kukui -av ec-utils cros deploy $IP ec-utils DUT: usb_updater2 -d 18d1:503c -r; sleep 0.5; \ usb_updater2 -d 18d1:503c -s; usb_updater2 -d 18d1:503c ec.bin usb_updater2 -d 18d1:503c -p S8648A-15H0_FW01.bin Change-Id: Ia473ac420b42f52ad1639f950a3f08ff5d32df09 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1847512 Reviewed-by: Eric Yilun Lin <yllin@chromium.org> Reviewed-by: Joel Kitching <kitching@chromium.org>
* printf: Enable compile-time format checkingEvan Green2019-10-051-0/+1
| | | | | | | | | | | | | | | Add annotations to allow the compiler to check printf-style format strings in the EC. BUG=chromium:984041 TEST=make -j buildall BRANCH=None Change-Id: Ic39f37f8362372de7d289becea684d9da535599a Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1733101 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* host_command: Change host command return value to enum ec_statusTom Hughes2019-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the host command handler callback function returns an int, it's easy to accidentally mix up the enum ec_error_list and enum ec_status types. The host commands always expect an enum ec_status type, so we change the return value to be of that explicit type. Compilation will then fail if you accidentally try to return an enum ec_error_list value. Ran the following commands and then manually fixed up a few remaining instances that were not caught: git grep --name-only 'static int .*(struct host_cmd_handler_args \*args)' |\ xargs sed -i 's#static int \(.*\)(struct host_cmd_handler_args \*args)#\ static enum ec_status \1(struct host_cmd_handler_args \*args)##' git grep --name-only 'int .*(struct host_cmd_handler_args \*args)' |\ xargs sed -i 's#int \(.*\)(struct host_cmd_handler_args \*args)#\ enum ec_status \1(struct host_cmd_handler_args \*args)##' BRANCH=none BUG=chromium:1004831 TEST=make buildall -j Cq-Depend: chrome-internal:1872675 Change-Id: Id93df9387ac53d016a1594dba86c6642babbfd1e Signed-off-by: Tom Hughes <tomhughes@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1816865 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
* Unify #! use in python scriptsStefan Reinauer2019-10-019-9/+9
| | | | | | | | | | | | | | | | | | Right now we have several different versions of #! in our python scripts. Unify them all and specify that we are using python2. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> BUG=none BRANCH=none TEST=make buildall Change-Id: Iab33a3f5d4b827451a55542bcee8837b00da7867 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1817948 Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
* i2c-pseudo: Minor documentation fixes and clarifications.Matthew Blecker2019-09-271-8/+12
| | | | | | | | | | | BRANCH=none BUG=none TEST=Viewed the updated file in Gitiles. Change-Id: Icd10a54500a2521e4d598997385916d59dd38ab3 Signed-off-by: Matthew Blecker <matthewb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1827239 Reviewed-by: Justin TerAvest <teravest@chromium.org>
* servo_updater: enable paths to work on test images as wellRuben Rodriguez Buchillon2019-08-221-4/+34
| | | | | | | | | | | | | | | | | | | | | | | This change adds some logic to find config and firmware files on test images as well, where they end up being located at /usr/local/share instead. BUG=b:120921028 BRANCH=None TEST=manual testing // on fizz-labstation test image sudo servo_updater --board servo_v4 observe servo v4 getting updated Note: Test images right now do not have usb_updater2 yet (WIP) hence the test is done using fizz-labstation, a board that does come with usb_updater2 Change-Id: I4838424ed17bad5c3e2911cb967193863cd0b231 Signed-off-by: Ruben Rodriguez Buchillon <coconutruben@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1760974 Reviewed-by: Nick Sanders <nsanders@chromium.org> Reviewed-by: Todd Broch <tbroch@chromium.org>
* usb_updater2: fix compiler warningRuben Rodriguez Buchillon2019-08-221-1/+1
| | | | | | | | | | | | | | | | | | The compiler complained about this, noting that error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]. This seems to fix it. BUG=b:120921028 BRANCH=None TEST=manual testing sudo emerge ec-devutils -j32 // warning disappears Change-Id: I4a4392ec7e6bc7af06dc54b6382e52a1f2c91252 Signed-off-by: Ruben Rodriguez Buchillon <coconutruben@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1761467 Reviewed-by: Nick Sanders <nsanders@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
* gsctool: print devid in image version outputMary Ruthven2019-08-131-0/+24
| | | | | | | | | | | | | | | If the image is node locked to a devid, print that information in the '-b' output. BUG=none BRANCH=none TEST=get version output of node locked and prod signed image. Change-Id: I0db2828d7bd699013ec84467c7e2a4b918bd7b27 Signed-off-by: Mary Ruthven <mruthven@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1742913 Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
* gsctool: add support for endorsement seed vcMary Ruthven2019-08-131-3/+85
| | | | | | | | | | | | | | | Add support for getting and setting the endorsement key using the vendor command. BUG=b:138943966 BRANCH=none TEST=Get/Set endorsement seed using vendor command. Change-Id: I5c2f5d9efa0fbc236731430cac650785693c8db8 Signed-off-by: Mary Ruthven <mruthven@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1740076 Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
* gsctool: make options mutually exclusiveMary Ruthven2019-08-131-2/+3
| | | | | | | | | | | | | | | | Fix the mutually exclusive check, so using 2 raises an error. Also fix the error message to show -U instead of -u. Upstart isn't exclusive. CCD unlock is. BUG=none BRANCH=none TEST=gsctool -i -U raises an error. Change-Id: Iaf43f18fefc1a8c4b6612b05daa5c82a7680b310 Signed-off-by: Mary Ruthven <mruthven@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1742220 Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
* LICENSE: remove unnecessary (c) after CopyrightTom Hughes2019-06-198-8/+8
| | | | | | | | | | | | | | | | Ran the following command: git grep -l 'Copyright (c)' | \ xargs sed -i 's/Copyright (c)/Copyright/g' BRANCH=none BUG=none TEST=make buildall -j Change-Id: I6cc4a0f7e8b30d5b5f97d53c031c299f3e164ca7 Signed-off-by: Tom Hughes <tomhughes@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1663262 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
* ec-devutils: restore servo_updater functionalityKevin Shelton2019-06-052-0/+6
| | | | | | | | | | | | | | | | | | Adds back and uses the close method that was defined in change 1125354. BRANCH=None BUG=chromium:968700 TEST=ran servo updater on a servo that needed an update (so that the version check was exercised twice). Signed-off-by: Kevin Shelton <kmshelton@chromium.org> Change-Id: I0ddce9749a3548d5019c138a2a2266fd93a85ca9 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1643658 Tested-by: Kevin Shelton <kmshelton@chromium.org> Reviewed-by: Nick Sanders <nsanders@chromium.org> Commit-Queue: Kevin Shelton <kmshelton@chromium.org>
* gsctool: process intermittent flash log retrieval errorsVadim Bendebury2019-06-041-12/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Flash log access could be denied in case there is a previously started log operation in progress. Flash log by design is a 'the best effort' facility, let's re-try a few times if Cr50 returns an error when flash log read is attempted. Also, allow the -L optional parameter to be a decimal value, this is better aligned with the output format where timestamp is reported as a decimal value. BRANCH=none BUG=b:132287488 TEST=ran two concurrent processes, one constantly adding flash log entries using Cr50 console command, and another one constantly retrieving entries using 'gsctool -a -L' observed reliable operation over long periods of time, with occasional flash log lockup log entries reported by the Cr50 (as expected). - verified proper operation when a decimal value is passed in as a -L optional parameter. Change-Id: I4510490c73d616e0d84776f483b9ee7bf11bcbc3 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1639094 Reviewed-by: Andrey Pronin <apronin@chromium.org>
* gsctool: make more debug output availableVadim Bendebury2019-06-011-4/+4
| | | | | | | | | | | | | | This would allow to see up to 20 bytes of each packet sent to the TPM when -v command line option is passed to gsctool. BRANCH=none BUG=none TEST=ran 'gsctool -a -L -v' and observed expected traces. Change-Id: If0988e71a3856b2e213b906315651a84051317ce Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1639095 Reviewed-by: Andrey Pronin <apronin@chromium.org>
* ec-devutils: update for pyusb-1.0.2Nick Sanders2019-05-244-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pyusb 1.0.2 changed two API calls upon which we depend: b3ee6cdfef8f find function returns an iterator. dac78933f6a6 Removed unnecessary length argument to util.get_string This CL only updates callers of these APIs (the previous CL contained some unrelated changes around kernel driver detach and closing stm32usb). Signed-off-by: Nick Sanders <nsanders@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Based-on: https://chromium-review.googlesource.com/1125354 BRANCH=None BUG=chromium:958677 TEST=precq passes TEST=chromiumos-sdk tryjob buildbucketId=8915374561970847360 TEST=using servo v2 servod -b grunt => no python exceptions when starting servod TEST=using servo v4 servod -b grunt => no python exceptions when starting servod TEST=using u-Servo: servod -b grunt => no python exceptions when starting servod for i in {1..10000} ; do echo $i $(dut-control ec_uart_en spi1_buf_en ); done => No stability regression versus pyusb-1.0.0b1 TEST=servo_updater, EC console via servo Cq-Depend: chromium:1597548,chromium:1597156,chromium:1597157 Change-Id: Ic8101707838e5d19e901cf1f7125b97b5102f089 Reviewed-on: https://chromium-review.googlesource.com/1597156 Commit-Ready: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Daniel Kurtz <djkurtz@chromium.org> Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Chris McDonald <cjmcdonald@chromium.org>
* gsctool: add ability to get/set flash log timestamp baseVadim Bendebury2019-05-241-1/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recently introduced vendor command is used to get or set flash log timestamp. BRANCH=none BUG=b:132287488 TEST=on the device ran various incarnations of the command (> prompt on the Cr50 console, # is the DUT bash): > flo 10 10 > flo 1:00 13:0a 0a 0b 0c 0d 0e 0f 10 11 12 13 ==== afger a few seconds ===== # /var/tmp/gsctool -a -T Current H1 time is 68 ==== afger some more time ===== > flo 5 5 > flo 1:00 13:0a 0a 0b 0c 0d 0e 0f 10 11 12 13 398:05 05 06 07 08 09 # /var/tmp/gsctool -a -T 300 error: return value 1 # /var/tmp/gsctool -a -T 1000000 > flo 6 6 > flo 1:00 13:0a 0a 0b 0c 0d 0e 0f 10 11 12 13 398:05 05 06 07 08 09 1000022:06 06 07 08 09 0a 0b # /var/tmp/gsctool -a -T Current H1 time is 1000052 Change-Id: I16ceb97a32b4d452705f9df3826151f3e4e45832 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1610721 Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org>
* gsctool: further optimize parameter descriptionVadim Bendebury2019-05-241-56/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to duplicate short and long option strings in the .opt and .help_text fields, one is enough. To properly format --help output in case the command line argument expects a parameter, part of the .help_text string has to be printed concatenated with the option strings. Let's retrieve the short and long option strings form from the .opt structure and use '%' as the formatting character to allow to indicate that the the beginning of the help message needs to be printed concatenated with the option strings. Also correct the general description. BRANCH=none BUG=none TEST=help text before this change: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv $ gsctool -h Usage: gsctool [options] [<binary image>] This utility allows to update Cr50 RW firmware, configure various aspects of Cr50 operation, analyze Cr50 binary images, etc. The required argument is the file name of a full RO+RW binary image. A typical Chromebook use would expect -s -t options included in the command line. Options: -a,--any Try any interfaces to find Cr50 (-d, -s, -t are all ignored) -b,--binvers Report versions of Cr50 image's RW and RO headers, do not update -c,--corrupt Corrupt the inactive rw -d,--device VID:PID USB device (default 18d1:5014) -f,--fwver Report running Cr50 firmware versions -F,--factory [enable|disable] Control factory mode -h,--help Show this message -I,--ccd_info Get information about CCD state -i,--board_id [ID[:FLAGS]] Get or set Info1 board ID fields ID could be 32 bit hex or 4 character string. -k,--ccd_lock Lock CCD -L,--flog [prev entry] Retrieve contents of the flash log (newer than <prev entry> if specified) -M,--machine Output in a machine-friendly way. Effective with -b, -f, -i, and -O. -m,--tpm_mode [enable|disable] Change or query tpm_mode -n,--serial SERIAL Cr50 CCD serial number -O,--openbox_rma <desc_file> Verify other device's RO integrity using information provided in <desc file> -o,--ccd_open Start CCD open sequence -P,--password Set or clear CCD password. Use 'clear:<cur password>' to clear it -p,--post_reset Request post reset after transfer -R,--sn_rma_inc RMA_INC Increment SN RMA count by RMA_INC. RMA_INC should be 0-7. -r,--rma_auth [auth_code] Request RMA challenge, process RMA authentication code -S,--sn_bits SN_BITS Set Info1 SN bits fields. SN_BITS should be 96 bit hex. -s,--systemdev Use /dev/tpm0 (-d is ignored) -T,--tstamp <stamp> Set flash log timestamp base -t,--trunks_send Use `trunks_send --raw' (-d is ignored) -U,--ccd_unlock Start CCD unlock sequence -u,--upstart Upstart mode (strict header checks) -V,--verbose Enable debug messages -v,--version Report this utility version -w,--wp Get the current wp setting ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ and after this change: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv $ ./extra/usb_updater/gsctool -h Usage: gsctool [options] [<binary image>] This utility allows to update Cr50 RW firmware, configure various aspects of Cr50 operation, analyze Cr50 binary images, etc. <binary image> is the file name of a full RO+RW binary image. Options: -a,--any Try any interfaces to find Cr50 (-d, -s, -t are all ignored) -B,--background_update_supported Force background update mode (relevant only when interacting with Cr50 versions before 0.0.19) -b,--binvers Report versions of Cr50 image's RW and RO headers, do not update -c,--corrupt Corrupt the inactive rw -d,--device VID:PID USB device (default 18d1:5014) -f,--fwver Report running Cr50 firmware versions -F,--factory [enable|disable] Control factory mode -h,--help Show this message -I,--ccd_info Get information about CCD state -i,--board_id [ID[:FLAGS]] Get or set Info1 board ID fields. ID could be 32 bit hex or 4 character string. -k,--ccd_lock Lock CCD -L,--flog [prev entry] Retrieve contents of the flash log (newer than <prev entry> if specified) -M,--machine Output in a machine-friendly way. Effective with -b, -f, -i, and -O. -m,--tpm_mode [enable|disable] Change or query tpm_mode -n,--serial Cr50 CCD serial number -O,--openbox_rma <desc_file> Verify other device's RO integrity using information provided in <desc file> -o,--ccd_open Start CCD open sequence -P,--password Set or clear CCD password. Use 'clear:<cur password>' to clear it -p,--post_reset Request post reset after transfer -R,--sn_rma_inc RMA_INC Increment SN RMA count by RMA_INC. RMA_INC should be 0-7. -r,--rma_auth [auth_code] Request RMA challenge, process RMA authentication code -S,--sn_bits SN_BITS Set Info1 SN bits fields. SN_BITS should be 96 bit hex. -s,--systemdev Use /dev/tpm0 (-d is ignored) -T,--tstamp [<tstamp>] Get or set flash log timestamp base -t,--trunks_send Use `trunks_send --raw' (-d is ignored) -U,--ccd_unlock Start CCD unlock sequence -u,--upstart Upstart mode (strict header checks) -V,--verbose Enable debug messages -v,--version Report this utility version -w,--wp Get the current wp setting ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Change-Id: I5afd2473dbdaf9edc515ee9f02b932effe3755c5 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1628113 Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org>
* gsctool: consolidate processing of optional parametersVadim Bendebury2019-05-241-29/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Standard libc getopt_long() and getopt() functions do not allow the optional parameters to follow the command line option without the equal sign ('='), but gsctool utility users expect this form to be available, so additional processing is done for command line arguments accepting optional parameters. This additional processing code is duplicated for each such argument. On top of that, some arguments which described as requiring the parameter (not optional) still include code which looks for the command line option. Information about expected parameter type is included in the long options descriptor table, so it is not readily available if the user specified the short version of the argument in the command line. To consolidate processing of the optional parameters in one place, in case the user specified the short version of the command line argument, the long_opts table is looked up to find the appropriate long version, then the parameter type is checked, and if the parameter is supposed to be optional, the next command line token is examined to determine if this is the optional parameter. BRANCH=none BUG=none TEST=tried the following commands: - tried the following commands: ./extra/usb_updater/gsctool -b # reports missing file name error # All the following succeed processing command line parameters: ./extra/usb_updater/gsctool -m ./extra/usb_updater/gsctool -m enable ./extra/usb_updater/gsctool --tpm_mode enable ./extra/usb_updater/gsctool --tpm_mode=enable # All the following fail processing command line parameters # reporting 'Invalid tpm mode arg: xxx.': ./extra/usb_updater/gsctool -m xxx ./extra/usb_updater/gsctool --tpm_mode xxx ./extra/usb_updater/gsctool --tpm_mode=xxx Change-Id: I68e9cc312aa8a5a2cccbd78df66a24ac71f78c36 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1621185 Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org>
* gsctool: refactor command line arguments processingVadim Bendebury2019-05-241-89/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a couple of issues with command line processing code: - command line options must be listed in two different places if we want to allow both short and long forms of the same argument - help text for commands is included in yet another place in the code Indeed, from the libc getopt_long() point of view the long options table and short options string are completely unrelated: the function scans the command line arguments vector for -x[x[y]] or --word command line options style and looks up either short_opts or long_opts depending on the encountered command line token's style. The standard way to cross reference long options table and the short options string is to put the short option character in the long option table's entries .val field. This is how it is done in gsctool. What this means is that as long as all short command options are referenced in the long_opts table, the short command option string could be generated based no the long_opts table. The help text and long_opts table would still remain separate and require manual syncing. To help with that problem this patch introduces a container structure, which includes both long option contents and the help text for each command line option. This allows to build the long_opts table and then the short_opts string on the fly, based on the contents of the single table, and also generated the --help output, ensuring consistency of all representations. BRANCH=none BUG=none TEST=as follows: - temporarily added debug code to print out the generated short option string, got the following: aBbcd:fF:hIikLMmn:O:oPpR:rS:stUuVvw which is extended to include previously omitted 'f': aBbcd:F:fhIikLMmn:O:oPpR:rS:stUuVvw - verified that 'gsctool -h' outputs before and after this patch are the same apart from including help text for -B - verified that it is still possible to update a Cr50 - verified --board_id/-i command with various optional parameter representations. Change-Id: Ie8d409c6c8866247323cee93ce5b9bfbe22046fa Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1617077 Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org>
* gsctool: use the usb serial number to find the usb deviceMary Ruthven2019-05-121-3/+19
| | | | | | | | | | | | | | | | | Add a serial number arg that can be used to specify which CCD device to use. If there are multiple CCD devices, you can use this arg to pick which device to update. BUG=none BRANCH=none TEST='gsctool -f -n $SERIAL' can be used to get the cr50 version from two chromebooks connected to the same machine. 'gsctool -f' still works too. Change-Id: I91cbfdc7d62bee2623919e4dded62f92ba7adb19 Signed-off-by: Mary Ruthven <mruthven@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1600501 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
* usb_if: use the device with the matching serial numberMary Ruthven2019-05-121-1/+1
| | | | | | | | | | | | | | There might be multiple devices with the same VID:PID connected to the host. Use the serial number to find the correct device if it is given. BUG=none BRANCH=none TEST=none Change-Id: I96f31e8e7ceb0dd2c3c643771b38752da88a2a9e Signed-off-by: Mary Ruthven <mruthven@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1600500 Reviewed-by: Matthew Blecker <matthewb@chromium.org>
* ec-devutils: Fix fdpexpect importDaniel Kurtz2019-05-021-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | As of pexpect 3.0, the fdexpect module was moved into the pexpect package. Prior to 4.0, a wrapper module was installed along with pexpect, so "import fdexpect" continued to work. In 4.0 this wrapper was removed. Importing fdexpect from pexpect works for our current pexpect 3.3, and will continue to work when we update pexpect to 4.0+. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BRANCH=none BUG=chromium:958677 TEST=(0) with pexpect 3.3, (1) sudo servod --board=grunt TEST=(0) Uprev pexpect to 4.2.1, (1) sudo servod --board=grunt => servod works in both cases Change-Id: I9d21042713d0cc1826cf55da4af7a16f44b746bb Reviewed-on: https://chromium-review.googlesource.com/1593419 Commit-Ready: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Scott Collyer <scollyer@chromium.org> Reviewed-by: Chris McDonald <cjmcdonald@chromium.org> Reviewed-by: Scott Collyer <scollyer@chromium.org>
* gsctool: enforce order of Cr50 section updatesVadim Bendebury2019-04-301-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When both RO and RW updates are required, and the RO includes a new RW signing key, to ensure recovery from failed updates, the RW section of the image needs to be updated before the RO section, In this case interrupted RO or RW update will result in the H1 rebooting still using the original RO and original RW. If the RO was updated first and the RW update was interrupted, the chip could end up with the newer RO with no RW to verify with the new key. BRANCH=none BUG=b:74100307 TEST=created an image with fake RO_B version number of 0.0.106, and then tried to update to this image. Observed that RW_B was transferred before RO_B [1067.694175 FW update: starting...] at 0x84000 at 0x84400 at 0x84800 ... at 0xbb400 at 0x80000 at 0x80400 at 0x80800 at 0x80c00 at 0x81000 at 0x81400 at 0x81800 at 0x81c00 at 0x82000 at 0x82400 Change-Id: Ie5240c14c6b7d73c00baac693be724fab4636992 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1586590 Reviewed-by: Mary Ruthven <mruthven@chromium.org>
* tasks: convert TASK_EVENT_CUSTOM macro to bitJett Rink2019-04-241-5/+5
| | | | | | | | | | | | | | | | | | | | | We should ensure that all custom task definition are non-zero and fit with the globally defined events. Add compile time check and change semantics to specify bit number (instead of making all callers use the BIT macro). This also fixes an error with TASK_EVENT_PHY_TX_DONE for ITE being 0. The bug that made that happen hasn't landed on any firmware branches that use it though. BRANCH=none BUG=none TEST=builds Cq-Depend:chrome-internal:1178968,chrome-internal:1178952 Change-Id: I5e1d1312382d200280c548e9128e53f4eddd3e61 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1570607 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
* i2c-pseudo: Simplify install shell script.Matthew Blecker2019-04-051-18/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The script now unconditionally attempts to (re)install the module, even if it is already loaded. (This also removes a message which had a typo, mistakingly referring to i2c-dev instead of i2c-pseudo.) The script no longer attempts to load i2c-dev, since servod does that now. The script now runs "make clean" before "make" . The header comment no longer references a section of the README that was never checked in. BRANCH=none BUG=b:79684405 TEST=I ran the install script in various scenarios: 1) No i2c-pseudo module loaded or installed. 2) i2c-pseudo module loaded but not installed. 3) i2c-pseudo module installed but not loaded 4) i2c-pseudo module loaded and installed. In all cases the module was (re)installed and either left loaded (if applicable), or loaded (if not previously loaded). The script does not attempt to unload and re-load the module when re-installing only for simplicity. Change-Id: I5f2677b92406b8a49d229bc84d2efcca5504f501 Signed-off-by: Matthew Blecker <matthewb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1552245 Reviewed-by: Nick Sanders <nsanders@chromium.org>
* Add i2c-pseudo Linux kernel module.Matthew Blecker2019-03-307-0/+3624
| | | | | | | | | | | | | | | | | | | | | | This Linux kernel module provides I2C adapters that can be backed by userspace programs. This allows for userspace implementations of functionality such as tunneling I2C through another communication channel to a remote I2C bus. BRANCH=none BUG=b:79684405 TEST=Used i2c-tools CLI to i2c-dev to issue I2C queries, and Python interactive interpreter as the I2C pseudo adapter controller. The i2c-pseudo module correctly proxied write, read, write+read, and multi-byte reads through the controller character device, and it correctly proxied back the responses from the character device, including the specific byte values read. Later, I implemented an I2C pseudo controller in Servod and used it to flash an ITE EC over I2C using both Servo Micro and Suzy-Q. Change-Id: Idda764e56b9e9d577302b59286e873291ea36d25 Signed-off-by: Matthew Blecker <matthewb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1250029 Reviewed-by: Nick Sanders <nsanders@chromium.org>
* servo_updater: make regex more robustRuben Rodriguez Buchillon2019-03-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | Seen some logs where due to the regex cutting out too soon, the servo_updater assumes an update might be needed whereas the version on the v4/micro is actually already up to date. This change tightens the regex used to query the version by requiring it to match some sort of newline character after the version string as well. BRANCH=None BUG=chromium:933978 TEST=manual testing sudo servod_updater [observe it working well] Change-Id: I0b3139a120087d49d6f4bd52267d191716d3b541 Signed-off-by: Ruben Rodriguez Buchillon <coconutruben@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1481770 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Matthew Blecker <matthewb@chromium.org>
* gsctool: add command line option for log retrievalVadim Bendebury2019-03-281-5/+53
| | | | | | | | | | | | | | | | | The new command line option accepts a single optional parameter, the timestamp. If the parameter is not given, the entire log is retrieved one entry at a time. If the parameter is given, only entries newer than the passed in timestamp are retrieved. BRANCH=none BUG=b:63760920 TEST=tried retrieving log entries from an H1 running the updated Cr50 code. Change-Id: I317a659dfc7ebe24cf6f1d957bf0b6d29fb94518 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1525149 Reviewed-by: Namyoon Woo <namyoon@chromium.org>
* Make the argument to --sn_bits a 96-bits hex stringYves Arrouye2019-03-261-22/+41
| | | | | | | | | | | | | | This makes the argument simpler to understand and produce. BUG=chromium:940327 TEST=manual on a device Change-Id: I9226116f52011dab1967196e1c236dd36b11e4c4 Signed-off-by: Yves Arrouye <drcrash@google.com> Reviewed-on: https://chromium-review.googlesource.com/1514215 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Tested-by: Yves Arrouye <drcrash@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org>
* gsctool: Add error code description if authcode fails.Cheng-Han Yang2019-03-201-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When doing RMA reset and the auth code is rejected, gsctool only reports the error code, which is not clear for the user. This CL adds the failure reason to make the message clearer. BUG=b:128801501 TEST=make gsctool; manually test on DUT BRANCH=none [Before fix] localhost $ gsctool -a -r "A" rma unlock failed, code 1 Processing response... localhost $ gsctool -a -r "ABCDEFGH" rma unlock failed, code 6 Processing response... [After fix] localhost $ gsctool -a -r "A" Processing response... rma unlock failed, code 1 (wrong authcode size) localhost $ gsctool -a -r "ABCDEFGH" Processing response... rma unlock failed, code 6 (authcode mismatch) Change-Id: I5db4d8f7cffe5b582f48fdc3b7fb27493b3715ff Signed-off-by: Cheng-Han Yang <chenghan@google.com> Reviewed-on: https://chromium-review.googlesource.com/1527905 Commit-Ready: Cheng-Han Yang <chenghan@chromium.org> Tested-by: Cheng-Han Yang <chenghan@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
* gsctool: fix bug in scanning Boolean optionsVadim Bendebury2019-03-181-1/+1
| | | | | | | | | | | | | The scan should continue while scanned entries are not empty. BRANCH=none BUG=none TEST='gsctool -f is not reporting error anymore. Change-Id: Ie8316de1b95b511ed6c2b3f65c4cfbd92822edf8 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1529711 Reviewed-by: Mary Ruthven <mruthven@chromium.org>
* gsctool: refactor assignment of Boolean flag optionsVadim Bendebury2019-03-172-42/+57
| | | | | | | | | | | | | | | Many of gsctool command line options result in setting a Boolean flag. This patch collects all such flags in a structure, and uses a function to iterate over flags when examining command line options. BRANCH=none BUG=none TEST=verified that Boolean command line options still can be set. Change-Id: Id4a14e573ced893650c4c1c81f8ef92fc0d03bc5 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1525148 Reviewed-by: Mary Ruthven <mruthven@chromium.org>
* gsctool: noop clean upVadim Bendebury2019-03-171-19/+26
| | | | | | | | | | | | | | Replace C++ style comments with C style comments and alphabetize the help output. BRANCH=none BUG=none TEST=gsctool still builds, -h output is ordered. Change-Id: I1a6f10873c123d61773911e97cbf32fce7447ff7 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1525147 Reviewed-by: Namyoon Woo <namyoon@chromium.org>
* gsctool: do not include hashes of unrelated directoriesVadim Bendebury2019-03-151-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When building gsctool, getversion.sh is invoked by the Makefile, and since BOARD environment variable is set to cr50, getversion.sh is trying to retrieve the state of directories used by Cr50, but not present when gsctool is built. Let's just make sure that BOARD is not set to 'cr50' when getversion.sh is invoked. BRANCH=none BUG=none TEST='sudo emerge ec-utils' does not produce getversion.sh errors about not being able to change directory to ../../third_party/{tpm2,cryptoc}, but the version string is still available: $ gsctool -v Version: 1.1.9999-d2e5b7e, built on by @eskimo.mtv.corp.google.com note that date and user name are also not included in this case, but this is a separate unrelated issue. Change-Id: Iadd7615f980e9444c539b5e04afca3f23d080174 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1501836 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
* gsctool: make sure programmed image size is properly alignedVadim Bendebury2019-03-061-0/+6
| | | | | | | | | | | | | | | | | Flash driver of the g chip requires that the size of the programmed area is evenly divisible by 4. This patch makes sure that gsctool complies with this requirement. BRANCH=none BUG=b:127295653 TEST=without this patch attempts to update Cr50 to an image built from ToT fails, with this patch the same image programs just fine. Change-Id: I064d22130a56e9e703f728bc898fd5de82d365d4 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1499657 Reviewed-by: Namyoon Woo <namyoon@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org>
* gsctool: fix version string generation and processingVadim Bendebury2019-02-192-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function reporting the version of the gsctool expects the VERSION variable generated by ./util/getversion.sh utility to start with a single underscore without a prefix. But the utility could be adding various prefixes to the VERSION string depending on the environment variable settings. Those settings are irrelevant for gsctool, it should ignore the prefix up to the first underscore character found in the VERSION string. Also, modify the Makefile to make sure the build date reported by getversion.sh is accurate. BRANCH=none BUG=chromium:932361 TEST=built gsctool and checked version reporting: make BOARD=cr50 CR50_DEV=1 gsctool ./gsctool -v Version: v2.0.821+e890d0974 tpm2:v0.0.320-e987095 \ cryptoc:v0.0.10-b256f39, built on 2019-02-15 10:25:08 \ by vbendeb@eskimo.mtv.corp.google.com Change-Id: I5fb6c4aa1dea6e857fffc7ec5e5a599d61175044 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1474736 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Namyoon Woo <namyoon@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
* console.py: Handle non-TTY input (e.g. piped input), and other improvements.Matthew Blecker2019-02-081-69/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: - Do not assume stdin input is a TTY. Only attempt to manipulate terminal settings when connected to an actual terminal. - Exit upon EOF. This is mostly relevant for non-TTY input, e.g. piped input, though this is not conditioned on TTY-ness. - For non-TTY inputs, sleep before exiting after EOF, in order to allow for for reading a response from the USB console device (e.g. from the Servo). The sleep time is configurable by -S / --notty-exit-sleep command line option, default 0.2 seconds. - Replace os.sleep(0.1) busy loop with waiting on a threading.Event. - Print a newline character upon exit so that a user's shell prompt will not be printed mid-line. BRANCH=none BUG=b:123727520 TEST=I tested handling of non-TTY input by piping Servo v4 console commands such as: $ echo version | ./console.py -d 18d1:501b $ echo reboot | ./console.py -d 18d1:501b With this change, console.py now exits on its own after sending the piped command. Previously when given piped input it would lose the first character of the input due to the attempt to change TTY settings, then it would wait indefinitely for ctrl+c or other signal, and finally it would traceback upon ctrl+c. I tested handling of TTY input in the usual manner, without redirecting stdin. That still works smootly, exits without error upon ctrl+c, and no longer causes the next shell prompt to start mid-line. Change-Id: I894a40a4409b0c422b82158f452f81943277285d Signed-off-by: Matthew Blecker <matthewb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1459139 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Nick Sanders <nsanders@chromium.org>
* powerlog: Don't hijack logger when import as modulePuthikorn Voravootivat2019-01-291-5/+7
| | | | | | | | | | | BRANCH=master BUG=b:112865585,b:123259683 TEST=No log spam when import as module from autotest Change-Id: I7ced102bbb893bc1baa88c625b8c7279a1e32677 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1437515 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
* servo_updater: include sweetberry into servo_updater logicRuben Rodriguez Buchillon2019-01-032-7/+6
| | | | | | | | | | | | | | | | | | | This change allows for sweetberry to be a valid configuration for servo_updater BRANCH=None BUG=b:120449224 TEST=manual testing sudo servod_updater --board sweetberry ... ... update complete image updated Change-Id: If6a9113beb89ae8b58c70e959a77c9bb9f00607d Signed-off-by: Ruben Rodriguez Buchillon <coconutruben@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1369506 Reviewed-by: Nick Sanders <nsanders@chromium.org>
View Lorry Controller Status