| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After this host command is called, the value is stored in
g_vboot_mode and never accessed again.
BUG=b:124141368, chromium:1014379
TEST=make buildall -j
BRANCH=none
Change-Id: I7923658139d15394c1c3c07baca7168e34c111e9
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1830239, chromium:1864533
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1865050
Tested-by: Joel Kitching <kitching@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Commit-Queue: Joel Kitching <kitching@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We want to ensure that the entire buffer we may be sending back to the
host from the EC does not contain any data from previous host command
responses. Clear the data in common code so all chips do not have to
implement this functionality.
BRANCH=none
BUG=b:144878983,chromium:1026994
TEST=new unit test shows cleared data
Change-Id: I93ad4d36923ba1bf171f740e94830640d3fde3b0
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1930931
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In order to pass the right printf format specifiers for certain types
that are compiled both in 32-bit EC and 64-bit host environments,
standard macros PRIx64 and PRId64 must be introduced. These specify
the correct printf format specifier in the given compilation environment
for printing a 64-bit value.
On the host, inttypes.h already exists. Add an inttypes.h for the EC
codebase so that these macros can be used where they're needed.
BUG=chromium:984041
TEST=make -j buildall
BRANCH=none
Change-Id: I76e3bdc88aef7da6e5234d5b86b595f7138ea9a1
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1819642
Reviewed-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the host command handler callback function returns an int, it's easy
to accidentally mix up the enum ec_error_list and enum ec_status types.
The host commands always expect an enum ec_status type, so we change the
return value to be of that explicit type. Compilation will then fail if
you accidentally try to return an enum ec_error_list value.
Ran the following commands and then manually fixed up a few remaining
instances that were not caught:
git grep --name-only 'static int .*(struct host_cmd_handler_args \*args)' |\
xargs sed -i 's#static int \(.*\)(struct host_cmd_handler_args \*args)#\
static enum ec_status \1(struct host_cmd_handler_args \*args)##'
git grep --name-only 'int .*(struct host_cmd_handler_args \*args)' |\
xargs sed -i 's#int \(.*\)(struct host_cmd_handler_args \*args)#\
enum ec_status \1(struct host_cmd_handler_args \*args)##'
BRANCH=none
BUG=chromium:1004831
TEST=make buildall -j
Cq-Depend: chrome-internal:1872675
Change-Id: Id93df9387ac53d016a1594dba86c6642babbfd1e
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1816865
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Expose console command to force tablet mode. This helps in testing
whether a given device wakes on tablet mode switch.
BUG=b:133262012
BRANCH=None
TEST=Deploy on hatch and play with the command.
Change-Id: Id6ffbf5226590e10a0758a07761f78024d57bb58
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1797370
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ran the following command:
git grep -l 'Copyright (c)' | \
xargs sed -i 's/Copyright (c)/Copyright/g'
BRANCH=none
BUG=none
TEST=make buildall -j
Change-Id: I6cc4a0f7e8b30d5b5f97d53c031c299f3e164ca7
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1663262
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Automatically use CC=clang if TEST_ASAN is specified.
Also, add a __no_sanitize_address attribute macro to prevent ASan
from adding guards around host_command, mkbp_event, and hook
"arrays" that are generated at link-time.
Also, set ASAN_OPTIONS env variable in run_host_test.
BRANCH=none
BUG=chromium:854924
TEST=make TEST_ASAN=y runtests -j
Change-Id: Iaf0ec405022760d757a8a9d62a5022460d1b16e1
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1109661
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have converted all LPC-only configs to HOSTCMD_LPC so the remaining
CONFIG_LPC defines represent the common case.
BRANCH=none
BUG=chromium:818804
TEST=Full stack builds and works on yorp (espi) and grunt (lpc)
Change-Id: Iba9a48f2cab12fadd0d9ab8eab0d5d5476eab238
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1067503
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium:803955
BRANCH=none
TEST=Verify counters are printed every hour and before sysjump as follows:
[12.540051 HC Suppressed: 0x97=25 0x98=0 0x115=0]
Change-Id: I1c1aecf316d233f967f1d2f6ee6c9c16cc59bece
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/912150
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Host command handler prints every single host command except when
commands are repeated back-to-back. This patch allows each board
decide which commands should be ignored. When debug printf is
suppressed, a global counter is incremented. Developers know there
were commands processed but not reported to the console.
BUG=chromium:803955
BRANCH=none
TEST=Observe 0x97 and 0x98 were not printed. Global suppress
counter is incremented.
Change-Id: I05e8cde9039f602e8fc06c20e89b328e797bd733
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/876952
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unified Host Event Programming Interface (UHEPI) enables a unified host
command EC_CMD_PROGRAM_HOST_EVENT to set/get/clear different host events.
Old host event commands (0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E,
0x8F) is supported for backward compatibility. But newer version of
BIOS/OS is expected to use UHEPI command (EC_CMD_PROGRAM_HOST_EVENT)
The UHEPI also enables the active and lazy wake masks. Active wake mask
is the mask that is programmed in the LPC driver (i.e. the mask that is
actively used by LPC driver for waking the host during suspended state).
It is same as the current wake mask that is set by the smihandler on host
just before entering sleep state S3/S5. On the other hand, lazy wake masks
are per-sleep masks (S0ix, S3, S5) so that they can be used by EC to set
the active wake mask depending upon the type of sleep that the host has
entered. This allows the host BIOS to perform one-time programming of
the wake masks for each supported sleep type and then EC can take care
of appropriately setting the active mask when host enters a particular
sleep state.
BRANCH=none
BUG=b:63969337
TEST=make buildall -j. And verfieid following scenario
1). Verified wake masks with ec hostevent command on S0,S3,S5 and S0ix
2). suspend_stress_test with S3 and S0ix
3). Verified "mosys eventlog list" in S3 and s0ix resume to confirm
wake sources (Lid, power buttton and Mode change)
4). Verified "mosys eventlog list" in S5 resume to confirm wake sources
(Power Button)
5). Verified above scenarios with combination of Old BIOS + New EC and
New BIOS + Old EC(making get_feature_flags1() return 0)
Change-Id: Idb82ee87fffb475cd3fa9771bf7a5efda67af616
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/576047
Commit-Ready: Jenny Tc <jenny.tc@intel.com>
Commit-Ready: Jenny Tc <jenny.tc@intel.corp-partner.google.com>
Tested-by: Jenny Tc <jenny.tc@intel.com>
Tested-by: Jenny Tc <jenny.tc@intel.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the upcoming change to add a new command to get/set/clear host
events and masks, it seems to be the right time to bump up the host
events and masks to 64-bit. We are already out of available host
events. This change opens up at least 32 bits for new host events.
Old EC commands to operate on host events/masks will still deal with
lower 32-bits of the events/mask. On the other hand, the new command
being added will take care of the entire 64-bit events/masks. This
ensures that old BIOS and kernel versions can still work with the
newer EC versions.
BUG=b:69329196
BRANCH=None
TEST=make -j buildall. Verified:
1. hostevent set 0x4000 ==> Sets correct bit in host events
2. hostevent clear 0x4000 ==> Clears correct bit in host events
3. Kernel is able to query and read correct host event bits from
EC. Verified using evtest.
4. Coreboot is able to read correct wake reason from EC. Verified
using mosys eventlog list.
Change-Id: Idcb24ea364ac6c491efc2f8dd9e29a9df6149e07
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/770925
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Prepare for exposing the feature flags through EC ACPI memory space by
moving the definitions and collection function into its own unit.
BUG=b:64705535
BRANCH=none
TEST=builds and returns the same value
Change-Id: I66eabebe0d039fdcd14d11b9ecf77c0f1040d006
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/633925
Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, result codes were being stored as `enum ec_status` values.
The compiler was forcing this value to only be one byte large, since
that's all that was necessary to represent all the values of that
enum.
This change fixes this bug by switching result code variable types from
`enum ec_status` to `uint16_t`.
BRANCH=none
BUG=none
TEST=make buildall -j
Change-Id: Iacdca51dc6c1de677d2fbb59ad6dd2572d21ea7f
Reviewed-on: https://chromium-review.googlesource.com/513609
Commit-Ready: Jeff Andersen <jeffandersen@google.com>
Tested-by: Jeff Andersen <jeffandersen@google.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
host_is_event_set checks whether a given event is set or not.
BUG=none
BRANCH=none
TEST=make buildall
Change-Id: I7207fa75d155d5b9adc50430bc1ed703bea7c1b9
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/514208
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Follow-up to CL:456520, addressing a few more comments.
BRANCH=none
BUG=b:35775099
TEST=sysrq available in EC console
TEST=sysrq h => help message in AP console
TEST=sysrq b => AP reboots
Change-Id: I692afa7c911882f00d92b8e6d83889c52821e171
Reviewed-on: https://chromium-review.googlesource.com/468506
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Rename PRIVATE_HOST_COMMAND_VALUE to EC_PRIVATE_HOST_COMMAND_VALUE to
make it clear it is part of EC and reduce the likelihood of collisions.
* Move PRIVATE_HOST_COMMAND_VALUE macro to ec_commands.h. This reduces the
transitive dependencies required to determine the value of a private host
command. This is beneficial for code outside of the ChromiumOS build
environment that needs to send private commands to an EC.
* Define DECLARE_PRIVATE_HOST_COMMAND when there is no host command task.
This will prevent builds with private commands from failing when the host
command task is not configured.
BUG=chromium:570895
BRANCH=none
TEST=make -j buildall
Change-Id: Iad938cb6a1521b65e4f893439d592ef375caace9
Reviewed-on: https://chromium-review.googlesource.com/426737
Commit-Ready: Carl Hamilton <carlh@chromium.org>
Tested-by: Carl Hamilton <carlh@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use binary search in host command lookup dispatcher
BUG=chromium:570895
TEST=manual testing on kevin
- Kevin boots
- ectool hello
make buildall -j
Verify *.smap hcmds section is sorted:
BOARD with host commands and private host commands
0004d0ec R __hcmds
0004d0ec R __host_cmd_0x00000x0000
0004d0f8 R __host_cmd_0x00000x0001
0004d104 R __host_cmd_0x00000x0002
0004d110 R __host_cmd_0x00000x0003
0004d11c R __host_cmd_0x00000x0004
0004d128 R __host_cmd_0x00000x0005
0004d134 R __host_cmd_0x00000x0007
0004d140 R __host_cmd_0x00000x0008
0004d14c R __host_cmd_0x00000x000a
0004d158 R __host_cmd_0x00000x000d
0004d164 R __host_cmd_0x00000x0010
0004d170 R __host_cmd_0x00000x0011
0004d17c R __host_cmd_0x00000x0012
0004d188 R __host_cmd_0x00000x0013
0004d194 R __host_cmd_0x00000x0015
0004d1a0 R __host_cmd_0x00000x0016
0004d1ac R __host_cmd_0x00000x0017
0004d1b8 R __host_cmd_0x00000x0087
0004d1c4 R __host_cmd_0x00000x008c
0004d1d0 R __host_cmd_0x00000x008f
0004d1dc R __host_cmd_0x00000x0092
0004d1e8 R __host_cmd_0x00000x0093
0004d1f4 R __host_cmd_0x00000x0097
0004d200 R __host_cmd_0x00000x0098
0004d20c R __host_cmd_0x00000x00b6
0004d218 R __host_cmd_0x00000x00d2
0004d224 R __host_cmd_0x00000x00d3
0004d230 R __host_cmd_0x3E000x0000
0004d23c R __host_cmd_0x3E000x0002
0004d248 R __evt_src_EC_MKBP_EVENT_HOST_EVENT
0004d248 R __hcmds_end
BOARD with host commands only
100bc888 R __hcmds
100bc888 R __host_cmd_0x00000x0000
100bc894 R __host_cmd_0x00000x0001
100bc8a0 R __host_cmd_0x00000x0002
100bc8ac R __host_cmd_0x00000x0003
100bc8b8 R __host_cmd_0x00000x0004
100bc8c4 R __host_cmd_0x00000x0005
100bc8d0 R __host_cmd_0x00000x0006
100bc8dc R __host_cmd_0x00000x0007
100bc8e8 R __host_cmd_0x00000x0008
100bc8f4 R __host_cmd_0x00000x0009
100bc900 R __host_cmd_0x00000x000a
100bc90c R __host_cmd_0x00000x000b
100bc918 R __host_cmd_0x00000x000d
100bc924 R __host_cmd_0x00000x0010
100bc930 R __host_cmd_0x00000x0011
100bc93c R __host_cmd_0x00000x0012
100bc948 R __host_cmd_0x00000x0013
100bc954 R __host_cmd_0x00000x0015
100bc960 R __host_cmd_0x00000x0016
100bc96c R __host_cmd_0x00000x0017
100bc978 R __host_cmd_0x00000x0025
100bc984 R __host_cmd_0x00000x0026
100bc990 R __host_cmd_0x00000x0029
100bc99c R __host_cmd_0x00000x002a
100bc9a8 R __host_cmd_0x00000x002b
100bc9b4 R __host_cmd_0x00000x002c
100bc9c0 R __host_cmd_0x00000x0044
100bc9cc R __host_cmd_0x00000x0045
100bc9d8 R __host_cmd_0x00000x0046
100bc9e4 R __host_cmd_0x00000x0047
100bc9f0 R __host_cmd_0x00000x0061
100bc9fc R __host_cmd_0x00000x0062
100bca08 R __host_cmd_0x00000x0064
100bca14 R __host_cmd_0x00000x0065
100bca20 R __host_cmd_0x00000x0067
100bca2c R __host_cmd_0x00000x0087
100bca38 R __host_cmd_0x00000x008c
100bca44 R __host_cmd_0x00000x008d
100bca50 R __host_cmd_0x00000x008f
100bca5c R __host_cmd_0x00000x0092
100bca68 R __host_cmd_0x00000x0093
100bca74 R __host_cmd_0x00000x0096
100bca80 R __host_cmd_0x00000x0097
100bca8c R __host_cmd_0x00000x0098
100bca98 R __host_cmd_0x00000x0099
100bcaa4 R __host_cmd_0x00000x009e
100bcab0 R __host_cmd_0x00000x00a0
100bcabc R __host_cmd_0x00000x00a1
100bcac8 R __host_cmd_0x00000x00a8
100bcad4 R __host_cmd_0x00000x00a9
100bcae0 R __host_cmd_0x00000x00b6
100bcaec R __host_cmd_0x00000x00b7
100bcaf8 R __host_cmd_0x00000x00d2
100bcb04 R __host_cmd_0x00000x00d3
100bcb10 R __host_cmd_0x00000x00db
100bcb1c R __host_cmd_0x00000x0101
100bcb28 R __host_cmd_0x00000x0102
100bcb34 R __host_cmd_0x00000x0103
100bcb40 R __host_cmd_0x00000x0104
100bcb4c R __host_cmd_0x00000x0110
100bcb58 R __host_cmd_0x00000x0111
100bcb64 R __host_cmd_0x00000x0112
100bcb70 R __host_cmd_0x00000x0113
100bcb7c R __host_cmd_0x00000x0114
100bcb88 R __host_cmd_0x00000x0115
100bcb94 R __host_cmd_0x00000x0116
100bcba0 R __host_cmd_0x00000x0117
100bcbac R __host_cmd_0x00000x0118
100bcbb8 R __host_cmd_0x00000x011a
100bcbc4 R __evt_src_EC_MKBP_EVENT_KEY_MATRIX
100bcbc4 R __hcmds_end
BRANCH=none
Change-Id: I5d13d2a7fe7fa9a0fbeed43177cc612f572a58bb
Reviewed-on: https://chromium-review.googlesource.com/419702
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit c459c8278ed2dc84100693eab93389a0df9429bd
as the fix is not straightforwad, some host command codes in
private repos are expressed using C preprecessor which
breaks the assumption of this patch that all host commands
are expressed as four digit hex numbers.
Change-Id: I922de9ae8dbab6eef048463c5c09b1f338152083
Reviewed-on: https://chromium-review.googlesource.com/414492
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use binary search in host command lookup dispatcher
BUG=chrome-os-partner:570895
TEST=manual testing on kevin
- Kevin boots
- ectool hello
make buildall -j
Verify *.smap hcmds section is sorted:
100bca94 R __hcmds
100bca94 R __host_cmd_0x0000
100bcaa0 R __host_cmd_0x0001
100bcaac R __host_cmd_0x0002
100bcab8 R __host_cmd_0x0003
100bcac4 R __host_cmd_0x0004
100bcad0 R __host_cmd_0x0005
100bcadc R __host_cmd_0x0006
100bcae8 R __host_cmd_0x0007
100bcaf4 R __host_cmd_0x0008
100bcb00 R __host_cmd_0x0009
100bcb0c R __host_cmd_0x000a
100bcb18 R __host_cmd_0x000b
100bcb24 R __host_cmd_0x000d
100bcb30 R __host_cmd_0x0010
100bcb3c R __host_cmd_0x0011
100bcb48 R __host_cmd_0x0012
100bcb54 R __host_cmd_0x0013
100bcb60 R __host_cmd_0x0015
100bcb6c R __host_cmd_0x0016
100bcb78 R __host_cmd_0x0017
100bcb84 R __host_cmd_0x0025
100bcb90 R __host_cmd_0x0026
100bcb9c R __host_cmd_0x0029
100bcba8 R __host_cmd_0x002a
100bcbb4 R __host_cmd_0x002b
100bcbc0 R __host_cmd_0x002c
100bcbcc R __host_cmd_0x0044
100bcbd8 R __host_cmd_0x0045
100bcbe4 R __host_cmd_0x0046
100bcbf0 R __host_cmd_0x0047
100bcbfc R __host_cmd_0x0061
100bcc08 R __host_cmd_0x0062
100bcc14 R __host_cmd_0x0064
100bcc20 R __host_cmd_0x0065
100bcc2c R __host_cmd_0x0067
100bcc38 R __host_cmd_0x0087
100bcc44 R __host_cmd_0x008c
100bcc50 R __host_cmd_0x008d
100bcc5c R __host_cmd_0x008f
100bcc68 R __host_cmd_0x0092
100bcc74 R __host_cmd_0x0093
100bcc80 R __host_cmd_0x0096
100bcc8c R __host_cmd_0x0097
100bcc98 R __host_cmd_0x0098
100bcca4 R __host_cmd_0x0099
100bccb0 R __host_cmd_0x009e
100bccbc R __host_cmd_0x00a0
100bccc8 R __host_cmd_0x00a1
100bccd4 R __host_cmd_0x00a8
100bcce0 R __host_cmd_0x00a9
100bccec R __host_cmd_0x00b6
100bccf8 R __host_cmd_0x00b7
100bcd04 R __host_cmd_0x00d2
100bcd10 R __host_cmd_0x00d3
100bcd1c R __host_cmd_0x00db
100bcd28 R __host_cmd_0x0101
100bcd34 R __host_cmd_0x0102
100bcd40 R __host_cmd_0x0103
100bcd4c R __host_cmd_0x0104
100bcd58 R __host_cmd_0x0110
100bcd64 R __host_cmd_0x0111
100bcd70 R __host_cmd_0x0112
100bcd7c R __host_cmd_0x0113
100bcd88 R __host_cmd_0x0114
100bcd94 R __host_cmd_0x0115
100bcda0 R __host_cmd_0x0116
100bcdac R __host_cmd_0x0117
100bcdb8 R __host_cmd_0x0118
100bcdc4 R __host_cmd_0x011a
100bcdd0 R __evt_src_EC_MKBP_EVENT_KEY_MATRIX
100bcdd0 R __hcmds_end
BRANCH=none
Change-Id: Ideb9951b318763f71915e2c4e5052f4b4bfab173
Reviewed-on: https://chromium-review.googlesource.com/405528
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some functions are only defined if CONFIG_HOSTCMD_EVENTS is set,
leading to link-time failures.
In particular, do not call these functions from keyboard_scan,
and do not define PD host event commands if the configuration
option is not set.
BRANCH=none
BUG=chrome-os-partner:59083
TEST=make buildall -j
Change-Id: I0da31cdec08f86f148aa883698a44f462de46d8e
Reviewed-on: https://chromium-review.googlesource.com/410923
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
No functional changes.
BUG=none
BRANCH=none
TEST=make buildall passes
Change-Id: Ie852feb8e3951975d99dce5a49c17f5f0e8bc791
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/403417
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't build a table of host / console commands if the HOSTCMD or CONSOLE
task is not present. This saves space in the .hcmds / .cmds section and
allows the linker to prune command handler functions which will never be
called.
BUG=chrome-os-partner:41959
TEST=Verify ec.RO.flat shrinks on snoball and glados_pd, and remains the
same size on chell and samus. Also verify basic functions are still
working on snoball and glados_pd.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I79975c18ec1d87fedda8d1f299f30ffc43c24f69
Reviewed-on: https://chromium-review.googlesource.com/319112
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On some systems, we may wish to have the PD follow the EC into
hibernate. Add a status field to EC_CMD_PD_EXCHANGE_STATUS to support
this.
BUG=chrome-os-partner:45010
TEST=Manual on glados with subsequent commit. Run 'hibernate' on EC
console, verify that both EC and PD go to hibernate. Plug zinger and
verify that both EC and PD wake, AP boots, and battery begins charging.
BRANCH=None
Change-Id: I0476bc8a47ffb0fe113dccda9d4f8074105c1c84
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/302712
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For multi-byte ACPI memmap reads, we previously had a mutex to ensure
data continuity. A better approach is to use a read cache. Since the
kernel will enable burst mode before reading a multi-byte memmap
variable and disable it afterward, we can populate the cache on the
first read after enabling burst. This solution removes deadlock bugs, is
contained entirely in acpi.c, and saves a deferred function.
BUG=chromium:514283
TEST=Manual on Glados. Add prints in acpi_read, verify that multi-byte
reads come from cache and non-burst reads continue to function as
before.
BRANCH=Cyan
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I74e4927bf2b433e31a9ff65d72820fa087c51722
Reviewed-on: https://chromium-review.googlesource.com/288871
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
mutex_lock() is called from MEC1322_IRQ_ACPIEC0_IBF
interrupt context, causing deadlock and assertion
in __wait_evt().
In the interrupt context it now checks for mutex lock first.
If the mutex is already locked,, it will disable ACPI
interrupts and defer the memmap mutex lock.
Added LPC interrupt disable/enable functions as needed.
Increased deferred function count where needed.
BRANCH=None
BUG=chrome-os-partner:40820
TEST=Test for suspend-resume, cold, warm reboots and
other general stability.
Change-Id: I3dda0d4635a6b6281faf200c8c7b6fcba8877254
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/280418
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Tested-by: Divya Jyothi <divya.jyothi@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add CONFIG_LTO to use GCC Link-Time Optimizations to try to reduce the
flash footprint of the firmware.
Add additional protection to some functions/data to avoid removal by the
linker when their usage is not obvious.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall (with and without LTO enable on all boards)
Change-Id: I586b8c1eda4592b416c85383b65153c1d5ab0059
Reviewed-on: https://chromium-review.googlesource.com/271291
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some platforms are unable to access the 900h-9ffh region over LPC and
must instead access memmap data through the ACPI CMD / DATA ports. To
avoid racing with data updates, disallow changes to multi-byte memmap
data while in burst mode.
Linux currently enables burst mode when accessing multi-byte data and
disables it immediately afterward, though the ACPI spec defines burst mode
in a more general way.
BUG=chrome-os-partner:38224
TEST=Manual on Samus. Undefine LPC_MEMMAP and modify asl to move memmap
data to ERAM at offset 0x20. Verify system boots cleanly and battery
status is updated immediately on plug / unplug.
BRANCH=None
Change-Id: Ib848bdb491fdfece96ad0cee7a44ba85b4a1a50b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/262072
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix bug on samus that the battery status doesn't always show on
lightbar when AC is plugged/unplugged. It doesn't show when the
battery is full is S3 or S5 because in these states we turn off
CHARGE_EN so that ACOK to the EC never toggles.
Instead, what we want to do is display battery status whenever the
active charge port changes. This will happen when AC is plugged or
unplugged OR if a user has AC on both ports and toggles between
them using the charge override hot-keys.
BUG=chrome-os-partner:36317
BRANCH=samus
TEST=test plugging and unplugging AC on both sides when battery is
full and unit is in S0, and when unit is in S5. also tested lightbar
flashes battery percentage when two zingers are plugged in and you
switch between them using Ctrl+Search+0|1|2.
Change-Id: I5cd7fff4f466adf857f1e63f07f3b0c7ae8422c7
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245922
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Occasionally the charge circuit on samus gets wedged and will not
charge. This change detects when the charge circuit has failed
and automatically recovers from it. It uses the BQ PROCHOT warning
to detect the failure by setting PROCHOT to trigger when the BQ
thinks input current is higher than the input current limit. When
the failure is detected, the EC disables charging and tells PD MCU
to disable CHARGE_EN, then a couple seconds later, it re-enables
charging.
This CL also adds more communication between EC and PD for the EC
to be able to set the charge state for the PD. Valid charge states
are: No charging allowed, 5V charging only, and max charging. The
EC uses this as such:
- When the EC gets AC present interrupt, it sets off a deferred
function to change charge state to max charging after some delay
to give time for the charge circuit to settle down.
- When the EC gets AC disconnect interrupt, it disables charging
briefly, enables learn mode, and then sets 5V charging allowed.
This allows for the same starting conditions in the charge circuit
for every AC attach.
- When the EC detects a wedged charge circuit, it disables charging
and waits a few seconds before re-enabling 5V only charging.
Additionally, this change moves the charging cutoff in S3/S5/G3 when
the battery is full to the EC. With the added control for the EC
to set the PD charging state, it is more convenient for the EC to
manage cutting off charging when battery is full.
BUG=chrome-os-partner:36081
BRANCH=samus
TEST=test the basics:
- connect/disconnect zinger a bunch of times
- connect and disconnect two zingers in different order
- connect two zingers and charge override between the two
test the automatic charge wedge recover:
- wedge the charge circuit by setting charger voltage under battery
voltage: "charger voltage 7000"
- wait a few seconds for the system to recover and check it is charging
with "battery" command
test full battery charge cutoff:
- added console command to change battery soc in board/samus/extpower.c:
static int cmd_battfake(int argc, char **argv)
{
char *e;
battery_soc = strtoi(argv[1], &e, 10);
batt_soc_change();
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(battfake, cmd_battfake, "", "", NULL);
- in S0, tested "battfake 100" does not disable charging.
- in G3, tested "battfake 100" disables charging and "battfake 99"
re-enables charging.
- set "battfake 100" and tested transitioning to S0 enables charging and
transitioning to S5 disables charging.
- attached two chargers and used charge override to select active port.
then toggled "battfake 100" to "battfake 99" back and forth and verified
charge override port is still the same.
test third-party 12V charger:
- plug in a bunch of times and make sure we stay at 5V for 500ms and then
transition to 12V
test with no battery:
- tested five different units with no battery and just zinger. 3/5 boot,
while the other 2 don't. But, the 2 that don't boot without battery also
can't boot w/o battery when this CL is reverted, so I don't think this
change is causing the problem, I think there is an electrical limitation.
test with EVT zinger:
- EVT zingers (P2 - C2) negotiate very quickly after connection, which
can cause INA problems w/o this CL. Tested an EVT zinger with samus and
did a bunch of connections and disconnections and verified that we always
wait at 5V for 500ms and that we don't wedge the INA circuit on connect.
test backwards compatibility:
- test new PD with old EC and make sure we can charge with zinger.
(note that if the charge circuit wedges, we won't be able to unwedge it).
- test old PD with new EC and make sure we can charge with zinger.
Change-Id: I7703b7a2ab1209d7f559b265b03517e79c74b16a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245253
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This exposes the pd_exchange_status() function and lets it
return the charge port that the PD reports, so that the lightbar
TAP sequence can decide which direction to display.
BUG=chrome-os-partner:32227
BRANCH=ToT, samus
TEST=make buildall -j
Change-Id: I78b57fbeaaf38fee15c86eca4d90abce77e2f722
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/232092
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ref: Common Smart Battery System Inferface Specification v8.0.
- Added 2 new AP->EC Command APIs
EC_CMD_SB_FW_UPDATE, EC_CMD_ENTERING_MODE
- Implemented common smart battery update drivers.
BUG=chrome-os-partner:24741
CQ-DEPEND=CL:210032
CQ-DEPEND=CL:210033
CQ-DEPEND=CL:215720
BRANCH=ToT,glimmer
TEST=Verified on LGC & Simplo smart battery
Change-Id: Ice6e60b1b04762217ae7613356d6925777c06abf
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/205323
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use a EC to PD host command to notify the PD MCU when a battery
is present and charged enough that it is ok to negotiate for a
higher power. The PD MCU will not negotiate until the host command
is received, which allows the system to be powered without a
battery or with a dead battery with 5V.
BUG=chrome-os-partner:28611
BRANCH=none
TEST=Tested on a samus:
1) Tested the normal case of battery charged and plugged in. When
charger is plugged in, the device immediately starts negotiating
for 20V and starts charging.
2) Tested with no battery. Plug in a charger, samus boots and stays
alive. VBUS measured at 5V. When a battery is plugged in, device
negotiates for 20V and starts charging.
3) Tested dead battery by taking a battery with no charge, and
plugging in zinger. Everything boots, but PD does not negotiate
for power. Then when battery reaches 1%, PD negotiates and zinger
switches to 20V without causing a reboot.
Change-Id: Iaa451403674e86cddbd3fe80e9503584910be576
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/201958
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Initial support for EC to PD communication using host
command interface over i2c.
BUG=chrome-os-partner:28351, chrome-os-partner:28352
BRANCH=none
TEST=on EC console send hello host command:
> pdcmd 0x01 0 0xa0 0xb0 0xc0 0xd0
Host command 0x01, returned 4
a4
b3
c2
d1
Change-Id: I0969808f455574ee456d6db8a60ce9b1204a0739
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200786
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Every board other than link does the same thing - filter out the power
button event, then set the WAKE_L gpio level based on the remaining
events. This code doesn't need to be duplicated 7 times, so make it common.
Link didn't filter out the power button wake signal, but works fine
with the common implementation. Like the other boards it gets a power
button wake event via the dedicated PCH PWRBTN# signal.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=suspend link, then wake using power button press
compile all platforms; pass unit tests
Change-Id: Ib3a6d310d0f5e337374b3c331ab2872fe377bdf6
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171405
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove support for allowing host command handlers to set the response
pointer. This is just one more thing that can break (and did, on SPI
protocol V2). No commands other than the trivial read-memory-map
command in host_command.c and flash read made use of this capability,
and the savings in performance was negligible.
BUG=chrome-os-partner:21576
BRANCH=none
TEST=boot pit; still boots
Change-Id: I0a9bcf57dbea7155318fc389d7b47d3742a1a00a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64236
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This wraps the EC_HOST_EVENT_THROTTLE_START/STOP host events in a new
function called host_throttle_cpu(), similar to chipset_throttle_cpu().
That function requests the AP to throttle itself, which is less drastic than
just smacking it down from the EC.
BUG=chrome-os-partner:20805
BRANCH=falco,peppy
TEST=manual
This is a refactoring change only. All boards should still build, all tests
should still pass.
Change-Id: I871cce8f0e13230cb52eeb5e16955266f8461374
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63909
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This will fix EC flash commands on pit, once the host side (u-boot and
cros_ec driver) are upgraded to match.
This change is backwards-compatible the EC still supports the existing
version 2 protocols for talking to existing AP/kernel/ectool.
Once the AP-side supports version 3 for SPI (and existing systems are
upgraded), we will remove older SPI support since we haven't shipped a
product which uses SPI.
BUG=chrome-os-partner:20257
BRANCH=none
TEST=disable cros_ec driver support in ectool; 'ectool hello' works on link
And with an old ectool which predates this CL, 'ectool hello' also works.
On pit, from u-boot prompt, 'crosec test' and 'crosec version' work, and
keyboard works.
Change-Id: I01f193e316e9aa442fe50d632dc8a4681723e282
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58908
Reviewed-by: Simon Glass <sjg@chromium.org>
Commit-Queue: Doug Anderson <dianders@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's not used by the host command module or handlers, so shouldn't be exposed to them.
BUG=chrome-os-partner:20185
BRANCH=none
TEST='ectool hello' still works
Change-Id: I0122bd9ef33e71afab7e5cc035fb3b9d220334c6
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58632
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The flags are specific to the LPC interface and not used by the host
command module, so shouldn't be present at that level.
BUG=chrome-os-partner:20185
BRANCH=none
TEST='ectool hello' still works
Change-Id: I6b2c3208fc398ea40d9e7cc7bf5ec206b3e317d8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58631
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The WAKE# pin was being driven low when the power button was
pressed and no other events were occuring. This causes a PCIE
wake event to be observed on the host. This is incorrect. Therefore
only assert the WAKE# pin when any other event but the power button
has occured.
The implementation introduces a board-specific callback,
board_process_wake_events(), which handles the specific logic
for the wake events.
BUG=chrome-os-partner:19810
BRANCH=None
TEST=Manual. Both power button wakeup and lid events were tested. The
presence of PCIE Wake no longer exists for S5->S0 transitions.
Change-Id: If1311ccc36629b04d2d9e021c3e103e379836a3a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/56970
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On 64-bit platform, arrays should be aligned to 8 bytes. Also, change
the order of host_command fields so that it's packed on both 32-bit and
64-bit platforms.
BUG=chrome-os-partner:19257
TEST=Pass all tests. Print out and check the content of host commands.
BRANCH=None
Change-Id: I350a903bc11562d6d205c402548942f8967b75a5
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/50467
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This prevents the host from rewriting them during the checksum operation.
BUG=chrome-os-partner:13202
TEST='ectool version' should still work
BRANCH=link
Change-Id: Ib44f45b027c0a54ba40f70052728ba427dc71849
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/31511
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rather than have the send_response() handler called willy nilly from
around the EC code, provide an official function for doing this step.
BUG=chrome-os-partner:12685
BRANCH=snow,link
TEST=manual
build and boot to kernel on snow
Tried 'mkbp reset' command on snow but it did not seem to work properly
Unable to test on link at present
Change-Id: I8d9146639efb2af482d80563b403771cee961942
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30468
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This removes a bunch of unnecessary typecasts, since you can assign
to/from void * without them. This also uncovered a few cases where
const was being cast away for the input params; now fixed.
BUG=none
TEST=mkbp hash from u-boot console, and/or system boots ok
Change-Id: Ic314b9d2ca06226ea8a09703ef5c1a912eb7146d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28500
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 3bb4c6acf4ff327f956ee5e1b6deefcd84dc8fbb
Change-Id: I690baa9bcc0229502c103fc31314170bbc825f65
Reviewed-on: https://gerrit.chromium.org/gerrit/28189
Commit-Ready: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's a bit odd that the drivers package up a command to be processed
by host_command, but then host_command calls a global function to
pass the response back.
This adds ambiguity in the host_send_response() implementations as to
whether the command being responded to really is using the same
buffers that the driver set up.
Add a function pointer to the command, and have host_command call
that. Add status to the args structure also, which removes some of
the special case logic for error handling.
BUG=chrome-os-partner:11317
TEST=manual and a bit ad-hoc:
(note, this testing is not completed yet)
Check that snow and link still process commands correctly over I2C
from U-Boot. At this stage only the old interface is supported.
SMDK5250 # mkbp test
Old interface:
New interface:
Version 0: ec_command() returned error
Test failed with error -1
SMDK5250 #
Change-Id: I816738150bce3f8d78e7cd32abf361621aa12312
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28154
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 18db93b25b05c871826fd1853a33a560e64ed247
Breaks link checksums.
Change-Id: Ieeb278b7d4da0600bdc9ced1476b67f23abce1a1
Reviewed-on: https://gerrit.chromium.org/gerrit/28136
Commit-Ready: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit b983290238458f88a897ce3cfb06faae9ec79a40
Dependent on reverted change.
Change-Id: I3bb4c6acf4ff327f956ee5e1b6deefcd84dc8fbb
Reviewed-on: https://gerrit.chromium.org/gerrit/28138
Commit-Ready: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, I2C commands look like this:
Input:
cmd8 [params bytes] checksum
Output:
response8 [response_ptr bytes] checksum
Use a prefix byte of (0xDC + cmd_version) to indicate the command
version. This is compatible with the existing protocol, since there
are no host commands in the range 0xDC-0xFB. If the first byte of
the from-host data is 0x00-0xDB, it's a version 0 command.
There is no change to the output format, since the EC needs to hand
back a response which matches the version requested by the host.
New input:
(0xDC+ver8) cmd8 paramlen8 [params bytes] checksum
New output:
response8 responselen8 [response_ptr bytes] checksum
If the host gets a response of EC_RES_INVALID_COMMAND, it knows it's
talking to an old EC, and at most version 0 of the command is supported.
BUG=chrome-os-partner:11317
TEST=manual and a bit ad-hoc:
(note, this testing is not completed yet, so far only snow is tested)
Check that snow and link still process commands correctly over I2C
from U-Boot.
SMDK5250 # mkbp test
Old interface:
New interface:
Test passed
Change-Id: I1c21f2b036091e9122b4f980ca5f5af34f7fc070
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27470
|