From 897ce78bddb26557a686ab9e756fcf3d6c121271 Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Mon, 24 Oct 2016 16:32:19 -0700 Subject: Fix various misspellings in comments No functional changes. BUG=none BRANCH=none TEST=make buildall passes Change-Id: Ie852feb8e3951975d99dce5a49c17f5f0e8bc791 Signed-off-by: Martin Roth Reviewed-on: https://chromium-review.googlesource.com/403417 Reviewed-by: Patrick Georgi --- board/ryu/board.h | 2 +- chip/g/sps.c | 12 ++++++------ chip/g/sps_tpm.c | 2 +- chip/g/usb.c | 2 +- chip/lm4/gpio.c | 2 +- chip/mec1322/clock.c | 2 +- chip/mec1322/lpc.c | 4 ++-- chip/npcx/hwtimer.c | 2 +- chip/npcx/i2c.c | 4 ++-- chip/npcx/lpc.c | 2 +- chip/stm32/adc-stm32f0.c | 2 +- chip/stm32/uart.c | 2 +- chip/stm32/usart-stm32f0.c | 2 +- chip/stm32/usart_rx_dma.h | 6 +++--- chip/stm32/usart_tx_dma.h | 2 +- chip/stm32/usb.c | 2 +- common/charge_manager.c | 2 +- common/fmap.c | 2 +- common/gesture.c | 2 +- common/i2c.c | 2 +- common/main.c | 2 +- common/pd_log.c | 2 +- common/spi_nor.c | 4 ++-- common/tpm_registers.c | 4 ++-- common/usb_pd_protocol.c | 4 ++-- common/usb_pd_tcpc.c | 2 +- core/cortex-m/cpu.h | 2 +- core/minute-ia/cpu.h | 2 +- core/minute-ia/interrupts.h | 4 ++-- core/nds32/cpu.h | 2 +- driver/accelgyro_bmi160.c | 2 +- driver/charger/bq24725.c | 2 +- driver/charger/bq24735.c | 2 +- driver/charger/bq24738.c | 2 +- driver/pmu_tps65090_charger.c | 6 +++--- driver/temp_sensor/tmp006.c | 2 +- include/accelgyro.h | 6 +++--- include/battery_smart.h | 2 +- include/charger.h | 2 +- include/host_command.h | 2 +- include/i2c.h | 2 +- include/led_common.h | 2 +- include/smbus.h | 4 ++-- power/tegra.c | 4 ++-- util/ec3po/console_unittest.py | 2 +- util/openocd/npcx_cmds.tcl | 4 ++-- util/stm32mon.c | 2 +- 47 files changed, 67 insertions(+), 67 deletions(-) diff --git a/board/ryu/board.h b/board/ryu/board.h index 1e8be353dc..1658a98c1e 100644 --- a/board/ryu/board.h +++ b/board/ryu/board.h @@ -220,7 +220,7 @@ enum power_signal { POWER_SIGNAL_COUNT }; -/* Sensor index defintion */ +/* Sensor index definition */ enum sensor_id { RYU_LID_ACCEL, RYU_LID_GYRO, diff --git a/chip/g/sps.c b/chip/g/sps.c index 82336eb5a7..21558a6822 100644 --- a/chip/g/sps.c +++ b/chip/g/sps.c @@ -44,7 +44,7 @@ /* * Hardware pointers use one extra bit, which means that indexing FIFO and - * values written into the pointers have to have dfferent sizes. Tracked under + * values written into the pointers have to have different sizes. Tracked under * http://b/20894690 */ #define SPS_FIFO_PTR_MASK ((SPS_FIFO_MASK << 1) | 1) @@ -118,7 +118,7 @@ int sps_transmit(uint8_t *data, size_t data_size) /* * CR50 SPS controller does not allow byte * accesses for writes into the FIFO, so read - * modify/write is requred. Tracked uder + * modify/write is required. Tracked under * http://b/20894727 */ bit_shift = 8 * (wptr & 3); @@ -151,7 +151,7 @@ int sps_transmit(uint8_t *data, size_t data_size) /* * Start TX if necessary. This happens after FIFO is primed, which - * helps aleviate TX underrun problems but introduces delay before + * helps alleviate TX underrun problems but introduces delay before * data starts coming out. */ if (!GREAD_FIELD(SPS, FIFO_CTRL, TXFIFO_EN)) @@ -290,7 +290,7 @@ static void sps_advance_rx(int port, int data_size) /* * Actual receive interrupt processing function. Invokes the callback passing * it a pointer to the linear space in the RX FIFO and the number of bytes - * availabe at that address. + * available at that address. * * If RX fifo is wrapping around, the callback will be called twice with two * flat pointers. @@ -363,7 +363,7 @@ DECLARE_IRQ(GC_IRQNUM_SPS0_RXFIFO_LVL_INTR, _sps0_interrupt, 1); */ /* - * Receive callback implemets a simple state machine, it could be in one of + * Receive callback implements a simple state machine, it could be in one of * three states: not started, receiving frame, frame finished. */ @@ -483,7 +483,7 @@ static int command_sps(int argc, char **argv) /* * Wait for receive state machine to transition out of 'frame - * finised' state. + * finished' state. */ while (rx_state == spstrx_finished) { watchdog_reload(); diff --git a/chip/g/sps_tpm.c b/chip/g/sps_tpm.c index 771ae847b1..8658ffc041 100644 --- a/chip/g/sps_tpm.c +++ b/chip/g/sps_tpm.c @@ -131,7 +131,7 @@ static void init_new_cycle(void) enable_sleep(SLEEP_MASK_SPI); } -/* Extract R/W bit, register addresss, and data count from 4-byte header */ +/* Extract R/W bit, register address, and data count from 4-byte header */ static int header_says_to_read(uint8_t *data, uint32_t *reg, uint32_t *count) { uint32_t addr = data[1]; /* reg address is MSB first */ diff --git a/chip/g/usb.c b/chip/g/usb.c index 43f10f0968..0fc4f62242 100644 --- a/chip/g/usb.c +++ b/chip/g/usb.c @@ -907,7 +907,7 @@ static void ep0_interrupt(uint32_t intr_on_out, uint32_t intr_on_in) /* * The Programmer's Guide says (p291) to stall any * further INs, but that's stupid because it'll destroy - * the packet we just tranferred to SPRAM, so don't do + * the packet we just transferred to SPRAM, so don't do * that (we tried it anyway, and Bad Things happened). * Also don't stop here, but keep looking at stuff. */ diff --git a/chip/lm4/gpio.c b/chip/lm4/gpio.c index 97e886294b..1b1e0a80c6 100644 --- a/chip/lm4/gpio.c +++ b/chip/lm4/gpio.c @@ -83,7 +83,7 @@ test_mockable int gpio_get_level(enum gpio_signal signal) void gpio_set_level(enum gpio_signal signal, int value) { /* - * Ok to write 0xff becuase LM4_GPIO_DATA bit-masks only the bit + * Ok to write 0xff because LM4_GPIO_DATA bit-masks only the bit * we care about. */ LM4_GPIO_DATA(gpio_list[signal].port, diff --git a/chip/mec1322/clock.c b/chip/mec1322/clock.c index 0fcb411d23..1cb0bc4aaf 100644 --- a/chip/mec1322/clock.c +++ b/chip/mec1322/clock.c @@ -105,7 +105,7 @@ static void htimer_init(void) { MEC1322_INT_BLK_EN |= 1 << 17; MEC1322_INT_ENABLE(17) |= 1 << 20; /* GIRQ=17, aggregator bit = 20 */ - MEC1322_HTIMER_PRELOAD = 0; /* disable at begining */ + MEC1322_HTIMER_PRELOAD = 0; /* disable at beginning */ task_enable_irq(MEC1322_IRQ_HTIMER); } diff --git a/chip/mec1322/lpc.c b/chip/mec1322/lpc.c index 298a161762..3ce2717222 100644 --- a/chip/mec1322/lpc.c +++ b/chip/mec1322/lpc.c @@ -244,7 +244,7 @@ static void setup_lpc(void) /* Set up 8042 interface at 0x60/0x64 */ MEC1322_LPC_8042_BAR = 0x00608104; - /* Set up indication of Auxillary sts */ + /* Set up indication of Auxiliary sts */ MEC1322_8042_KB_CTRL |= 1 << 7; MEC1322_8042_ACT |= 1; @@ -630,7 +630,7 @@ static void lpc_clear_host_events(void) * the chipset_suspend is called. * * The chipset_in_state(CHIPSET_STATE_STANDBY | CHIPSET_STATE_ON) - * is used to detect the S0ix transiton. + * is used to detect the S0ix transition. * * During S0ix entry, the wake mask for lid open is enabled. * diff --git a/chip/npcx/hwtimer.c b/chip/npcx/hwtimer.c index 366f1624f4..ac5a301019 100644 --- a/chip/npcx/hwtimer.c +++ b/chip/npcx/hwtimer.c @@ -139,7 +139,7 @@ uint32_t __hw_clock_get_sleep_time(uint16_t pre_evt_cnt) uint32_t sleep_time; uint16_t cnt = __hw_clock_event_count(); - /* Event has been triggered but timer ISR dosen't handle it */ + /* Event has been triggered but timer ISR doesn't handle it */ if (IS_BIT_SET(NPCX_ITCTS(ITIM_EVENT_NO), NPCX_ITCTS_TO_STS)) sleep_time = FP_TO_INT((fp_inter_t)(pre_evt_cnt+1) * evt_tick); /* Event hasn't been triggered */ diff --git a/chip/npcx/i2c.c b/chip/npcx/i2c.c index 993b3565e4..d697c46045 100644 --- a/chip/npcx/i2c.c +++ b/chip/npcx/i2c.c @@ -38,7 +38,7 @@ */ #define I2C_MIN_TIMEOUT 25 -/* Marco functions of I2C */ +/* Macro functions of I2C */ #define I2C_START(ctrl) SET_BIT(NPCX_SMBCTL1(ctrl), NPCX_SMBCTL1_START) #define I2C_STOP(ctrl) SET_BIT(NPCX_SMBCTL1(ctrl), NPCX_SMBCTL1_STOP) #define I2C_NACK(ctrl) SET_BIT(NPCX_SMBCTL1(ctrl), NPCX_SMBCTL1_ACK) @@ -66,7 +66,7 @@ enum smb_error { /* * Internal SMBus Interface driver states values, which reflect events - * which occured on the bus + * which occurred on the bus */ enum smb_oper_state_t { SMB_IDLE, diff --git a/chip/npcx/lpc.c b/chip/npcx/lpc.c index d893218640..8885013195 100644 --- a/chip/npcx/lpc.c +++ b/chip/npcx/lpc.c @@ -878,7 +878,7 @@ void lpc_lreset_pltrst_handler(void) pltrst_asserted ? "" : "de"); /* - * Once LRESET is de-asserted (low -> high), we need to intialize lpc + * Once LRESET is de-asserted (low -> high), we need to initialize lpc * settings once. If RSTCTL_LRESET_PLTRST_MODE is active, LPC registers * won't be reset by Host domain reset but Core domain does. */ diff --git a/chip/stm32/adc-stm32f0.c b/chip/stm32/adc-stm32f0.c index fc6c11f334..cffae10fd9 100644 --- a/chip/stm32/adc-stm32f0.c +++ b/chip/stm32/adc-stm32f0.c @@ -169,7 +169,7 @@ static int adc_enable_watchdog_no_lock(void) (watchdog_ain_id << 26); adc_configure(watchdog_ain_id); - /* Clear AWD interupt flag */ + /* Clear AWD interrupt flag */ STM32_ADC_ISR = 0x80; /* Set Watchdog enable bit on a single channel */ STM32_ADC_CFGR1 |= STM32_ADC_CFGR1_AWDEN | STM32_ADC_CFGR1_AWDSGL; diff --git a/chip/stm32/uart.c b/chip/stm32/uart.c index a957686687..de92454369 100644 --- a/chip/stm32/uart.c +++ b/chip/stm32/uart.c @@ -165,7 +165,7 @@ void uart_interrupt(void) { #ifndef CONFIG_UART_TX_DMA /* - * When trasmission completes, enable sleep if we are done with Tx. + * When transmission completes, enable sleep if we are done with Tx. * After that, proceed if there is other interrupt to handle. */ if (STM32_USART_SR(UARTN_BASE) & STM32_USART_SR_TC) { diff --git a/chip/stm32/usart-stm32f0.c b/chip/stm32/usart-stm32f0.c index 4b24e49642..8ae2085498 100644 --- a/chip/stm32/usart-stm32f0.c +++ b/chip/stm32/usart-stm32f0.c @@ -46,7 +46,7 @@ static void usart_variant_disable(struct usart_config const *config) int index = config->hw->index; /* - * Only disable the shared interupt for USART3/4 if both USARTs are + * Only disable the shared interrupt for USART3/4 if both USARTs are * now disabled. */ if ((index == 0) || diff --git a/chip/stm32/usart_rx_dma.h b/chip/stm32/usart_rx_dma.h index 8056c2635e..a5a04e2829 100644 --- a/chip/stm32/usart_rx_dma.h +++ b/chip/stm32/usart_rx_dma.h @@ -38,7 +38,7 @@ * to use for the DMA circular buffer. This buffer must be large enough to * hide the worst case interrupt latency the system will encounter. The DMA * RX driver adds to the output of the usart_info command a high water mark - * of how many bytes were transfered out of this FIFO on any one interrupt. + * of how many bytes were transferred out of this FIFO on any one interrupt. * This value can be used to correctly size the FIFO by setting the FIFO_SIZE * to something large, stress test the USART, and run usart_info. After a * reasonable stress test the "DMA RX max_bytes" value will be a reasonable @@ -73,7 +73,7 @@ struct usart_rx_dma_state { size_t index; /* - * Maximum number of bytes transfered in any one RX interrupt. + * Maximum number of bytes transferred in any one RX interrupt. */ uint32_t max_bytes; }; @@ -94,7 +94,7 @@ struct usart_rx_dma { }; /* - * Function pointers needed to intialize a usart_rx struct. These shouldn't + * Function pointers needed to initialize a usart_rx struct. These shouldn't * be called in any other context as they assume that the producer or config * that they are passed was initialized with a complete usart_rx_dma struct. */ diff --git a/chip/stm32/usart_tx_dma.h b/chip/stm32/usart_tx_dma.h index 1dd3d7da41..33a97395ad 100644 --- a/chip/stm32/usart_tx_dma.h +++ b/chip/stm32/usart_tx_dma.h @@ -79,7 +79,7 @@ struct usart_tx_dma { }; /* - * Function pointers needed to intialize a usart_tx struct. These shouldn't + * Function pointers needed to initialize a usart_tx struct. These shouldn't * be called in any other context as they assume that the consumer or config * that they are passed was initialized with a complete usart_tx_dma struct. */ diff --git a/chip/stm32/usb.c b/chip/stm32/usb.c index a3de00f53a..dbbc800ffe 100644 --- a/chip/stm32/usb.c +++ b/chip/stm32/usb.c @@ -326,7 +326,7 @@ void usb_init(void) /* Enable interrupt handlers */ task_enable_irq(STM32_IRQ_USB_LP); - /* set interrupts mask : reset/correct tranfer/errors */ + /* set interrupts mask : reset/correct transfer/errors */ STM32_USB_CNTR = 0xe400; #ifdef CONFIG_USB_SERIALNO diff --git a/common/charge_manager.c b/common/charge_manager.c index fa3a16c321..a4d9d8dea4 100644 --- a/common/charge_manager.c +++ b/common/charge_manager.c @@ -823,7 +823,7 @@ void charge_manager_set_ceil(int port, enum ceil_requestor requestor, int ceil) * * @param port Charge port to select as override, or * OVERRIDE_OFF to select no override port, - * or OVERRIDE_DONT_CHARGE to specifc that no + * or OVERRIDE_DONT_CHARGE to specific that no * charge port should be selected. */ int charge_manager_set_override(int port) diff --git a/common/fmap.c b/common/fmap.c index c76b6621d3..6f84c37b63 100644 --- a/common/fmap.c +++ b/common/fmap.c @@ -152,7 +152,7 @@ const struct _ec_fmap { * ASCII, and padded with \0. * TODO: Get the relative offset of * __version_struct_offset within our RW image to - * accomodate image asymmetry. + * accommodate image asymmetry. */ .area_name = "RW_FWID", .area_offset = CONFIG_EC_WRITABLE_STORAGE_OFF - diff --git a/common/gesture.c b/common/gesture.c index 157e3c1f5a..8d9c744cf7 100644 --- a/common/gesture.c +++ b/common/gesture.c @@ -94,7 +94,7 @@ static int gesture_tap_for_battery(void) /* * Running sums of data diffs for inner and outer windows. - * Z data kept seperate from X and Y data + * Z data kept separate from X and Y data */ static int sum_z_inner, sum_z_outer, sum_xy_inner, sum_xy_outer; diff --git a/common/i2c.c b/common/i2c.c index af2aa61133..165f343aa1 100644 --- a/common/i2c.c +++ b/common/i2c.c @@ -27,7 +27,7 @@ #define CPUTS(outstr) cputs(CC_I2C, outstr) #define CPRINTS(format, args...) cprints(CC_I2C, format, ## args) -/* Only chips with multi-port controllers will define I2C_CONTROLER_COUNT */ +/* Only chips with multi-port controllers will define I2C_CONTROLLER_COUNT */ #ifndef I2C_CONTROLLER_COUNT #define I2C_CONTROLLER_COUNT I2C_PORT_COUNT #endif diff --git a/common/main.c b/common/main.c index 4c5d580ddd..513832f04f 100644 --- a/common/main.c +++ b/common/main.c @@ -137,7 +137,7 @@ test_mockable __keep int main(void) #ifdef CONFIG_WATCHDOG /* - * Intialize watchdog timer. All lengthy operations between now and + * Initialize watchdog timer. All lengthy operations between now and * task_start() must periodically call watchdog_reload() to avoid * triggering a watchdog reboot. (This pretty much applies only to * verified boot, because all *other* lengthy operations should be done diff --git a/common/pd_log.c b/common/pd_log.c index 7cbcf0c49a..2acf7bf8f7 100644 --- a/common/pd_log.c +++ b/common/pd_log.c @@ -20,7 +20,7 @@ BUILD_ASSERT(POWER_OF_TWO(LOG_SIZE)); /* * The FIFO pointers are defined as following : * "log_head" is the next available event to dequeue. - * "log_tail" is marking the end of the FIFO content (after last commited event) + * "log_tail" is marking the end of the FIFO content (after last committed event) * "log_tail_next" is the next available spot to enqueue events. * The pointers are not wrapped until they are used, so we don't need an extra * entry to disambiguate between full and empty FIFO. diff --git a/common/spi_nor.c b/common/spi_nor.c index dc69b19c3c..bd8983bcd7 100644 --- a/common/spi_nor.c +++ b/common/spi_nor.c @@ -141,7 +141,7 @@ static int spi_nor_read_jedec_id(const struct spi_nor_device_t *spi_nor_device, return rv; *out_mfn_bank = 0; - /* Go through the JEDEC ID a byate a time to looking for a manufacturer + /* Go through the JEDEC ID a byte a time to looking for a manufacturer * ID instead of the next bank indicator (0x7F). */ for (i = 0; i < SPI_NOR_JEDEC_ID_BANKS; i++) { *out_mfn_id = jedec_id[i]; @@ -412,7 +412,7 @@ int spi_nor_init(void) int rv = EC_SUCCESS; size_t i; - /* Initiailize the state for each serial NOR flash device. */ + /* Initialize the state for each serial NOR flash device. */ for (i = 0; i < SPI_NOR_DEVICE_COUNT; i++) { uint8_t sfdp_major_rev, sfdp_minor_rev; uint8_t table_major_rev, table_minor_rev; diff --git a/common/tpm_registers.c b/common/tpm_registers.c index b5c5f8b7e5..ba7cec183f 100644 --- a/common/tpm_registers.c +++ b/common/tpm_registers.c @@ -324,7 +324,7 @@ static void fifo_reg_write(const uint8_t *data, uint32_t data_size) struct tpm_cmd_header *tpmh; /* - * Make sure we are in the approriate sate, otherwise ignore this + * Make sure we are in the appropriate state, otherwise ignore this * access. */ if ((tpm_.state == tpm_state_ready) && (tpm_.fifo_write_index == 0)) @@ -363,7 +363,7 @@ static void fifo_reg_write(const uint8_t *data, uint32_t data_size) return; } - /* All data has been receved, Ready for the 'go' command. */ + /* All data has been received, Ready for the 'go' command. */ tpm_.regs.sts &= ~expect; } diff --git a/common/usb_pd_protocol.c b/common/usb_pd_protocol.c index 4b49f0772e..d0773724e2 100644 --- a/common/usb_pd_protocol.c +++ b/common/usb_pd_protocol.c @@ -104,7 +104,7 @@ enum pd_dual_role_states drp_state = PD_DRP_TOGGLE_OFF; static uint32_t pd_src_caps[CONFIG_USB_PD_PORT_COUNT][PDO_MAX_OBJECTS]; static int pd_src_cap_cnt[CONFIG_USB_PD_PORT_COUNT]; -/* Enable varible for Try.SRC states */ +/* Enable variable for Try.SRC states */ static uint8_t pd_try_src_enable; #endif @@ -1895,7 +1895,7 @@ void pd_task(void) /* Send source cap some minimum number of times */ if (caps_count < PD_CAPS_COUNT) { - /* Query capabilites of the other side */ + /* Query capabilities of the other side */ res = send_source_cap(port); /* packet was acked => PD capable device) */ if (res >= 0) { diff --git a/common/usb_pd_tcpc.c b/common/usb_pd_tcpc.c index 8620138a64..a9ce499dbc 100644 --- a/common/usb_pd_tcpc.c +++ b/common/usb_pd_tcpc.c @@ -418,7 +418,7 @@ static int send_validate_message(int port, uint16_t header, * we have received a good packet * but not the expected GoodCRC, * the other side is trying to contact us, - * bail out immediatly so we can get the retry. + * bail out immediately so we can get the retry. */ return PD_TX_ERR_INV_ACK; } diff --git a/core/cortex-m/cpu.h b/core/cortex-m/cpu.h index 2951f4b5e0..07e1c4b543 100644 --- a/core/cortex-m/cpu.h +++ b/core/cortex-m/cpu.h @@ -2,7 +2,7 @@ * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * - * Registers map and defintions for Cortex-MLM4x processor + * Registers map and definitions for Cortex-MLM4x processor */ #ifndef __CROS_EC_CPU_H diff --git a/core/minute-ia/cpu.h b/core/minute-ia/cpu.h index d2046fccb7..859a192dcf 100644 --- a/core/minute-ia/cpu.h +++ b/core/minute-ia/cpu.h @@ -2,7 +2,7 @@ * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * - * Registers map and defintions for mIA LM2 processor + * Registers map and definitions for mIA LM2 processor */ #ifndef __CROS_EC_CPU_H diff --git a/core/minute-ia/interrupts.h b/core/minute-ia/interrupts.h index c878a90968..1685fdc51a 100644 --- a/core/minute-ia/interrupts.h +++ b/core/minute-ia/interrupts.h @@ -2,7 +2,7 @@ * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * - * Registers map and defintions for mIA LM2 processor + * Registers map and definitions for mIA LM2 processor */ #ifndef __CROS_EC_IA32_INTERRUPTS_H @@ -39,7 +39,7 @@ typedef struct { /* Default flags setting for entries in the IDT. * 7 - Present bit - * 6:5 - Descriptor privilage level + * 6:5 - Descriptor privilege level * 4 - Storage segment (0 for interrupt gate) * 3:0 - Gate type (1110 = Interrupt gate) */ diff --git a/core/nds32/cpu.h b/core/nds32/cpu.h index ada87cf716..2246ec7f77 100644 --- a/core/nds32/cpu.h +++ b/core/nds32/cpu.h @@ -2,7 +2,7 @@ * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * - * Registers map and defintions for Andes cores + * Registers map and definitions for Andes cores */ #ifndef __CROS_EC_CPU_H diff --git a/driver/accelgyro_bmi160.c b/driver/accelgyro_bmi160.c index da94b301eb..589206414e 100644 --- a/driver/accelgyro_bmi160.c +++ b/driver/accelgyro_bmi160.c @@ -809,7 +809,7 @@ static int config_interrupt(const struct motion_sensor_t *s) BMI160_INT2_INPUT_EN | BMI160_LATCH_5MS); #endif - /* configure int1 as an interupt */ + /* configure int1 as an interrupt */ ret = raw_write8(s->port, s->addr, BMI160_INT_OUT_CTRL, BMI160_INT_CTRL(1, OUTPUT_EN)); diff --git a/driver/charger/bq24725.c b/driver/charger/bq24725.c index 794d4f9a02..3b88207046 100644 --- a/driver/charger/bq24725.c +++ b/driver/charger/bq24725.c @@ -19,7 +19,7 @@ #define REG_TO_CURRENT(REG, RS) ((REG) * DEFAULT_SENSE_RESISTOR / (RS)) #define CURRENT_TO_REG(CUR, RS) ((CUR) * (RS) / DEFAULT_SENSE_RESISTOR) -/* Charger infomation +/* Charger information * charge voltage bitmask: 0111 1111 1111 0000 * charge current bitmask: 0001 1111 1000 0000 * input current bitmask : 0000 0000 1000 0000 diff --git a/driver/charger/bq24735.c b/driver/charger/bq24735.c index 24a71c1deb..4279397330 100644 --- a/driver/charger/bq24735.c +++ b/driver/charger/bq24735.c @@ -20,7 +20,7 @@ #define REG_TO_CURRENT(REG, RS) ((REG) * DEFAULT_SENSE_RESISTOR / (RS)) #define CURRENT_TO_REG(CUR, RS) ((CUR) * (RS) / DEFAULT_SENSE_RESISTOR) -/* Charger infomation +/* Charger information * charge voltage bitmask: 0111 1111 1111 0000 * charge current bitmask: 0001 1111 1000 0000 * input current bitmask : 0000 0000 1000 0000 diff --git a/driver/charger/bq24738.c b/driver/charger/bq24738.c index 752b8b0457..594257f833 100644 --- a/driver/charger/bq24738.c +++ b/driver/charger/bq24738.c @@ -19,7 +19,7 @@ #define REG_TO_CURRENT(REG, RS) ((REG) * DEFAULT_SENSE_RESISTOR / (RS)) #define CURRENT_TO_REG(CUR, RS) ((CUR) * (RS) / DEFAULT_SENSE_RESISTOR) -/* Charger infomation +/* Charger information * charge voltage bitmask: 0111 1111 1111 0000 * charge current bitmask: 0001 1111 1100 0000 * input current bitmask : 0000 0000 1000 0000 diff --git a/driver/pmu_tps65090_charger.c b/driver/pmu_tps65090_charger.c index 6e56ef98ff..695b8a4897 100644 --- a/driver/pmu_tps65090_charger.c +++ b/driver/pmu_tps65090_charger.c @@ -205,7 +205,7 @@ static int calc_next_state(int state) case ST_IDLE0: case ST_BAD_COND: case ST_IDLE: - /* Check AC and chiset state */ + /* Check AC and chipset state */ if (!extpower_is_present()) { if (chipset_in_state(CHIPSET_STATE_ON)) return ST_DISCHARGING; @@ -429,8 +429,8 @@ void charger_task(void) #endif /* * When battery is extremely low, the internal voltage can not - * power on its gas guage IC. Charging loop will enable the - * charger and turn on trickle charging. For safty reason, + * power on its gas gauge IC. Charging loop will enable the + * charger and turn on trickle charging. For safety reason, * charger should be disabled if the communication to battery * failed. */ diff --git a/driver/temp_sensor/tmp006.c b/driver/temp_sensor/tmp006.c index 9801963ff5..67b31dfa98 100644 --- a/driver/temp_sensor/tmp006.c +++ b/driver/temp_sensor/tmp006.c @@ -173,7 +173,7 @@ static int tmp006_read_die_temp_k(const struct tmp006_data_t *tdata, } /* - * This uses Tdie and Vobj and a bunch of magic parameters to calulate the + * This uses Tdie and Vobj and a bunch of magic parameters to calculate the * object temperature, Tobj. */ static int tmp006_read_object_temp_k(struct tmp006_data_t *tdata, diff --git a/include/accelgyro.h b/include/accelgyro.h index 0432a0e896..883516bb3e 100644 --- a/include/accelgyro.h +++ b/include/accelgyro.h @@ -97,7 +97,7 @@ struct accelgyro_drv { * @event Event to process. May add other events for the next processor. * * Return EC_SUCCESS when one event is handled, EC_ERROR_NOT_HANDLED - * when no events have been proccessed. + * when no events have been processed. */ int (*irq_handler)(struct motion_sensor_t *s, uint32_t *event); #endif @@ -106,7 +106,7 @@ struct accelgyro_drv { * Retrieve hardware FIFO from sensor, * - put data in Sensor Hub fifo. * - update sensor raw_xyz vector with the last information. - * We put raw data in hub fifo and process data from theres. + * We put raw data in hub fifo and process data from there. * @s Pointer to sensor data. */ int (*load_fifo)(struct motion_sensor_t *s); @@ -118,7 +118,7 @@ struct accelgyro_drv { * @s Pointer to sensor data. * @activity activity to work on * @enable 1 to enable, 0 to disable - * @data addtional data if needed, activity dependant. + * @data additional data if needed, activity dependent. */ int (*manage_activity)(const struct motion_sensor_t *s, enum motionsensor_activity activity, diff --git a/include/battery_smart.h b/include/battery_smart.h index 72b4cf6544..94b291b4d9 100644 --- a/include/battery_smart.h +++ b/include/battery_smart.h @@ -56,7 +56,7 @@ #define SB_DEVICE_NAME 0x21 #define SB_DEVICE_CHEMISTRY 0x22 #define SB_MANUFACTURER_DATA 0x23 -/* Extention of smart battery spec, may not be supported on all platforms */ +/* Extension of smart battery spec, may not be supported on all platforms */ #define SB_ALT_MANUFACTURER_ACCESS 0x44 /* Battery mode */ diff --git a/include/charger.h b/include/charger.h index a98e3e0f99..86ff5edc34 100644 --- a/include/charger.h +++ b/include/charger.h @@ -10,7 +10,7 @@ #include "common.h" -/* Charger infomation +/* Charger information * voltage unit: mV * current unit: mA */ diff --git a/include/host_command.h b/include/host_command.h index c9dcd3ddd8..9df4689f24 100644 --- a/include/host_command.h +++ b/include/host_command.h @@ -162,7 +162,7 @@ void host_clear_events(uint32_t mask); uint32_t host_get_events(void); /** - * Send a response to the relevent driver for transmission + * Send a response to the relevant driver for transmission * * Once command processing is complete, this is used to send a response * back to the host. diff --git a/include/i2c.h b/include/i2c.h index 1514ce8f1a..38e632e38e 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -274,7 +274,7 @@ int i2c_unwedge(int port); * Read bytestream from : with format: * [length_N] [byte_0] [byte_1] ... [byte_N-1] * - * : the max length of receving buffer. to read N bytes + * : the max length of receiving buffer. to read N bytes * ascii, len should be at least N+1 to include the * terminating 0. * == 0 : buffer size > 255 diff --git a/include/led_common.h b/include/led_common.h index 51230fbeb3..964ad3bf02 100644 --- a/include/led_common.h +++ b/include/led_common.h @@ -17,7 +17,7 @@ extern const enum ec_led_id supported_led_ids[]; extern const int supported_led_ids_count; /** - * Enable or diable automatic control of an LED. + * Enable or disable automatic control of an LED. * * @param led_id ID of LED to enable or disable automatic control. * @param enable 1 to enable . 0 to disable diff --git a/include/smbus.h b/include/smbus.h index 367ceceb8d..15d42084b0 100644 --- a/include/smbus.h +++ b/include/smbus.h @@ -126,7 +126,7 @@ int smbus_read_word(uint8_t i2c_port, uint8_t slave_addr, * @param plen uint8_t *, a pointer data length * @return error_code * EC_SUCCESS if success; none-zero if fail - * EC_ERROR_BUSY if interface is bussy + * EC_ERROR_BUSY if interface is busy * none zero error code if fail */ int smbus_read_block(uint8_t i2c_port, uint8_t slave_addr, @@ -138,7 +138,7 @@ int smbus_read_block(uint8_t i2c_port, uint8_t slave_addr, * Read bytestream from : with format: * [length_N] [byte_0] [byte_1] ... [byte_N-1][byte_N='\0'] * - * : the max length of receving buffer. to read N bytes + * : the max length of receiving buffer. to read N bytes * ascii, len should be at least N+1 to include the * terminating 0 (NULL). * diff --git a/power/tegra.c b/power/tegra.c index 431ccd3da0..8f6ba9e4b1 100644 --- a/power/tegra.c +++ b/power/tegra.c @@ -120,7 +120,7 @@ static void chipset_turn_off_power_rails(void); /** * Set the AP RESET signal. * - * This fucntion is for backward-compatible. + * This function is for backward-compatibility. * * AP_RESET_L (PB3) is stuffed before rev <= 2.0 and connected to PMIC RESET. * After rev >= 2.2, this is removed. This should not effected the new board. @@ -180,7 +180,7 @@ static int check_for_power_off_event(void) pressed = 1; } else if (power_request == POWER_REQ_OFF) { power_request = POWER_REQ_NONE; - return 4; /* return non-zero for shudown down */ + return 4; /* return non-zero for shutdown */ } now = get_time(); diff --git a/util/ec3po/console_unittest.py b/util/ec3po/console_unittest.py index 82bf4ba212..768417df8f 100755 --- a/util/ec3po/console_unittest.py +++ b/util/ec3po/console_unittest.py @@ -587,7 +587,7 @@ class TestConsoleEditingMethods(unittest.TestCase): # Perform the same verification. CheckInputBufferPosition(self, len(test_str)) - # We expect to see the test string, a jump to the begining of the line, and + # We expect to see the test string, a jump to the beginning of the line, and # one jump to the end of the line. exp_console_out = test_str # Jump to beginning. diff --git a/util/openocd/npcx_cmds.tcl b/util/openocd/npcx_cmds.tcl index a21b804997..579aa3834e 100644 --- a/util/openocd/npcx_cmds.tcl +++ b/util/openocd/npcx_cmds.tcl @@ -82,7 +82,7 @@ proc flash_npcx_ro {chip_name image_dir image_offset} { # Halt CPU first halt - # diable MPU for Data RAM + # disable MPU for Data RAM mww $MPU_RNR 0x1 mww $MPU_RASR 0x0 @@ -109,7 +109,7 @@ proc flash_npcx_all {chip_name image_dir image_offset} { # Halt CPU first halt - # diable MPU for Data RAM + # disable MPU for Data RAM mww $MPU_RNR 0x1 mww $MPU_RASR 0x0 diff --git a/util/stm32mon.c b/util/stm32mon.c index 36b968f2c5..d38b0ed930 100644 --- a/util/stm32mon.c +++ b/util/stm32mon.c @@ -144,7 +144,7 @@ int open_serial(const char *port) /* * tcsetattr() returns success if any of the modifications succeed, so * its return value of zero is not an indication of success, one needs - * to check the result explicitely. + * to check the result explicitly. */ tcsetattr(fd, TCSANOW, &cfg); if (tcgetattr(fd, &cfg)) { -- cgit v1.2.1