From 9d1d0f79f507c37d5fa039e12c9017453c90b531 Mon Sep 17 00:00:00 2001 From: Wisley Chen Date: Wed, 17 Jun 2020 08:51:00 +0800 Subject: drawcia: Initial EC image Create the initial EC image for the drawcia variant by copying the waddledee reference board EC files into a new directory named for the variant. (Auto-Generated by create_initial_ec_image.sh version 1.0.3). BUG=b:158540280 BRANCH=none TEST=make BOARD=drawcia Signed-off-by: Wisley Chen Change-Id: I0f3f70faa1c5a3cbecd2bfea9fec1aba9d95a955 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2237493 Reviewed-by: Marco Chen Commit-Queue: Marco Chen Tested-by: Marco Chen --- board/drawcia/battery.c | 327 +++++++++++++++++++++++++ board/drawcia/board.c | 537 ++++++++++++++++++++++++++++++++++++++++++ board/drawcia/board.h | 131 +++++++++++ board/drawcia/build.mk | 15 ++ board/drawcia/ec.tasklist | 24 ++ board/drawcia/gpio.inc | 141 +++++++++++ board/drawcia/led.c | 82 +++++++ board/drawcia/usb_pd_policy.c | 80 +++++++ 8 files changed, 1337 insertions(+) create mode 100644 board/drawcia/battery.c create mode 100644 board/drawcia/board.c create mode 100644 board/drawcia/board.h create mode 100644 board/drawcia/build.mk create mode 100644 board/drawcia/ec.tasklist create mode 100644 board/drawcia/gpio.inc create mode 100644 board/drawcia/led.c create mode 100644 board/drawcia/usb_pd_policy.c (limited to 'board/drawcia') diff --git a/board/drawcia/battery.c b/board/drawcia/battery.c new file mode 100644 index 0000000000..3efc01bf83 --- /dev/null +++ b/board/drawcia/battery.c @@ -0,0 +1,327 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + * + * Battery pack vendor provided charging profile + */ + +#include "battery_fuel_gauge.h" +#include "charge_state.h" +#include "common.h" + +/* + * Battery info for all waddledee battery types. Note that the fields + * start_charging_min/max and charging_min/max are not used for the charger. + * The effective temperature limits are given by discharging_min/max_c. + * + * Fuel Gauge (FG) parameters which are used for determining if the battery + * is connected, the appropriate ship mode (battery cutoff) command, and the + * charge/discharge FETs status. + * + * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery + * register. For some batteries, the charge/discharge FET bits are set when + * charging/discharging is active, in other types, these bits set mean that + * charging/discharging is disabled. Therefore, in addition to the mask for + * these bits, a disconnect value must be specified. Note that for TI fuel + * gauge, the charge/discharge FET status is found in Operation Status (0x54), + * but a read of Manufacturer Access (0x00) will return the lower 16 bits of + * Operation status which contains the FET status bits. + * + * The assumption for battery types supported is that the charge/discharge FET + * status can be read with a sb_read() command and therefore, only the register + * address, mask, and disconnect value need to be provided. + */ +const struct board_batt_params board_battery_info[] = { + /* LGC AC15A8J Battery Information */ + [BATTERY_LGC15] = { + .fuel_gauge = { + .manuf_name = "LGC", + .device_name = "AC15A8J", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .mfgacc_support = 1, + .reg_addr = 0x0, + .reg_mask = 0x0002, + .disconnect_val = 0x0, + } + }, + .batt_info = { + .voltage_max = 13200, + .voltage_normal = 11520, /* mV */ + .voltage_min = 9000, /* mV */ + .precharge_current = 256, /* mA */ + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = 0, + .discharging_max_c = 60, + }, + }, + + /* Panasonic AP1505L Battery Information */ + [BATTERY_PANASONIC_AP15O5L] = { + .fuel_gauge = { + .manuf_name = "PANASONIC", + .device_name = "AP15O5L", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x0, + .reg_mask = 0x4000, + .disconnect_val = 0x0, + } + }, + .batt_info = { + .voltage_max = 13200, + .voltage_normal = 11550, /* mV */ + .voltage_min = 9000, /* mV */ + .precharge_current = 256, /* mA */ + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = 0, + .discharging_max_c = 60, + }, + }, + + /* SANYO AC15A3J Battery Information */ + [BATTERY_SANYO] = { + .fuel_gauge = { + .manuf_name = "SANYO", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x0, + .reg_mask = 0x4000, + .disconnect_val = 0x0, + } + }, + .batt_info = { + .voltage_max = TARGET_WITH_MARGIN(13200, 5), + .voltage_normal = 11550, /* mV */ + .voltage_min = 9000, /* mV */ + .precharge_current = 256, /* mA */ + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = 0, + .discharging_max_c = 60, + }, + }, + + /* Sony Ap13J4K Battery Information */ + [BATTERY_SONY] = { + .fuel_gauge = { + .manuf_name = "SONYCorp", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x0, + .reg_mask = 0x8000, + .disconnect_val = 0x8000, + } + }, + .batt_info = { + .voltage_max = TARGET_WITH_MARGIN(13200, 5), + .voltage_normal = 11400, /* mV */ + .voltage_min = 9000, /* mV */ + .precharge_current = 256, /* mA */ + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = 0, + .discharging_max_c = 60, + }, + }, + + /* Simplo AP13J7K Battery Information */ + [BATTERY_SMP_AP13J7K] = { + .fuel_gauge = { + .manuf_name = "SIMPLO", + .device_name = "AP13J7K", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .mfgacc_support = 1, + .reg_addr = 0x0, + .reg_mask = 0x0002, + .disconnect_val = 0x0000, + } + }, + .batt_info = { + .voltage_max = 13050, + .voltage_normal = 11400, /* mV */ + .voltage_min = 9000, /* mV */ + .precharge_current = 256, /* mA */ + .start_charging_min_c = 0, + .start_charging_max_c = 45, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = 0, + .discharging_max_c = 60, + }, + }, + + /* Panasonic AC15A3J Battery Information */ + [BATTERY_PANASONIC_AC15A3J] = { + .fuel_gauge = { + .manuf_name = "PANASONIC", + .device_name = "AC15A3J", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x0, + .reg_mask = 0x4000, + .disconnect_val = 0x0, + } + }, + .batt_info = { + .voltage_max = 13200, + .voltage_normal = 11550, /* mV */ + .voltage_min = 9000, /* mV */ + .precharge_current = 256, /* mA */ + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = -20, + .discharging_max_c = 75, + }, + }, + + /* LGC AP18C8K Battery Information */ + [BATTERY_LGC_AP18C8K] = { + .fuel_gauge = { + .manuf_name = "LGC KT0030G020", + .device_name = "AP18C8K", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x43, + .reg_mask = 0x0001, + .disconnect_val = 0x0, + }, + }, + .batt_info = { + .voltage_max = 13050, + .voltage_normal = 11250, + .voltage_min = 9000, + .precharge_current = 256, + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = -20, + .discharging_max_c = 75, + }, + }, + + /* Murata AP18C4K Battery Information */ + [BATTERY_MURATA_AP18C4K] = { + .fuel_gauge = { + .manuf_name = "Murata KT00304012", + .device_name = "AP18C4K", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x0, + .reg_mask = 0x2000, + .disconnect_val = 0x2000, + }, + }, + .batt_info = { + .voltage_max = 13200, + .voltage_normal = 11400, + .voltage_min = 9000, + .precharge_current = 256, + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = -20, + .discharging_max_c = 75, + }, + }, + + /* LGC AP19A8K Battery Information */ + [BATTERY_LGC_AP19A8K] = { + .fuel_gauge = { + .manuf_name = "LGC KTxxxxGxxx", + .device_name = "AP19A8K", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x43, + .reg_mask = 0x0001, + .disconnect_val = 0x0, + }, + }, + .batt_info = { + .voltage_max = 13200, + .voltage_normal = 11550, + .voltage_min = 9000, + .precharge_current = 256, + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = -20, + .discharging_max_c = 75, + }, + }, + + /* LGC KT0030G023 Battery Information */ + [BATTERY_LGC_G023] = { + .fuel_gauge = { + .manuf_name = "LGC KT0030G023", + .device_name = "AP19A8K", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x43, + .reg_mask = 0x0001, + .disconnect_val = 0x0, + }, + }, + .batt_info = { + .voltage_max = 13200, + .voltage_normal = 11550, + .voltage_min = 9000, + .precharge_current = 256, + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = -20, + .discharging_max_c = 75, + }, + }, +}; +BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); + +const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_PANASONIC_AC15A3J; diff --git a/board/drawcia/board.c b/board/drawcia/board.c new file mode 100644 index 0000000000..5730749735 --- /dev/null +++ b/board/drawcia/board.c @@ -0,0 +1,537 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Waddledee board-specific configuration */ + +#include "button.h" +#include "charge_manager.h" +#include "charge_state_v2.h" +#include "charger.h" +#include "driver/accel_lis2dh.h" +#include "driver/accelgyro_lsm6dsm.h" +#include "driver/bc12/pi3usb9201.h" +#include "driver/charger/sm5803.h" +#include "driver/sync.h" +#include "driver/retimer/tusb544.h" +#include "driver/temp_sensor/thermistor.h" +#include "driver/tcpm/anx7447.h" +#include "driver/tcpm/it83xx_pd.h" +#include "driver/usb_mux/it5205.h" +#include "gpio.h" +#include "hooks.h" +#include "intc.h" +#include "keyboard_scan.h" +#include "lid_switch.h" +#include "power.h" +#include "power_button.h" +#include "pwm.h" +#include "pwm_chip.h" +#include "switch.h" +#include "system.h" +#include "tablet_mode.h" +#include "task.h" +#include "tcpci.h" +#include "temp_sensor.h" +#include "uart.h" +#include "usb_charge.h" +#include "usb_mux.h" +#include "usb_pd.h" +#include "usb_pd_tcpm.h" + +#define CPRINTUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) + +#define INT_RECHECK_US 5000 + +/* C1 interrupt line swapped between board versions, track it in a variable */ +static enum gpio_signal c1_int_line; + +/* C0 interrupt line shared by BC 1.2 and charger */ +static void check_c0_line(void); +DECLARE_DEFERRED(check_c0_line); + +static void notify_c0_chips(void) +{ + task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12, 0); + sm5803_interrupt(0); +} + +static void check_c0_line(void) +{ + /* + * If line is still being held low, see if there's more to process from + * one of the chips + */ + if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) { + notify_c0_chips(); + hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); + } +} + +static void usb_c0_interrupt(enum gpio_signal s) +{ + /* Cancel any previous calls to check the interrupt line */ + hook_call_deferred(&check_c0_line_data, -1); + + /* Notify all chips using this line that an interrupt came in */ + notify_c0_chips(); + + /* Check the line again in 5ms */ + hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); +} + +/* C1 interrupt line shared by BC 1.2, TCPC, and charger */ +static void check_c1_line(void); +DECLARE_DEFERRED(check_c1_line); + +static void notify_c1_chips(void) +{ + schedule_deferred_pd_interrupt(1); + task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12, 0); + sm5803_interrupt(1); +} + +static void check_c1_line(void) +{ + /* + * If line is still being held low, see if there's more to process from + * one of the chips. + */ + if (!gpio_get_level(c1_int_line)) { + notify_c1_chips(); + hook_call_deferred(&check_c1_line_data, INT_RECHECK_US); + } +} + +static void usb_c1_interrupt(enum gpio_signal s) +{ + /* Cancel any previous calls to check the interrupt line */ + hook_call_deferred(&check_c1_line_data, -1); + + /* Notify all chips using this line that an interrupt came in */ + notify_c1_chips(); + + /* Check the line again in 5ms */ + hook_call_deferred(&check_c1_line_data, INT_RECHECK_US); +} + +static void c0_ccsbu_ovp_interrupt(enum gpio_signal s) +{ + cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event"); + pd_handle_cc_overvoltage(0); +} + +/* Must come after other header files and interrupt handler declarations */ +#include "gpio_list.h" + +/* BC 1.2 chips */ +const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = { + { + .i2c_port = I2C_PORT_USB_C0, + .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, + .flags = PI3USB9201_ALWAYS_POWERED, + }, + { + .i2c_port = I2C_PORT_SUB_USB_C1, + .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, + .flags = PI3USB9201_ALWAYS_POWERED, + }, +}; + +/* Charger chips */ +const struct charger_config_t chg_chips[] = { + [CHARGER_PRIMARY] = { + .i2c_port = I2C_PORT_USB_C0, + .i2c_addr_flags = SM5803_ADDR_CHARGER_FLAGS, + .drv = &sm5803_drv, + }, + [CHARGER_SECONDARY] = { + .i2c_port = I2C_PORT_SUB_USB_C1, + .i2c_addr_flags = SM5803_ADDR_CHARGER_FLAGS, + .drv = &sm5803_drv, + }, +}; +const unsigned int chg_cnt = ARRAY_SIZE(chg_chips); + +/* TCPCs */ +const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { + { + .bus_type = EC_BUS_TYPE_EMBEDDED, + .drv = &it83xx_tcpm_drv, + }, + { + .bus_type = EC_BUS_TYPE_I2C, + .i2c_info = { + .port = I2C_PORT_SUB_USB_C1, + .addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS, + }, + .drv = &anx7447_tcpm_drv, + .flags = TCPC_FLAGS_TCPCI_REV2_0, + }, +}; + +/* USB Retimer */ +const struct usb_mux usbc1_retimer = { + .usb_port = 1, + .i2c_port = I2C_PORT_SUB_USB_C1, + .i2c_addr_flags = TUSB544_I2C_ADDR_FLAGS0, + .driver = &tusb544_drv, +}; + +/* USB Muxes */ +const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { + { + .usb_port = 0, + .i2c_port = I2C_PORT_USB_C0, + .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, + .driver = &it5205_usb_mux_driver, + }, + { + .usb_port = 1, + .i2c_port = I2C_PORT_SUB_USB_C1, + .i2c_addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS, + .driver = &anx7447_usb_mux_driver, + .next_mux = &usbc1_retimer, + }, +}; + +void board_init(void) +{ + int on; + + if (system_get_board_version() <= 0) { + pd_set_max_voltage(5000); + c1_int_line = GPIO_USB_C1_INT_V0_ODL; + } else { + c1_int_line = GPIO_USB_C1_INT_V1_ODL; + } + + + gpio_enable_interrupt(GPIO_USB_C0_INT_ODL); + gpio_enable_interrupt(c1_int_line); + gpio_enable_interrupt(GPIO_USB_C0_CCSBU_OVP_ODL); + + /* Charger on the MB will be outputting PROCHOT_ODL and OD CHG_DET */ + sm5803_configure_gpio0(CHARGER_PRIMARY, GPIO0_MODE_PROCHOT, 1); + sm5803_configure_chg_det_od(CHARGER_PRIMARY, 1); + + /* Charger on the sub-board will be a push-pull GPIO */ + sm5803_configure_gpio0(CHARGER_SECONDARY, GPIO0_MODE_OUTPUT, 0); + + /* Turn on 5V if the system is on, otherwise turn it off */ + on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND); + board_power_5v_enable(on); +} +DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); + +void board_reset_pd_mcu(void) +{ + /* + * Nothing to do. TCPC C0 is internal, TCPC C1 reset pin is not + * connected to the EC. + */ +} + +__override void board_power_5v_enable(int enable) +{ + /* + * Motherboard has a GPIO to turn on the 5V regulator, but the sub-board + * sets it through the charger GPIO. + */ + gpio_set_level(GPIO_EN_PP5000, !!enable); + if (sm5803_set_gpio0_level(1, !!enable)) + CPRINTUSB("Failed to %sable sub rails!", enable ? "en" : "dis"); +} + +uint16_t tcpc_get_alert_status(void) +{ + /* + * TCPC 0 is embedded in the EC and processes interrupts in the chip + * code (it83xx/intc.c) + */ + + uint16_t status = 0; + int regval; + + /* Check whether TCPC 1 pulled the shared interrupt line */ + if (!gpio_get_level(c1_int_line)) { + if (!tcpc_read16(1, TCPC_REG_ALERT, ®val)) { + if (regval) + status = PD_STATUS_TCPC_ALERT_1; + } + } + + return status; +} + +int extpower_is_present(void) +{ + int chg0 = 0; + int chg1 = 0; + + sm5803_get_chg_det(0, &chg0); + sm5803_get_chg_det(1, &chg1); + + return chg0 || chg1; +} + +void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma, + int charge_mv) +{ + int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT); + + /* + * TODO(b/151955431): Characterize the input current limit in case a + * scaling needs to be applied here + */ + charge_set_input_current_limit(icl, charge_mv); +} + +int board_set_active_charge_port(int port) +{ + int is_valid_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT); + int p0_otg, p1_otg; + + if (!is_valid_port && port != CHARGE_PORT_NONE) + return EC_ERROR_INVAL; + + /* TODO(b/147440290): charger functions should take chgnum */ + p0_otg = chg_chips[0].drv->is_sourcing_otg_power(0, 0); + p1_otg = chg_chips[1].drv->is_sourcing_otg_power(1, 1); + + if (port == CHARGE_PORT_NONE) { + CPRINTUSB("Disabling all charge ports"); + + if (!p0_otg) + chg_chips[0].drv->set_mode(0, + CHARGE_FLAG_INHIBIT_CHARGE); + if (!p1_otg) + chg_chips[1].drv->set_mode(1, + CHARGE_FLAG_INHIBIT_CHARGE); + + return EC_SUCCESS; + } + + CPRINTUSB("New chg p%d", port); + + /* + * Charger task will take care of enabling charging on the new charge + * port. Here, we ensure the other port is not charging by changing + * CHG_EN + */ + if (port == 0) { + if (p0_otg) { + CPRINTUSB("Skip enable p%d", port); + return EC_ERROR_INVAL; + } + if (!p1_otg) { + chg_chips[1].drv->set_mode(1, + CHARGE_FLAG_INHIBIT_CHARGE); + } + } else { + if (p1_otg) { + CPRINTUSB("Skip enable p%d", port); + return EC_ERROR_INVAL; + } + if (!p0_otg) { + chg_chips[0].drv->set_mode(0, + CHARGE_FLAG_INHIBIT_CHARGE); + } + } + + return EC_SUCCESS; +} + +/* Vconn control for integrated ITE TCPC */ +void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) +{ + /* Vconn control is only for port 0 */ + if (port) + return; + + if (cc_pin == USBPD_CC_PIN_1) + gpio_set_level(GPIO_EN_USB_C0_CC1_VCONN, !!enabled); + else + gpio_set_level(GPIO_EN_USB_C0_CC2_VCONN, !!enabled); +} + +__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) +{ + int current; + + if (port < 0 || port > CONFIG_USB_PD_PORT_MAX_COUNT) + return; + + current = (rp == TYPEC_RP_3A0) ? 3000 : 1500; + + chg_chips[port].drv->set_otg_current_voltage(port, current, 5000); +} + +/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ +const struct pwm_t pwm_channels[] = { + [PWM_CH_KBLIGHT] = { + .channel = 0, + .flags = PWM_CONFIG_DSLEEP, + .freq_hz = 10000, + }, + + [PWM_CH_LED_RED] = { + .channel = 1, + .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, + .freq_hz = 2400, + }, + + [PWM_CH_LED_GREEN] = { + .channel = 2, + .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, + .freq_hz = 2400, + }, + + [PWM_CH_LED_BLUE] = { + .channel = 3, + .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, + .freq_hz = 2400, + } + +}; +BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); + +/* Sensor Mutexes */ +static struct mutex g_lid_mutex; +static struct mutex g_base_mutex; + +/* Sensor Data */ +static struct stprivate_data g_lis2dh_data; +static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA; + +/* Drivers */ +struct motion_sensor_t motion_sensors[] = { + [LID_ACCEL] = { + .name = "Lid Accel", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_LIS2DE, + .type = MOTIONSENSE_TYPE_ACCEL, + .location = MOTIONSENSE_LOC_LID, + .drv = &lis2dh_drv, + .mutex = &g_lid_mutex, + .drv_data = &g_lis2dh_data, + .port = I2C_PORT_SENSOR, + .i2c_spi_addr_flags = LIS2DH_ADDR1_FLAGS, + .rot_standard_ref = NULL, + .default_range = 2, /* g */ + /* We only use 2g because its resolution is only 8-bits */ + .min_frequency = LIS2DH_ODR_MIN_VAL, + .max_frequency = LIS2DH_ODR_MAX_VAL, + .config = { + [SENSOR_CONFIG_EC_S0] = { + .odr = 10000 | ROUND_UP_FLAG, + }, + [SENSOR_CONFIG_EC_S3] = { + .odr = 10000 | ROUND_UP_FLAG, + }, + }, + }, + [BASE_ACCEL] = { + .name = "Base Accel", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_LSM6DSM, + .type = MOTIONSENSE_TYPE_ACCEL, + .location = MOTIONSENSE_LOC_BASE, + .drv = &lsm6dsm_drv, + .mutex = &g_base_mutex, + .drv_data = LSM6DSM_ST_DATA(lsm6dsm_data, + MOTIONSENSE_TYPE_ACCEL), + .int_signal = GPIO_BASE_SIXAXIS_INT_L, + .flags = MOTIONSENSE_FLAG_INT_SIGNAL, + .port = I2C_PORT_SENSOR, + .i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS, + .rot_standard_ref = NULL, + .default_range = 4, /* g */ + .min_frequency = LSM6DSM_ODR_MIN_VAL, + .max_frequency = LSM6DSM_ODR_MAX_VAL, + .config = { + [SENSOR_CONFIG_EC_S0] = { + .odr = 13000 | ROUND_UP_FLAG, + .ec_rate = 100 * MSEC, + }, + [SENSOR_CONFIG_EC_S3] = { + .odr = 10000 | ROUND_UP_FLAG, + .ec_rate = 100 * MSEC, + }, + }, + }, + [BASE_GYRO] = { + .name = "Base Gyro", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_LSM6DSM, + .type = MOTIONSENSE_TYPE_GYRO, + .location = MOTIONSENSE_LOC_BASE, + .drv = &lsm6dsm_drv, + .mutex = &g_base_mutex, + .drv_data = LSM6DSM_ST_DATA(lsm6dsm_data, + MOTIONSENSE_TYPE_GYRO), + .int_signal = GPIO_BASE_SIXAXIS_INT_L, + .flags = MOTIONSENSE_FLAG_INT_SIGNAL, + .port = I2C_PORT_SENSOR, + .i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS, + .default_range = 1000 | ROUND_UP_FLAG, /* dps */ + .rot_standard_ref = NULL, + .min_frequency = LSM6DSM_ODR_MIN_VAL, + .max_frequency = LSM6DSM_ODR_MAX_VAL, + }, + [VSYNC] = { + .name = "Camera VSYNC", + .active_mask = SENSOR_ACTIVE_S0, + .chip = MOTIONSENSE_CHIP_GPIO, + .type = MOTIONSENSE_TYPE_SYNC, + .location = MOTIONSENSE_LOC_CAMERA, + .drv = &sync_drv, + .default_range = 0, + .min_frequency = 0, + .max_frequency = 1, + }, +}; + +const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); + +/* Thermistors */ +const struct temp_sensor_t temp_sensors[] = { + [TEMP_SENSOR_1] = {.name = "Memory", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_1}, + [TEMP_SENSOR_2] = {.name = "Ambient", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_2}, +}; +BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); + +#ifndef TEST_BUILD +/* This callback disables keyboard when convertibles are fully open */ +void lid_angle_peripheral_enable(int enable) +{ + int chipset_in_s0 = chipset_in_state(CHIPSET_STATE_ON); + + /* + * If the lid is in tablet position via other sensors, + * ignore the lid angle, which might be faulty then + * disable keyboard. + */ + if (tablet_get_mode()) + enable = 0; + + if (enable) { + keyboard_scan_enable(1, KB_SCAN_DISABLE_LID_ANGLE); + } else { + /* + * Ensure that the chipset is off before disabling the keyboard. + * When the chipset is on, the EC keeps the keyboard enabled and + * the AP decides whether to ignore input devices or not. + */ + if (!chipset_in_s0) + keyboard_scan_enable(0, KB_SCAN_DISABLE_LID_ANGLE); + } +} +#endif diff --git a/board/drawcia/board.h b/board/drawcia/board.h new file mode 100644 index 0000000000..a1d59b0fd6 --- /dev/null +++ b/board/drawcia/board.h @@ -0,0 +1,131 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Waddledee board configuration */ + +#ifndef __CROS_EC_BOARD_H +#define __CROS_EC_BOARD_H + +/* Select Baseboard features */ +#define VARIANT_DEDEDE_EC_IT8320 +#include "baseboard.h" + +/* System unlocked in early development */ +#define CONFIG_SYSTEM_UNLOCKED + +/* Battery */ +#define CONFIG_BATTERY_FUEL_GAUGE + +/* BC 1.2 */ +#define CONFIG_BC12_DETECT_PI3USB9201 + +/* Charger */ +#define CONFIG_CHARGER_SM5803 /* C0 and C1: Charger */ +#define CONFIG_USB_PD_VBUS_DETECT_CHARGER +#define CONFIG_USB_PD_5V_CHARGER_CTRL +#define CONFIG_CHARGER_OTG +#undef CONFIG_CHARGER_SINGLE_CHIP + +/* LED */ +#define CONFIG_LED_PWM_COUNT 1 + +/* Sensors */ +#define CONFIG_ACCEL_LIS2DE /* Lid accel */ +#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */ +#define CONFIG_SYNC /* Camera VSYNC */ +/* Sensors without hardware FIFO are in forced mode */ +#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) + +#define CONFIG_ACCEL_INTERRUPTS +/* Enable sensor fifo, must also define the _SIZE and _THRES */ +#define CONFIG_ACCEL_FIFO +/* Power of 2 - Too large of a fifo causes too much timestamp jitter */ +#define CONFIG_ACCEL_FIFO_SIZE 256 +#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) + +#define CONFIG_LID_ANGLE +#define CONFIG_LID_ANGLE_UPDATE +#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL +#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL + +#define CONFIG_SYNC_INT_EVENT \ + TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC) + +#define CONFIG_TABLET_MODE +#define CONFIG_TABLET_MODE_SWITCH +#define CONFIG_GMR_TABLET_MODE + +/* TCPC */ +#define CONFIG_USB_PD_PORT_MAX_COUNT 2 +#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP /* C0: ITE EC TCPC */ +#define CONFIG_USB_PD_TCPM_ANX7447 /* C1: ANX TCPC + Mux */ +#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 1 + +/* Thermistors */ +#define CONFIG_TEMP_SENSOR +#define CONFIG_THERMISTOR +#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B +#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PP3300_A + +/* USB Mux and Retimer */ +#define CONFIG_USB_MUX_IT5205 /* C1: ITE Mux */ +#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* Required for ITE Mux */ + +#define CONFIG_USBC_RETIMER_TUSB544 /* C1 Redriver: TUSB544 */ + +#ifndef __ASSEMBLER__ + +#include "gpio_signal.h" +#include "registers.h" + +enum chg_id { + CHARGER_PRIMARY, + CHARGER_SECONDARY, + CHARGER_NUM, +}; + +enum pwm_channel { + PWM_CH_KBLIGHT, + PWM_CH_LED_RED, + PWM_CH_LED_GREEN, + PWM_CH_LED_BLUE, + PWM_CH_COUNT, +}; + +/* Motion sensors */ +enum sensor_id { + LID_ACCEL, + BASE_ACCEL, + BASE_GYRO, + VSYNC, + SENSOR_COUNT +}; + +enum temp_sensor_id { + TEMP_SENSOR_1, + TEMP_SENSOR_2, + TEMP_SENSOR_COUNT +}; + +/* List of possible batteries */ +enum battery_type { + BATTERY_LGC15, + BATTERY_PANASONIC_AP15O5L, + BATTERY_SANYO, + BATTERY_SONY, + BATTERY_SMP_AP13J7K, + BATTERY_PANASONIC_AC15A3J, + BATTERY_LGC_AP18C8K, + BATTERY_MURATA_AP18C4K, + BATTERY_LGC_AP19A8K, + BATTERY_LGC_G023, + BATTERY_TYPE_COUNT, +}; + +int board_is_sourcing_vbus(int port); + +#endif /* !__ASSEMBLER__ */ + +#endif /* __CROS_EC_BOARD_H */ diff --git a/board/drawcia/build.mk b/board/drawcia/build.mk new file mode 100644 index 0000000000..00e4e0bb5d --- /dev/null +++ b/board/drawcia/build.mk @@ -0,0 +1,15 @@ +# -*- makefile -*- +# Copyright 2020 The Chromium OS Authors. All rights reserved. +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. +# +# Board specific files build +# + +CHIP:=it83xx +CHIP_FAMILY:=it8320 +CHIP_VARIANT:=it8320dx +BASEBOARD:=dedede + +board-y=board.o led.o usb_pd_policy.o +board-$(CONFIG_BATTERY_SMART)+=battery.o diff --git a/board/drawcia/ec.tasklist b/board/drawcia/ec.tasklist new file mode 100644 index 0000000000..607a1407fd --- /dev/null +++ b/board/drawcia/ec.tasklist @@ -0,0 +1,24 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* + * See CONFIG_TASK_LIST in config.h for details. + */ + +#define CONFIG_TASK_LIST \ + TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, LARGER_TASK_STACK_SIZE) \ + TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, LARGER_TASK_STACK_SIZE) \ + TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \ + TASK_ALWAYS(HOSTCMD, host_command_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \ + TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \ + TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, VENTI_TASK_STACK_SIZE) diff --git a/board/drawcia/gpio.inc b/board/drawcia/gpio.inc new file mode 100644 index 0000000000..cfa9841d5e --- /dev/null +++ b/board/drawcia/gpio.inc @@ -0,0 +1,141 @@ +/* -*- mode:c -*- + * + * Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Declare symbolic names for all the GPIOs that we care about. + * Note: Those with interrupt handlers must be declared first. */ + +/* Power State interrupts */ +GPIO_INT(SLP_S4_L, PIN(I, 5), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SLP_S3_L, PIN(H, 3), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt) +GPIO_INT(SLP_S0_L, PIN(E, 4), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SLP_SUS_L, PIN(G, 2), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(VCCIN_AUX_VID0, PIN(D, 0), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(RSMRST_PWRGD_L, PIN(E, 1), GPIO_INT_BOTH | GPIO_PULL_UP, power_signal_interrupt) +GPIO_INT(CPU_C10_GATE_L, PIN(G, 1), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(PG_DRAM_OD, PIN(D, 3), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt) +GPIO_INT(PG_PP1050_ST_OD, PIN(L, 1), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(VCCIN_AUX_VID1, PIN(K, 1), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(PG_VCCIO_EXT_OD, PIN(D, 7), GPIO_INT_BOTH, baseboard_all_sys_pgood_interrupt) +GPIO_INT(ESPI_RESET_L, PIN(D, 2), GPIO_INT_FALLING | GPIO_SEL_1P8V, espi_reset_pin_asserted_interrupt) + +GPIO_INT(H1_EC_PWR_BTN_ODL, PIN(E, 2), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt) +#ifdef CONFIG_LOW_POWER_IDLE +/* Used to wake up the EC from Deep Doze mode when writing to console */ +GPIO_INT(UART1_RX, PIN(B, 0), GPIO_INT_BOTH, uart_deepsleep_interrupt) /* UART_DBG_TX_EC_RX */ +#endif + +/* USB-C interrupts */ +GPIO_INT(USB_C0_INT_ODL, PIN(K, 0), GPIO_INT_FALLING | GPIO_PULL_UP, usb_c0_interrupt) /* BC12 and charger */ +GPIO_INT(USB_C1_INT_V0_ODL, PIN(B, 5), GPIO_INT_FALLING | GPIO_PULL_UP, usb_c1_interrupt) /* TCPC, charger, BC12 - board version 0 */ +GPIO_INT(USB_C1_INT_V1_ODL, PIN(E, 6), GPIO_INT_FALLING | GPIO_PULL_UP, usb_c1_interrupt) /* TCPC, charger, BC12 - board version 1 */ +GPIO_INT(USB_C0_CCSBU_OVP_ODL, PIN(K, 6), GPIO_INT_FALLING | GPIO_PULL_UP, c0_ccsbu_ovp_interrupt) /* Fault protection */ + +/* Other interrupts */ +GPIO_INT(LID_OPEN, PIN(F, 3), GPIO_INT_BOTH, lid_interrupt) +GPIO_INT(LID_360_L, PIN(A, 7), GPIO_INT_BOTH, gmr_tablet_switch_isr) +GPIO_INT(VOLDN_BTN_ODL, PIN(I, 6), GPIO_INT_BOTH, button_interrupt) +GPIO_INT(VOLUP_BTN_ODL, PIN(I, 7), GPIO_INT_BOTH, button_interrupt) +GPIO_INT(BASE_SIXAXIS_INT_L, PIN(J, 0), GPIO_INT_FALLING | GPIO_SEL_1P8V, lsm6dsm_interrupt) +GPIO_INT(CAM_EC_VSYNC, PIN(C, 7), GPIO_INT_RISING, sync_interrupt) +GPIO_INT(EC_WP_OD, PIN(A, 6), GPIO_INT_BOTH, switch_interrupt) + +/* Power sequence GPIOs */ +GPIO(EC_AP_RTCRST, PIN(K, 2), GPIO_OUT_LOW) +GPIO(EC_AP_PWR_BTN_ODL, PIN(B, 6), GPIO_ODR_HIGH) +GPIO(EC_AP_DPWROK, PIN(L, 7), GPIO_OUT_LOW) +GPIO(EC_AP_RSMRST_L, PIN(H, 0), GPIO_OUT_LOW) +GPIO(EC_AP_WAKE_ODL, PIN(D, 5), GPIO_ODR_HIGH) +GPIO(SYS_RST_ODL, PIN(D, 1), GPIO_ODR_HIGH) +GPIO(EC_AP_SYS_PWROK, PIN(F, 2), GPIO_OUT_LOW) +GPIO(PG_PP5000_U_OD, PIN(E, 3), GPIO_INPUT) +GPIO(EN_PP3300_A, PIN(C, 5), GPIO_OUT_LOW) +GPIO(EC_AP_PCH_PWROK_OD, PIN(D, 6), GPIO_ODR_LOW) +GPIO(EN_PP5000_U, PIN(K, 5), GPIO_OUT_LOW) +/* TODO(b:149775160) - Modify if needed if we ever use this signal. */ +GPIO(EN_VCCST, PIN(D, 4), GPIO_INPUT) +GPIO(EN_VCCIO_EXT, PIN(B, 2), GPIO_OUT_LOW) +GPIO(EC_PROCHOT_ODL, PIN(I, 1), GPIO_ODR_HIGH | GPIO_SEL_1P8V) +GPIO(EC_AP_VCCST_PWRGD_OD, PIN(E, 5), GPIO_ODR_LOW) +GPIO(ALL_SYS_PWRGD, PIN(B, 7), GPIO_OUT_LOW) +GPIO(EN_SLP_Z, PIN(K, 3), GPIO_OUT_LOW) + +/* Required for icelake chipset code, but implemented through other means for dedede */ +UNIMPLEMENTED(PG_EC_DSW_PWROK) +UNIMPLEMENTED(PG_EC_ALL_SYS_PWRGD) + +/* I2C pins - Alternate function below configures I2C module on these pins */ +GPIO(EC_I2C_EEPROM_SCL, PIN(B, 3), GPIO_INPUT) +GPIO(EC_I2C_EEPROM_SDA, PIN(B, 4), GPIO_INPUT) +GPIO(EC_I2C_BATTERY_SCL, PIN(C, 1), GPIO_INPUT) +GPIO(EC_I2C_BATTERY_SDA, PIN(C, 2), GPIO_INPUT) +GPIO(EC_I2C_SENSOR_SCL, PIN(F, 6), GPIO_INPUT | GPIO_SEL_1P8V) +GPIO(EC_I2C_SENSOR_SDA, PIN(F, 7), GPIO_INPUT | GPIO_SEL_1P8V) +GPIO(EC_I2C_SUB_USB_C1_SCL, PIN(E, 0), GPIO_INPUT) +GPIO(EC_I2C_SUB_USB_C1_SDA, PIN(E, 7), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_SCL, PIN(A, 4), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_SDA, PIN(A, 5), GPIO_INPUT) + +/* USB pins */ +GPIO(EN_USB_C0_CC1_VCONN, PIN(H, 4), GPIO_OUT_LOW) +GPIO(EN_USB_C0_CC2_VCONN, PIN(H, 6), GPIO_OUT_LOW) +GPIO(EC_AP_USB_C0_HPD, PIN(L, 4), GPIO_OUT_LOW) +GPIO(EC_AP_USB_C1_HDMI_HPD, PIN(K, 7), GPIO_OUT_LOW) +GPIO(USB_C0_FRS, PIN(C, 4), GPIO_OUT_LOW) +GPIO(HDMI_SEL_L, PIN(C, 6), GPIO_OUT_HIGH) + +/* MKBP event synchronization */ +GPIO(EC_AP_MKBP_INT_L, PIN(L, 5), GPIO_ODR_HIGH) + +/* Misc pins which will run to the I/O board */ +GPIO(EC_SUB_IO_1_1, PIN(L, 3), GPIO_INPUT) +GPIO(EC_SUB_IO_1_2, PIN(F, 0), GPIO_INPUT) +GPIO(EC_SUB_IO_2_1, PIN(F, 1), GPIO_INPUT) +GPIO(EC_SUB_IO_2_2, PIN(L, 2), GPIO_INPUT) + +/* Misc */ +GPIO(EN_BL_OD, PIN(K, 4), GPIO_OUT_LOW) +GPIO(EC_ENTERING_RW, PIN(G, 0), GPIO_OUT_LOW) +GPIO(CCD_MODE_ODL, PIN(H, 5), GPIO_INPUT) +GPIO(EC_BATTERY_PRES_ODL, PIN(I, 4), GPIO_INPUT) +GPIO(PEN_DET_ODL, PIN(J, 1), GPIO_INPUT | GPIO_PULL_UP) +GPIO(EN_KB_BL, PIN(J, 3), GPIO_OUT_LOW) /* Currently unused */ +GPIO(ECH1_PACKET_MODE, PIN(H, 1), GPIO_OUT_LOW) + +/* NC pins, enable internal pull-down to avoid floating state. */ +GPIO(GPIOC0_NC, PIN(C, 0), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOC3_NC, PIN(C, 3), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOG3_NC, PIN(G, 3), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOG4_NC, PIN(G, 4), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOG5_NC, PIN(G, 5), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOG6_NC, PIN(G, 6), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOG7_NC, PIN(G, 7), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOJ4_NC, PIN(J, 4), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOJ5_NC, PIN(J, 5), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOJ6_NC, PIN(J, 6), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOL6_NC, PIN(L, 6), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOM6_NC, PIN(M, 6), GPIO_INPUT | GPIO_PULL_DOWN) + +/* Alternate functions GPIO definitions */ +/* UART */ +ALTERNATE(PIN_MASK(B, BIT(0) | BIT(1)), 0, MODULE_UART, 0) /* UART for debug */ + +/* I2C */ +ALTERNATE(PIN_MASK(B, BIT(3) | BIT(4)), 0, MODULE_I2C, 0) /* I2C0 */ +ALTERNATE(PIN_MASK(C, BIT(1) | BIT(2)), 0, MODULE_I2C, 0) /* I2C1 */ +ALTERNATE(PIN_MASK(F, BIT(6) | BIT(7)), 0, MODULE_I2C, GPIO_SEL_1P8V) /* I2C2 - 1.8V */ +ALTERNATE(PIN_MASK(E, BIT(0) | BIT(7)), 0, MODULE_I2C, 0) /* I2C4 */ +ALTERNATE(PIN_MASK(A, BIT(4) | BIT(5)), 0, MODULE_I2C, 0) /* I2C5 */ + +/* ADC */ +ALTERNATE(PIN_MASK(L, BIT(0)), 0, MODULE_ADC, 0) /* ADC13: EC_SUB_ANALOG */ +ALTERNATE(PIN_MASK(I, BIT(0) | BIT(2) | BIT(3)), 0, MODULE_ADC, 0) /* ADC0: EC_VSNS_PP3300_A, ADC2: TEMP_SENSOR_1, ADC3: TEMP_SENSOR_2 */ + +/* DAC */ +ALTERNATE(PIN_MASK(J, BIT(2)), 0, MODULE_DAC, 0) /* DAC2: EC_AP_PSYS */ + +/* PWM */ +ALTERNATE(PIN_MASK(A, BIT(0) | BIT(1) | BIT(2) | BIT(3)), 0, MODULE_PWM, 0) /* KB_BL_PWM, LED_[R,G,B]_ODL */ diff --git a/board/drawcia/led.c b/board/drawcia/led.c new file mode 100644 index 0000000000..b19e594fbd --- /dev/null +++ b/board/drawcia/led.c @@ -0,0 +1,82 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Waddledee specific PWM LED settings. */ + +#include "common.h" +#include "ec_commands.h" +#include "led_pwm.h" +#include "pwm.h" +#include "util.h" + +const enum ec_led_id supported_led_ids[] = { + EC_LED_ID_POWER_LED, +}; +const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); + +/* + * Board has one physical LED with red, green, and blue + */ +struct pwm_led led_color_map[EC_LED_COLOR_COUNT] = { + /* Red, Green, Blue */ + [EC_LED_COLOR_RED] = { 100, 0, 0 }, + [EC_LED_COLOR_GREEN] = { 0, 100, 0 }, + [EC_LED_COLOR_BLUE] = { 0, 0, 100 }, + [EC_LED_COLOR_YELLOW] = { 50, 50, 0 }, + [EC_LED_COLOR_WHITE] = { 50, 50, 50 }, + [EC_LED_COLOR_AMBER] = { 70, 30, 0 }, +}; + +/* One logical LED with red, green, and blue channels. */ +struct pwm_led pwm_leds[CONFIG_LED_PWM_COUNT] = { + { + .ch0 = PWM_CH_LED_RED, + .ch1 = PWM_CH_LED_GREEN, + .ch2 = PWM_CH_LED_BLUE, + .enable = &pwm_enable, + .set_duty = &pwm_set_duty, + }, +}; + +void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) +{ + memset(brightness_range, '\0', + sizeof(*brightness_range) * EC_LED_COLOR_COUNT); + brightness_range[EC_LED_COLOR_RED] = 100; + brightness_range[EC_LED_COLOR_GREEN] = 100; + brightness_range[EC_LED_COLOR_BLUE] = 100; + brightness_range[EC_LED_COLOR_YELLOW] = 100; + brightness_range[EC_LED_COLOR_WHITE] = 100; + brightness_range[EC_LED_COLOR_AMBER] = 100; +} + +int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) +{ + enum pwm_led_id pwm_id; + + /* Convert ec_led_id to pwm_led_id. */ + if (led_id == EC_LED_ID_POWER_LED) + pwm_id = PWM_LED0; + else + return EC_ERROR_UNKNOWN; + + if (brightness[EC_LED_COLOR_RED]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_RED); + else if (brightness[EC_LED_COLOR_GREEN]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_GREEN); + else if (brightness[EC_LED_COLOR_BLUE]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_BLUE); + else if (brightness[EC_LED_COLOR_YELLOW]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_YELLOW); + else if (brightness[EC_LED_COLOR_WHITE]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_WHITE); + else if (brightness[EC_LED_COLOR_AMBER]) + set_pwm_led_color(pwm_id, EC_LED_COLOR_AMBER); + else + /* Otherwise, the "color" is "off". */ + set_pwm_led_color(pwm_id, -1); + + return EC_SUCCESS; +} diff --git a/board/drawcia/usb_pd_policy.c b/board/drawcia/usb_pd_policy.c new file mode 100644 index 0000000000..0fc682b28e --- /dev/null +++ b/board/drawcia/usb_pd_policy.c @@ -0,0 +1,80 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include "battery_smart.h" +#include "charge_manager.h" +#include "charger.h" +#include "chipset.h" +#include "common.h" +#include "console.h" +#include "driver/charger/sm5803.h" +#include "driver/tcpm/tcpci.h" +#include "usb_pd.h" + +#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) + +int pd_check_vconn_swap(int port) +{ + /* Allow VCONN swaps if the AP is on */ + return chipset_in_state(CHIPSET_STATE_ANY_SUSPEND | CHIPSET_STATE_ON); +} + +void pd_power_supply_reset(int port) +{ + int prev_en; + + if (port < 0 || port >= CONFIG_USB_PD_PORT_MAX_COUNT) + return; + + /* TODO(b/147440290): charger functions should take chgnum */ + prev_en = chg_chips[port].drv->is_sourcing_otg_power(port, port); + + /* Disable Vbus */ + chg_chips[port].drv->enable_otg_power(port, 0); + + /* Discharge Vbus if previously enabled */ + if (prev_en) + sm5803_set_vbus_disch(port, 1); + +#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT + /* Give back the current quota we are no longer using */ + charge_manager_source_port(port, 0); +#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ + + /* Notify host of power info change. */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); +} + +int pd_set_power_supply_ready(int port) +{ + enum ec_error_list rv; + + /* Disable charging */ + rv = chg_chips[port].drv->set_mode(port, CHARGE_FLAG_INHIBIT_CHARGE); + if (rv) + return rv; + + /* Disable Vbus discharge */ + sm5803_set_vbus_disch(port, 0); + + /* Provide Vbus */ + chg_chips[port].drv->enable_otg_power(port, 1); + +#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT + /* Ensure we advertise the proper available current quota */ + charge_manager_source_port(port, 1); +#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ + + /* Notify host of power info change. */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); + + return EC_SUCCESS; +} + +int pd_snk_is_vbus_provided(int port) +{ + return sm5803_is_vbus_present(port); +} -- cgit v1.2.1