| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch allows the ec to manage two fans. Currently common/thermal.c
cannot monitor more than 1 fan at the same time. This CL implements a
board-specific thermal policy with multiple fans.
BUG=b:141259174
BRANCH=hatch
TEST=thermal team verified thermal policy is expected.
Change-Id: I6ababcb0795408e8062b7605bc749e23b8bde45a
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1936077
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It was pointed out to me that the fans config list was non-const, but
there is only 2 boards that require non-const configuration, so
by default make it const, but allow an override.
BRANCH=none
BUG=None
TEST=EC compiles, make tests, buildall
Change-Id: I3ef8c72f6774e1a76584c47d89287f446199e0f2
Signed-off-by: Andrew McRae <amcrae@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1893025
Reviewed-by: Andrew McRae <amcrae@chromium.org>
Tested-by: Andrew McRae <amcrae@chromium.org>
Commit-Queue: Andrew McRae <amcrae@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ran the following command:
git grep -l 'Copyright (c)' | \
xargs sed -i 's/Copyright (c)/Copyright/g'
BRANCH=none
BUG=none
TEST=make buildall -j
Change-Id: I6cc4a0f7e8b30d5b5f97d53c031c299f3e164ca7
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1663262
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Requested for linux integration, use BIT instead of 1 <<
First step replace bit operation with operand containing only digits.
Fix an error in motion_lid try to set bit 31 of a signed integer.
BUG=None
BRANCH=None
TEST=compile
Change-Id: Ie843611f2f68e241f0f40d4067f7ade726951d29
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1518659
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, the fan count is statically set. This patch allows it to
be set dynamically so that a single binary can support devices with
a different number of fans (including fan-less).
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=b:116588924
BRANCH=none
TEST=Boot Fizz with OEM=8. Verify fan spins with OEM=1.
Change-Id: I77fc4e07ce2a1be2e288df145857a79c0003542f
Reviewed-on: https://chromium-review.googlesource.com/1308257
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For npcx, this patch makes rpm_actual updated at every hook_tick
when fan is in duty mode (in addition to rpm mode).
It also sets fan_status to LOCKED if rpm_actual > 0.
BUG=b:110451144
BRANCH=master
TEST=After `fanduty <percent>`, `faninfo` can see actual rpm being updated.
Verify that `fanduty` doesn't impact `fanset`.
Change-Id: I3685ca2b8e51d5dd12974c83656c88fecae1932c
Signed-off-by: Tino Liu <tino.liu@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/1111477
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Vincent Wang <vwang@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch splits struct fan_t into two parts: base configuration
and RPM configuration. RPMs are expected to be different from
model to model while a base configuration is most likely shared.
BUG=b:73720175
BRANCH=none
TEST=make buildall
Change-Id: Iff17573f110e07e88d097dd848cf91ee98b83176
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/949382
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The fans on samus have a recommended minimum duty cycle of 20%
while running, but 30% in order to start. We've been using the
EC's built-in fan controller for the start requirement, but it
has a minimum fast-start duty cycle of 50%. It turns out that
that speed is noticeably noisy.
This change handles the startup with logic in the EC instead, so
that the fan only tries to spin at 30% initially (or if it drops
too much below the minimum turning speed).
BUG=chrome-os-partner:33429
BRANCH=ToT,samus
TEST=make buildall -j
Boot the system, let it idle with the browser windows closed, the
browse a bit, then idle. Listen for changes to the fans.
Before, I could hear the fans kick in and out as the AP load
changed. Now it's much quieter.
Change-Id: Id35215520c064eb6843686ec8bb5f3618dac6cf6
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227658
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Updating the fan speeds according to the manufacturer's specs.
The fan vendor recommends that the minimum fan speed be a 20%
duty cycle. Since the built-in fan controller has a tach-based
feedback loop, I'm using the RPM value instead of the duty cycle
(20% is 2286 RPM, according to the vendor).
The vendor also wants a 30% duty cycle to start turning, but the
built-in fan controller provides support for fast-start too. The
controller's minimum fast-start duty cycle is 50%, but it also
has a programmable number of revolutions that it will wait before
backing off.
Holding my ear down close to the fans while they start and stop,
it seems that the minimum 2 revolution start period is sufficient
and provides the least noise. Of course, since I've never had any
problems starting the fans directly at 1000 RPM this noise is a
little more noticeable than that. It's quite possible that the
built-in controller is smart enough to make 1000 RPM work by
bumping the duty cycle up until the fans turn even if the fans
don't like it.
BUG=chrome-os-partner:32892
BRANCH=ToT,samus
TEST=manual
Listen closely and run the EC console "faninfo" command to see
the fans start and stop as the system boots and idles.
Change-Id: I47c9e7cef3f9f4bd815a13032fe10234decd62ed
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224830
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds explicit "int fan" args to the exported functions from
common/fan.c: fan_set_percent_needed() and fan_percent_to_rpm(). Within that
file, multiple fans are handled independently.
This is not complete, though. Host commands and sysjump support still only
handle a single fan, so at the moment multiple fans are treated identically
in those cases.
BUG=chrome-os-partner:23530
BRANCH=none
TEST=manual
All boards build, "make runtests" passes.
On a multi-fan system, the EC command "faninfo" displays multiple results:
> faninfo
Fan 0 Actual: 0 rpm
Fan 0 Target: 0 rpm
Fan 0 Duty: 0%
Fan 0 Status: 0 (not spinning)
Fan 0 Mode: rpm
Fan 0 Auto: yes
Fan 0 Enable: yes
Fan 1 Actual: 0 rpm
Fan 1 Target: 0 rpm
Fan 1 Duty: 0%
Fan 1 Status: 0 (not spinning)
Fan 1 Mode: rpm
Fan 1 Auto: no
Fan 1 Enable: no
>
and the "fanduty", "fanset", and "fanauto" all require the fan number as the
first arg:
> fanduty 0 30
Setting fan 0 duty cycle to 30%
> fanset 1 2000
Setting fan 1 rpm target to 2000
> fanauto 0
> fanauto 1
On single-fan systems, there is no visible change.
Change-Id: Idb8b818122e157960d56779b2a86e5ba433bee1b
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175368
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a logical difference between PWM controls for things like
backlights and fan controls for actual fans. This change separates them into
two different data structures, for better abstraction.
BUG=chrome-os-partner:23530
BRANCH=none
TEST=manual
make runtests, make all boards, test on Link and Falco.
Change-Id: Ib63f2d1518fcc2ee367f81bf5d803360c1aa5c76
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175151
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Just adding some comments.
BUG=chrome-os-partner:23530
BRANCH=none
TEST=none
Change-Id: Ib3955e9d97ad8aa642e6fe298c17e34d2c66fb1c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175139
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This looks like a lot, but it's really just moving the non-board-specific
stuff from chip/lm4/fan.c into common/fan.c, updating the appropriate
headers, and renaming functions to better match the new location.
This is entirely code refactoring and renaming. No new functionality.
BUG=chrome-os-partner:23530
BRANCH=none
TEST=manual
make runtests, build all platforms, build and test on Link.
Change-Id: I7dc03d6732bad83cf838a86600b42a7cff5aa7aa
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175012
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we cleaned up the alternate function GPIO initialization, we left a
declaration for configure_fan_gpios() in fan.h. That function doesn't exist
anywhere, so there's no point in declaring it.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=manual
Build everything. Nothing fails.
Change-Id: I3d1fe1ff62e523aa7c87d57c5e838b01a0c6e899
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174334
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
Problems with existing thermal control loop:
* Not multi-board friendly. thermal.c only supports Link and needs
refactoring. Temp thresholds and fan speeds are hard-coded.
* Only the PECI temp is used to determine the fan speed. Other temp sensors
are ignored.
* Has confusing data structures. Values in the CPU temp thresholds array mix
ACPI thresholds with fan step values.
With this change, the thermal task monitors all temp sensors in order to
perform two completely independent functions:
Function one: Determine if the host needs to be throttled by or informed of
any thermal events.
For thermal events, each temp sensor will have three threshold levels.
TEMP_HOST_WARN
* When any sensor goes above this level, host_throttle_cpu(1) will be called
to ask the CPU to slow itself down.
* When all sensors drop below this level, host_throttle_cpu(0) will be called.
* Exactly AT this level, nothing happens (this provides hysteresis).
TEMP_HOST_HIGH
* When any sensor goes above this level, chipset_throttle_cpu(1) will be
called to slow the CPU down whether it wants to or not.
* When all sensors drop below this level, chipset_throttle_cpu(0) will be
called.
* Exactly AT this level, nothing happens (this provides hysteresis).
TEMP_HOST_SHUTDOWN
* When any sensor is above this level, chipset_force_shutdown() will be
called to halt the CPU.
* Nothing turns the CPU back on again - the user just has to wait for things
to cool off. Pressing the power button too soon will just trigger shutdown
again as soon as the EC can read the host temp.
Function two: Determine the amount of fan cooling needed
For fan cooling, each temp sensor will have two levels.
TEMP_FAN_OFF
* At or below this temperature, no active cooling is needed.
TEMP_FAN_MAX
* At or above this temperature, active cooling should be running at maximum.
The highest level of all temp sensors will be used to request the amount of
active cooling needed. The function pwm_fan_percent_to_rpm() is invoked to
convert the amount of cooling to the target fan RPM.
The default pwm_fan_percent_to_rpm() function converts smoothly between the
configured CONFIG_PWM_FAN_RPM_MIN and CONFIG_PWM_FAN_RPM_MAX for percentages
between 1 and 100. 0% means "off".
The default function probably provide the smoothest and quietest behavior,
but individual boards can provide their own pwm_fan_percent_to_rpm() to
implement whatever curves, hysteresis, feedback, or other hackery they wish.
BUG=chrome-os-partner:20805
BRANCH=none
TEST=manual
Compile-time test with
make BOARD=falco runtests
On the EC console, the existing fan commands should work correctly:
faninfo - display the fan state
fanduty NUM - force the fan PWM to the specified percentage (0-100)
fanset RPM - force the fan to the specified RPM
fanset NUM% - force the fan to the specified percentage (0-100) between
its configured minimum and maximum speeds from board.h
(CONFIG_PWM_FAN_RPM_MIN and CONFIG_PWM_FAN_RPM_MAX)
fanauto - let the EC control the fan automatically
You can test the default pwm_fan_percent_to_rpm() with
fanset 1%
faninfo
The fan should be turning at CONFIG_PWM_FAN_RPM_MIN. Let the EC control it
automatically again with
fanauto
Also on the EC console, the thermal settings can be examined or changed:
> temps
PECI : 327 K = 54 C
ECInternal : 320 K = 47 C
G781Internal : 319 K = 46 C
G781External : 318 K = 45 C
>
> thermalget
sensor warn high shutdown fan_off fan_max name
0 373 387 383 333 363 PECI
1 0 0 0 0 0 ECInternal
2 0 0 0 0 0 G781Internal
3 0 0 0 0 0 G781External
>
> help thermalset
Usage: thermalset sensor warn [high [shutdown [fan_off [fan_max]]]]
set thermal parameters (-1 to skip)
>
> thermalset 2 -1 -1 999
sensor warn high shutdown fan_off fan_max name
0 373 387 383 333 363 PECI
1 0 0 0 0 0 ECInternal
2 0 0 999 0 0 G781Internal
3 0 0 0 0 0 G781External
>
From the host, ectool can be used to get and set these parameters with
nearly identical commands:
ectool thermalget
ectool thermalset 2 -1 -1 999
Change-Id: Idb27977278f766826045fb7d41929953ec6b1cca
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66688
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
