summaryrefslogtreecommitdiff
path: root/include
Commit message (Expand)AuthorAgeFilesLines
* led_pwm: support different pwm modulesTing Shen2019-12-271-3/+6
* zork: Detect PS8802 or PS8818 retimer for USB-C1Edward Hill2019-12-261-1/+1
* retimer: Add PS8802 driverEdward Hill2019-12-261-0/+2
* power: add support for Jasperlake chipsetDivagar Mohandass2019-12-251-7/+6
* driver/usb_mux: add ANX7440 USB Type-C mux driverDivagar Mohandass2019-12-242-0/+7
* kodama: overwrite bad battery params to known good valueTing Shen2019-12-231-0/+5
* retimer: Add PS8818 driverEdward Hill2019-12-201-1/+3
* compile_time_macros: Add GENMASK and GENMASK_ULLCraig Hesling2019-12-201-0/+16
* common: Add feature flag for online calibrationYuval Peress2019-12-191-0/+32
* common: accelgyro: Add read temperature function to driverYuval Peress2019-12-181-0/+10
* common: Add sensor stillness detectorYuval Peress2019-12-183-5/+89
* usb_pd: Sending Thunderbolts-compatible host notificationAyushee2019-12-172-0/+34
* Burnside bridge retimer: Add Thunderbolt-compatible mode bitsAyushee2019-12-171-0/+16
* TCPMv1: Add support for Thunderbolt-compatible modeAyushee2019-12-174-11/+200
* cleanup: add prototype incorrectly removedJett Rink2019-12-161-0/+11
* cbi: add FW_CONFIG CBI fieldJett Rink2019-12-162-1/+3
* i2c: add support for i2c bit-bangingTing Shen2019-12-163-0/+45
* usb_pd: Rename "Externally powered" to "Unconstrained Power"Benson Leung2019-12-123-12/+12
* drivers/tcs3400: add IR scaling factorNick Vaccaro2019-12-121-1/+8
* tcpci: change connect to auto discharge disconnectDenis Brockus2019-12-122-6/+4
* usb_pd: Get current DP pin modeVijay Hiremath2019-12-111-2/+2
* console_channel.inc: Ensure CC_FP available for FP driverCraig Hesling2019-12-112-1/+10
* usb_pd_policy: Make a lot of objects commonAseda Aboagye2019-12-102-12/+149
* EC: Implementation for AP reboot from G3 state using ectool command.Sooraj Govindan2019-12-101-0/+12
* TCPMv2: Fixed PR swap request from charge managerSam Hurst2019-12-101-0/+8
* Define board_override_features_flags APIs as overridablednojiri2019-12-102-11/+6
* i2c: add generic read/modify/write operationsDenis Brockus2019-12-101-0/+51
* tcpci: add command to dump standard TCPCI registersKeith Short2019-12-091-0/+1
* fusb302: implement vbus measurement using tcpcTing Shen2019-12-092-0/+24
* usb_pd: request preferred voltage PDOYilun Lin2019-12-094-0/+72
* volteer: Enable Burnisde Bridge retimerVijay Hiremath2019-12-071-0/+3
* build_assert: use _Static_assertJett Rink2019-12-061-5/+5
* ec: remove entering_mode host commandJoel Kitching2019-12-062-10/+3
* ppc: Use hard reset to recover from CC overvoltageEdward Hill2019-12-061-0/+7
* tcpci: POWER_CTRL auto discharge disconnect initDenis Brockus2019-12-052-0/+11
* usb_mux: cleanup the usb_mux_get() functionVijay Hiremath2019-11-261-4/+2
* ec: use symbolic names instead of magic numbersPaul Fagerburg2019-11-261-2/+20
* host_command: clear any leftover dataJett Rink2019-11-261-1/+6
* usbc: make BB virtual mux retimer compatible with non-virtualDenis Brockus2019-11-254-58/+13
* Reland "smart_battery: add smbus error checking support"Ting Shen2019-11-253-0/+27
* TCPMv2: PD: Separately track each SOP and SOP' and SOP''Sam Hurst2019-11-241-2/+5
* TCPMv2: ServoV4 is not recognized appropriatelySam Hurst2019-11-221-0/+7
* battery : Define CONFIG_BATTERY_DEAD_UNTIL_VALUEYongBeum Ha2019-11-221-0/+7
* Trogdor: Initial board commitWai-Hong Tam2019-11-221-0/+1
* doc: document USB_PID strategyJett Rink2019-11-221-1/+8
* TCPMv2: Enable TCPC low power when port is looking for a connectionSam Hurst2019-11-213-3/+36
* usbc: add enter_low_power_mode for retimer muxDenis Brockus2019-11-211-0/+9
* cr50: remove flash nonvolatile counter spaceVadim Bendebury2019-11-211-4/+0
* cr50: Add support for ACVP tests of HMAC SHA-256 DRBGVadim Sukhomlinov2019-11-211-0/+5
* cr50: Add TRNG_TEST command to download entropy samples for NIST testsVadim Sukhomlinov2019-11-191-0/+2
View Lorry Controller Status