From bdfcd16324befc954baeb06e63e2c5bd32d568ab Mon Sep 17 00:00:00 2001 From: David Wu Date: Tue, 28 Apr 2020 09:24:22 +0800 Subject: trondo: Initial EC image Create the initial EC image for the trondo variant by copying the volteer reference board EC files into a new directory named for the variant. (Auto-Generated by create_initial_ec_image.sh version 1.0.2). BUG=b:154678884 BRANCH=none TEST=make BOARD=trondo Change-Id: Ieb391f3d6b8f61e2b6be01bf8cf5a0cb4f618f97 Signed-off-by: David Wu Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2169666 Reviewed-by: Keith Short Commit-Queue: Keith Short --- board/trondo/battery.c | 68 ++++++++++++ board/trondo/board.c | 225 ++++++++++++++++++++++++++++++++++++++ board/trondo/board.h | 156 +++++++++++++++++++++++++++ board/trondo/build.mk | 34 ++++++ board/trondo/ec.tasklist | 26 +++++ board/trondo/gpio.inc | 188 ++++++++++++++++++++++++++++++++ board/trondo/led.c | 103 ++++++++++++++++++ board/trondo/power_sequence.c | 183 +++++++++++++++++++++++++++++++ board/trondo/sensors.c | 243 ++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 1226 insertions(+) create mode 100644 board/trondo/battery.c create mode 100644 board/trondo/board.c create mode 100644 board/trondo/board.h create mode 100644 board/trondo/build.mk create mode 100644 board/trondo/ec.tasklist create mode 100644 board/trondo/gpio.inc create mode 100644 board/trondo/led.c create mode 100644 board/trondo/power_sequence.c create mode 100644 board/trondo/sensors.c diff --git a/board/trondo/battery.c b/board/trondo/battery.c new file mode 100644 index 0000000000..9b356a8efd --- /dev/null +++ b/board/trondo/battery.c @@ -0,0 +1,68 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + * + * Battery pack vendor provided charging profile + */ + +#include "battery_fuel_gauge.h" +#include "common.h" +#include "util.h" + +/* + * Battery info for all Volteer battery types. Note that the fields + * start_charging_min/max and charging_min/max are not used for the charger. + * The effective temperature limits are given by discharging_min/max_c. + * + * Fuel Gauge (FG) parameters which are used for determining if the battery + * is connected, the appropriate ship mode (battery cutoff) command, and the + * charge/discharge FETs status. + * + * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery + * register. For some batteries, the charge/discharge FET bits are set when + * charging/discharging is active, in other types, these bits set mean that + * charging/discharging is disabled. Therefore, in addition to the mask for + * these bits, a disconnect value must be specified. Note that for TI fuel + * gauge, the charge/discharge FET status is found in Operation Status (0x54), + * but a read of Manufacturer Access (0x00) will return the lower 16 bits of + * Operation status which contains the FET status bits. + * + * The assumption for battery types supported is that the charge/discharge FET + * status can be read with a sb_read() command and therefore, only the register + * address, mask, and disconnect value need to be provided. + */ +const struct board_batt_params board_battery_info[] = { + /* LGC\011 L17L3PB0 Battery Information */ + /* + * Battery info provided by ODM on b/143477210, comment #11 + */ + [BATTERY_LGC011] = { + .fuel_gauge = { + .manuf_name = "LGC", + .ship_mode = { + .reg_addr = 0x00, + .reg_data = { 0x10, 0x10 }, + }, + .fet = { + .reg_addr = 0x0, + .reg_mask = 0x6000, + .disconnect_val = 0x6000, + } + }, + .batt_info = { + .voltage_max = TARGET_WITH_MARGIN(13200, 5), + .voltage_normal = 11550, /* mV */ + .voltage_min = 9000, /* mV */ + .precharge_current = 256, /* mA */ + .start_charging_min_c = 0, + .start_charging_max_c = 45, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = 0, + .discharging_max_c = 75, + }, + }, +}; +BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); + +const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC011; diff --git a/board/trondo/board.c b/board/trondo/board.c new file mode 100644 index 0000000000..66056e99d5 --- /dev/null +++ b/board/trondo/board.c @@ -0,0 +1,225 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Volteer board-specific configuration */ + +#include "button.h" +#include "common.h" +#include "accelgyro.h" +#include "driver/accel_bma2x2.h" +#include "driver/accelgyro_bmi260.h" +#include "driver/als_tcs3400.h" +#include "driver/retimer/bb_retimer.h" +#include "driver/sync.h" +#include "extpower.h" +#include "fan.h" +#include "fan_chip.h" +#include "gpio.h" +#include "hooks.h" +#include "lid_switch.h" +#include "power.h" +#include "power_button.h" +#include "pwm.h" +#include "pwm_chip.h" +#include "switch.h" +#include "system.h" +#include "task.h" +#include "tablet_mode.h" +#include "throttle_ap.h" +#include "uart.h" +#include "usb_pd_tbt.h" +#include "util.h" + +#include "gpio_list.h" /* Must come after other header files. */ + +#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) + +/* + * Reconfigure Volteer GPIOs based on the board ID + */ +__override void config_volteer_gpios(void) +{ + /* Legacy support for the first board build */ + if (get_board_id() == 0) { + CPRINTS("Configuring GPIOs for board ID 0"); + + /* Reassign USB_C1_RT_RST_ODL */ + bb_controls[USBC_PORT_C1].retimer_rst_gpio = + GPIO_USB_C1_RT_RST_ODL_BOARDID_0; + ps8xxx_rst_odl = GPIO_USB_C1_RT_RST_ODL_BOARDID_0; + + /* Reassign EC_VOLUP_BTN_ODL */ + button_reassign_gpio(BUTTON_VOLUME_UP, + GPIO_EC_VOLUP_BTN_ODL_BOARDID_0); + } +} + +static void board_init(void) +{ + /* Illuminate motherboard and daughter board LEDs equally to start. */ + pwm_enable(PWM_CH_LED4_SIDESEL, 1); + pwm_set_duty(PWM_CH_LED4_SIDESEL, 50); +} +DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); + +__override enum tbt_compat_cable_speed board_get_max_tbt_speed(int port) +{ + /* Routing length exceeds 205mm prior to connection to re-timer */ + if (port == USBC_PORT_C1) + return TBT_SS_U32_GEN1_GEN2; + + /* + * Thunderbolt-compatible mode not supported + * + * TODO (b/147726366): All the USB-C ports need to support same speed. + * Need to fix once USB-C feature set is known for Volteer. + */ + return TBT_SS_RES_0; +} + +__override bool board_is_tbt_usb4_port(int port) +{ + /* + * On Proto-1 only Port 1 supports TBT & USB4 + * + * TODO (b/147732807): All the USB-C ports need to support same + * features. Need to fix once USB-C feature set is known for Volteer. + */ + return port == USBC_PORT_C1; +} + +/******************************************************************************/ +/* Physical fans. These are logically separate from pwm_channels. */ + +const struct fan_conf fan_conf_0 = { + .flags = FAN_USE_RPM_MODE, + .ch = MFT_CH_0, /* Use MFT id to control fan */ + .pgood_gpio = -1, + .enable_gpio = GPIO_EN_PP5000_FAN, +}; + +/* + * Fan specs from datasheet: + * Max speed 5900 rpm (+/- 7%), minimum duty cycle 30%. + * Minimum speed not specified by RPM. Set minimum RPM to max speed (with + * margin) x 30%. + * 5900 x 1.07 x 0.30 = 1894, round up to 1900 + */ +const struct fan_rpm fan_rpm_0 = { + .rpm_min = 1900, + .rpm_start = 1900, + .rpm_max = 5900, +}; + +const struct fan_t fans[FAN_CH_COUNT] = { + [FAN_CH_0] = { + .conf = &fan_conf_0, + .rpm = &fan_rpm_0, + }, +}; + +/******************************************************************************/ +/* MFT channels. These are logically separate from pwm_channels. */ +const struct mft_t mft_channels[] = { + [MFT_CH_0] = { + .module = NPCX_MFT_MODULE_1, + .clk_src = TCKC_LFCLK, + .pwm_id = PWM_CH_FAN, + }, +}; +BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); + +/******************************************************************************/ +/* I2C port map configuration */ +const struct i2c_port_t i2c_ports[] = { + { + .name = "sensor", + .port = I2C_PORT_SENSOR, + .kbps = 400, + .scl = GPIO_EC_I2C0_SENSOR_SCL, + .sda = GPIO_EC_I2C0_SENSOR_SDA, + }, + { + .name = "usb_c0", + .port = I2C_PORT_USB_C0, + .kbps = 1000, + .scl = GPIO_EC_I2C1_USB_C0_SCL, + .sda = GPIO_EC_I2C1_USB_C0_SDA, + }, + { + .name = "usb_c1", + .port = I2C_PORT_USB_C1, + .kbps = 1000, + .scl = GPIO_EC_I2C2_USB_C1_SCL, + .sda = GPIO_EC_I2C2_USB_C1_SDA, + }, + { + .name = "usb_1_mix", + .port = I2C_PORT_USB_1_MIX, + .kbps = 100, + .scl = GPIO_EC_I2C3_USB_1_MIX_SCL, + .sda = GPIO_EC_I2C3_USB_1_MIX_SDA, + }, + { + .name = "power", + .port = I2C_PORT_POWER, + .kbps = 100, + .scl = GPIO_EC_I2C5_POWER_SCL, + .sda = GPIO_EC_I2C5_POWER_SDA, + }, + { + .name = "eeprom", + .port = I2C_PORT_EEPROM, + .kbps = 400, + .scl = GPIO_EC_I2C7_EEPROM_SCL, + .sda = GPIO_EC_I2C7_EEPROM_SDA, + }, +}; +const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); + +/******************************************************************************/ +/* PWM configuration */ +const struct pwm_t pwm_channels[] = { + [PWM_CH_LED1_BLUE] = { + .channel = 2, + .flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, + .freq = 2400, + }, + [PWM_CH_LED2_GREEN] = { + .channel = 0, + .flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, + .freq = 2400, + }, + [PWM_CH_LED3_RED] = { + .channel = 1, + .flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, + .freq = 2400, + }, + [PWM_CH_LED4_SIDESEL] = { + .channel = 7, + .flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, + /* Run at a higher frequency than the color PWM signals to avoid + * timing-based color shifts. + */ + .freq = 4800, + }, + [PWM_CH_FAN] = { + .channel = 5, + .flags = PWM_CONFIG_OPEN_DRAIN, + .freq = 25000 + }, + [PWM_CH_KBLIGHT] = { + .channel = 3, + .flags = 0, + /* + * Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent + * flicker. Higher frequencies consume similar average power to + * lower PWM frequencies, but higher frequencies record a much + * lower maximum power. + */ + .freq = 2400, + }, +}; +BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); diff --git a/board/trondo/board.h b/board/trondo/board.h new file mode 100644 index 0000000000..4e386d1a46 --- /dev/null +++ b/board/trondo/board.h @@ -0,0 +1,156 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Volteer board configuration */ + +#ifndef __CROS_EC_BOARD_H +#define __CROS_EC_BOARD_H + +/* Baseboard features */ +#include "baseboard.h" + +/* Optional features */ +#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands while in dev. */ + +#define CONFIG_POWER_BUTTON + +#undef CONFIG_UART_TX_BUF_SIZE +#define CONFIG_UART_TX_BUF_SIZE 4096 + +/* LED defines */ +#define CONFIG_LED_PWM +/* Although there are 2 LEDs, they are both controlled by the same lines. */ +#define CONFIG_LED_PWM_COUNT 1 + +/* Keyboard features */ + +/* Sensors */ +/* BMA253 accelerometer in base */ +#define CONFIG_ACCEL_BMA255 + +/* BMI260 accel/gyro in base */ +#define CONFIG_ACCELGYRO_BMI260 +#define CONFIG_ACCELGYRO_BMI260_INT_EVENT \ + TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) + +/* TCS3400 ALS */ +#define CONFIG_ALS +#define ALS_COUNT 1 +#define CONFIG_ALS_TCS3400 +#define CONFIG_ALS_TCS3400_INT_EVENT \ + TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS) + +/* Sensors without hardware FIFO are in forced mode */ +#define CONFIG_ACCEL_FORCE_MODE_MASK \ + (BIT(LID_ACCEL) | BIT(CLEAR_ALS)) + +/* USB Type C and USB PD defines */ +/* + * USB-C port's USB2 & USB3 mapping from schematics + * USB2 numbering on PCH - 1 to n + * USB3 numbering on AP - 0 to n (PMC's USB3 numbering for MUX + * configuration is - 1 to n hence add +1) + */ +#define USBC_PORT_0_USB2_NUM 9 +#define USBC_PORT_0_USB3_NUM 1 +#define USBC_PORT_1_USB2_NUM 4 +#define USBC_PORT_1_USB3_NUM 2 + +/* Enabling Thunderbolt-compatible mode */ +#define CONFIG_USB_PD_TBT_COMPAT_MODE + +/* Enabling USB4 mode */ +#define CONFIG_USB_PD_USB4 + +/* USB Type A Features */ + +/* BC 1.2 */ + +/* Volume Button feature */ + +/* Fan features */ + +/* + * Macros for GPIO signals used in common code that don't match the + * schematic names. Signal names in gpio.inc match the schematic and are + * then redefined here to so it's more clear which signal is being used for + * which purpose. + */ +#define GPIO_AC_PRESENT GPIO_ACOK_OD +#define GPIO_EC_INT_L GPIO_EC_PCH_INT_ODL +#define GPIO_EN_PP5000 GPIO_EN_PP5000_A +#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW +#define GPIO_LID_OPEN GPIO_EC_LID_OPEN +#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV +#define GPIO_PCH_WAKE_L GPIO_EC_PCH_WAKE_ODL +#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_ODL +#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_ODL +#define GPIO_PCH_RTCRST GPIO_EC_PCH_RTCRST +#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L +#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L +#define GPIO_PG_EC_DSW_PWROK GPIO_DSW_PWROK +#define GPIO_POWER_BUTTON_L GPIO_H1_EC_PWR_BTN_ODL +#define GPIO_RSMRST_L_PGOOD GPIO_PG_EC_RSMRST_ODL +#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL +#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL +#define GPIO_WP_L GPIO_EC_WP_L +#define GPIO_USB_C1_BC12_INT_ODL GPIO_USB_C1_MIX_INT_ODL +#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL +#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL +#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L + +/* I2C Bus Configuration */ +#define CONFIG_I2C +#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 +#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 +#define I2C_PORT_USB_C1 NPCX_I2C_PORT2_0 +#define I2C_PORT_USB_1_MIX NPCX_I2C_PORT3_0 +#define I2C_PORT_POWER NPCX_I2C_PORT5_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 + +#define I2C_PORT_BATTERY I2C_PORT_POWER +#define I2C_PORT_CHARGER I2C_PORT_EEPROM + +#define I2C_ADDR_EEPROM_FLAGS 0x50 +#define CONFIG_I2C_MASTER + + +#ifndef __ASSEMBLER__ + +#include "gpio_signal.h" +#include "registers.h" + +enum battery_type { + BATTERY_LGC011, + BATTERY_TYPE_COUNT, +}; + +enum pwm_channel { + PWM_CH_LED1_BLUE = 0, + PWM_CH_LED2_GREEN, + PWM_CH_LED3_RED, + PWM_CH_LED4_SIDESEL, + PWM_CH_FAN, + PWM_CH_KBLIGHT, + PWM_CH_COUNT +}; + +enum sensor_id { + LID_ACCEL = 0, + BASE_ACCEL, + BASE_GYRO, + CLEAR_ALS, + RGB_ALS, + VSYNC, + SENSOR_COUNT, +}; + +/* TODO: b/143375057 - Remove this code after power on. */ +void c10_gate_change(enum gpio_signal signal); + +#endif /* !__ASSEMBLER__ */ + +#endif /* __CROS_EC_BOARD_H */ diff --git a/board/trondo/build.mk b/board/trondo/build.mk new file mode 100644 index 0000000000..f16b1520c0 --- /dev/null +++ b/board/trondo/build.mk @@ -0,0 +1,34 @@ +# -*- makefile -*- +# Copyright 2020 The Chromium OS Authors. All rights reserved. +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. +# +# Board specific files build +# + +CHIP:=npcx +CHIP_FAMILY:=npcx7 +CHIP_VARIANT:=npcx7m6fc +BASEBOARD:=volteer + +# TODO: b/143375057 - Remove this code after power on. +# +# Temporary for board power on. Provide a Volteer specific make option +# to enable the power signal GPIOs that are not stuffed by default. This +# is a backup if board logic power sequencing needs to be adjusted. +# +# Set the following variable to 'y' to enable the Volteer optional power signals +VOLTEER_POWER_SEQUENCE= +ifneq (,$(VOLTEER_POWER_SEQUENCE)) +CFLAGS_BASEBOARD+=-DVOLTEER_POWER_SEQUENCE +endif + +# Force changes to VOLTEER_POWER_SEQUENCE variable to trigger a full build. +ENV_VARS := VOLTEER_POWER_SEQUENCE + + +board-y=board.o +board-y+=battery.o +board-y+=led.o +board-$(VOLTEER_POWER_SEQUENCE)+=power_sequence.o +board-y+=sensors.o diff --git a/board/trondo/ec.tasklist b/board/trondo/ec.tasklist new file mode 100644 index 0000000000..99ed79f1c8 --- /dev/null +++ b/board/trondo/ec.tasklist @@ -0,0 +1,26 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* + * See CONFIG_TASK_LIST in config.h for details. + */ + +#define CONFIG_TASK_LIST \ + TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \ + TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \ + TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 0, TASK_STACK_SIZE) \ + TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \ + TASK_NOTEST(CHIPSET, chipset_task, NULL, LARGER_TASK_STACK_SIZE) \ + TASK_NOTEST(PDCMD, pd_command_task, NULL, LARGER_TASK_STACK_SIZE) \ + TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \ + TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(POWERBTN, power_button_task, NULL, LARGER_TASK_STACK_SIZE) \ + TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \ + TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \ + TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE) diff --git a/board/trondo/gpio.inc b/board/trondo/gpio.inc new file mode 100644 index 0000000000..5caf417dd9 --- /dev/null +++ b/board/trondo/gpio.inc @@ -0,0 +1,188 @@ +/* -*- mode:c -*- + * + * Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Declare symbolic names for all the GPIOs that we care about. + * Note: Those with interrupt handlers must be declared first. */ + +/* Wake Source interrupts */ +GPIO_INT(EC_LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) +GPIO_INT(EC_WP_L, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) +GPIO_INT(H1_EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) +GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) + +/* Optional power sequencing interrupts */ +#ifdef VOLTEER_POWER_SEQUENCE +GPIO_INT(CPU_C10_GATE_L, PIN(6, 7), GPIO_INT_BOTH, c10_gate_change) +#endif + +/* Power sequencing interrupts */ +GPIO_INT(SLP_S0_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) +#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3 +GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt) +#endif +GPIO_INT(SLP_SUS_L, PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(PG_EC_RSMRST_ODL, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(DSW_PWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(PG_EC_ALL_SYS_PWRGD, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) + +/* Sensor Interrupts */ +GPIO_INT(EC_IMU_INT_L, PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi260_interrupt) +GPIO_INT(EC_CAM_VSYN_SLP_S0IX, PIN(7, 2), GPIO_INT_RISING, sync_interrupt) +GPIO_INT(EC_ALS_RGB_INT_L, PIN(D, 4), GPIO_INT_FALLING, tcs3400_interrupt) +GPIO_INT(TABLET_MODE_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr) + +/* USB-C interrupts */ +GPIO_INT(USB_C0_TCPC_INT_ODL, PIN(E, 0), GPIO_INT_BOTH, tcpc_alert_event) +GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(A, 2), GPIO_INT_BOTH, tcpc_alert_event) + +GPIO_INT(USB_C0_PPC_INT_ODL, PIN(6, 2), GPIO_INT_BOTH, ppc_interrupt) +GPIO_INT(USB_C1_PPC_INT_ODL, PIN(F, 5), GPIO_INT_BOTH, ppc_interrupt) + +GPIO_INT(USB_C0_BC12_INT_ODL, PIN(E, 4), GPIO_INT_BOTH, bc12_interrupt) +GPIO_INT(USB_C1_MIX_INT_ODL, PIN(0, 3), GPIO_INT_BOTH, bc12_interrupt) + +/* HDMI interrupts */ + +/* Volume button interrupts */ +GPIO_INT(EC_VOLDN_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) +/* + * EC_VOLUP_BTN_ODL moved from GPIO75 to GPIO97 on boards with board ID >=1. + * GPIO97/EN_PP1050_BYPASS is DNS on board ID 0, and GPIO75 will be used once + * EFS support is added. + * TODO (b/149858568): remove board ID=0 support. + */ +GPIO_INT(EC_VOLUP_BTN_ODL_BOARDID_0, PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) +GPIO_INT(EC_VOLUP_BTN_ODL, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) + +/* Power Sequencing Signals */ +GPIO(EN_PP3300_A, PIN(A, 3), GPIO_OUT_LOW) +GPIO(EN_PP5000_A, PIN(A, 4), GPIO_OUT_LOW) +GPIO(EN_PPVAR_VCCIN, PIN(4, 3), GPIO_OUT_LOW) /* Enables VCCIN IMPV9 */ +/* The EC does not buffer this signal on Volteer. */ +UNIMPLEMENTED(PCH_DSW_PWROK) + +#ifdef VOLTEER_POWER_SEQUENCE +/* Optional power sequencing signals that are not stuffed by default */ +GPIO(EN_DRAM_VDDQ, PIN(F, 2), GPIO_OUT_LOW) +GPIO(EN_PP1050_STG, PIN(C, 0), GPIO_OUT_LOW) +GPIO(EN_PP5000_USB_AG, PIN(A, 7), GPIO_OUT_LOW) +GPIO(EN_PPVAR_VCCIN_AUX, PIN(8, 1), GPIO_OUT_LOW) +GPIO(EN_PP1050_ST_S0, PIN(3, 4), GPIO_OUT_LOW) +GPIO(EN_VNN_BYPASS, PIN(B, 0), GPIO_OUT_LOW) +GPIO(EN_DRAM_VDD1, PIN(9, 6), GPIO_OUT_LOW) +#endif + +/* Other wake sources */ +/* + * GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an + * interrupt handler because it is automatically handled by the PSL. + * + * We need to lock the setting so this gpio can't be reconfigured to overdrive + * the real reset signal. (This is the PSL input pin not the real reset pin). + */ +GPIO(EC_RST_ODL, PIN(0, 2), GPIO_INT_BOTH | + GPIO_HIB_WAKE_HIGH | + GPIO_LOCKED) + +/* AP/PCH Signals */ +GPIO(EC_PCH_SYS_PWROK, PIN(3, 7), GPIO_OUT_LOW) +GPIO(EC_PCH_RSMRST_ODL, PIN(A, 6), GPIO_ODR_LOW) /* TODO - b/140950085 - implement TGL sequencing requirement */ +GPIO(EC_PCH_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH) +GPIO(EC_PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW) +GPIO(EC_PCH_WAKE_ODL, PIN(7, 4), GPIO_ODR_HIGH) +GPIO(EC_ENTERING_RW, PIN(E, 3), GPIO_OUT_LOW) +GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH) +GPIO_INT(EC_PROCHOT_IN_L, PIN(F, 0), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt) +GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH) + +GPIO(EC_PCH_INT_ODL, PIN(B, 0), GPIO_ODR_HIGH) + +/* USB and USBC Signals */ + +/* + * USB_C1 moved from GPIO32 to GPIO83 on boards with board ID >=1. + * GPIO83/EN_PP1800_A is DNS on board ID 0 and GPIO32 is N/C on board ID >=1 + * so it's safe to define GPIOs compatible with both designs. + * TODO (b/149858568): remove board ID=0 support. + */ +GPIO(USB_C1_RT_RST_ODL_BOARDID_0, PIN(3, 2), GPIO_ODR_LOW) /* USB_C1 Reset on boards without board ID */ +GPIO(USB_C1_RT_RST_ODL, PIN(8, 3), GPIO_ODR_LOW) /* USB_C1 Reset on boards board ID >=1 */ + +/* Don't have a load switch for retimer */ +UNIMPLEMENTED(USB_C1_LS_EN) +/* Retimer Force Power enable is connected to AP */ +UNIMPLEMENTED(USB_C1_RT_FORCE_PWR) + +/* Misc Signals */ + +/* + * eDP backlight - both PCH and EC have enable pins that must be high + * for the backlight to turn on. Default state is high, and can be turned + * off during sleep states. + */ +GPIO(EC_EDP_BL_EN, PIN(D, 3), GPIO_OUT_HIGH) + +/* I2C pins - Alternate function below configures I2C module on these pins */ +GPIO(EC_I2C0_SENSOR_SCL, PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V) +GPIO(EC_I2C0_SENSOR_SDA, PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V) +GPIO(EC_I2C1_USB_C0_SCL, PIN(9, 0), GPIO_INPUT) +GPIO(EC_I2C1_USB_C0_SDA, PIN(8, 7), GPIO_INPUT) +GPIO(EC_I2C2_USB_C1_SCL, PIN(9, 2), GPIO_INPUT) +GPIO(EC_I2C2_USB_C1_SDA, PIN(9, 1), GPIO_INPUT) +GPIO(EC_I2C3_USB_1_MIX_SCL, PIN(D, 1), GPIO_INPUT) +GPIO(EC_I2C3_USB_1_MIX_SDA, PIN(D, 0), GPIO_INPUT) +GPIO(EC_I2C5_POWER_SCL, PIN(3, 3), GPIO_INPUT) +GPIO(EC_I2C5_POWER_SDA, PIN(3, 6), GPIO_INPUT) +GPIO(EC_I2C7_EEPROM_SCL, PIN(B, 3), GPIO_INPUT) +GPIO(EC_I2C7_EEPROM_SDA, PIN(B, 2), GPIO_INPUT) + +/* Battery signals */ +GPIO(EC_BATT_PRES_ODL, PIN(E, 1), GPIO_INPUT) + +/* Physical HPD pins are not needed on EC as these are configured by PMC */ +GPIO(USB_C0_DP_HPD, PIN(F, 3), GPIO_INPUT) +GPIO(USB_C1_DP_HPD, PIN(7, 0), GPIO_INPUT) + +/* Alternate functions GPIO definitions */ +ALTERNATE(PIN_MASK(B, BIT(5) | BIT(4)), 0, MODULE_I2C, (GPIO_INPUT | GPIO_SEL_1P8V)) /* I2C0 */ +ALTERNATE(PIN_MASK(9, BIT(0) | BIT(2) | BIT(1)), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */ +ALTERNATE(PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0) /* I2C1 SDA */ +ALTERNATE(PIN_MASK(D, BIT(1) | BIT(0)), 0, MODULE_I2C, 0) /* I2C3 */ +ALTERNATE(PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0) /* I2C5 */ +ALTERNATE(PIN_MASK(B, BIT(3) | BIT(2)), 0, MODULE_I2C, 0) /* I2C7 */ + +/* This selects between an LED module on the motherboard and one on the daughter + * board, to be controlled by LED_{1,2,3}_L. PWM allows driving both modules at + * the same time. */ +ALTERNATE(PIN_MASK(6, BIT(0)), 0, MODULE_PWM, 0) /* LED_SIDESEL_4_L */ +ALTERNATE(PIN_MASK(C, BIT(2) | BIT(3) | BIT(4)), 0, MODULE_PWM, 0) /* LED_{3,2,1}_L */ + +/* Fan signals */ +GPIO(EN_PP5000_FAN, PIN(6, 1), GPIO_OUT_LOW) +ALTERNATE(PIN_MASK(B, BIT(7)), 0, MODULE_PWM, 0) /* FAN_PWM */ +ALTERNATE(PIN_MASK(4, BIT(0)), 0, MODULE_PWM, 0) /* FAN_SPEED_TACH */ + +/* Keyboard pins */ +#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP) +ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_00-01 */ +ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_02-07 */ +ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */ +GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 */ +ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */ +ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-13 */ +ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_14 */ +ALTERNATE(PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0) /* EC_KB_BL_PWM */ + +/* UART */ +ALTERNATE(PIN_MASK(6, BIT(5) | BIT(4)), 0, MODULE_UART, 0) /* UART from EC to Servo */ + +/* Power Switch Logic (PSL) inputs */ +ALTERNATE(PIN_MASK(D, BIT(2)), 0, MODULE_PMU, 0) /* GPIOD2 = EC_LID_OPEN */ +ALTERNATE(PIN_MASK(0, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_PMU, 0) /* GPIO00 = ACOK_OD, + GPIO01 = H1_EC_PWR_BTN_ODL + GPIO02 = EC_RST_ODL */ + diff --git a/board/trondo/led.c b/board/trondo/led.c new file mode 100644 index 0000000000..735df935d2 --- /dev/null +++ b/board/trondo/led.c @@ -0,0 +1,103 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + * + * Power and battery LED control for Volteer + */ + +#include "charge_manager.h" +#include "common.h" +#include "ec_commands.h" +#include "hooks.h" +#include "led_common.h" +#include "led_pwm.h" +#include "pwm.h" + +const enum ec_led_id supported_led_ids[] = { + EC_LED_ID_POWER_LED, +}; +const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); + +struct pwm_led led_color_map[] = { + /* Red, Green, Blue */ + [EC_LED_COLOR_RED] = { 100, 0, 0 }, + [EC_LED_COLOR_GREEN] = { 0, 100, 0 }, + [EC_LED_COLOR_BLUE] = { 0, 0, 100 }, + /* The green LED seems to be brighter than the others, so turn down + * green from its natural level for these secondary colors. + */ + [EC_LED_COLOR_YELLOW] = { 100, 70, 0 }, + [EC_LED_COLOR_WHITE] = { 100, 70, 100 }, + [EC_LED_COLOR_AMBER] = { 100, 20, 0 }, +}; + +struct pwm_led pwm_leds[] = { + /* 2 RGB diffusers controlled by 1 set of 3 channels. */ + [PWM_LED0] = { + .ch0 = PWM_CH_LED3_RED, + .ch1 = PWM_CH_LED2_GREEN, + .ch2 = PWM_CH_LED1_BLUE, + .enable = &pwm_enable, + .set_duty = &pwm_set_duty, + }, +}; + +void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) +{ + brightness_range[EC_LED_COLOR_RED] = 255; + brightness_range[EC_LED_COLOR_GREEN] = 255; + brightness_range[EC_LED_COLOR_BLUE] = 255; +} + +int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) +{ + enum pwm_led_id pwm_id; + + /* Convert ec_led_id to pwm_led_id. */ + if (led_id == EC_LED_ID_POWER_LED) + pwm_id = PWM_LED0; + else + return EC_ERROR_UNKNOWN; + + if (brightness[EC_LED_COLOR_RED]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_RED); + else if (brightness[EC_LED_COLOR_GREEN]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_GREEN); + else if (brightness[EC_LED_COLOR_BLUE]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_BLUE); + else if (brightness[EC_LED_COLOR_YELLOW]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_YELLOW); + else if (brightness[EC_LED_COLOR_WHITE]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_WHITE); + else if (brightness[EC_LED_COLOR_AMBER]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_AMBER); + else + /* Otherwise, the "color" is "off". */ + set_pwm_led_color(pwm_id, -1); + + return EC_SUCCESS; +} + +/* Illuminates the LED on the side of the active charging port. If not charging, + * illuminates both LEDs. + */ +static void led_set_charge_port_tick(void) +{ + int port; + int side_select_duty; + + port = charge_manager_get_active_charge_port(); + switch (port) { + case 0: + side_select_duty = 100; + break; + case 1: + side_select_duty = 0; + break; + default: + side_select_duty = 50; + } + + pwm_set_duty(PWM_CH_LED4_SIDESEL, side_select_duty); +} +DECLARE_HOOK(HOOK_TICK, led_set_charge_port_tick, HOOK_PRIO_DEFAULT); diff --git a/board/trondo/power_sequence.c b/board/trondo/power_sequence.c new file mode 100644 index 0000000000..ac244c179d --- /dev/null +++ b/board/trondo/power_sequence.c @@ -0,0 +1,183 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* + * Volteer board-specific power sequencing + * Power sequencing is largely done by the platform automatically. + * However, if platform power sequencing is buggy or needs tuning, + * resistors can be stuffed on the board to allow the EC full control over + * the power sequencing. + */ + +#include "assert.h" +#include "chipset.h" +#include "console.h" +#include "gpio.h" +#include "hooks.h" +#include "system.h" + +#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) +#define GPIO_SET_VERBOSE(signal, value) \ + gpio_set_level_verbose(CC_CHIPSET, signal, value) + +static void board_wakeup(void) +{ + CPRINTS("%s", __func__); + /* + * PP5000_USB_AG - normally enabled automatically by EN_3300_AG which + * is connected to the PSL_OUT of the Nuvoton. + * + * Assert the signal high during wakeup, deassert at hibernate + */ + GPIO_SET_VERBOSE(GPIO_EN_PP5000_USB_AG, 1); +} +DECLARE_HOOK(HOOK_INIT, board_wakeup, HOOK_PRIO_DEFAULT); + +__override void board_hibernate_late(void) +{ + CPRINTS("%s", __func__); + /* Disable PP5000_USB_AG on hibernate */ + GPIO_SET_VERBOSE(GPIO_EN_PP5000_USB_AG, 0); +} + +/* Called during S5 -> S3 transition */ +static void board_chipset_startup(void) +{ + CPRINTS("%s", __func__); + + /* + * + */ + + /* + * Power on 1.8V rail, + * tPCH06, minimum 200us from P-P3300_DSW stable to before + * VCCPRIM_1P8 starting up. + * + * The transition to S5 and S3 is gated by SLP_SUS#, which Tiger Lake + * internally delays a minimum of 95 ms from DSW_PWROK. So no delay + * needed here. + */ + GPIO_SET_VERBOSE(GPIO_EN_PP1800_A, 1); + + /* + * Power on VCCIN Aux - no delay specified, but must follow VCCPRIM_1P8 + */ + GPIO_SET_VERBOSE(GPIO_EN_PPVAR_VCCIN_AUX, 1); + + /* + * Power on bypass rails - must be turned on after VCCIN aux + * + * tPCH34, maximum 50 ms from SLP_SUS# de-assertion to completion of + * primary and bypass rail, no minimum specified. + */ + GPIO_SET_VERBOSE(GPIO_EN_VNN_BYPASS, 1); + GPIO_SET_VERBOSE(GPIO_EN_PP1050_BYPASS, 1); + + /* + * Power on VCCST - must be gated by SLP_S3#. No order with respect to + * other power signals specified. + */ + GPIO_SET_VERBOSE(GPIO_EN_PP1050_ST_S0, 1); + + /* + * Power on DDR rails + * No delay needed - SLP_S4# already guaranteed to be de-asserted. + * VDDQ must ramp after VPP (VDD1) for DDR4/LPDDR4 systems. + */ + GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDD1, 1); + GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDDQ, 1); +} +DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT); + +/* Called during S3 -> S0 and S0ix -> S0 transition */ +static void board_chipset_resume(void) +{ + CPRINTS("%s", __func__); + /* + * Power on VCCSTG rail to Tiger Lake, no PG signal available + */ + GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 1); +} +DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT); + + +/* Called during S0 -> S0ix transition */ +static void board_chipset_suspend(void) +{ + CPRINTS("%s", __func__); + /* Power down VCCSTG rail */ + GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 0); +} +DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); + +/* Called during S3 -> S5 transition */ +static void board_chipset_shutdown(void) +{ + CPRINTS("%s", __func__); + + /* + * S0 to G3 sequence 1 of 2 (shared between Deep Sx and non-Deep Sx) + * TigerLake Rail Net Name + * VCCSTG PP1050_STG_S0 + * DDR_VDDQ PP0600_VDDQ + * VCCST PP1050_ST_S0 + * DDR_VPP PP1800_DRAM + */ + GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 0); + GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDDQ, 0); + GPIO_SET_VERBOSE(GPIO_EN_PP1050_ST_S0, 0); + GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDD1, 0); + + /* + * S0 to G3 sequence 2 of 2 (non-Deep Sx) + * TigerLake Name Net Name + * VCCPRIM_3P3 PP3300_A + * VCCDSW_3P3 VCCDSW_3P3 (PP3300_A) + * V5.0A PP5000_A + * VCCPRIM_1P8 PP1800_A + * VCCIN_AUX PPVAR_VCCIN_AUX + * VNN_BYPASS PPVAR_VNN_BYPASS + * V1.05A_BYPASS PP1050_A_BYPASS + */ + + /* Ice Lake shutdown already sequences first 3 rails above. */ + chipset_force_shutdown(CHIPSET_SHUTDOWN_G3); + + GPIO_SET_VERBOSE(GPIO_EN_PP1800_A, 0); + GPIO_SET_VERBOSE(GPIO_EN_PPVAR_VCCIN_AUX, 0); + GPIO_SET_VERBOSE(GPIO_EN_VNN_BYPASS, 0); + GPIO_SET_VERBOSE(GPIO_EN_PP1050_BYPASS, 0); +} +DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT); + +/** + * Handle C10_GATE transitions - see VCCSTG enable logic (figure 232, page 406) + * in Tiger Lake PDG, revision 1.0. + * + * TODO: b/141322107 - This function can be promoted to common TigerLake power + * file if CPU_C10_GATE_L support provided by the platform is not sufficient. + */ +void c10_gate_change(enum gpio_signal signal) +{ + /* Pass through CPU_C10_GATE_L as enable for VCCSTG rail */ + int c10_gate_in; + int vccstg_out; + + ASSERT(signal == GPIO_CPU_C10_GATE_L); + + c10_gate_in = gpio_get_level(signal); + vccstg_out = gpio_get_level(GPIO_EN_PP1050_STG); + + if (vccstg_out == c10_gate_in) + return; + + gpio_set_level(GPIO_EN_PP1050_STG, c10_gate_in); +} + + + + + diff --git a/board/trondo/sensors.c b/board/trondo/sensors.c new file mode 100644 index 0000000000..f59c199e07 --- /dev/null +++ b/board/trondo/sensors.c @@ -0,0 +1,243 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Volteer family-specific sensor configuration */ +#include "common.h" +#include "accelgyro.h" +#include "driver/accel_bma2x2.h" +#include "driver/accelgyro_bmi_common.h" +#include "driver/accelgyro_bmi260.h" +#include "driver/als_tcs3400.h" +#include "driver/sync.h" +#include "keyboard_scan.h" +#include "hooks.h" +#include "i2c.h" +#include "task.h" +#include "util.h" + +/******************************************************************************/ +/* Sensors */ +static struct mutex g_lid_accel_mutex; +static struct mutex g_base_mutex; + +/* BMA253 private data */ +static struct accelgyro_saved_data_t g_bma253_data; + +/* BMI260 private data */ +static struct bmi_drv_data_t g_bmi260_data; + +/* TCS3400 private data */ +static struct als_drv_data_t g_tcs3400_data = { + .als_cal.scale = 1, + .als_cal.uscale = 0, + .als_cal.offset = 0, + .als_cal.channel_scale = { + .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc from VPD */ + .cover_scale = ALS_CHANNEL_SCALE(1.0), /* CT */ + }, +}; + +/* + * TODO: b/146166425 need to calibrate ALS/RGB sensor. At default settings, + * shining phone flashlight on sensor pegs all readings at 0xFFFF. + */ +static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = { + .calibration.rgb_cal[X] = { + .offset = 0, + .coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0), + .scale = { + .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */ + .cover_scale = ALS_CHANNEL_SCALE(1.0) + } + }, + .calibration.rgb_cal[Y] = { + .offset = 0, + .coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0), + .scale = { + .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */ + .cover_scale = ALS_CHANNEL_SCALE(1.0) + }, + }, + .calibration.rgb_cal[Z] = { + .offset = 0, + .coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0), + .coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0), + .scale = { + .k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */ + .cover_scale = ALS_CHANNEL_SCALE(1.0) + } + }, + .calibration.irt = INT_TO_FP(1), + .saturation.again = TCS_DEFAULT_AGAIN, + .saturation.atime = TCS_DEFAULT_ATIME, +}; + +/* Rotation matrix for the lid accelerometer */ +/* TODO: b/146144170 - the accelerometer is on the motherboard for proto1 + * for testing. Once the sensor moves to the lid, the rotation matrix needs + * to be updated for correct behavior. + */ +static const mat33_fp_t lid_standard_ref = { + { 0, FLOAT_TO_FP(-1), 0}, + { FLOAT_TO_FP(-1), 0, 0}, + { 0, 0, FLOAT_TO_FP(-1)} +}; + +const mat33_fp_t base_standard_ref = { + { 0, FLOAT_TO_FP(1), 0}, + { FLOAT_TO_FP(-1), 0, 0}, + { 0, 0, FLOAT_TO_FP(1)} +}; + +struct motion_sensor_t motion_sensors[] = { + [LID_ACCEL] = { + .name = "Lid Accel", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_BMA255, + .type = MOTIONSENSE_TYPE_ACCEL, + .location = MOTIONSENSE_LOC_LID, + .drv = &bma2x2_accel_drv, + .mutex = &g_lid_accel_mutex, + .drv_data = &g_bma253_data, + .port = I2C_PORT_SENSOR, + .i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS, + .rot_standard_ref = &lid_standard_ref, + .min_frequency = BMA255_ACCEL_MIN_FREQ, + .max_frequency = BMA255_ACCEL_MAX_FREQ, + .default_range = 2, /* g, to support tablet mode */ + .config = { + /* EC use accel for angle detection */ + [SENSOR_CONFIG_EC_S0] = { + .odr = 10000 | ROUND_UP_FLAG, + }, + /* Sensor on in S3 */ + [SENSOR_CONFIG_EC_S3] = { + .odr = 10000 | ROUND_UP_FLAG, + }, + }, + }, + [BASE_ACCEL] = { + .name = "Base Accel", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_BMI260, + .type = MOTIONSENSE_TYPE_ACCEL, + .location = MOTIONSENSE_LOC_BASE, + .drv = &bmi260_drv, + .mutex = &g_base_mutex, + .drv_data = &g_bmi260_data, + .port = I2C_PORT_SENSOR, + .i2c_spi_addr_flags = BMI260_ADDR0_FLAGS, + .rot_standard_ref = &base_standard_ref, + .min_frequency = BMI_ACCEL_MIN_FREQ, + .max_frequency = BMI_ACCEL_MAX_FREQ, + .default_range = 4, /* g */ + .config = { + /* EC use accel for angle detection */ + [SENSOR_CONFIG_EC_S0] = { + .odr = 10000 | ROUND_UP_FLAG, + .ec_rate = 100 * MSEC, + }, + /* Sensor on in S3 */ + [SENSOR_CONFIG_EC_S3] = { + .odr = 10000 | ROUND_UP_FLAG, + .ec_rate = 100 * MSEC, + }, + }, + }, + + [BASE_GYRO] = { + .name = "Base Gyro", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_BMI260, + .type = MOTIONSENSE_TYPE_GYRO, + .location = MOTIONSENSE_LOC_BASE, + .drv = &bmi260_drv, + .mutex = &g_base_mutex, + .drv_data = &g_bmi260_data, + .port = I2C_PORT_SENSOR, + .i2c_spi_addr_flags = BMI260_ADDR0_FLAGS, + .default_range = 1000, /* dps */ + .rot_standard_ref = &base_standard_ref, + .min_frequency = BMI_GYRO_MIN_FREQ, + .max_frequency = BMI_GYRO_MAX_FREQ, + }, + [CLEAR_ALS] = { + .name = "Clear Light", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_TCS3400, + .type = MOTIONSENSE_TYPE_LIGHT, + .location = MOTIONSENSE_LOC_BASE, + .drv = &tcs3400_drv, + .drv_data = &g_tcs3400_data, + .port = I2C_PORT_SENSOR, + .i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS, + .rot_standard_ref = NULL, + .default_range = 0x10000, /* scale = 1x, uscale = 0 */ + .min_frequency = TCS3400_LIGHT_MIN_FREQ, + .max_frequency = TCS3400_LIGHT_MAX_FREQ, + .config = { + /* Run ALS sensor in S0 */ + [SENSOR_CONFIG_EC_S0] = { + .odr = 1000, + }, + }, + }, + + [RGB_ALS] = { + /* + * RGB channels read by CLEAR_ALS and so the i2c port and + * address do not need to be defined for RGB_ALS. + */ + .name = "RGB Light", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_TCS3400, + .type = MOTIONSENSE_TYPE_LIGHT_RGB, + .location = MOTIONSENSE_LOC_BASE, + .drv = &tcs3400_rgb_drv, + .drv_data = &g_tcs3400_rgb_data, + .rot_standard_ref = NULL, + .default_range = 0x10000, /* scale = 1x, uscale = 0 */ + }, + + [VSYNC] = { + .name = "Camera VSYNC", + .active_mask = SENSOR_ACTIVE_S0, + .chip = MOTIONSENSE_CHIP_GPIO, + .type = MOTIONSENSE_TYPE_SYNC, + .location = MOTIONSENSE_LOC_CAMERA, + .drv = &sync_drv, + .default_range = 0, + .min_frequency = 0, + .max_frequency = 1, + }, +}; +unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); + +/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */ +const struct motion_sensor_t *motion_als_sensors[] = { + &motion_sensors[CLEAR_ALS], +}; +BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT); + +static void baseboard_sensors_init(void) +{ + /* Note - BMA253 interrupt unused by EC */ + + /* Enable gpio interrupt for camera vsync */ + gpio_enable_interrupt(GPIO_EC_CAM_VSYN_SLP_S0IX); + /* Enable interrupt for the TCS3400 color light sensor */ + gpio_enable_interrupt(GPIO_EC_ALS_RGB_INT_L); + /* Enable interrupt for the BMI260 accel/gyro sensor */ + gpio_enable_interrupt(GPIO_EC_IMU_INT_L); +} +DECLARE_HOOK(HOOK_INIT, baseboard_sensors_init, HOOK_PRIO_DEFAULT); -- cgit v1.2.1